Used Solvent Recovery for sale (986)

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints Hsdpfx Aszq Axzjk Uenu FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: like new (used), Year of construction: 2020, operating hours: 2,367 h, functionality: fully functional, machine/vehicle number: 10058088, Markem-Imaje SmartLase C350 CO2 Laser Marking Machine – SL350 Controller + BOFA ES500+ Extractor – 2020 Price: €10,000 excluding VAT Manufacturer: Markem-Imaje Model: SmartLase C350 Year: 2020 Condition: Used Location: Boxtel, Netherlands DESCRIPTION For sale: Complete Markem-Imaje SmartLase C350 industrial CO2 laser marking and coding system, including SL350 touchscreen controller and Markem-Imaje / BOFA ES500+ fume extraction unit. Manufactured in 2020 and used in a professional, automated food production environment. Designed for high-speed, permanent, non-contact marking of production dates, expiry dates, batch numbers, lot codes, serial numbers, and traceability information. The system is suitable for integration into automated packaging and production lines. A live demonstration of the laser marking system in operation can be arranged upon request. A second Markem-Imaje SmartLase C350 system may also be available for purchase. Please inquire about availability and combined pricing. INCLUDED EQUIPMENT 1. Markem-Imaje SmartLase C350 Laser Marker - Model: SmartLase C350 - Part no.: 10058088 - Serial no.: CN20450209 - Industrial CO2 laser marking technology - High-speed, non-contact coding 2. Markem-Imaje SL350 Controller - Part no.: 10058345 - Serial no.: EY20490001 - Manufactured: December 2020 - Touchscreen operator interface - Power: 100–240 VAC, 50/60 Hz - Total print count: 3,948,396 3. Markem-Imaje ES500+ Fume Extractor - Part no.: 10069039 - Serial no.: 50120740003 - Manufactured: November 2020 - Produced by BOFA International - Power: 230 V, 50 Hz, 10 A - Operating hours displayed: 2,367 - Industrial laser fume extraction APPLICATIONS - Food and beverage packaging - Cardboard boxes and cartons Hnsdpfx Ajz R N T Sok Ueu - Paper and plastic packaging - Flexible packaging films - Pharmaceutical and cosmetic packaging - Date and expiry coding - Batch, lot, and serial number marking - Automated packaging and conveyor lines Material compatibility depends on the laser configuration and substrate. ADVANTAGES - Permanent, high-contrast marking - No ink, ribbons, or solvents required - High-speed industrial operation - Low consumable requirements - Touchscreen control - Suitable for production line integration - Complete system with fume extraction CONDITION & AVAILABILITY Used industrial equipment, offered as a complete set. The machine can be inspected in Boxtel, Netherlands. A live demonstration in operation can be arranged by appointment. A second SmartLase C350 may also be available. Both systems can potentially be purchased together. Price: €10,000 excluding VAT. International buyers welcome. Collection and transport can be discussed. SEARCH TERMS Markem Imaje C350, SmartLase C350, SmartLase 350, SL350 controller, Markem Imaje laser coder, CO2 laser marking machine, industrial laser printer, laser date coder, laser coding machine, laser batch coding, expiry date printer, packaging laser marker, BOFA ES500+, ES500 Plus fume extractor, used laser marking machine, second-hand laser coder, laser marking equipment, Laserbeschriftungsmaschine, CO2 Laserbeschriftungsgerät, Lasermarkierer, Lasercodierer, Laserkennzeichnung, Markem Imaje Laserdrucker, gebrauchte Lasermarkiermaschine.

Year of construction: 2008, condition: like new (used), PERISSINOTTO 45Kw pump. Production 25 cubic meters / hour Hsdpju Avu Usfx Ak Uonu No.2 dryer screen vibrators are missing, we can supply them new, price separately.

