Used Sem London for sale (16,437)

Condition: new, empty load weight: 770 kg, maximum load weight: 2,230 kg, overall weight: 3,000 kg, loading space length: 3,050 mm, loading space width: 1,780 mm, loading space height: 850 mm, tire size: 185/60R12, Felge schwarz, Three-way tipper with attachment from the manufacturer ANSSEMS model KSX3000 305x178E Go-Getter. Ltodpfxeq Rfn So Agzja The standard equipment of the Anssems tipper includes a steel floor, swinging and removable corrugated grid attachment, lashing eyes on the outside of the frame and inside, black rims, black aluminum side walls, all folding and removable, LED lighting, storage box, electric hydraulics with battery and cable remote control, drive-on rail shaft (rails at extra charge), sturdy welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems tipper trailers with grid attachment such as flat tarpaulin, ramps, support set, lashing straps, net hooks, trailer net and anti-theft device.

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm Ljdpexiy Htofx Agzeta - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Condition: good (used), Year of construction: 2000, Special-purpose machine, not a through-feed machine but a support machine, approximately 150 cm long where the workpiece is clamped. 4 units positioned transversely to the feed direction. It was used for intermediate sanding of polyester lacquer to achieve high-gloss finishes on dashboard panels for luxury cars. The total machine length is 12 m. Ledpfx Asxivbmjgzeta

Condition: used, Year of construction: 2008, Technical details: Ltedpfx Agslqac Sezea max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders Ltsdpfod Nn Idex Agzsa -Sempress type: ADO-MAEFlange: Ø 40 mm -Thread: M16 x 1.5 -Stroke: 980 mm -Dimensions: 1180/65/65 mm -Weight: 8.1 kg

Condition: good (used), Year of construction: 2002, 040 USED Semi-Stal tunnel basket washer. Ltsdpfxevy Uxij Agzea EXTERNAL DIMENSIONS (in cm.): - H: 230, - W: 250, - L: 1150. WASHING BASKET DIMENSIONS (in cm.): - W: 40, - H: 20-25. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: new, empty load weight: 770 kg, maximum load weight: 2,230 kg, overall weight: 3,000 kg, loading space length: 3,050 mm, loading space width: 1,780 mm, loading space height: 300 mm, tire size: 185/60R12, Felge schwarz, Three-way tipper from the manufacturer ANSSEMS model KSX3000 305x178E Go-Getter. Ledpfx Aeq Rfnkegzjta The standard equipment of the Anssems tipper includes a steel floor, lashing eyes on the outside of the frame and inside, black rims, black aluminum drop sides all foldable and removable, LED lighting, storage box, electric hydraulics with battery and cable remote control, drive-on rail shaft (rails at an extra charge), sturdy welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems tipping trailers such as high tarpaulin, side wall attachment, grid attachment, wheel stopper, support set, lashing straps, nets and anti-theft devices.

Condition: used, Year of construction: 2018, Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)     Ltedpfjl Hx Dmox Agzea

Year of construction: 2019, condition: excellent (used), SEMA-Maschinenbau Type MT-40-C Technology Drilling Year of manufacture: 2019 Control Unit Technical Specifications Control System - CNC control: SIEMENS 840 D SL Dimensions & Weight - Space required (left/right): 13,480 mm - Space required (front/rear): 10,502 mm - Total height: 4,532 mm - Total weight: approx. 23,000 kg Electrical connection data - Power consumption (total): 210 kW - Connection voltage: 400 V - Mains frequency: 50 Hz Basic machine with 11 stations 1. Station 1: Component loading with multi-axis handling. Ltodpfx Aswf R N Hjgzsa 2. Station 2: Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling (IKZ), max. speed 15,000 rpm. 3. Station 3: Crown turret *Sauter 112* (3 spindle units, HSK 40) with external cooling. - Additionally: 1 × 2-axis unit *SEMA AE2-35/50/NC*. 4. Station 4: 1 × SE-HSK 50C spindle unit with internal cooling, max. speed 15,000 rpm. 5. Station 5: 1 × Crown turret *Sauter 112* (3 spindle units, HSK 40) with internal cooling. 6. Station 6: 1 × Sauter 112 crown turret (3 spindle units, HSK 40) with internal coolant. - Additionally: 1 × SEMA AE1-35/50/NC 2-axis unit. 7. Station 7: Hydraulic docking unit including C-axis positioning unit. - Equipment: 7 × SEMA AE1-35/50/NC 2-axis units. 8. Station 8: Hydraulic docking unit including C-axis positioning. - Additionally: 1 × permanently integrated angle head. 9. Station 9: 1 × SEMA AE3-35/50/NC 2-axis unit. 10. Station 10: Permanently integrated angle head *Benz S-35/50/NC*. 11. Station 11: Cleaning unit for blowing off (inside/outside). --- Notes on structuring: - The information is grouped thematically (control, dimensions, electrical system, stations). - Technical details such as spindle types, cooling, and speeds have been listed precisely. - Models and manufacturers (Sauter, SEMA, Benz) are highlighted. - Stations 7 and 8 have been more clearly separated to avoid confusion. - Consistent formatting for better readability. Do you need further adjustments? 😊 Siemens Sinumerik NCU 730.3BPN 840DSI Electrical capacity 210 KW Availability date 05/2025 Weight 23 t

