Used Sircular Saw for sale (5,598)

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support Bwedpfsyyyw Aox Ab Ujk - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7651 Technical data: - Track width: 250mm - Shaft width: 250mm - Max saw blade diameter: 400mm - Saw blade bore diameter: 70mm - Max cutting height: 120mm - Table width with opening: 810mm - Table length: 1780mm – From above: - Pawls/kickers - Smooth pressure shaft - Pawls - Smooth pressure shaft - Shaft with saw blades - Smooth pressure shafts, 2 pcs – From below: - Guide - Pawls/kickers - Track - Central lubrication - Stepless feed speed adjustment - Feed motor 1.1kW - Main motor 37kW - Manual body lifting - Manual lifting of shaft with saw blades - Chip extraction connection diameter: 200mm - Overall dimensions (L/W/H): 2150x1480x1760mm - Weight: 1735kg ADVANTAGES – German-made – Stepless feed speed adjustment – Multi-blade saw, used, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR (at a rate of 4.25 EUR) (Prices may change depending on exchange rate fluctuations) Bwjdpfxoyyyd No Ab Uek

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Bodpfjx U Tymjx Ab Ujwk Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: used, Year of construction: 2021, only 24 operating hours – like new Base machine 1 pc Cutting technology meets the future The CONTROL series has always defined its own class – the premium class for vertical panel saws. But even this lead never stands still. We have developed the CONTROL into a vertical panel cutting centre of the premium class, with higher automation of the sawing process and additional equipment options. Above all, the 12" touchscreen computer and new machine software provide improved user comfort in every detail. Saw Frame • Precision manufacturing to 1/100 mm in key components • Massive, self-supporting welded saw frame with high torsional rigidity • Full-surface support panel made of birch plywood with integrated small parts shelf • Auxiliary stop profile with its own tape measure and 3 auxiliary stops for repeat cuts • Automatic detection of the center support Bwedpfxjyyqz Se Ab Usk • Automatic roller lock during the cutting process Saw Beam • Stable, durable steel saw beam construction • Automatic saw beam locking with cut position detection Saw Unit • Play-free, smooth-running guides • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Enhanced operator comfort thanks to largely automated operation • Laser-assisted display of horizontal cuts • Automatic clamping of the motor carriage • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for quick change to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake Control System • 12" touchscreen computer with optimal user guidance • Multilingual user interface • Tool database for high flexibility and absolute repeat accuracy • Fully automatic sawing process • Variable feed speeds from 10–25 m/min • Selectable saw cycle • Panel end detection • Constant return speed • Operating hours counter • Network connectivity Dimension Adjustment • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y including ABO (vertical axis for horizontal cuts) Design, Ergonomics • STRIEBIG’s signature product design • Multiple awards (including the Swiss Design Award) • Functionality and operator-friendly ergonomics Installation • Wall-mounted or free-standing (option) installation possible Note: Permissible ambient temperature: min. +5°C / max. +40°C Relative humidity: 19–95% If mains voltage fluctuations exceed ±10% of the nominal voltage at the installation site, a voltage stabilizer must be used. Type 5216 Cutting range 4300x2160/2016x80mm 1 pc Cutting length: 4300 mm Cutting height vertical cut: 2160 mm Cutting height horizontal cut: 2016 mm Max cutting depth: 80 mm Min cutting depth (automatic feed): 4 mm Min cutting depth (manual feed): 2 mm Exact installation dimensions can be found in the brochures or installation diagrams. ProLock Easy-Fix tool clamping system 1 pc Electronic positioning system "EPS-X" (horizontal axis for vertical cuts) 1 pc Paper holder 1 pc Small parts support, aluminum (2 pieces) 1 set Kit for free-standing installation (Types 5168, 5216, 5224, 6168, 6216, 6224) 1 set Storage location: Customer