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). Hjdpfx Aoz Rvi Eek Usnu This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Condition: excellent (used), mileage: 753,000 km, power: 265 kW (360.30 HP), first registration: 12/1988, fuel type: diesel, axle configuration: 6x2, fuel: diesel, driver cabin: day cab, gearing type: mechanical, number of gears: 16, suspension: steel, Year of construction: 1988, = Additional options and accessories = - Rotating beacon Hedpfx Aozr Hlbek Ujnu - Tool box = Notes = 6x2 Tow truck Two 20-ton winches Extendable boom German registration In very good condition!! Ready for immediate use = Further information = Axle configuration Suspension: Leaf spring suspension Front axle: Steerable Rear axle 1: Steerable Weights Unladen weight: 16,380 kg Payload: 9,620 kg GVW: 26,000 kg Functional Body manufacturer: ZF Environmental Emission class: Euro 0 Condition Technical condition: very good Visual condition: very good

Condition: used, mileage: 460,713 km, power: 251 kW (341.26 HP), first registration: 04/2019, fuel type: diesel, tire size: 315/60R22,5, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, fuel tank capacity: 200 l, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, total length: 9,370 mm, total width: 2,510 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,600 mm, loading space width: 2,480 mm, Equipment: AdBlue, air conditioning, airbag, cruise control, electric window regulation, onboard computer, = Additional Options and Accessories = - Adaptive cruise control - Heated mirrors - Air conditioning = Additional Information = General Information Hnedpfjz S Iqqex Ak Ueu Year of manufacture: 2019 Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Axle Configuration Tire size: 315/60R22.5 Front axle: Max. axle load: 7500 kg; Axle brand: MICHELIN XMULTI; Tire tread depth left: 20%; Tire tread depth right: 20% Rear axle: Max. axle load: 11500 kg; Axle brand: MICHELIN XMULTI; Tire tread depth left: 80%; Tire tread depth right: 80% Weights Unladen weight: 8,185 kg Payload: 11,915 kg GVW: 20,100 kg Maintenance MOT (periodic technical inspection): valid until 02/2027 = Company Information = Hello

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor Hodsz Rnu Tspfx Ak Uenu For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: used, mileage: 369,767 km, power: 368 kW (500.34 HP), first registration: 04/2013, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: green, gearing type: automatic, emission class: euro5, suspension: air, loading space length: 5,200 mm, loading space width: 2,510 mm, loading space height: 1,100 mm, Year of construction: 2013, Equipment: ABS, AdBlue, air conditioning, central locking, differential lock, trailer coupling, = Additional Options and Accessories = Other Hedpfxozc Rhcj Ak Uonu - Remote-controlled central locking - Lift axle - Air suspension - Fifth wheel coupling - Spotlights Other - Sun visor = Notes = Loading space: 520 cm Loading floor height: 110 cm Loading height in wheel well: 90 cm. = Additional Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Tire size: 315/60R22.5; Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Unladen weight: 10,300 kg Payload: 17,700 kg GVW: 28,000 kg Identification Model number: FM 500 6x2 / MACHINE TRANSPORT / = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the texts provided.

Condition: used, mileage: 1,000 km, power: 115 kW (156.36 HP), color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, = Further Options and Accessories = - Rear air suspension - Front air suspension = Notes = Hnjdpfx Ajyfqnhsk Uju - Mr. Rudolph will be happy to assist you by phone at: Iveco Daily 35S16 / Flatbed / Wheelbase 3,450 mm Cargo area dimensions in mm: L: 3,500 x W: 2,100 x H: 400, comfort driver's seat, reversing camera, rear parking sensors, light and rain sensor, AEBS emergency brake assist with City Brake, electrically adjustable and heated exterior mirrors, speed limiter 160 km/h, driver drowsiness warning system, traffic sign recognition with intelligent speed assist (ISA), air suspension, front airbags for driver and passenger with seatbelt tensioners, AdBlue tank 20 l, fuel tank 63 l between chassis side members, 8-speed automatic transmission, 12V 13-pin trailer socket, towing capacity 3.5 t, ball-type trailer coupling, 225/65R16 all-season tyres, and much more. Mr. Rudolph will be happy to assist you by phone at: Should you wish to lease or finance this vehicle, we will be happy to provide you with a tailored offer. We are also happy to trade in your used commercial vehicle. Errors and prior sale excepted! Further information can be found on our website: ... ESP, particulate filter = Further Information = Engine displacement: 2,287 cc gross vehicle weight: 3,500 kg Please contact Tobias Ebert for more information.

