Used Screwdriver for sale (128)

Condition: like new (used), Year of construction: 2019, functionality: fully functional, PRESSTA CYKLON D double-head automatic screwing machine with all accessories for sale. Package deal: if purchased together with the WM740 welding line and SMC350 machining center, which are also listed in our ads, the price is EUR 180,000. Csdpfx Aeyziu Toh Ieha

Condition: used, Year of construction: 2016, Parts of a screwdriving station. This was only used in test operations. These consisted of two screwdriving units mounted on a robot gripper. The system was used to screw battery components together. Built in 2016, the system was in storage for the past few years and then sold by Audi. The screw used is approximately 72mm long and M6. Chedpfxswh Nu Tj Ah Ioa Rexroth parts (installed twice): 0 608 720 039; i= 6.74; w=85% 0 608 820 113; Type: 3DMC060; 60Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11Nm/A 0 608 810 021 0608 810 037; Type 3ULG; i=1; efficiency 95% Weber: 1x ZEL 360 conveyor 1x control unit as shown Everything as shown, inspection requested, as it is unclear whether the system is complete.

Condition: excellent (used), Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up operations to complex sequence applications—with up to 20 phases and 250 cycles—for optimal speed, accuracy, and ease of use with every connection. The controller features various interfaces, including an Ethernet port, an RS232 port, 7 logic inputs, and 8 logic outputs (24 volts). The CVI II controller can operate an ER series handheld power tool or an EM series stationary screwdrive. It is important to note that the CVI II can also be used in combination with a sensor-controlled angle screwdriver such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" drive. Chjdpfxowxv Hkj Ah Isa Storage Capacity Between 2,500 and 8,500 tightening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening Strategies – Torque and Angle Monitoring – Angle and Torque Monitoring – Torque and Angle Monitoring – Torque and Angle Rate – Prevailing Torque – Yield Strength – Stall Torque – Torque and Angle – Plastic Zone Detection – Additional Torque and Angle Sensors – Self-Tapping – Current Monitoring Connectable Tools: Angle Screwdrivers / Stick Screwdrivers / Pistol Screwdrivers / Stationary Screw Spindles Dimensions (L x W x H): 400 x 400 × 330 mm Weight: 30 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), very good condition. video available Chedpsxyxinofx Ah Isa

Condition: new, -􀂾automatic screw feed -􀂾automatic switchoff for hopper movement via trail regulation - automatic depth disconnection Cjdey Aiaxjpfx Ah Ijha - pneumatic drive and control - pneumatic screw ejection and emergency stop - foot control - protection-frame (safety device)

Condition: excellent (used), Year of construction: 2022, joke Technology ENESKA PostPro – Post-processing station for 3D printing Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Machine type: Post-processing station for additively manufactured components For sale is a used joke ENESKA PostPro post-processing station for the professional post-processing of additively manufactured plastic components. The system was specifically designed for the depowdering, deburring, grinding, polishing, and finishing of 3D-printed components and features a closed processing chamber with integrated extraction technology, LED lighting, and convenient tool control. The scope of supply includes a comprehensive original accessory package with various electric and pneumatic processing tools, abrasives, and other accessories as shown in the pictures. Technical data: Manufacturer: joke Technology GmbH Type: ENESKA PostPro Year of manufacture: 2020 Power supply: 400 V / 50–60 Hz Connected load: 6,500 VA Fuse: 16 A slow-blow Output voltage (U20): 24 V Working chamber volume: approx. 560 l Working chamber: Large stainless steel working chamber Closed processing chamber Large viewing window LED working chamber lighting Integrated compressed air connections Connections for multiple processing tools Equipment: Codpfxjzrvd Hj Ah Ieha Touchscreen control HEPA H13 filter system Closed processing chamber Manual operations with protective gloves Perforated stainless steel work table Tool connections for electric and pneumatic tools Height-adjustable machine feet Tool package: Electric precision grinder Electric high-speed grinder Pneumatic belt grinder Compressed air blow gun with spiral hose Compressed air hoses Original joke replacement gloves Grinding belts Grinding pins Grinding discs and flap discs Plastic hammer Screwdriver Other accessories as shown in the pictures Dimensions: External dimensions: approx. 1,437 × 1,685 × 1,640 mm Weight: approx. 748 kg Transport data: Weight: approx. 748 kg Easy loading using a forklift or crane. Condition: Used Machine from industrial use. Optical condition as shown in the pictures. Scope of supply: joke ENESKA PostPro Electric and pneumatic processing tools Compressed air accessories Original replacement gloves Grinding and consumable materials Other accessories as shown in the pictures Availability: by arrangement. Scope of supply as shown in the pictures. Subject to change, errors and prior sale.

