Used Small Lathe for sale (9,729)

Condition: used, faceplate diameter 1.400 mm Isdpfonp Uhnsx Ac Ejii swing diameter 1.600 mm turning height 1.500 mm control Siemens 840 D workpiece weight 6.500 kg feed 3.600 mm/min. slide adjustment 1.000 mm turning speeds 10-315 mm/min. total power requirement / kW weight of the machine ca. / t dimensions of the machine ca. / m

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Iisdpfx Acsxwx Nvj Eoi Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2007, The Citizen Cincom M32 is a CNC lathe with a movable headstock designed for high-precision machining. In 2007, the M32 model was produced, which has the following main features: Maximum turning diameter: 32 mm (optional 38 mm) Iijdjvz Atdepfx Ac Esi Maximum turning length: 320 mm per clamping operation Maximum drill diameters (front): 12 mm Maximum tapping size (front): M12 (with cutting tap) Main spindle speed: up to 8,000 rpm Rear spindle speed: up to 8,000 rpm Number of tools: maximum 25 to 27 Dimensions (W x D x H): 2,860 x 1,465 x 1,900 mm Weight: 4,300 kg This model is equipped with a 10-station turret disk and offers a variety of tool configurations, including rotating tools for complex machining tasks. The machine is designed to ensure high precision and efficiency in manufacturing.

Condition: good (used), Year of construction: 2014, Swing over bed 660mm, maximum machining diameter 350mm, maximum machining length 1060mm, Iedpfxsxup Nbj Ac Ejii bar capacity 65mm, spindle speed 5,000rpm, 12 station turret, Mazatrol Smart control, swarf conveyor, & 3 jaw chuck.

Condition: good (used), Year of construction: 1994, functionality: fully functional, FOR SALE LATHE MORI SEIKI CL 15 CNC FANUC Iijdpjxv Aqzsfx Ac Eji

Condition: excellent (used), Year of construction: 1996, operating hours: 46,282 h, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,600 mm, total length: 11,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, number of slots in tool magazine: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission value at operator position: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Air humidity: max. 70% - Workpiece removal via sub-spindle - Max. sub-spindle speed: 4000 min-1 - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input and output resolution: - X/Z: 0.001 mm - C axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Largest thread pitch: 999.999 mm - Largest radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Speed override: 50…120% - Speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-functions: 3 digits - B-functions: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C AXIS): Main spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 min Sub-spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 min TOOL CARRIER 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW Iijdpfx Acewpa Ruo Eoi - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier quantity: 10 (14) - Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm - Chisel cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Switching time one station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z DIRECTION): - Max. speed: 4000 min-1 - Max. clamping diameter: 65 mm - Three-phase motor steplessly programmable: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw operation: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT LUBRICATION: - Per tool carrier: 1-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTICE: Due to sporadic work, the operating hours may still change slightly.

Condition: used, faceplate diameter 1.000 mm swing diameter 1.400 mm turning height 1.100 mm turning speeds 500 U/Min. U/min control Siemens 840 DSL Shop Turn slide adjustment 1.000 mm x-axis 2.000 mm Iijdpfx Acsnp Uhkj Esi z-axis 700 mm mm rapid traverse 6.000 mm/min. m/min total power requirement 62 kW weight of the machine ca. / t dimensions of the machine ca. / m

Condition: used, Year of construction: 2006, functionality: fully functional, Centre distance: 1.000 / 1.500 / 2.000 / 3.000 mm greates pass round over bed: 650 mm Swing diamter over gap: 670 mm Swing diameter over compound slide: 260 mm cross slide travel: 380 mm spindle diameter in front bearing: 140 mm turning speed range: 1 - 2.000 U/min Feed range cross: 0,001 - 1.000 mm/U Feed range longitudinal and tread pitch: 0,001 - 2.000 mm/U power feed cross: 9.000 N Ijdpfexwxwgex Ac Ejii power feed longitudinal: 12.000 N Drive power 40% / 60% / 100% ED: 33 / 27 / 22 kW Equipment: Chip conveyor, Suction MAHLE, Collect chuck SMW Autoblok, turret VDI40, 6 driven tool holders

