Used Scm Si 12 B for sale (585)

Condition: excellent (used), 11/9 kW motor, ground clearance 160 cm, table length 320 cm Psdpfsxgdv Hsx Adysgu

Condition: used, Year of construction: 2010, operating hours: 750 h, functionality: fully functional, SCM panel saw Type: SI 450 EP Class Sliding table length 3200 mm Motor power 7.5 kW Motorized rip fence 1500 mm Frame table with longitudinal fence and frame support Table extension Mitre fence (no picture) Pedoxftigjpfx Adyogu

Condition: excellent (used), SCM nova si40 panel saw Sliding table 320 cm, Main motor 7 kW, Scoring unit 0.75 kW, Right-side fence, motorized adjustment up to 1226 mm, 2 blade speeds: 3500 and 5000 rpm, Digital readout from the sliding table, Podpfoxcpbtsx Adyegu Used machine, in very good condition.

Condition: used, Year of construction: 2011, WINCUT Numerical Control Working dimensions mm 3800 x 3800 Max blade projection (mm) 107 Front panel loading N. 10 pincers on the pusher carriage Lateral aligner Scoring group (max blade diameter / power) 160 / Kw 1,5 Main blade unit (max blade diameter / power) 380 / Kw 7.5 Adjustable speed of the blade carriage (m/min) 1 - 135 Pusher carriage speed 70 m/min N. 3 air curtain front benches TECHNICAL DETAILS TO CHECK WHEN THE MACHINE WILL BE IN OUR WAREHOUSES Pedpfx Ajwwrywjdyogu

Condition: used, Year of construction: 2005, Carriage length: 3200 mm Cutting width at the width stop: 1300 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 150 mm Scorer: Yes Saw blade height adjustment: electric / position control Swivel adjustment saw blade: electric / position control Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: Digital Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 450mm Speeds: 3 Pgodpfx Ajuix Egjdyju Motor power: 7.5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3500mm Machine width: 2200mm weight: 1000kg

Condition: excellent (used), Year of construction: 1998, planing height: 180 mm, spindle diameter: 40 mm, planing width: 180 mm, working height: 120 mm, overall weight: 1,200 kg, Four-side planer SINTEX, 4 spindles Pgedpow Sg Ukofx Adysu

Condition: excellent (used), SCM Sintex XL Four-Side Planer Working width: 23-180 mm Working height: 6-100 mm Number of spindles: 4 Spindle arrangement: Bottom: 7.5 kW Right: 5.5 kW Pedpfxew Hbf Io Adyjgu Left Top Minimum length of workpiece: 300 mm Spindle diameter: 35 mm Feed speed adjustable by inverter: 4-12 m/min Technical documentation CE certificate

Condition: excellent (used), Panel saw SCM Si400e 9/24 Technical specifications: Carriage length: 3200 mm Pgodpsw Rkz Sjfx Adyju Electrically adjustable blade angle Electrically operated blade lifting Electric adjustment of right-side rip fence Cutting width right: 1270 mm Maximum cutting height: 130 mm Blade speed variable via belt Scoring unit speed: 6500 rpm Blade guard Emergency stop Main motor power: 5.5 kW Scoring unit motor power: 0.75 kW Overall dimensions: Height: 1400 mm Width: 4300 mm Length: 3550 mm

Condition: excellent (used), Year of construction: 2012, Panel saw SCM Sigma Impact with rear loading system. Pjdpfx Asw Rdkajdyogu Machine dismantled.

Condition: used, Panel saw SCM Si400 EP, sliding table 320 cm, scoring saw 0.75 kW, 2-axis, electrically adjustable, scoring blade diameter 120 mm, bore 20 mm, Psdpfew Imn Nsx Adyogu blade tilt up to 45° motorized adjustment, blade height motorized adjustment, right-side fence motorized adjustment up to 1460 mm, main motor 7.5 kW (speeds 3000-4000-5000 rpm), max. blade diameter 400 mm, digital display on the fence on the sliding table, sliding table tiltable at an angle, used machine, good condition, all adjustments fully operational.

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Pgodpfevxi Ddsx Adyou Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: ready for operation (used), Technical characteristics X axis travel : 2850 mm Y axis travel : 1600 mm Z axis travel : 250 mm Part height : 250 mm Electrospindle 3 axis spindle, 7.5 kW HSK F63 spindle Revolver-type tool magazine, 12 tools Drilling unit : 9 spindles 5 vertical spindles 4 horizontal spindles Work surface : Profiled aluminum table Work table length : 2600 mm Work table width : 1080 mm Controls : Control panel Pgodpfxjtuh D Us Adyeu On PC Windows XP Pro Software Xilog 3 and ROUTELINK Remote control type 0102 BECKER vacuum pump 90 m3/h Power and Motors Voltage: 380 V Pluging: Three-phased Power: 15 Kw Motor: 10 CV Overall dimensions Lenght: 6100 mm Width: 4500 mm Height: 2350 mm Weight: 3500 Kg

Condition: good (used), functionality: fully functional, SCM SIGMA N horizontal panel saw Podpfx Asw Du Ecedyjgu Available September/October Price for loaded machine Transport and installation available at extra cost.