Condition: used, Year of construction: 2005, power: 7.5 kW (10.20 HP), cutting height (max.): 170 mm, cutting width (max.): 1,100 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, height adjustment type: hydraulic, saw blade bore: 30 mm, rotational speed (max.): 5,500 rpm, rotational speed (min.): 2,800 rpm, total length: 3,300 mm, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,500 kg, Equipment: CE marking, No. 04528 Sliding table saw Martin T 73 BASIC Used, year of construction 2005 Sliding table 3000 mm Maximum cutting height 170 mm Maximum saw blade diameter 500 mm Saw blade bore 30 mm Cutting width 1100 mm Motor 7.5 kW Speeds 2800 / 4000 / 5500 rpm Hydraulic saw blade tilt 0° - 46° Hydraulic cutting height adjustment Circular saw ruler can be lowered Pneumatic saw shaft lock Cross table with fixed angle adjustment Bwedpfjyymtdsx Ab Uok Length stop extendable up to 3300 mm Sliding table with stepless locking Integrated contact for controlling the dust extraction system Central lubrication point Transport dimensions approx. 3300 x 2000 x 1800 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: excellent (used), Fezer Crosscut and Mitre Saw The powerful solution for workshop and construction site for cutting wood, aluminium, and plastics Type: KG 25 AC motor 220 Volt, 0.85 kW 2800 rpm Indexing for mitre cuts Any intermediate position can be locked by clamping screw. For 250 mm saw blade Weight: approx. 24 kg Cutting capacity at 90 degrees: H = 50 mm / W = 120 mm Location: ex stock 54634 Bitburg Bwedpfx Absyxx Evs Uek - immediately available -

Condition: excellent (used), Year of construction: 1979, Ulmia 1725 Precision Sliding Table Saw Bodpfxoyxx D Se Ab Uowk Precision miter cuts and fine joinery work. Saw blade adjustable in height and tilt. Saw blade swivels from 0-45 degrees according to scale and can be set precisely to the desired cutting height in any position. Tabletop with removable table insert and one guide groove each to the left and right of the saw blade. Slides longitudinally on ball-bearing segments in hardened and ground guide tracks, with return spring. Table size: 1100 x 700 mm Minimum distance from saw spindle to top of table: 60 mm Saw blade height adjustment: 60 mm Max. saw blade diameter: 350 mm Max. cutting height: 115 mm Cutting width to the side of the blade (normal): 360 mm Saw blade bore: 30 mm Table travel (normal): 430 mm Saw spindle speed: 4,500 rpm Motor power: 2.2 kW Height to top edge of table: 880 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° Bwsdpfeyxxzwex Ab Uok - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1989, functionality: fully functional, Kasto HBA 360 AU bandsaw incl. roller conveyor Bwodpfx Aeyxxfisb Uek Cutting range: 360 mm Saw blade dimensions: 5334 x 32 mm Length: 2310 mm Width: 2600 mm Height: 1700 mm Weight: 2600 kg We are available for further questions.

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Bodpoxvc N Dsfx Ab Uewk Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Bwedpfoxvc Rzox Ab Ujk Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), Numerical Control Power Control + Software Cadmatic 4 Professional No. 1 Infeed roller tracks (ca.) 32,000 mm Lifting table (mm) 5600 x 2200 Bwjdpfovnq H Eex Ab Usk VAC loader (sliding bridge) with fan suction for loading special or delicate panels 1° Rear-pusher, with No. 6 clamps/grippers Turning device (rotating unit) at 90° 1° Panel Saw - Max cutting width mm 5600 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 ( Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min 2° Rear-pusher, with No. 14 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 (cutting line with air cushion) Max blade projection (mm) 190 Scoring Unit (max. diameter saw / power) mm 200 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 600 (Kw 36) Adjustable speed of the saw carriage (QS) (m/min) 1 - 130 m/min Waste evacuation system with grinder (Kw 19.5) No. 2 Front supporting tables with Air blowing system (mm 800 x 2160) Plastic wheels coated with special material to avoid scratching delicate panels Automatic unloading System of the cut panels: N° 2 x Liftomat HAU-A 25/12 Automatic Stacking System with 8 stations

Condition: excellent (used), Angular sawing plant Numerical Control OSI Plus - Software Optiplanning N. 2 Pre-loading roller tables (mm) approx. 4500 x 2200 each Lifting table (mm) 4500 x 2200 1° Rear-pusher, with No. 5 clamps/grippers Bwodpfoukhd Ajx Ab Uok Turning device (rotating unit) at 90° 1° Panel saw (longitudinal) max. cutting width (mm) 4500 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 ( Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min Cutter for shredding trimmings 2° Rear-pusher, with No. 10 clamps/grippers 2° Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 152 Scoring Unit (max. diameter saw) mm approx. 215 Main Sawing Unit (max. diameter saw / power) mm 530 (Kw 30) Adjustable speed of the saw carriage (m/min) 1 - 170 m/min No. 2 Front supporting tables with Air blowing system mm 2200 x 1500 Automatic unloader (bridge) for cut panels "RBO (BIESSE)" Mod. Lifter with 6 stacking stations