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, TECHNICAL DATA - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle drive power: 7.5/5.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle drive power: 5.5/3.7 kW - Minimum C-axis resolution: 0.001° Ijdpfx Acow Igyre Ejii - Number of turret heads: 2 UPPER TURRET HEAD - Number of positions: 8 - Travel X: 140 mm - Travel Z: 235 mm - Travel Y: 70 mm (+/-35 mm) - Driven tool speed: 5,000 rpm - Driven tool power: 1.0 kW LOWER TURRET HEAD - Number of positions: 6 - Travel X/Z: 140 / 310 mm ELECTRICAL SUPPLY - Total connected load: 30 kVA WEIGHT AND DIMENSIONS - Required floor space: 2,220 x 1,460 mm - Machine height: 1,700 mm - Machine weight: 3,100 kg

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Iiedpexf Iamjfx Ac Eoi

Condition: good (used), Year of construction: 1996, functionality: fully functional, For sale Iiedpsxv Anasfx Ac Esi MORI SEIKI SL 15 lathe CNC FANUC

Condition: excellent (used), Year of construction: 2008, operating hours: 50,305 h, functionality: fully functional, machine/vehicle number: 02260008351, turning length: 600 mm, turning diameter: 324 mm, spindle bore: 72 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 185 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 7 m/min, rapid traverse Z-axis: 7 m/min, total height: 2,080 mm, total length: 4,890 mm, total width: 2,460 mm, overall weight: 6,500 kg, bar passage: 45 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, counter spindle speed (max.): 7,000 rpm, counter spindle bore: 57 mm, number of slots in tool magazine: 12, Equipment: documentation/manual, - Driven tools: 12 - Tool holder: VDI 40 - Power of driven tools: 12 kW - Torque: 10.5 Nm - Speed: 4,500 rpm Iiedpfx Aswun Nvec Esi - Including tool package - Including band filtration system - Including bar feeder MKE HL 12 PN, year of manufacture 2008

Condition: new, The Basic Plus is a versatile Conventional Horizontal Lathe within the Metal Lathes product group, designed for single part production. Its robust construction ensures precision, making it an ideal choice for repair shops, training institutions, and various workshops. The Basic Plus features hardened and ground headstock gears, a Camlock D1-4" mount with a bore diameter of 38 mm, and adjustable tapered roller bearings for improved functionality. With a compact design and a small footprint, this lathe offers an array of standard equipment including a quick change tool holder and a 3-axis position indicator. Taper turning is facilitated with a movable tailstock, and the robust cast-iron bed provides stability during operation. Explore the extensive selection of optional accessories to fully customize your lathe experience. Order online to elevate your workshop capabilities with KNUTH's high-quality machinery. Iodpfx Aeu Rc Htec Eeii

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, Conventional Lathe WEILER Praktikant 140 B Year of manufacture: 1985 Working area: Centre height: 140 mm Centre distance: 650 mm Swing diameter over bed: 280 mm Swing diameter over cross slide: 190 mm Spindle: Spindle taper: DIN 55027/DIN ISO 702-3 Gr. 5 Spindle bore: 43 mm Spindle diameter at front bearing: 70 mm Main drive: Drive power: 2.6 / 3.1 kW Speed range: 48 – 2,500 rpm Number of speeds: 16 Feed range: Number: 24, Longitudinal feed: 0.02 – 0.63 mm/rev, Cross slide: 0.006 – 0.2 mm/rev. Iodpfxsxw Sbxe Ac Esii Length x Width x Height: 1600 mm × 800 mm × 1300 mm Weight: Approx. 650 kg

Condition: used, Year of construction: 2013, The Citizen Cincom M32 is a CNC lathe with a movable headstock designed for high-precision machining. In 2007, the M32V model was produced, which has the following main features: The special feature of this machine is the open storage Maximum turning diameter: 32 mm (optional 38 mm) Maximum turning length: 320 mm per clamping operation Maximum drill diameter (front): 12 mm Maximum thread size (front): M12 (with cutting tap) Main spindle speed: up to 8,000 rpm Rear spindle speed: up to 8,000 rpm Number of tools: maximum 25 to 27 Dimensions (W x D x H): 2,860 x 1,465 x 1,900 mm Weight: 4,300 kg Iijdpfsvz Azbsx Ac Eei This model is equipped with a 10-station turret disk and offers a variety of tool configurations, including rotating tools for complex machining tasks. The machine is designed to ensure high precision and efficiency in production.

