Used Screw Compressor System for sale (43,988)

Condition: good (used), Year of construction: 2007, overall weight: 4,215 kg, volume flow: 1,506 m³/h, pressure (max.): 10 bar, Equipment: type plate available, PRODUCT - CompAir TYPE - L160 S/N - 349031/0705 Cjdspxm Exopfx Aknjhc YEAR - 2007 POWER (kW) - 160 OUTPUT. (m3/min) - 25.1 CIS (bar) 10

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system Codpszu Aibsfx Aknohc - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Equipment: documentation/manual, refrigerant dryer, type plate available, We offer for sale a screw compressor with an integrated condensation dryer, type Aircraft / Fini A-K-Max 7.5-10-270 K (IE3), manufactured in 2021 by Aircraft. It is manufactured and marked according to CE standards (European conformity). The compressor has been used sparingly and regularly serviced, with documented operating history, including Czech operating and maintenance manuals. Technical parameters: Capacity: 1050 l/min, Maximum pressure: 10 bar, Tank size: 270 l, Dimensions: L: 1200, W: 680, H: 1540 mm, Weight: 280 kg, Electric motor power: 7.5 kW, Voltage: 400 V, Sound pressure level Lp 62 dB. The compressor is in very good technical condition and is ready for immediate use. It can be viewed at our warehouse in Přerov. Cedpszy Spzsfx Aknehc

Condition: used, Year of construction: 2001, operating hours: 90,000 h, overall weight: 7,000 kg, power: 355 kW (482.67 HP), operating pressure: 10 bar, pressure (max.): 10 bar, type of cooling: water, Good working oil-free compressor, also suitable for spare parts (motor, airend, coolers) Cjdpfx Aoxbdppoknohc

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 9.7 m³/h, operating pressure: 8 bar, pressure (min.): 4.5 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Fully functional Atlas Copco screw compressor, model GA 55, in new condition. Cjdpfx Aozzq Ewsknohc

Condition: good (used), Year of construction: 2012, operating hours: 15,796 h, Maximum pressure: 8 bar Delivery rate: 18.4 m3/h Rated power: 110 kW Codpfx Aey Tui Tsknohc Compressor mains voltage: 400 V / 50 Hz Dryer mains voltage: 400 V / 50 Hz Compressor has been regularly maintained; has been out of operation for 2 years.

Condition: excellent (used), Year of construction: 1998, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 01100145, noise level: 70 dB, Used compressed air compressor Brand: Worthington creyssensac Model: RLR 75A5 AIR Year: 1998 Serial No.: 01100145 Chsdpjrg Dcuefx Aknec Working hours: 7358h Features: - Rated power: 55kW/75HP - 8 bar maximum pressure - Flow rate: 573 m3/h - Sound level: ± 70dB - Weight: ± 1.179 - Ø compressed air outlet: 2" - Total weight: 1170kg

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler Cjdpfjx Dihcox Aknehc - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Condition: like new (used), Year of construction: 2014, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 1058, overall weight: 7,000 kg, total length: 3,706 mm, total width: 2,276 mm, total height: 2,360 mm, power: 315 kW (428.28 HP), volume flow: 2,382 m³/h, operating pressure: 15 bar, pressure (min.): 4 bar, pressure (max.): 15 bar, noise level: 79 dB, type of cooling: air, Equipment: compressor, documentation/manual, type plate available, Kaeser FSD571SFC, 315kW Variable speed drive screw compressor, purchased and installed in 2014, the machines were never commissioned or used, so have only 2 hours manufacturers hours use. Can be viewed running in our facility in York UK prior to purchase Chjdezww H Tjpfx Aknec