Condition: used, Vibratory hopper, dosing hopper, storage bunker, linear vibratory feeder, sorting device Vibratory bowl feeder, spiral feeder / vibratory feeder Vibratory bowl, screw feeding with vibratory feeder for screwdriving technology Feeding system, feed device Manufacturer: MÜLLENDERS Type: MLF-G2 Year of manufacture: approx. 2000 Hopper capacity: approx. 4 liters Vibration frequency: 6000 Hz Control voltage: 24 volts DC (an external power supply is required) Mains connection: 230 volts, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24 VDC power unit). - REO control unit, type Reovib RS6 439-459, for adjustable vibration speed - Stainless steel hopper, hopper open to the rear - Base frame made from aluminum profile system Required space L x W x H: 380 x 210 x 700 mm Cedpfx Ahjy E T Dto Ijha Weight: 20.5 kg Good condition

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin Cedpfeuzn Nnox Ah Ijha - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: ready for operation (used), Year of construction: 2005, table length: 3,000 mm, CNC Wood Machining Centre manufactured in 2005. This MASTERWOOD TEKNOMAT 5000 features a main milling unit and a second milling unit, both with a tilting range of 0–90°. It includes a drilling head, an Anuba hinge insertion unit for various hinges, and a screwdriver unit. The machine also has sliding supports with suction cups and a vacuum pump. If you are looking to get high-quality woodworking capabilities, consider the MASTERWOOD TEKNOMAT 5000 machine we have for sale. Contact us for further details. • Main Milling Unit Tilting Range: 0–90° Csdpfx Ahjzrf Rcj Isha • Second Milling Unit Tilting Range: 0–90° • Drilling Head: Included • Anuba Hinge Insertion Unit: For single-stem and double-stem hinges • Screwdriver Unit: Included • Workpiece Supports: Sliding supports with suction cups • Vacuum Pump: Included • Clamping System: Mechanical and vacuum clamping

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s Cedpfx Ahozhub Ao Isha X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Year of construction: 2021, condition: used, EV Car Rotor Assembly Line (2021) Designed to produce rotors in the height range 300–460 mm Including manual, semi‑automated, and automated operations Cycle time: 86 s Manufacturer: TeamTechnic (Nextomation) Stations and Equipment Rotor package and shaft loading, shrinking, and cooling KUKA KR120 R3900‑2K/FLR robot (2021) with camera system 3x semi‑automated material infeed for rotors (high and low versions) 3x semi‑automated material infeed for metal sheet packages Automated sheet‑metal package heating and shaft insertion Rotary table with 6 heating stations, up to 300 °C Rotor pressing, locking, and laser marking Automated pressing with 10 T Kistler press and package locking using a Bosch 4GE 59 screwdriver (90 Nm) Laser marking with Arex 420 laser Resin application and large magnet assembly Manual magnet belt feeding on trays Automated large magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin application and small magnet assembly Manual magnet belt feeding on trays Automated small magnet insertion and sealing Scheugenpflug LiquiPrep LP 804 resin dispensing unit Resin gelling and curing Automated operation for 150 pcs at 200 °C Chjdpfx Ahozc N H Ds Ioa WPC tooling preparation station Press plate cleaning station Package unlocking, resin level, and magnet position control Automated assembly tool removal with a Bosch 5DMC530 screwdriver (90 Nm) Resin level and magnet position control Balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses Spinning Automated aging and working‑condition simulation up to 120 °C KUKA KR120 R3100‑2/FLR robot (2021) 3x Hoffmann ESV25‑AR2 spinning stations (2022) 4x cooling tracks Final balancing Automated balancing with pin insertion and verification KUKA KR120 R3100‑2/FLR robot (2021) 2x Schenk eTeno balancing machines (2021) 2x 1.5 T Kistler presses

