Used Sorting for sale (724)

Year of construction: 2013, condition: ready for operation (used), A Probat coffee grading machine for sorting out defective coffee beans is available. Machine dimensions X/Y/Z: approx. 1200mm/1000mm/1800mm, weight: approx. 450kg. An on-site inspection is possible. Godpoxbhh Asfx Aa Ajir

Condition: ready for operation (used), Year of construction: 2013, A lifting, tilting, and sorting system for bulk materials within grid boxes is available. The system lifts the grid boxes approximately 3-4 meters high, tilts them into a transport vibrator, and the parts are then provided to the sorting system in a reduced quantity (feed rate regulation). Load capacity: 1000kg, pressure: 140bar. Documentation available. On-site inspection is possible. Expected to be available from the end of 2024. Giedpfxsuxdhho Aa Aor

Condition: ready for operation (used), Year of construction: 2014, A Cimbria optical color sorting machine for bulk materials is available. Nominal throughput capacity: approx. 7t/h, chutes: 7, sorting width: approx. 1200mm, max. number of defect parameters: 16, discharge precision: +/-0.5mm, accuracy: over 99%, inlet height: approx. 2500mm. Machine dimensions X/Y/Z: approx. 3500mm/1800mm/2200mm, weight: approx. 1200kg. Documentation available. On-site viewing is possible. Giedpfx Aexxl Nlja Aor

Condition: good (used), MAREL? grader / Outsorter. Conveyor length - 523cm. Conveyor width - 50cm. Conveyor height - 162cm. Length of grader arms - 68cm. Without check weigher. Gijdpfxefgwpko Aa Aor

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, How do you do? We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH Gedsuanqaopfx Aa Aoir

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder SORTIMAT Vibratory bowl, sorting device / screw feeding with vibratory feeder for screw assembly technology Feeding system, feeding unit Manufacturer: SORTIMAT Technology GmbH & Co. Model: SM 200 Year of manufacture: approx. 2000 Top bowl diameter: 270 mm Bottom bowl diameter: 180 mm Internal bowl height: approx. 75 mm Sorting track width: 13 mm Overall height (drive + bowl with sorting track): 250 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24VDC power unit). Giodex N Ik Aspfx Aa Asr - REO controller type Reovib R6 / 439 for adjustable vibration speed Required space Ø x H: 270 x 250 mm Weight: 17 kg In good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which parts are oriented 2) Drive unit, which creates vibrations in the sorting bowl through mechanical oscillations, thus moving the parts.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, Renholmen greensorting line 45 sorting pockets, sticking machine with sticks handling and Finnscan + OT-laite, speed is 100 m/min and it is fully automated line with stickhandling one operator, automation is made 2019 Workpiece length max - 6.100 mm Godexg Rgxepfx Aa Ajir Maximum sorting speed: 130-150 pcs/min Maximum capacity: 260,000 m3/year

Condition: new, Year of construction: 2026, functionality: fully functional, Technical Details of the VS BIG (Two-Deck): • Top deck: 130 x 130 mm screen mesh • Bottom deck: 90 x 90 mm screen mesh • Fixed metal brake (instead of rubber brake) • 400V power connection Conveyor Belt CB 3000: • Without standard frame with wheels • Fixed frame at the bottom Gjdpfx Aaoyirx Ns Ajir This setup allows for efficient and precise screening directly on-site!

Year of construction: 2003, condition: good (used), Sorting line with 23 pockets and wood chipper Gisdpfxjxuh Sbe Aa Aor

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! Gisdpfx Aaswav R Sj Ajr If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2009, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 4870 mm (470 + 3700 + 700 mm) Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Channel width: 320 mm Gsdpfx Asl Dw U Soa Aoir Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.

Year of construction: 2009, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes Giedpfxjl Dxaws Aa Ajr It can be used in a Z shape (as an application tape) and straight. Manufacturer: Knapp Belt length: 6200 mm (690 + 5280 + 230) Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.

Year of construction: 2011, condition: excellent (used), Several pieces of Knapp conveyor belt and application belt are for sale in several sizes It can be used in a Z shape (as an application tape) and straight. Gisdpfx Asl Dw Uvea Aer Manufacturer: Knapp Belt length: 3950 mm (1050 + 2300 + 600 mm) Travel speed: 30 meters/minute Height adjustable Belt width: 280 mm Channel width: 320 mm Total width: 380 mm Tape material: rubber fabric, minimally ribbed in the longitudinal direction. Frame: powder-coated steel Drive: Geared electric motor Sew-Eurodrive Electric power: 0.37kw, 50Hz, 400V The indicated price applies to one piece.