Condition: used, Year of construction: 2005, 1 used crankshaft milling device in very good condition for mounting e.g. on a lathe for milling crankshafts or other milling work Make: SEMA, Origin Austria Model: SE 100 Year of manufacture: 2005 Technical data: Spindle holder ISO 50, concentricity / test mandrel L=300 mm = 0.01 mm Speed range, infinitely variable, currently set to 2,000 rpm Spindle is designed for up to 3,000 rpm Drive power currently 15 kW Lododdziyepfx Agzsta The milling spindle is designed for up to 25 kW Bearing diameter 110 mm The 2 screwed-on adapter plates under the milling spindle are each screwed on. These plates can be used for your lathe, reworked or may have to be newly manufactured. Screw-on surface of the milling spindle: L x W: 490 x 250 mm Accessories / special features: Milling spindle: - The milling spindle is mounted on the face support of your lathe - Infinitely variable speed adjustment, LENZE frequency converter, designed for up to 30 KW - Clockwise / counter-clockwise rotation - Lifetime lubricated spindle bearings - Sturdy construction with hardened and ground spindle - High precision - Spindle with 2 bearings and 5 spindle bearings - Tool tightening via a threaded spindle - Mobile carriage with control panel - Emergency stop - Lockable main switch Drive gear for the main spindle: - A long drive rod is mounted in the spindle bore and connected to the gearbox - Infinitely variable speed adjustment, LENZE frequency converter - Clockwise / counterclockwise rotation - Jog mode Fast / slow The pictures show this unit mounted on a SARO SPA 10 x 3000 universal lathe for milling crankshafts. This lathe is not included in the scope of delivery! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, CNC control, power supply, power supply, switching power supply, power supply, servo module, control unit, Promodul -Manufacturer: Schleicher, Promodul control unit from Ilsemann KCD 1 packaging machine Ltedpfx Agjrfztwszja -Type: KEG 24-30 -Dimension: 600/145/H180 mm -Weight: 7.7 kg

Condition: used, Wide belt sander Manufacturer: Heesemann Model: KSM1 Sanding width: 1,300 mm Workpiece thickness: 3-140 mm Feed speed: 4.5-22 m/min Sanding belt dimensions: 2,620 x 1,350 mm Brushing device Lsdewv Ta Nepfx Agzsta Brush roller diameter: 150 mm Drive power: 1.5 kW Space requirement (L x W): 1,850 x 2,470 mm

Condition: new, empty load weight: 410 kg, maximum load weight: 2,090 kg, overall weight: 2,500 kg, loading space length: 3,010 mm, loading space width: 1,500 mm, loading space height: 350 mm, tire size: 185/70R13, Sturdy braked low-loader with tandem axle from the manufacturer ANSSEMS model BSX2500 301x150. As standard equipment, the Anssems box trailer with brake has aluminum side walls, internal locks, external lashing eyes, profile channels for mounting accessories or load securing, very stable welded steel frame, railing on the side, front high frame, front flap, pull-out supports for tailgate, support wheel and a V-drawbar. Lodpfxorz Rydj Agzjta We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, tool box, lashing eyes, straps and lock.