Year of construction: 2017, condition: as good as new (ex-display), machine/vehicle number: 6151550180, Demonstration tool: hydraulic high torque wrench LP2 from TITAN without link Torque range: 363 to 2476 Nm Downforce: suitable for screwdrivers (wrench size SW 19 to SW 60) Links are optional and not included Weight: depending on the cassette from 2.56 to 3.16 kg Total length with cassette: 226.1 mm Total height: 31.8 mm Advantages: -Patent Multi Axen connection: Freely movable hose, multi-positioning of the hose -Flat design: Fits easily on all tight spots - Unique broad-gauge teeth -Modular concept Characteristics: -Certified accuracy +/- 3% -The Titan WIDE Track ratchet-tooth design distributes the force evenly, it provides a larger contact surface and thus brings the power to solve the-bolt case perfectly - every time - Handcrafted from the highest quality aviation materials for ultimate strength and durability (AQ Grade 7075-T6 Alloy) - Low profile and flat design for extremely tight spaces Chodpjdv Scfofx Ah Iea

Year of construction: 2010, operating hours: 75 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 08/2010 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Cjdovxux Hjpfx Ah Isha Ethernet interface

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface Chedpfx Aevtf Areh Ija

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Codpfx Ahjdcmdls Ioha Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: new, Ruchsr Assembly line consisting of: Item 1.0 / RU-CBM 4000 work table with running rail extended by 500mm for additional assembly an aluminum holder screwing machine for RU-CSA-SMB or RU-CSA-SMZD with RU-SH special screwdriver, support table Length 4000 mm, width 1400 mm, inclination of the working platform manually adjustable. Holder for fitting scissors or fitting punch. 16 pieces of swiveling counter-holders for hanging the wings, completely pneumatic Foldable for unhindered movement of the wings on the table surface. Device for scanning the sash fitting length for constant and variable/central gear seat for already drilled wings, colored Dimension recognition of the fittings. RU-SH, special screwdriver with pneumatic depth switch on carriage mounted, safety control, pneumatic height adjustment, Screw feeder with automatic shutdown of the filling container (Manual insertion for a second screw length on the special screwdriver upon request). RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4, turret stop for 4 different wing widths Swivel table mounted. Pneumatic wing measurement sensing. operated, scanning range up to 2500mm simultaneous clamping of the scanning. PSF - Pneumatic tensioning device for sashes. Working height adjustable from 900 - 1000 mm. Support table covered with felt. Running rail extended to the left by 800 mm. Item 1.1 / 5035-1 Pneumatic swivel device of the work surface with foot valve Item 1.2 / 0500000 Holder matched to customer punch/scissors. For mounting a hardware punch provided by the customer or Fitting shears (third-party manufacturer) on the sash assembly table. Please specify make when ordering!!! Item 1.3 / 5597-7 Driving device for RU-CBM on semicircular rails. The castors are on the left and right of the base frame of the table mounted. Item 1.4 / 6354-6 3 double meters of semicircular rails 30 x 10 mm. Item 1.5 / 0730000 RU-SBL3000/40 free-standing fitting bearing, Length 3100 mm, depth 1250 mm, height 2200 mm, Csdpsd Ih Huefx Ah Ijha Stand frame on the front without supports, 40 compartments, divided into 10 compartments in a row by dividers and a continuous shelf at the top, Compartment size: width 280 mm, height 150 mm. Item 2 RU-CSA-SMB aluminum holder screwing machine with automatic Screw feeding and manual feeding of the aluminum holders from one traveling box with pneumatic positioning device, Screwdriver with depth cut-off with 4-fold turret stop. Pneumatic adjustment device in the y direction against 2 pieces 6-fold Revolver attacks. Feed container for manual feeding of rotary holders or clip holder in square shape 18.5 x 18.5. The holder is manually pushed into a channel in the box and with positioned in front of the screwdriver mouthpiece using a pneumatically operated slide. Profile depth max. 150 mm, screw spacing in the y direction max. 120 mm. Item 3 RU-S48-A6-350 column slewing crane for chain hoist, with 6 m aluminum boom Version with column, smooth-running boom and sliding chassis for swivel and trolley travel manually by pulling and pushing the load. Projection 6 m Construction height 4,461 m Lower edge of boom 3.722 m (top edge of boom 3.9 m) Swivel range max. 270° Painting of the steel construction in RAL 7035 The base plate is attached to the on-site hall floor At least 250 mm thick. Designed, of course, according to the valid STANDARD EN 13155...