Condition: used, BOGE C 9 Screw Compressor, 7.5 kW / 10 bar Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Machine Type: Screw Compressor / Industrial Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar For sale is a used BOGE C 9 screw compressor, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system, separate stroboscope hand lamp, connection cable and operating manual. The compressor is suitable for supplying compressed air to machines, workshops, production facilities and manufacturing companies, as well as for general industrial compressed air applications. Operation is via the BOGE base control system with a digital operating and display panel. Technical data: Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Equipment Type: Screw Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar Motor Power: 7.5 kW Motor Speed: 3000 min⁻¹ Operating Hours (according to display): 15,749 h Control System: BOGE base control CE Marking: present Made in Germany ELMED HELIO-STROB: Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Equipment Type: Stroboscope Measuring System Mains Connection: 115 / 230 V AC Mains Frequency: 50–60 Hz Max. Power Consumption: 80 VA External Clock Input: present CE Marking: present BOGE base control system Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp External clock input Digital display Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. BOGE operating display shown in the on state. ELMED HELIO-STROB shown in the on state. Nameplates present. Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Shipping Data: Chjdpfszxpi Nex Aknec Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of equipment: approx. 219 kg plus cable and operating manual Shipping by freight forwarder possible Scope of Delivery: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), functionality: fully functional, Description: Rotary screw compressor ZR 4-52 Cedpfx Aevyrbnoknshc Characteristics: Capacity 8.00 bar Power 250 kW Voltage 500 V Air flow rate l/min 634 Running hours at last maintenance: 57287

Condition: good (used), functionality: fully functional, power: 250 kW (339.91 HP), Description: Screw compressor ZR 4-52 with drum dryer Characteristics: Chsdovyrlaspfx Aknjc Capacity 8.00 bar Power 250 kW Voltage 500 V Air flow rate l/min 634 Running hours at last maintenance: 50307

Condition: excellent (used), Year of construction: 2011, operating hours: 53,400 h, functionality: fully functional, power: 22 kW (29.91 HP), volume flow: 2.94 m³/h, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, Serial nr. 1170 Maintenance carried out by Kaeser Chsdpeym Axzjfx Aknec

Condition: excellent (used), Year of construction: 2005, volume flow: 5 m³/h, pressure (min.): 11 bar, KAESER BSD 62 screw compressor Engine: 30 kW Capacity: 5.00 m³/min. Pressure: 11 bar Csdpfx Aoz Irh Rjknohc

Condition: excellent (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 1068, overall weight: 270 kg, power: 5.5 kW (7.48 HP), fuel type: electric, volume flow: 42 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: type plate available, Kaeser Airtower 8 Screw Compressor (5.5 kW, 700 l/min) with Refrigeration Dryer /ct2499a/ Kaeser Airtower 8 screw compressor with refrigeration dryer for sale; serviced from new and in excellent condition. Manufacturer: Kaeser Airtower 8 + TU11 refrigeration dryer Serial number: 1068 Year of manufacture: 2000 Cedjz Er A Ajpfx Aknohc Operating hours: 47,000 h Power: 5.5 kW Air delivery: 700 l/min (42 m³/h) Pressure: 10 bar Motor speed: 3000 rpm Rated voltage: 400 V, 3-phase, 50 Hz Rated current: 12 A Pipe connection: 3/4 inch Includes Kaeser automatic condensate drain and filter Overall dimensions: Length: 675 mm Width: 625 mm Height: 1285 mm Weight: 270 kg

Condition: excellent (used), Year of construction: 1997, operating hours: 88,000 h, functionality: fully functional, overall weight: 1,200 kg, motor manufacturer: kaeser, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 690 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER CS121 Screw Compressor (75 kW, 10.3 m³/min, 10 bar) KAESER CS121 75 kW, 10 bar screw compressor for sale in excellent condition. Maintained and fully serviced since new. Last major service performed at the recorded operating hours. Manufacturer: Kaeser CS121 Year of manufacture: 1997 Sigma Control system Serial number: 1211178 Operating pressure: 10 bar Power: 75 kW Capacity: 11 m³/min (695 m³/h) Cedez A Iruepfx Aknjhc Operating hours: Standby: 86,033 h / Loaded: 28,900 h Sigma Control system Motor speed: 1500 rpm Electrical power: 75 kW Overall dimensions: Length 1960 x Width 1240 (+150) x Height 1440 mm Weight: 1200 kg