Condition: not inspected (used), Year of construction: 2021, functionality: unexamined, Star SR-32J sliding head CNC lathes - 4 available - see descriptions below Star SR-32J sliding head CNC lathe Serial no: 3174 (09/2015) with Fanuc Series 32i-Model B control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet GP20-2000 high pressure coolant system Serial no: 698 (07/2016) FMB Turbo 3-36/4200/A bar feed Iiodpjwxb Adefx Ac Esi Serial no: 48-260915 / R:686664 (2008) Star SR-32J II type B sliding head CNC lathe Serial no: 0700 (12/2020) with Fanuc Series 32i-Model B CNC control, Filtermist extraction Hydrajet UB20-2000-6TF high pressure coolant system Serial no: 1461 (2021) FMB Turbo 3-36/4200/A bar feed Serial no: 61-264515 / R:1824023 (2021) Star SR-32J II type A sliding head CNC lathe Serial no: 0714 (02/2021) with Fanuc Series 32i-Model B CNC control, Filtermist extraction, swarf conveyor and chip hopper Hydrajet UB20-2000-5F high pressure coolant system Serial no: 1490 (04/2021) FMB Turbo 3-36/4200/A bar feed Serial no: 61-264572 / R:1843360 (2021)

Condition: good (used), Year of construction: 2011, 450mm swing, 210mm max diameter, FANUC 0i Control, 51mm bar capacity, 12 station turret, 11/7.5kW Spindle Motor, 4,500 rpm, Ijdpjxuhwqjfx Ac Eeii collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: C535, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle speed (max.): 1,800 rpm, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, overall weight: 4,250 kg, distance between centers: 2,032 mm, COLCHESTER COMBI K4 R/600 Cycle Lathe TECHNICAL DATA & EQUIPMENT: Year of manufacture: 2003 Serial number: C535 Spindle speed: 1800 rpm Iisdpfx Acsxd D Rfj Esi Swing over bed and cross slide wings: 554 mm Centre height (over bed): 284 mm Swing over cross slide: 370 mm Swing in the gap x [length in front of faceplate]: 830 x [196] mm Spindle centre height from floor: 1238 mm Nominal distance between centres: 2032 mm Max. working length between centres: 2152 mm Spindle nose: D1-11 CAMLOCK Taper in spindle nose bush: No. 5 Morse taper Spindle bearing diameter: 145 mm Spindle bore through hole: 102 mm Spindle speed range: - Low: 4.5–450 rpm - High: 18–1800 rpm Cross slide (X-axis): - Travel (programmable limit): 290 mm Saddle (Z-axis): - Travel (programmable limit): 2032 mm Tailstock: - Quill diameter x travel: 95 x 145 mm - Morse taper in quill: No. 6 MT For further technical data, see the photographed data sheet Supplied with technical documentation as shown in the photos Supplied with accessories as shown in the photos, incl. tool holder The machine will be loaded onto a truck using an overhead crane. Please ensure suitable vehicle is provided. DIMENSIONS & WEIGHT: 6000 x 1800 x 1800 mm 4300 kg COLLECTION NOTES: This item is available from October 2025. A collection appointment on a specific day from 01.10.2025 must be arranged. FCA: 73235 Weilheim an der Teck (DE), loaded onto truck