Condition: like new (used), Year of construction: 2018, operating hours: 2,364 h, functionality: fully functional, machine/vehicle number: NC18F82104, Nordson DuraBlue 4 adhesive application system with MiniBlue II SureBead heads DuraBlue 4 tank, p/n 1026750, 2364 operating hours Adhesive hose with single Mini BlueII SureBead head, 0.2 mm diameter Adhesive hose with dual-module Mini BlueII SureBead head, 0.2 mm diameter Tank in very good condition, pump with no leaks, pump pressure checked with a pressure gauge, reading 60 bar. Prior to sale, a service inspection was performed, including cleaning and flushing of the entire adhesive system, bypass regeneration, and filter replacement. The tank is compatible with standard AD41 guns and spray systems. Hnodpoz Rnqbofx Ak Usu The system's operating time (2364 hours) indicates it was not used extensively. Adhesive hoses are undamaged, adhesive heads are leak-free, adhesive modules are leak-free and functioning correctly. The system has been flushed with solvent and can be used with any adhesive.

Condition: excellent (used), mileage: 31,203 km, power: 184 kW (250.17 HP), first registration: 07/2008, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 200 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 8, emission class: euro5, total length: 8,950 mm, total width: 2,450 mm, permissible axle load (axle 1): 4,800 kg, permissible axle load (axle 2): 8,500 kg, Year of construction: 2008, Equipment: ABS, EBS, USB port, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Rear work lights - Front work lights - Armrest - AUX input - Outside temperature display - Cup holder - Heated mirrors - Power brake booster - Sunroof/hatch - Differential lock - Differential lock - Tachometer - Electrically adjustable, heated mirrors - Driver’s seat height adjustment - Remote central locking - High beam - Windscreen - Enclosed cab - Tinted glass - Hydraulic system - Height-adjustable steering wheel - Front seat height adjustment - Cab - Foldable exterior mirrors - Air conditioning - Load protection grille - LED lighting - Air-suspended seats - Air horns - Air suspension - Centre armrest - Particulate filter - PTO - Radio/CD player - Spare wheel - Reversing camera - Disc brakes - Headlight height adjustment - Sleeper cab - Sun visor - Immobiliser - Tachograph - Partition wall - Pre-heater - Winch = Additional Information = Technical information No. of cylinders: 6 Engine displacement: 5,880 cc Front axle: Max. axle load: 4,800 kg; Steered Rear axle: Twin tyres; Differential lock; Max. axle load: 8,500 kg Weights Unladen weight: 7,190 kg Payload: 4,800 kg Gross vehicle weight: 11,990 kg Condition Technical condition: very good Hsdpfx Asz Ikp Tok Uonu Visual condition: very good Damages: none = Company Information = Nidro Cars Holland is located in the centre of the country and is the right address for purchasing your car, van, or truck. The indicated price is the 'internet take-away price'. For questions or a test drive, please contact us: SEE OUR ENTIRE STOCK AT All types of trade are possible with us! (Our advertisements are compiled with great care, but no rights can be derived from their content.)

Condition: good (used), Year of construction: 2017, operating hours: 5,313 h, functionality: fully functional, machine/vehicle number: 6700-113201, overall weight: 1,525 kg, load capacity: 300 kg, arm reach: 2,700 mm, This is an ABB IRB 6700-300/2.70 industrial robot with an IRC5 controller and an RW6 PC, manufactured in 2017. It is supplied with a Z.TT.1Axes_2000 rotary table. We would also be happy to offer this robot as a fully refurbished unit! The controller includes the following options: VDPUC Driver RobotWare Base English 888-2 PROFINET Controller/Device 963-1 PROFIenergy 687-1 Advanced Robot Motion 603-1 Absolute Accuracy 988-1 RW Add-In Prepared 606-1 Conveyor Tracking Hjdpfoz Ngfnex Ak Uonu 608-1 World Zones 610-1 Independent Axis 611-1 Path Recovery 612-1 Path Offset 885-1 SoftMove 1180-1 Tool Control 613-1 Collision Detection 614-1 FTP, SFTP, and NFS client 616-1 PC Interface 688-1 RobotStudio APP Connect 623-1 Multitasking 624-1 Continuous Application Platform 813-1 Optical Tracking 625-1 Discrete Application Platform 628-1 Sensor Interface 689-1 Externally Guided Motion (EGM) 1341-1 / 1520-1 Integrated Vision Interface 630-1 Servo Tool Change