Condition: used, Year of construction: 2009, operating hours: 73,000 h, functionality: fully functional, power: 75 kW (101.97 HP), pressure (min.): 4 bar, pressure (max.): 10 bar, ambient temperature (max.): 46 °C, type of cooling: air, Equipment: documentation/manual, type plate available, Product description: GA75P A 10 APB 400 50 Product number: 00000402 | 8152811462 Date of manufacture: 09/30/2009 Permissible maximum operating pressure: 10 bar Volume flow: 184.1 l/s or 11.05 m³/min Product description: GA 75 Brand: Atlas Copco Cooling: Air-cooled (AIR) Electrical approval: IEC (IEC) Energy recovery: Yes (Y) Chsdpfx Aezvqp Ssknoc Frequency: 50 Hz (50HZ) Model variant: Workplace (W) Pressure Vessel Approval: CE / ASME (CEASME) Regulation: Elektronikon Graphic (MK5GRAPH) Starter type: Star/Delta (Y/D) (YD) Supply voltage: 400 V (400V) Working pressure: 10 bar (10BAR) Equipped ex works with integrated heat recovery. Current operating hours: approx. 73,000 hours The compressor is functional. It has no outstanding maintenance or repairs. The last maintenance, according to the manufacturer's specifications, was performed in 02/2026 at 70,500 operating hours. The compressor was overhauled in 2018 at 33,000 operating hours and received a new compressor element. Used machine, sold as is, without warranty.

Condition: used, Year of construction: 2019, operating hours: 27,496 h, functionality: fully functional, machine/vehicle number: 1447-6948947, power: 15 kW (20.39 HP), pressure (max.): 8 bar, Kaeser SK 25 T Rotary Screw Compressor (2019) 15kW motor power 8bar pressure Chedpfx Akjz Hdckjnsc 27,496 working hours 11,328 loaded hours

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 4-51 1992 Characteristics: Chsdpovyrnzjfx Aknoc Capacity 8.60 bar Power 250 kW Voltage 500 V Running hours at last maintenance: 57957

Condition: excellent (used), Year of construction: 2016, operating hours: 19,000 h, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 700 m³/h, operating pressure: 12 bar, pressure (min.): 4 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Fully functional Atlas Copco frequency-controlled screw compressor with built-in cooling dryer. Complete service performed, including replacement of oil, oil filter, air filter, separator filter, and thermostat. Csdpfxsz Dpt Ae Aknohc

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 250 1998 Characteristics: Capacity 7.50 bar Cedpfsvyrq Aox Aknohc Power 245 kW Voltage 500 V

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Chsdpfx Akow Rd Avsnec Technical specifications: Type: S220 Operating hours: 54,947 h Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Power: 160 kW Next maintenance: in 1,000 h.

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Inverter integrated 132 kW 8.10 bar 26.04 m3/min Chsdpfx Akezznqkjnsc Year of manufacture: 2010 Operating hours: 64,380 h

Condition: ready for operation (used), Year of construction: 1999, operating hours: 0 h, PROD. BOGE TYPE SD40 S/N 31412 YEAR 1999 POWER (kW) 30+1.10 CAPACITY (m3/min) 4.30 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 17000 / 51100 Chodpfx Akjz E Hhtonsc FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: good (used), Year of construction: 1995, Gebr. Kaeser screw compressor SK 19 Cedpfx Akezrhrvsnehc Motor power: 11 kW Year of manufacture: 1995 Permissible operating overpressure: 10 bar Air delivery rate: 1900 liters/min with Kaeser control relay Dimensions approx. L 785 x W 820 x H 1017 mm (dimensions without connections). Weight: 270 kg Location: available from warehouse 54634 Bitburg - immediately available -