Condition: new, 0 ja Working width 3000 (3500) mm 0 ja Ruchser RU-BM-3000 (option: 3500) Wing assembly table ----- Herstellerbeschreibung: Item 1.0 Article 0610000 RU-BM-3000 Sash assembly table, for sashes up to max. 2500 mm height with RU-SH, special screwdriver length 3000 mm, width 1400 mm, inclination of working platform manually adjustable. Usable width 2500 mm Holder for hardware shears or hardware punch. 10 swivel-mounted pendants for hanging the sashes, completely pneumatically foldable for unhindered movement of the sashes on the table surface. Device for scanning the sash fitting length for constant and variable/centered handle fit and any handle fit height for pre-drilled sashes, colour-coded dimension recognition for the fittings. Pendulum height can be set to 50 or 60 mm on one stop. RU-SH, special screwdriver with pneumatic depth cut-off mounted on carriage, safety control, pneumatic height adjustment, screw feeder with automatic switch-off of the filling container manual insertion for a second screw length on the special screwdriver, accessories. RA-8, turret stop for 8 screw levels mounted on the carriage. RA-4 commuter rail manually adjustable in depth against left and right one 4-fold turret stop each. PSF - Pneumatic clamping device for sashes against the lateral stops. Working height adjustable from 900 - 1000 mm. Please specify whether felt, sliding or brush strips should be used as a support. Item 1.1 Article 6315 RU-BM-... adjusted to customer's fitting specification Item 1.2 Article 0500000 Holder adjusted to customer punching press/ shear For mounting a customer-supplied punching press or shear (other manufacturer) on the sash assembly table. Please specify make when ordering !!! ----- Price RU-BM-3000 in the above version ex works: on request! ----- Fitting bearing options for RU-BM-3000: ----- Version with fixed fitting bearing: Price EUR 5.468,00 Article 0630000 RU-BL-30/30 Fixed fitting storage unit Mounted above the leaf assembly table Length 3100 mm, depth 1250 mm, with 3 shelves with 10 compartments each, divided by partitions. Freestanding version: Price EUR 6.017,00 Item 0710000 RU-SBL3000/30 Freestanding storage unit, Length 3100 mm, depth 1250 mm, height 2050 mm, upright frame on the front without supports, 30 compartments, 10 in a row, each divided by partitions and a continuous shelf at the top, size of the compartments: width 280 mm, height 150 mm 4 pcs. Angle supports for corner deflections: Price 609,00 EUR Side length 120x120mm; inclination approx. 3° The front edge of the angles is bent up 5mm to prevent accidental unloading. 2 pieces on the left and 2 pieces on the right under the first shelf of the fitting. ----- Surcharge for RU-BM-3500 ----- Article 0610300 RU-BM-3500 Sash assembly table for sashes up to max. 3000 mm height with RU-SH, special screwdriver length 3500 mm, width 1400 mm, inclination of working platform manually ble width approx. 3000 mm Surcharge RU-BM 3500 to RU-BM 3000: EUR 2,811.00 Fitting bearing for RU-BM-3500 (only free-standing possible): Price EUR 6,665.00 Chodpfx Ahjt Tq Aas Iea Item 0710007 RU-SBL3800/36, free-standing fitting storage Length 3800 mm, depth 1280 mm, height 2060 mm...

Condition: used, maximum load weight: 2,123 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 08/2022, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 350 mm, total width: 1,647 mm, total height: 748 mm, Year of construction: 2022, A37 GW26N0159988, Rear tipper by Unsinn, type UHK 2627-14-1500, tandem axle, gross vehicle weight 2,600 kg, platform trailer, overrun brake, 100 km/h, aluminium side panels, pumpless cordless screwdriver pump. Subject to errors and prior sale. Chjdsyn Uc Uepfx Ah Isa

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronics screwdriver, hand drill -Nominal input: 740 watts -Max. drill bit: Ø 13 mm Cjdpfx Ahsfc Hfys Ieha -Connection: 220 volts Quantity: 1 available -Dimensions: 450/210/H80 mm -Weight: 4.3 kg/piece