Condition: used, No. 3218 CNC machining center SCM Record 120S Used, can still be viewed in operation Compact CNC machining center for all milling and drilling work in solid wood, chipboard, MDF and plastic Technical data (according to manufacturer's brochure): Travel X-Y-Z 2850 x 1355 x 250 mm High-performance milling spindle / milling unit 7.5 kW, 900 - 18000 rpm Automatic tool changer with 10 ISO 30 tool holders Drilling unit with 5 individually retrievable vertical drilling spindles in X Pgsdpfov Uz Hvox Adyju 4 horizontal drilling spindles Drill holder M 10 Routolink control with 10.5” color monitor Sale on behalf of customer, ex location near 69124 Heidelberg, without disassembly, transport and assembly Disassembly, loading and transport by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 1999, cutting length 3.200 mm cutting width 3.200 mm cutting hight 65 mm saw blade DM max. 300 mm Pjdohvan Ispfx Adyjgu saw blade motor: 5,5 kW scoring unit DM max. 160 mm motor scoring unit 1,5 kW front support tables 3 Stk. 1 x 2500 x 500 & 2 x 1500 x 500 mm cutting optimisation program no. of grippers 8 pcs saw blade hight adjustment on THK guides pressure beam with openings side pusher (alignment) saw blade quick change system suction DM1 x 120 & 1 x 150 mm space requirement L x B 5700 x 6000 mm weight approx. 2500 kg INVERTER NEW Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2001, condition: excellent (used), Trolley length 3200mm Electric saw angle adjustment Electric saw lift Cutting width on the right 1700mm Main motor power 7.5kw Scoring motor power 0.75 kw Saw size max/min: 400/300mm CE Year 2001 Pjdpfx Adolcfhtjysgu

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Pgedjvyuqfepfx Adyou

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: AC, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, operating pressure: 6 bar, Edgebanding machine overhauled in perfect working order, edge in rolls max 3mm Pgjdpjv Nyzujfx Adysu Solid wood edge max 12mm thickness max 56, with rounding unit 2 motors. Use and maintenance manuals, programming and wiring diagram

Condition: used, Year of construction: 2001, Type Record 121 Number of working axes 3+ Useful working area axis X-Y-Z 2600-1080-250 mm Table dimensions 2600 x 1080mm Spindle speed 900 - 18000 rpm Pedpfx Adjv Dtiboysgu Number of milling spindles: 1 Tool change positions: 12 Tool clamping system HSK63F Work table Matrix table The main engine is 7.5 kw Vacuum pump performance 250/300 m3/h Vacuum motor 6.5 kw The diameter of the extraction socket is 150 mm Air pressure 7 bar Voltage 380V/50HZ Transport dimensions 3700x3200x2600mm Weight 3500 kg The price is 15500 Eur

Year of construction: 2010, condition: like new (used), I sell the panel beam saw SCM Sigma Prima 67. Year 2010. Cutting size 3300x3200mm. Cutting height 67mm. Max saw blade diameters 320 + 160mm Pgjdpfxsi Evbzj Adyeu Main motor 7,5kW Scoring motor 1,3kW Total power 10kW Total area covered W.5400mm x D.7000mm 8 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. WinCut optimising software included. Label printing included. Software Ottimo Perfect Cut included. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2001, operating hours: 62,128 h, functionality: fully functional, machine/vehicle number: AA1011842, travel distance X-axis: 2,800 mm, travel distance Y-axis: 1,620 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 2,800 mm, feed length Y-axis: 1,620 mm, feed length Z-axis: 350 mm, Equipment: documentation/manual, rotational speed infinitely variable, The CNC machine Record 121 by SCM is in very good working condition and currently still in use within our production facility. It has been regularly maintained and delivers reliable performance. Potential buyers are welcome to schedule a visit and test the machine in operation. Pjdpfx Aswm Apzsdysgu

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Pgsdpfovwga Hex Adyou

Condition: used, machine/vehicle number: 008132, Type of edging: Thin edge, Thick edge Pgsdpfjw Idc Rsx Adyou Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), Catalog number 7288 TECHNICAL DATA - max. width of the processed element 230mm - max. height of the processed element 130mm 6 spindles: 1) horizontal lower 230mm 7.5kW 2) vertical right 130mm 3) vertical left 130mm; (2nd and 3rd spindle) 15kW spindle 3 electrically adjustable right/left 4) horizontal upper 230mm 11kW 4 spindle electrically adjustable up/down 5) horizontal lower 230mm 7.5kW 6) universal 230mm, adjustable at an angle of 360° 11kW - all spindles adjustable up/down, right/left - all spindles equipped with a brake - spindle diameter 40mm - 4 input, pulling, metal, toothed rollers from above, including 2 double - 3 output pulling, smooth, rubber rollers from above, including 2 double - 2 output, rubber, pulling rollers from below Psderwmp Uepfx Adyjgu - 3 side clamps from below - smooth feed speed adjustment - pneumatically pressed rollers - 3kW feed motor - electric planing thickness adjustment - 0.37kW body lifting motor - length of the insertion table 2480mm - closed in the cabin - central lubrication of the table - diameters of the extraction nozzle 130mm, 140mm, 4x125mm - dimensions length/width/height 4960x1760x1700mm - weight about 3500kg ADVANTAGES - Italian production - for 6 heads - unpainted machine - all spindles equipped with a brake - the last universal spindle - used planer, very good condition Original photos Net price: PLN 54900 Net price: EUR 12920 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2012, CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Podpfxswnhccj Adyjgu Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 24 - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Capacity [m³/h]: 250 - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Year: 2012 - Documentation available: No - Serial number: AA2/002032 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets