Used Semi Automatic Bandsaw for sale (28,787)

Condition: good (used), Semi-automatic spiral binding machine Renz Autobind 700 III Machine in very good condition, ready to work. Efficient semi-automatic for the production of calendars, notebooks and other products bound in metal spirals. Fast operation Csdpfjwt Sumjx Afnjpu Supports spiral diameters in the range of 3/16”-1 1/8” Working width up to 700 mm Crimping thickness approx. 23 mm Efficiency up to 1200 cycles/h The semi-automatic unwinds the spiral from the spool, counts the stitches, cuts the spiral to the specified number of stitches and transfers the spiral section to the crimping zone. The operator places a calendar with previously made perforation on the table The calendar is automatically transferred to the crimping zone after pressing the pedal. Power supply 230V + compressed air Weight 615 kg + cabinet with tools 300 kg.

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Cpodpfsv Iccfox Afneu Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor Cpedpfx Ajmb U Tujfnsu • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2026, Skyrocket your steel cutting productivity and eliminate strenuous labour associated with steel cutting with a semi-automatic saw based on precision servo-motor actuation. Automatic detection of the material placed to cut with the machine setting itself to the shortest cutting stroke needed without you needing to adjust any limit sensors. Automatic detection of saw motor overload and reverse to alleviate. Cpodpfxjmcbk Rs Afnsu Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø400 mm HSS blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Semi-automatic cutting with adjustable saw feed rate and blade RPM (20-100) • Spindle and drive unit immersed in oil solution for smooth performance and long service life • Mitering locking device stops at 45° left straight 90° and 45° right • Industrial ball-screw actuator with servo motor control of the saw stroke • Auto-detect of the material size results in short stroke & cut times without user input • Saw overload detection with feed modulation • Fully integrated flood coolant system • Every new unit comes with brand new HSS blade for ferrous cutting • Optional AS / NZS 4024:2014 safety guard with tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on press of a button • Safety switch disabling the saw operation when guard it up Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° Codomb U Tfjpfx Afnjpu • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Csdomb U Tbspfx Afnopu Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Condition: new, Year of construction: 2026, Do you cut hardened or stainless steels on a cheap abrasive saw? Upgrade your production to a high-safety, PLC controlled, industrial hot saw. S200 is a semi-automatic abrasive (hot) cutting system designed for cutting stainless and hardened steels, as well as matrix-type materials like rubbers, threads, carbon fibre, which require high RPM cutting. Suitable for single or (bundled) multiple tubes cutting at once. Full pneumatic liftable guard (including tunnels 900 mm either side) preventing saw access and safely capturing all sparks from the cutting process. Opening and closing of the guard with a press of a button for a full unimpeded saw table access with safety switch disabling the saw on lifting of the guard. Saw cooling by forced air circulation and convection design. Optional vacuum extraction system for dust collection. • Ø200 mm abrasive cutting disc with 1.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • Precision machined and balanced high-RPM spindle and drive unit • Precision 90° cuts with smooth performance and long service life. • 2x vertical clamps with adjustable clamp pressure • Adjustable feed control of up / down cutting cycle. • Rapid blade changeover system minimising time. • Air gun and LED interior light • 1× Ø100 mm attachment points for dust collection • Optional 2.2 kW vacuum extractor Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture Csdpfxemcbk Uo Afnjpu • Carbon fibre manufacture • Fiberglass manufacture

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum dust extractor Cpedpomb U T Hjfx Afnou Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Cjdpfx Afemcaahenjpu Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button Cpedpfjmb U T Rox Afnou • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up Cedpfxsmb U T Uo Afnspu • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture Cpjdomcaawopfx Afnou • Pallets manufacture • Furniture manufacture • Bulk timber cutting

Condition: used, Die halbautomatische Verschlussmaschine RLC1 ist für die Verpackung von Glasflaschen mit 26 oder 29mm Kronkorken geeignet. Die Schließeinheit kann auf Kronkorken von 26 oder 29mm Durchmesser verwendet werden. Wenn man beide Durchmesser braucht, wird eine zusätzliche Schließeinheit geliefert. Der Schließkopf der Kronkorken ist aus gehärtetem Stahl, und auch im Laufe der Zeit ist er verschleißfest. Die Schiene führt die Kronkorken in der richtign Position. Die spezifische Form der Schiene wird spezifisch für die Kronkorken aus Edelstahl 304 gebaut. Diese enthält eine kleine Menge Kronkorken, die manuell eingegeben werden können. Die Schließeinheit zieht die Kronkorken aus der Schiene heraus und steckt sie in den Schließkegel. Den EG-Normen entsprechend startet der Verschlussprozess mit dem gleichzeitigen Drücken von zwei Tasten. Nach der Positionierung der Flasche auf den Halter, fängt der Verschlussprozess an, die Schließeinheit sinkt auf die Flasche und verschliesst der Kronkorken, automatisch kehrt die Schließeinheit zurück. Cjdex Iv Tispfx Afnopu Maße: L 0,41m H 1,96 m B 0,41 m Gewicht ca. 80kg Gewicht mit dem automatischen Trichter:140kg, Max Durchmesser der Flasche 220 ​​mm nutzbare Höhe max 500 mm

Year of construction: 2025, condition: new, Equipment: CE marking, The granules filling packaging machine can filling the granules materials, such as beans, rice, sugar,almonds and other granular materials Filling capacity: 5-5000g Filling speed: 400-600 bags/hour(Base on 1kg) Material: Food grade 304SS Power: 1.5KW Voltage: 220V 50HZ Single phase Cedpfx Afjxyiz Isnspu

Condition: good (used), functionality: fully functional, saw band length: 4,100 mm, saw band width: 27 mm, total height: 1,700 mm, total length: 2,400 mm, total width: 2,300 mm, cutting speed: 75 mm/min, cutting length (max.): 400 mm, empty load weight: 1,500 kg, TECHNICAL DATA & EQUIPMENT: Saw band drive: 2.2 kW Hydraulic unit: 0.37 kW Coolant pump: 0.12 kW Total power requirement: at least 2.7 kW Cutting speed: up to 75 m/min Saw feed: hydraulic Lowering speed: 0-250 mm/min Saw band dimensions: 4100 x 27 x 0.9 mm Max. material weight: 250 kg Cutting length: approx. 400 mm REFERENCE NUMBER 17 DIMENSIONS & WEIGHT: 2400 x 2300 x 1700 mm Csdpfx Afsw U Tt Esnepu 1500 kg NOTES ON COLLECTION: The item will be available from September 2025. A specific pick-up date must be agreed on a day after 01.09.2025. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: used, Year of construction: 2025, New display machine! Partnership Edition, incl.: - 1 meter roller conveyor to the right of the saw with galvanized rollers. - 1 meter roller conveyor to the left of the saw with galvanized rollers. - 1 piece pneumatically retractable stop with 200 mm length and operating switch mounted on the saw frame. SAFE – SOLID – FAST This compact, simple, robust, and innovative machine guarantees maximum safety, flexibility, and reliability. Standard equipment: - Automatic safety and pressure device - Ergonomically positioned two-hand control - Fixed safety shield Load capacity: 230 kg, roller diameter: 60 mm, spacing: 250 mm, width: 350 mm. Including 100 mm high rear stop rule with scale. - 1 HM saw blade, 500 mm, Z = 108 Technical data: Maximum cutting range: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction port: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3~ Working height: 900 mm +/- 20 mm Cpjdpfsw Tfzlsx Afnsu Minimum distance between stop and saw blade: 70 mm Minimum distance between two stops: 60 mm Location:

Condition: new, Saw frame: Schwenkrahmenmeasurements of saw band: 2730 x 27 x 0x9speed of the tape: 35/70cutting area - round: 230cutting area - square: 230cutting area rectangle: 320 x 130messurements (LxWxH): 1350 x 770 x 1300working height: 760coolant pumpmotor: 0.12weight approx.: 525cutting area 45°: rund 210 mm, quadrat 180 mm, rechteck 230 x 160Cutting area 60°: rund 120 mm, quadrat 100 mm, rechteck 120 x 100Cutting area -45°: rund 180 mm, quadrat 150 mm, rechteck 230 x 100motor: 1.3 UZMA 230DG  Hydraulic Bow  Double Mitre  Head  Heavy duty Structural steel machine. Standard Accessories: - M42 Bi-metal saw blade - Variable speed - Inverter control device - Coolant system - Auto. saw blade breakage power off system - Manual  vice - Hydraulic  Bow  - Blade tension Device - Pendant control - Mitre Head 2 directions  - Heavy Duty Gear Box Cpjdpsrzx Dlefx Afnju

Condition: new, Saw frame: Schwenkrahmenmeasurements of saw band: 3160 x 27 x 1,1speed of the tape: 20-100cutting area - round: 270cutting area - square: 270cutting area rectangle: 350 x 220messurements (LxWxH): 2230 x 770 x 1450working height: 910coolant pumpmotor: 0.12weight approx.: 525Cutting area 60°: rund 150 mm, quadrat 100 mm, rechteck 150 x 100 mmcutting area 45°: rund 240 mm, quadrat 170 mm, rechteck 270 x 210 mmCutting area -45°: rund 210 mm, quadrat 180 mm, rechteck 270 x 210 mmmotor: 1.5 Bandsäge KK Kletzer 270DGH Semi automatic Bandsaw Double Mitre  Head  Heavy duty Structural steel machine   Standard Accessories: - M42 Bi-metal saw blade - Variable speed  - Inverter control device - Coolant system - Auto. saw blade breakage power off system - Hydraulic vice - Hydraulic Bow Cpodpforzx Dtox Afneu - Blade tension Device - Pendant control - Mitre Head 2 directions   - Heavy Duty Gear Box 