Year of construction: 2004, condition: used, functionality: limited functionality, machine/vehicle number: ST 5151, We offer this used Envirotec Envitherm 50.0/3 W thermal afterburning system, manufactured in 2004. Manufacturer's serial number: ST 5151 Year of manufacture: 2004 Three-chamber operation Exhaust gas volume: 50,000 Nm³/h Hedpfxoz Stbzs Ak Uonu Combustion chamber temperature: 800°C The system essentially consists of three reactor vessels, which are filled with honeycomb bodies as heat storage. The system is equipped with two hot bypasses and an energy recovery system. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, mileage: 136,735 km, power: 118 kW (160.44 HP), first registration: 11/2017, fuel type: diesel, tire size: 255/75R17.5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: orange, gearing type: mechanical, number of gears: 5, emission class: euro6, suspension: steel-air, total length: 6,900 mm, total width: 2,350 mm, total height: 3,100 mm, loading space length: 4,950 mm, loading space width: 2,220 mm, loading space height: 900 mm, Year of construction: 2017, Equipment: ABS, AdBlue, cruise control, traction control, trailer coupling, = Additional Options and Accessories = - Air suspension - Radio - Sun visor - Tool box = Further Information = Tire size: 255/75R17.5 Front axle: Steered; Tire tread depth left: 35%; Tire tread depth right: 35%; Suspension: Leaf spring suspension Rear axle: Dual tires; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60%; Suspension: Air suspension Unladen weight: 4,350 kg Payload: 3,140 kg GVW: 7,490 kg Model number: 8-160L OPRIJ / MACHINE TRANSPORT Hedpfx Akjz Dg E Nj Usnu = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Main equipment includes: * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 * 40 HP * 415V / 50Hz Hjdpfx Akez Eh Ihj Uenu * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Condition: used, Year of construction: 2016, functionality: fully functional, number of ink cartridges: 8, color channels: 8, number of print heads: 2, resolution (max.): 900 dpi, paper width (max.): 1,600 mm, number of feeding trays: 1, total length: 2,945 mm, total width: 730 mm, total height: 1,310 mm, type of input current: DC, input voltage: 230 V, Roland TrueVIS VG-640 – Specifications Hsdpfxjz E U Ubj Ak Uonu Brand: Roland DG Model: TrueVIS VG-640 Machine: Large-format eco-solvent printer & cutting plotter Year of manufacture: 2016 Condition: Used; print heads require thorough cleaning. Possible replacement recommended. Print width: maximum 1,600 mm Max. media width: 1,625 mm Ink: Roland TrueVIS TR2 Ink configuration: CMYKLcLmLk + M Max. print resolution: 900 dpi Print & Cut: Yes, integrated Cutting speed: 10–300 mm/sec. Cutting force: 30–500 gf Blade: Roland CAMM-1 series Media thickness (printing): maximum 1.0 mm with liner Media thickness (cutting): maximum 0.4 mm with liner / 0.22 mm without liner Heating: integrated print heater and dryer Dimensions including stand: approx. 2,945 × 730 × 1,310 mm Weight including stand: approx. 205 kg Software: Roland VersaWorks