Condition: new, The Turnado 280/1500 PRO is a state-of-the-art Conventional Horizontal Lathe from KNUTH, designed for robust and precise machining in the Engine Lathes category. This model embodies over 20 years of excellence, integrating modern advancements into the classic lathe framework. It features a new ergonomic design that enhances user operation and comfort, while the powerful main spindle drive ensures high torque across an extensive speed range. Significantly, the Turnado lathe maintains constant cutting speeds during face turning, adapting to the workpiece diameter for optimal results comparable to CNC machines. Its solid base, consisting of a heavily ribbed bed and rigid headstock, promotes durability and reliability. With features like a central lubrication system for maintenance ease, a micrometer bed stop for repeatability, and a suite of standard equipment, including quick tool change systems and a 3-axis position indicator, this lathe stands out in both performance and efficiency. To experience the benefits of the Turnado 280/1500 PRO for your machining needs in the Engine Lathes category, request a quote today. Iodpsuyinvefx Ac Ejii

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Iodpowuddvefx Ac Eoii Connected load kW: 40 (47 kVA)

Condition: good (used), Year of construction: 2023, Description Machine: Cincom B16E-VI Iodpfxevzg Sks Ac Ejii Type: 5-axis precision lathe with FANUC 0i-TD control system We are offering the machines together with an Iemca Elite 112/32 bar feeder (year of manufacture 2023). Technical Data Machining: Main spindle max. bar diameter: Ø 16 mm Max. machining length without re-clamping: 135 mm Main spindle max. drilling diameter: Ø 6 mm Main spindle max. thread diameter: M 6 Sub spindle max. bar diameter: Ø 16 mm Sub spindle max. drilling diameter: Ø 5 mm Sub spindle max. thread diameter: M 3 Spindles, Tools and Axes: Main spindle speed: 200 ~ 8,000 rpm Sub spindle speed: 200 ~ 6,000 rpm Driven tool speed: 200 ~ 4,500 rpm C-axis indexing main spindle: 1° Maximum number of tool stations: 16 pcs Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tool holder: 10 x 10 mm Drive Power: Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical Connection: 200 V, 50 Hz, 3-phase Main transformer: input voltage 400 V / output voltage 200 V Connected load: 5.2 kVA Pneumatic Connection: Compressed air connection: min. 5 bar Compressed air consumption: 44 NL/min Machine Data: Dimensions: 1,590 x 837 mm Machine height: 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control – CNC contouring control Fanuc 01-TD Smallest input increment: 0.001 mm Smallest output increment: 0.001 mm (Z) / 0.0005 mm (X) Input options: Incremental and absolute Interface: RS232 Main and sub spindle synchronization Standard Accessories Working area lighting Signal light (red/yellow/green) Part ejection and discharge device Coolant tank and central lubrication Door interlock Part catcher and finished parts container 5 turning tool holders (10 x 10 mm) Coolant system with movable jet arms Power chucking system for main and sub spindles