Condition: new, cutting area - round: 280saw band dimension: (LxWxT) 340 x 27 x 0,9cutting area 45°: 230cutting area rectangle: 350 x 220cutting area 45° mitre flat: 240 x 180cutting speed: 20-100weight approx.: 595motor: 1,5 KK Kletzer UBS-S 280 Semi automatic Bandsaw Heavy duty Structural steel machine   Standard Accessories:  Codpfx Aforz Uzfonspu - M42 Bi-metal saw blade - *Variable speed  - Inverter control device  - Coolant system  - Auto. saw blade breakage power off system  - Hydraulic vice - Hydraulic Bow - Blade tension Device - Pendant control - Mitre Vice 

Condition: new, cutting area - round: 320saw band dimension: 4160 x 34 x 1,1cutting area 45°: 320cutting area rectangle: 610 x 320cutting area 45° mitre flat: 355 x 320cutting speed: 20-100messurements (LxWxH): 2100 x 1200 x 1350weight approx.: 1200 KK Kletzer UBS-S 320 GL  Semi automatic Bandsaw Mitre Head  Heavy duty Structural steel machine   Standard Accessories: - M42 Bi-metal saw blade   Codpfx Aorz Uziofnjpu - *Variable speed  - Inverter control device - Coolant system - Auto. saw blade breakage power off system - Hydraulic vice - Hydraulic Bow - Blade tension Device - Pendant control - Mitre Vice  - Heavy Duty Gear Box 

Condition: new, Saw frame: Schwenkrahmenmeasurements of saw band: 3160 x 27 x 1,1speed of the tape: 20-100cutting area - round: 270cutting area - square: 270cutting area rectangle: 350 x 220messurements (LxWxH): 2230 x 770 x 1450working height: 910weight approx.: 525Cutting area 60°: rund 150 mm, quadrat 100 mm, rechteck 150 x 100 mmcutting area 45°: rund 240 mm, quadrat 170 mm, rechteck 270 x 210 mmCutting area -45°: rund 210 mm, quadrat 180 mm, rechteck 270 x 210 mmmotor: 1.5coolant pumpmotor: 0,12 Band saw KK Kletzer 270DG Gravity feed Double Mitre  Head  Heavy duty Structural steel machine   Standard Accessories:  - M42 Bi-metal saw blade  Cedpforzx Dpox Afnopu - *Variable speed - Inverter control device  - Coolant system  - Auto. saw blade breakage power off system - Manual  vice - Gravity Bow  Bow - Blade tension Device - Pendant control - Mitre Head 2 directions   - Heavy Duty Gear Box

Condition: new, cutting area - round: 320cutting area 45°: 280cutting area rectangle: 420 x 220cutting area 45° mitre flat: 280 x 200cutting speed: 20-100saw band dimension: 3660 x 27 x 0,9motor: 1,5weight approx.: 625 KK Kletzer UBS 320  Bandsaw Heavy duty Structural steel machine basic operation    Standard Accessories:  - M42 Bi-metal saw blade  - *Variable speed  Cedpfx Aferz Uzbenopu - Inverter control device  - Coolant system   - Auto. saw blade breakage power off system   - Blade tension Device    - Material Support Stand - Mitre Vice  - Blade Brush 

Condition: new, cutting area - round: 320length of saw band: 4160 x 34 x 4,1cutting area 45°: 320cutting area rectangle: 450 x 320cutting area 45° mitre flat: 330 x 320cutting speed: 20-100messurements (LxWxH): 2230 x 1150 x 1350motor: 2,2weight approx.: 1030 KK Kletzer 320DGH  Semi automatic Bandsaw Double Mitre  Head  Heavy duty Structural steel machine   Codjrz Uzmjpfx Afnopu Standard Accessories:  - M42 Bi-metal saw blade  - *Variable speed  - Inverter control device  - Coolant system  - Auto. saw blade breakage power off system - Hydraulic vice  - Hydraulic Bow  - Blade tension Device  - Pendant control - Mitre Head 2 directions   - Heavy Duty Gear Box 

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Cjdsr I Ddkopfx Afnspu Purchased brand new in 2023 but never used.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 60115, Offer 25422 Hydraulic Two-Column Guided Mitre Band Sawing Machine (Automatic) Technical Data: - Fully automatic cutting process with hydraulic lifting/lowering of the saw frame - Manual mitre adjustment with hydraulic clamping - Automatic material feed unit, motorised mitre adjustment - Saw blade dimensions: 4400 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 15 – 150 m/min - Stepless cutting pressure regulation: 10 – 15 bar - Lowering speed: 0 – 300 mm/min - Cutting angle range: 30° – 90° - At 90° round: 335 mm - At 90° square/flat: 500 x 335 mm - At 45° round: 330 mm - At 45° square/upright: 320 x 335 mm - At 30° square/upright: 170 x 335 mm - Automatic material feed unit - Discharge roller conveyor: 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 6.5 kW Csdpfx Aox Aqxaefnopu - Space requirements approx.: W 2300 x H 1750 x D 2200 mm - Weight approx.: 1800 kg