Condition: used, mileage: 660,885 km, first registration: 08/2000, fuel type: diesel, wheelbase: 4,570 mm, fuel: diesel, color: white, gearing type: mechanical, Year of construction: 2000, Truck / Convenience Store MAN 12 224 First commissioned: 10.08.2000 Manual transmission 660,885 km Breakdown/sliding platform Length: 5.3 meters Width: 2.3 meters Height from the ground: 1.05 meters With hydraulically adjustable winch. With heavy-duty basket Payload: 4870 kg Total weight: 11,990 kg Tires: +/- 30% Hnjdpfx Akezic H Ae Uou Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, mileage: 810,728 km, power: 390 kW (530.25 HP), first registration: 08/2018, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: air, total length: 10,200 mm, total width: 2,550 mm, Year of construction: 2018, DAF XF 530 6x2 Superspace cab. Full air suspension. Lift axle. PTO. MX engine brake. Loading box: 760 cm x 254 cm. Loading height: 101 cm. 4 x wheel well. Tool boxes. Hydraulic ramps. Stacking holes. = Further information = Brakes: Disc brakes Suspension: Air suspension Hnjdpfx Ajz H Tn Nsk Uou Front axle: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 1: Tire size: 2995/60R22.5; Double tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80% Rear axle 2: Tire size: 355/50R22.5; Tire tread depth left: 30%; Tire tread depth right: 30% Number of cylinders: 6 GVWR: 27,000 kg Price: Upon request Model number: XF 530 6x2 / OPRIJ - MACHINE TRA = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 1,800 mm, total length: 3,500 mm, total height: 2,500 mm, High-quality degreasing and cleaning system based on PER This system is a high-quality and high-performance degreasing and cleaning system based on perchloroethylene (PER) with a standard basket size. Hjdpozmxlpofx Ak Ujnu Thanks to two pre-treatment tanks, integrated ultrasonic cleaning, and vacuum drying, the system enables safe, thorough, and fast degreasing of a wide variety of metal workpieces. The complete stainless steel piping and high-quality system components ensure high operational reliability and a long service life. The system has been professionally overhauled and is ready for immediate use. An inspection of the system while it is running is possible at any time in 75447 Sternenfels after prior arrangement. We are always available to provide further information or answer any questions you may have. We look forward to your inquiry! System equipment: - Workpiece handling - Spray system - 2 x hot flushing systems - Ultrasonic cleaning with 1.0 kW / 25 kHz - Process filter 100 μm - Fine filter 5 μm - Vacuum drying - Vacuum distillation - Adsorption unit Technical data: Solvents that can be used: Perchloroethylene PER Filling volumes: 600 dm³ Operating mode: 2-shift Connected load: 40 kW Compressed air: 6 bar System weight: 3000 kg Throughput: Up to 5 batches/h (150 kg/h) Basket dimensions: 480 x 320 x 300 mm

Condition: used, functionality: fully functional, Central ventilation unit HELIOS Air 1 XH1500 with highly efficient heat recovery and integrated air reheating. For controlled supply and exhaust ventilation of larger residential, commercial, or industrial areas. 2 EC fans at 0.5 kW each, 1,490 m³/h at 350 Pa. Electric preheating coil 3.9 kW, electronic reheating coil 3.8 kW, cross-flow heat exchanger, integrated filter box. Includes HELIOS Universal control unit ECO and 2 HELIOS duct sensors TFK – a functionally complete system. Technical data: - Air flow rate 1,490 m³/h at 350 Pa; fans 2 x 0.5 kW EC - Preheating coil 3.9 kW / Reheating coil 3.8 kW; cross-flow heat exchanger; integrated filter box - Control system: HELIOS Universal control unit ECO and 2 duct sensors TFK included - From a commercial environment, sold in its current condition without warranty. More units and equipment are continuously being offered for sale as part of a laboratory and pilot plant liquidation – inquiries are welcome. Hedezmaqaepfx Ak Uonu Sold on behalf of a customer via the Köck auction house. Located in eastern Austria, exact address available upon request. Collection/dismantling by the buyer.

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Condition Used, still installed. Inspection on site is possible. Availability Hnsdpfxsz Sk Aqs Ak Uju Immediately. Location: Spain.