Condition: excellent (used), CATALOG NUMBER 7903 Technical data: - track width: 450mm - shaft width: 420mm - installed saw blade: 400mm - max saw blade diameter: 450mm Bedpfsynkvdjx Ab Uewk - saw blade bore diameter: 80mm - max cutting height with 450mm blade: 160mm - table dimensions: 2230x860mm – from above: - kickbacks/stoppers - sliding shaft - kickbacks - smooth sliding roller - hold-down - shaft with saws - hold-down - 2 sliding, hold-down shafts – from below: - roller in front of the table - guide - stoppers - track - central track lubrication - manual lifting of saw shaft - electric body lifting: 0.75kW - stepless feed speed adjustment - extraction port diameter: 280mm - main motor: 75kW - overall dimensions (L/W/H): 2360x200x1960mm - weight: 3250kg ADVANTAGES – Czech production – used multi-blade saw – upper control panel – DTR (technical documentation) – very good condition Net price: 69,900 PLN Net price: 16,650 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (in case of larger currency fluctuations, the price may change)

Condition: excellent (used), Catalogue number 7280 TECHNICAL DATA - track width: 340mm - shaft width: 400mm - max blade diameter: 350mm - blade bore diameter: 80mm - max cutting height: 120mm - table width with clearance: 700mm - table length: 1720mm Bedpoymnrysfx Ab Uswk from above: - pawls - metal slip pressure roller - pawls - metal slip pressure roller - shaft with saw blades - 2 pcs metal slip pressure rollers from below: - guide bar - metal slip roller - pawls - track - electric body lifting 0.55kW - central lubrication - variable feed speed control 1.5kW - main motor 37kW - dust extraction nozzle diameter: 200mm - overall dimensions (L/W/H): 1800x1670x1780mm - weight approx. 2500kg – German made – Used multi-blade saw, in very good condition Original photos Net price: 76,900 PLN Net price: 18,300 EUR (depending on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width: 340mm - shaft width: 360mm - blade bore diameter: 70mm - max. blade diameter: 315mm - max. cutting height: 180mm Bwjdpfx Abjx S Nadj Uok * from above - feed shaft, toothed, pneumatically pressed - 2 rows of kickback fingers - 3 smooth pressure slip rollers - kickback fingers - shaft with saw blades - 3 smooth pressure slip rollers - kickback fingers * from below - infeed traction shaft, toothed - track - shaft with saw blades - track - stepless feed speed regulation via inverter - main motor 2x55kW - feed motor 4kW - electric lifting of upper body up/down - electric adjustment of saw blade shafts - central lubrication - extraction port diameter: 2x150mm - dimensions (L/W/H): 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Italian production – double shaft – ideal for large elements – used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,740 EUR based on 4.2 EUR rate (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: Bedpfx Aeyh Nr Ueb Ujwk - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 6650 TECHNICAL DATA - Max cutting height: 200 mm - Track width: 450 mm - Shaft width: 450 mm - Blade bore diameter: 80 mm - Shaft diameter: 60 mm - Min. blade diameter: 250 mm - Max. blade diameter: 350 mm - Max. width of cant: 870 mm Bodpeyk Hg Rjfx Ab Uowk - Min. length of cant: 1500 mm From above: - Pawls - Feed shaft, toothed, metal - Pawls - Feed shaft, toothed, metal - Pressure unit - Shaft with saw blades - 2 feed shafts, metal, pneumatically pressed From below: - Guide - Metal sliding roller - Pawls - Track - Shaft with saw blades - Track - Stepless feed speed adjustment via inverter 4-40 m/min - Main motors: 2 x 75 kW - Feed motor: 3 kW - Electric vertical movement of body up/down: 0.55 kW - Electric adjustment of saw blade shafts: 2 x 0.25 kW - Central lubrication - Extraction nozzle diameter: 2 x 300 mm - Dimensions (L/W/H): 3100 x 2600 x 2000 mm - Weight: approx. 6500 kg - Centering device included - Toothed feed rollers: 3 pcs - Smooth feed rollers: 8 pcs - Motor: 2 x 1.5 kW - Pneumatic top pressure - Side pressure - Dimensions (L/W/H): 4850 x 1100 x 1800 mm - Weight: approx. 1000 kg ADVANTAGES – Czech manufacture – Double-shaft design – Centering device – DTR documentation – Year of manufacture: 2010 – Used multi-blade saw, in very good condition Net price: 262,900 PLN Net price: 62,600 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (in case of significant currency fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1994, Panel saw F 90 with 3 m sliding table Cutting width: 1050 mm Max. saw blade diameter: 450 mm Motor power: 5.5 kW – 3 speeds Height adjustment: via handwheel Digital display for speed indication Cross table Extraction hood Bjdpfx Aox Nrxksb Uowk Location: ex customer site - immediately available -