Condition: used, The Citizen M32 is a CNC lathe with a movable headstock that was designed for high-precision machining. The M32V model was current in 2008. Here are the most important technical data: Maximum bar diameter: 32 mm (optional 38 mm) Maximum machining length per clamping operation: 320 mm Maximum drilling diameter (front spindle): 12 mm Maximum threaded hole (front spindle): M12 (with cutting tap) Main spindle speed: up to 8,000 rpm Maximum clamping diameter (counter spindle): 32 mm (optional 38 mm) Maximum drilling diameter (counter spindle): 12 mm Maximum threaded hole (counter spindle): M12 (with cutting tap) Maximum workpiece length for the counter spindle: 145 mm Counter spindle speed: up to 8,000 rpm Number of tools: 25 to 27 Number of turning tools: 5 Number of driven tools: 5 to 7 Number of stations in the turret: 10 Tool sizes: Turning tools 16 mm square; Boring bar holders 25.4 mm diameter Dimensions (L × W × H): 2,860 × 1,465 × 1,900 mm Weight: 4,300 kg Iedpfx Acsvz Twgj Eoii This machine is characterized by its high rigidity and precision, which makes it ideal for complex machining tasks. It has a powerful main and sub spindle and versatile tool configurations that enable efficient and flexible production.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dear Sir or Madam, We are pleased to offer you a Traub TNL 26 CNC Swiss-type automatic lathe from the year 2004. The machine is in well-maintained, fully functional condition. Iiedpfxoxgg Rms Ac Eji Important Note: This particular model is equipped with only one turret. The TNL 26 was also manufactured in versions with two turrets – this offer explicitly refers to the version with a single turret. Technical Data (excerpt): Manufacturer: Traub Model: TNL 26 Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, lower position, 12 tool stations, driven tools (all-head drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ideally suited for the precise production of small and medium batches in the automotive, medical and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex site, ex works Inspection: possible at any time by prior appointment. Should you require further information or wish to arrange an inspection, I am at your disposal at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is offered with an Iemca Elite 112/32 bar feeder! TECHNICAL DETAILS Machining Main spindle max. bar diameter: 16 mm Max. machining length without regripping: 135 mm Main spindle max. drilling diameter: 6 mm Main spindle max. tapping diameter: M 6 Sub spindle max. bar diameter: 16 mm Sub spindle max. drilling diameter: 5 mm Sub spindle max. tapping diameter: M 3 Spindles Main spindle speed: 200–8,000 rpm Sub spindle speed: 200–6,000 rpm C-axis indexing on main spindle: 1° Rapid traverses Rapid traverse X, Y: 21 m/min Rapid traverse Z1, Z2: 15 m/min Tools Driven tool speed: 200–4,500 rpm Max. number of tool stations: 16 Tool holder: 10 × 10 mm MACHINE DETAILS Drive power Main spindle: 3.7 / 2.2 kW Sub spindle: 1.0 kW Driven tools: 0.5 kW Coolant pump: 0.25 kW Central lubrication pump: 3 W Electrical connection Operating voltage: 200 V Frequency: 50 Hz Phases: 3 Main transformer input voltage: 400 V Main transformer output voltage: 200 V Connected load: 5.2 kVA Ijdpfoxgd Rkjx Ac Esii Pneumatic connection Compressed air connection: Min. 5 bar Compressed air consumption: 44 NL/min Machine data Dimensions: 1,590 × 837 x 1,761 mm Spindle height (floor to spindle center): approx. 1,000 mm Machine weight: 1,150 kg Control Control type: CNC path control Fanuc 0i-TD Minimum input increment: 0.001 mm Minimum output increment: 0.001 mm (Z) / 0.0005 mm (X) Input mode: incremental and absolute Interface: RS232 Spindle synchronization: main and sub spindle EQUIPMENT Work area lighting Part ejector and removal unit Coolant tank and central lubrication Door interlock Parts catcher and workpiece container 5 turning tool holders 10 × 10 mm Coolant unit with swiveling spray arms Power chucking system for main and sub spindles

Condition: used, Year of construction: 2021, operating hours: 3,557 h, functionality: fully functional, Technical data With FANUC 0i-MF control - Table dimensions: 850 x 400 mm - Max. table load: 250 kg - Table height from the floor: 850 mm - Travel paths: - X-axis: 710 mm - Y-axis: 400 mm - Z-axis: 350 mm Spindles, tools and axes - Spindle speed: 12,000 min⁻¹ - Spindle cone: BBT 30 - Max. number of tool positions: 20 - Rapid traverse (X, Y, Z): 60 m/min - Tool dimensions: - Max. tool diameter: Ø 68 mm - Max. tool length: 200 mm - Max. tool weight: 3.0 kg - Tool change time: 0.9 sec Drive power - Main spindle: 13 kW - Coolant pump: 3.7 kW Ijdpsvzaw Tjfx Ac Ejii Machine data - Dimensions: 2,100 x 2,600 mm - Machine height: 2,700 mm - Machine weight: 3,150 kg Control - Type: FANUC 0i-MF with 8.4" LCD color monitor Automatic door The machine is equipped with an automatic door that makes it easier to open and close the machine. This ensures greater user-friendliness and safety during operation. The machine is equipped with a Keyarrow chip conveyor that ensures the efficient transport of chips and makes cleaning easier. First commissioning: 03.2021  Disclaimer Disclaimer: All technical data and information have been provided to the best of our knowledge and belief. We accept no liability for any errors or mistakes. Please check the information carefully and do not hesitate to ask questions if you have any questions.