Condition: used, Year of construction: 2006, SEMA SE 100 milling spindle unit, e.g. for the production of crankshafts Spindle holder flange Speed with this gearbox 97 rpm Spindle is designed for up to 3000 rpm Drive power, currently 22 kW The milling spindle is designed for up to 25 kW Bearing diameter 110 mm Disc milling cutter SANDVIK Ø 700 x 25 mm Immersion depth of the disc cutter 235 mm Accessories / Special features: - Side milling cutter SANDVIK Ø 700 x 25 mm - Lubricated-for-life spindle bearings Ljdsddzi Aopfx Agzsta - Sturdy construction with hardened and ground spindle - High precision - Spindle with 2 bearings and 5 spindle bearings - Tool tightening via flange New price at the time: approx. 34,500.00 € net Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Simatic Panel, Operator Panel, Machine Control, Interface Panel, Control Unit, Operating Panel, Control Panel -Manufacturer: Ilsemann, Control Panel -Type: 216 -Interface: V24/RS232 -Dimensions: 205/130/H60 mm Ljdpfx Agsud Uuaezeta -Weight: 0.9 kg

Condition: new, empty load weight: 300 kg, maximum load weight: 1,700 kg, overall weight: 2,000 kg, loading space length: 3,010 mm, loading space width: 1,510 mm, loading space height: 300 mm, tire size: 155/80R13, Braked low-loader tandem from the manufacturer ANSSEMS model GTT2000 301x151. Ledjrx Spxspfx Agzsta The Anssems box trailer with brake has aluminum drop sides, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar as standard equipment. We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, corrugated grid attachment, side wall attachment, rear support set, tool box, lashing straps and anti-theft device at a reasonable price.

Condition: used, Electric motor, three-phase motor -Power: 1.2 kW -Speed: 1400 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 335/127/H186 mm Ltodpfx Agsd Eqllozsa -Weight: 13.5 kg

Condition: new, empty load weight: 520 kg, maximum load weight: 2,180 kg, overall weight: 2,700 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 185/60R12, Car transporter from the manufacturer ANSSEMS model MSX2700 405x200 BASIC. As standard equipment, the Anssems car trailer has a wooden floor, lashing eyes on the outside of the frame, aluminum drive-on rails that can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems car transport trailers such as a high tarpaulin, side wall attachment, wheel stopper, rear support set, tool box, car lashing straps and anti-theft device. Ltodsrxu Uwepfx Agzoa

Condition: new, empty load weight: 540 kg, maximum load weight: 2,460 kg, overall weight: 3,000 kg, loading space length: 4,050 mm, loading space width: 2,000 mm, tire size: 195/55R10C, Alufelgen, Felge schwarz, Car transporter from the manufacturer ANSSEMS model MSX3000 405x200 Go-Getter. Ltodpfx Agjq Rfl Tozja As standard equipment, the Anssems car trailer has an aluminum floor, side edge profile in black, aluminum rims in black, LED lighting, storage box, lashing eyes on the outside of the frame, aluminum drive-on rails can be inserted under the loading area, low chassis, stable welded steel frame, support wheel and a V-drawbar. We also offer accessories for Anssems car transport trailers such as high tarpaulin, side wall attachment, wheel stopper, rear support set, car lashing straps and anti-theft device.

Condition: new, empty load weight: 550 kg, maximum load weight: 2,450 kg, overall weight: 3,000 kg, loading space length: 5,070 mm, loading space width: 2,000 mm, loading space height: 180 mm, tire size: 185/60R12, Car transporter with tarpaulin body from the manufacturer ANSSEMS model AMT3000.507x200. As standard equipment, the Anssems car trailer has an aluminum floor, lashing eyes on the outside of the frame and on the top of the side panel, aluminum drive-on rails can be inserted under the loading area, low chassis, removable front and rear drop sides, tarpaulin & frame with wind slope, light track, tarpaulin roller blind and sliding tarpaulin on the left, winch can be adjusted and pulled out on the left and right, rear support set, support wheel and a V-drawbar. Ltodpjuh R S Ajfx Agzja We also offer accessories for Anssems car transport trailers such as side wall attachment, wheel stopper, tool box, car lashing straps and anti-theft device.

Condition: new, empty load weight: 500 kg, maximum load weight: 2,000 kg, overall weight: 2,500 kg, loading space length: 4,400 mm, loading space width: 1,900 mm, loading space height: 180 mm, tire size: 185/70r13, Car transporter from the manufacturer ANSSEMS, model AMT2500.440x190. As standard equipment, the Anssems car trailer has an aluminum floor, lashing eyes on the outside of the frame and on the top of the side panel, aluminum drive-on rails that can be inserted under the loading area, low chassis, removable front and rear drop sides that can be used as wheel stops, adjustable and extendable winch on the left and right, rear support set, support wheel and a V-drawbar. We also offer accessories for Anssems car transport trailers such as a high tarpaulin, wheel stopper, tool box, car lashing straps and anti-theft device. --- You can also find all our low-cost offers on our homepage Ltjdpfof Dtx Sjx Agzsa Germany-wide delivery (except islands) possible! for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: new, empty load weight: 550 kg, maximum load weight: 2,050 kg, overall weight: 2,600 kg, loading space length: 2,940 mm, loading space width: 1,500 mm, loading space height: 270 mm, tire size: 185/60r12, *Excavator transporter* from *manufacturer* HULCO model TERRAX-2 2600.294x150-BASIC. Ledpfx Agjqwddhozota As standard equipment, the Hulco-*Anssems* *machine transporter* has a wooden floor, lashing eyes, ramp flap with spring support and support, shovel tray, sturdy welded steel frame, support wheel and a V-drawbar. We also offer accessories for *Anssems tipper trailers* such as attachment walls, grid attachment, tool box, lashing straps, nets and trailer lock.

Condition: new, empty load weight: 150 kg, maximum load weight: 350 kg, overall weight: 500 kg, loading space length: 1,810 mm, loading space width: 1,010 mm, loading space height: 480 mm, tire size: 145/80R13, Unbraked low loader with cover from trailer manufacturer ANSSEMS model GT500 181x101 HT. The standard equipment of the Anssems cover trailer without brakes includes aluminum drop sides, aluminum cover with railing, internal locks, external lashing eyes, profile channels for attaching accessories or load securing, support wheel and a tubular drawbar. Ltodoq Svi Uopfx Agzja We also offer inexpensive accessories for Anssems car trailers such as net hooks, rear supports, tool box, lashing straps, lashing eyes and anti-theft devices.

Condition: new, empty load weight: 580 kg, maximum load weight: 1,920 kg, overall weight: 2,500 kg, axle configuration: 1 axle, loading space length: 3,001 mm, loading space width: 151 mm, loading space height: 153 mm, loading space volume: 7 m³, suspension: other, tire size: 185/70r13, Cover trailer braked low loader tandem from the manufacturer ANSSEMS model GTT2500 301x151 VT3. As standard equipment, the Anssems box trailer with brake has a lockable lid with railing, aluminum side walls, drive-on flap, internal locks, adjustable lashing eyes, profile channels for mounting accessories or load securing, jockey wheel and a V-drawbar. Financing: possible WITHOUT down payment!!! You can find other sizes, equipment and other affordable models in our store: ----- You can also find all our low-cost offers on our homepage Lsdpfx Agsf Nt D Rozeta Germany-wide delivery (except islands) possible! for the prices. ----- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: new, empty load weight: 240 kg, maximum load weight: 510 kg, overall weight: 750 kg, loading space length: 2,110 mm, loading space width: 1,260 mm, loading space height: 830 mm, tire size: 145/80R13, Low loader with cover from the manufacturer ANSSEMS model GTB750 211x126 VT1. Ltodpfxsq Su Tue Agzea As standard equipment, the Anssems lid trailer with brake has aluminum side walls, aluminum lid with gallery, internal locks, adjustable lashing eyes, profile channels for attaching accessories or load securing, support wheel and a V-drawbar. We also offer accessories for Anssems car trailers such as tool box, lashing straps, lashing eyes, 100 km/h, and lock.