Condition: used, Storage location: Supplier Bsdpfx Abjynttfj Uswk

Condition: used, Year of construction: 2024, New machine – Special price – Year of manufacture 2024 HAND GUARD Edition Single Flex unit. The image shows the system. HAND GUARD is based on early hazard detection to protect the operator from injuries and works in any application. The camera-monitored system first gives a visual warning to alert the user to an impending danger. If the hazard persists, the saw blade is lowered without causing any damage to the machine or material. HAND GUARD supports the processing of various materials such as wood, metal, and plastic. • Contactless and injury-free • Quick commissioning • 100% damage-free • Operates with concealed cuts • Does not need to be deactivated, permanent function • Max. 500 mm saw blade diameter can be fully retracted under the one-sided tilting saw unit as standard. Tilting range: 0 - 46°, equipped with a quick-change system for the main saw blade. Motorized height and tilt adjustment with a maximum saw blade protrusion of 179 mm (removal of the scoring unit may be required in some cases). Additionally, the control unit is positioned at eye level, allowing you to adjust the blade height and tilt, as well as, depending on the control package, the RPM and other functions. The new, clear industrial design marks the exceptional status of the Altendorf brand: This sliding table saw combines distinctive design with timeless aesthetics. The Altendorf double roller carriage is renowned for its smooth operation and precision. It can be locked steplessly in any position. The large double rollers keep the upper carriage absolutely precise in connection with the lower carriage within the respective guide rods. This running quality is maintained for decades, even under heavy use and contamination. The carriage construction is extremely torsion-resistant and dimensionally stable. An additional front support roller with a width of 300 mm is included, offering valuable support for cutting long workpieces on the rip fence. Positionable at 90° under the double roller carriage. 12" touchscreen with integrated keyboard • Automatic dimension correction at the rip and angle fence when tilting the saw unit • Stepless fine control of the axes via +/# keys • Easy axis calibration • Machine diagnostics, operating hours counter, USB interface • Recall last dimension entry (back function) • Conversion of pointed to blunt measurements at the rip and angle fence • Shear cut function with automatic calculation of missing angles or dimensions • Advanced tool management for up to 100 tool memory slots • Storage of scoring position (3-axis scorer) • Input for main blade core thickness & cutting width • Input for main tool speed Additional functions • Grooving: automatic step-by-step positioning of the rip fence • Chain dimension function: cutting sequences with identical distances at the rip fence • Oversize angle cut • Calculator function with result transfer to the axes • Geometric shapes, calculation of missing angles or dimensions • False miters, calculation of missing angles or dimensions • 9999 storable cutting programs • Standard provision for remote maintenance • Template holder directly next to the touchscreen Included accessories for Edition Single Flex: • Double roller carriage with carriage length of 3000 mm • Vario drive 5.5 kW (7.5 HP) VAR Bsdpfxsyyap Eo Ab Ujwk

Condition: used, Year of construction: 1997, dimensions of saw-band 3150 x 25,4 x 0,9 mm 20/40 m/min capacity 90 degrees: round 260 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 320 x 200 mm Bwsdeyyc A Iopfx Ab Usk capacity 45 degrees: round 230 mm capacity 45 degrees: square 210 mm capacity 45 degrees: flat 240 x 200 mm

Condition: good (used), Year of construction: 2008, Very neat semi-automatic bandsaw from Imet Type: BS 350 SHI 2SP Capacity: 350 x 270 mm Material probe Double-sided mitre cutting Bwedpfx Asywwi Deb Usk Mist and coolant lubrication

Condition: good (used), Year of construction: 2005, machine/vehicle number: 05-01-540, functionality: fully functional, operating hours: 10 h, power: 5.5 kW (7.48 HP), cutting height (max.): 800 mm, cutting width (max.): 1,200 mm, saw blade diameter: 305 mm, tilt adjustment saw blade: 90 °, height adjustment type: electric, rotational speed (max.): 5,000 rpm, rotational speed (min.): 3,000 rpm, Equipment: rotational speed infinitely variable, saw blade guard, scorer, Great working saw Bwedoynf Uuopfx Ab Ujk

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw always cuts to 0.5 for age hardy used Bodpfx Aboyngnio Uswk