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Chjdpeym Ih Usfx Ah Isa

Condition: new, empty load weight: 390 kg, maximum load weight: 910 kg, overall weight: 1,300 kg, loading space length: 2,300 mm, loading space width: 1,500 mm, loading space height: 300 mm, Product information "UNSINN WEB-HK2315-13-10 1300kg 230x150x30cm rear tipper with PUMPless" Rear tipper from trailer manufacturer Unsinn. Made in Germany! The WEBHK2315-13-10 single-axle high-loader is a rear tipper. Easy to load thanks to its foldable and removable aluminum side walls. The load can then be tipped manually using the hydraulic system. A welded base frame makes the tipping trailer very stable. Chsdpfx Aoq Rvcqeh Isa This car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, a support wheel, lashing eyes, a welded, hot-dip galvanized steel frame, and a sturdy V-drawbar. Accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, load securing net and supports are also available for an additional charge.

Condition: new, Machine according to DIN 8605: Lathe with increased accuracy. Distance between centers: 700 mm Distance between centers: 170 mm Swinging diameter over bed: Ø 340 mm Swinging diameter over carriage: Ø 190 mm Bed width: 260 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Carriage length: 410 mm Carriage width: 150 mm Guide length of bed carriage: 380 mm Lathe tool shank cross-section: 20x20 mm Distance from lathe center to top slide: 34 mm Swiveling range of top slide (rest): 60/120° Main spindle: Spindle mount DIN 55029 (camlock): S 5 Spindle bore: Ø 50 mm Internal taper according to DIN 7178: 1:22 Spindle diameter in the front bearing: Ø 70 mm Max. chuck diameter: Ø 200 mm Max. faceplate diameter: Ø 200 mm Spindle speeds: 40-3000 RPM Speed control: Stepless Mechanical speed steps: 4 Main drive: Power at 40% duty cycle: 5.3 kW Max. rated torque at main spindle: 640 Nm Feed: 20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev 20 (28) cross feeds X: 0.023-0.406 mm/rev Threads: 20 (28) metric threads (standard equipment): 0.4 - 7.0 mm 32 inch threads (with optional gear set D3Z200): 56 - 4 TPI 28 module threads (with optional gear set D3Z200): 0.2 - 3.5 32 diametral pitch threads (with optional gear set D3Z200): 112 - 8 Tailstock: Arbor diameter: Ø 50 mm Internal taper of arbor: MK 3 Arbor travel: 120 mm Lateral adjustment: ± 13 mm Permissible workpiece weights Suspended: 50 kg Supported by tailstock: 150 kg Further standard equipment (standard accessories): Includes machine stand and integrated 3-axis digital display, German language, with color display 1 length stop 1 center, taper 1:22, DIN 7178 1 center MK3 1 chuck key 1 key part 1 grease gun 3 hexagon head screws M16x60 - DIN 933 3 hexagon nuts M16-8 DIN 934 1 simple tool holder 1 key A13x17 DIN 837 1 open-end wrench SW 19 1 open-end wrench SW 22 1 hexagon screwdriver SW 5 1 hexagon screwdriver SW 6 1 hexagon screwdriver SW 8 3 shear pins 1 box wrench 1 operating manual incl. parts list 1 electrical documentation 1 test report Packaging (for truck transport with pallet and plastic cover) Machine according to CE Note: Illustrations show special equipment / accessories, among other things! Codpfx Ahjdctnbe Ioha

Condition: used, Available quantity: 3 units Chedezgf D Eopfx Ah Ioa Manufacturer: Cleco Model: 48ESE25D3 Product type: Electric torque screwdriver Condition: used Design: Inline screwdriver Application area: Industrial series assembly Drive: electric Use: Controlled screw fastening Suitable for: Production and assembly lines Industrial design: yes

Condition: ready for operation (used), Stöger 9278 screwdriving automation SN: SES003743 with 2 x Kistler Z90002.15 sensors SN: 5078913 + 5078912, used, in good condition, 100% fully functional, scope of delivery as per photos. Codpfx Ahox Eu Sxe Isha

Condition: ready for operation (used), Stöger 9280 Screwdriving Automation SN: SES003744, used, in good condition, 100% operational, scope of delivery as per photos. Codox Eu S Ejpfx Ah Ieha