Condition: used, mileage: 743,776 km, power: 279 kW (379.33 HP), first registration: 06/1982, fuel type: diesel, tire size: 295/80R22.5, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 10, suspension: steel, total width: 2,500 mm, Year of construction: 1982, Equipment: crane, trailer coupling, = Additional Options and Accessories = - Lift axle - Pintle hitch - Power Take-Off (PTO) - Radio - Sun visor = Notes = Original Dutch truck. APK / TUV / MOT: 02-17-2027 = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Tire size: 295/80R22.5 Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 1: Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Dual tires; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Hjdpfoyvi I Nex Ak Uonu Weights Unladen weight: 15,350 kg Payload: 9,150 kg GVW: 24,500 kg Functional Crane: - Maintenance APK (Technical Main Inspection): Valid until 02/2027 Financial Information Price: On request Identification Model number: R142 V8 6x2 / TOW TRUCK = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, Fully Automatic Solvent Cleaning System KP50 HMA For operation with solvents (hydrocarbons or modified alcohol) under full vacuum. The cleaning and drying process runs fully automatically in a closed working chamber under vacuum. Component cleaning is performed via spraying, turbulence flooding, ultrasonic cleaning, and vacuum-assisted cleaning with freshly filtered and distilled solvent from the two storage tanks. Additionally, the system offers vapor degreasing with ultra-pure solvent vapor directly from the main distillation system. The final vacuum drying step ensures components are 100% dry, and the dual condensation stage minimizes solvent loss as well as emission and workplace exposure values (AGW). Technical data / Equipment: - 2-tank FULL VACUUM system incl. main and bypass distillation - Designed for flammable solvents (FP >55°C) - Includes basket holder with swing/rotation device - Basket dimensions: 520 x 320 x 200(h) mm - Batch weight: max. 50 kg/batch - System dimensions: approx. 2,300 x 2,250 x 3,000 mm (W x D x H) - Ultrasonic: 750 W, 40 kHz - 2 bag filters size 1 + preparation for an additional filter - Automatic working chamber door - Working chamber door in glass - Double loading table (sideways movable) in front of working chamber Hodpoyi Sf Nsfx Ak Ujnu - 12" control panel - Main and bypass distillation - Remote maintenance module A chiller unit can be supplied optionally, if no cooling water is available on site. Price excl. VAT, transport, assembly/commissioning

Condition: excellent (used), The VAC-7HS abrasive recovery system is an electrically powered vacuum abrasive recovery system specifically designed for use with mineral abrasives, which typically generate more dust. The VAC-7HS abrasive recovery system is equipped with a particularly powerful side-channel blower, an integrated, high-performance cartridge filter with pulse-jet cleaning, a separate dust pre-separator SC-500 with manual emptying, and a 0.3 m3 open-air filter. It also includes a stationary storage silo for manual refilling of the blasting pot (manual shut-off valve), a bottom hopper, and suction hoses. The VAC-7HS abrasive recovery system can be used universally for recycling for further reuse or for a big bag filling station for the disposal of the mineral abrasive. Hedpfx Aezarybjk Usnu

Condition: used, Year of construction: 2023, Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech), built in 2023 for filled beverage cans. The machine brings cold-filled cans from 5 °C to 25 °C with a 40 °C water spray over a treatment surface of 9 m², at an output of 35,000 cans per hour. It was configured for 0.33 l and 0.15 l cans. The tunnel body, frame and pipework are stainless steel. The machine is steam-heated, with a multi-tubular heat exchanger for condensate recovery, and a Siemens PLC with teleservice and a touchscreen HMI runs the process. The machine is currently installed and was seen in operation. Technical details - Year of manufacture: 2023 - Output: 35,000 cans/h - Can sizes: 0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm - Treatment surface: 9 m², single deck, 1 module - Treatment time: min. 4.5 minutes - Product temperature: 5 °C inlet, 25 °C outlet - Spray water temperature: 40 °C - Steam consumption: approx. 508 kg/h at 3 bar - Make-up water: approx. 1 m³/h - Instrument air: approx. 500 Nl/h at 6 bar - Installed power: 9 kW - Electrical supply: 400 V, 50 Hz - Conveyor height: 1,200 mm ± 30 mm - Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm including side piping) - Height: approx. 1,800 mm - Service clearance: 800 mm around the machine - Connections: water inlet 15-20 °C max. 2 bar, steam 3 bar, air 1/2" at 6 bar, basin overflow DN 100, basin drain 1 1/2" BSP Equipment - Single-deck tunnel warmer, 9 m², 1 module - Multi-tubular heat exchanger for condensate recovery - 1.1 kW blower for water recovery - Tank with condensate booster pump Hjdez Sp Anopfx Ak Usnu - Air conditioning unit - Active infeed and outfeed conveyor - Side inspection windows on the spray zone - Siemens PLC with teleservice, touchscreen HMI with process overview - Profinet port, cycle pause and auxiliary start buttons, emergency stop, main switch, signal tower Condition and availability - Built in 2023, currently installed and in operation - Layout drawing available - Availability on request - Location: Albania