Year of construction: 2007, condition: good (used), Oriented feeders GASSNER Dynasort DH 600 + Gsdsdwhr Djpfx Aa Ajir Gassner Dynasort designed max: 36.000./h Working width 600 mm geared electric motor 3-4kw, 400v 50 Hz Height: 4800 mm approx If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 19,000 h, functionality: fully functional, total width: 1,500 mm, total length: 8,000 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, pneumatic connection: 8 bar, Equipment: documentation/manual, Dear Sir or Madam, Godpfx Aeydct Tja Aeir We hereby offer our optical sorter from the renowned company Marcelissen for sale. Due to an increase in our production volume, the system no longer meets our current requirements, which is why we have decided to switch to another manufacturer. The machine impresses with the following technical specifications: - 4 ejection points per side - 2 lanes: each equipped with two black/white cameras and two color cameras - Pneumatic rejection of defective potatoes - Sorting capacity: Up to 100,000 tubers per hour The system can be inspected by appointment. Dismantling will also be coordinated with the buyer. If you are interested or have any further questions, please do not hesitate to contact us. We look forward to hearing from you. Best regards,

Condition: ready for operation (used), Logsorting line with 14 + 1 pockets ( 2 x 7 ) Rema system with measuring frame type 9001 Hydraulic log kickers Gijdpfx Aer Hbcfsa Ajr

Year of construction: 2022, operating hours: 200 h, condition: like new (used), functionality: fully functional, The AirBasic is a portable machine for separating light and heavy components of various bulk materials. The machine is in as-new condition and has seen very little use. Operating instructions and data sheets are available as PDF files. Giedoyddazspfx Aa Asr

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24VDC power supply). - REO controller type REOVIB R6 / 439 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Giedpfjxrgvmex Aa Aer - Mounted on base frame made from aluminum profile system Required space Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which the parts are aligned 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations and thereby moves the parts.

Condition: used, Year of construction: 2015, functionality: fully functional, We are offering for sale an X-BELT SORTING SYSTEM (FLEXSORT SC3) from the manufacturer DEMATIC. GENERAL DESCRIPTION: - The system offered is a Dematic X-Belt FlexSort SC3 sorter, ideal for logistics centers, sorting hubs, e-commerce, retail, and high-throughput operations. - Pre-owned (2015) X-Belt sorter providing precise, fast, and silent sorting thanks to its motorized trays with electromagnetic drive. The equipment has been dismantled from an active site and is available immediately. MAIN FEATURES: Circular sorter: - Up to 12,000 items/hour - Positive sorting on both sides - Maximum sorter speed: 2 m/s - Sorter designed for rapid maintenance (removal in under 5 minutes) - Powered by linear motors - Total footprint: ~2,700 m² Cross-belt trays: - Cross-belt tray size: 800 mm x 450 mm - Minimum item size: 150 × 150 × 5 mm – 0.25 kg - Maximum item size: 600 × 400 × 400 mm – 35 kg - Item discharge left and right CHUTES: - 155 chutes + 1 reject lane - Chute equipment: (Saturation indicator light stacks [1/10 chutes], PTL displays, motorized chutes with automatic diverter + idle rollers, multiple fill level sensors, and a saturation sensor) INDUCTIONS: - 4 hybrid induction stations, total capacity 2,400 items/hour each - Automatic item feeding on belts - 36 PTL sort destinations per induction DWS: - Dimensioning - Automatic barcode reading - Dynamic weighing SUPPORTED ITEM TYPES: - Plastic trays - Cartons - Soft parcels (pouches, envelopes, polybags) KEY BENEFITS: - Low energy consumption - Simplified maintenance - WMS / WCS compatibility Giedpfx Aaox Sw Rqe Aer - Dual-sided sorting (left/right) - >99% sorting accuracy - Quiet operation (

Year of construction: 2022, operating hours: 3,863 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 006682, On behalf of our customer, we hereby offer a virtually new OI sorting. This installation can be tested in operation at the customer. The machines consist of; Sorting oi: 0050 Bunker belt with dosing drum BDF1200/2000*10000 0060 Ascending belt to screen HBT1200/1600*14000 0070 Cardboard screen 1640*7000 Platform Godpfewq D Dnox Aa Aeir Cage ladder 0080 Adjustments to existing paper chain belt 0090 Switch cabinet included Operating hours only 3863 In consultation with the customer and Bollegraaf, a guarantee is possible under certain conditions See the attached PDF for a precise technical description per machine

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Gsdoxw Rdlopfx Aa Aoir Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: excellent (used), Year of construction: 2013, - Capacity: 10 - 17 to/h - Height-adjustable feet: 500 - 1050 mm - Machine only very little used Giodeq Uk N Sjpfx Aa Aor - In very good condition

Condition: used, functionality: fully functional, Automated Assembly Fixture for Filter Inserts – Suitable for Arburg Injection Molding Machines For sale is a complete assembly fixture that was previously mounted on an Arburg injection molding machine. The unit was used to precisely and automatically insert filters into plastic components. It features a modular design, making it suitable for integration into existing production lines or as a foundation for new automation projects. Features & Components - Sturdy frame constructed from aluminum item profiles Robust, modularly extendable, and easily adaptable - Siemens control unit Industry-grade PLC for reliable, repeatable processes - Festo valves & pneumatic cylinders Multiple cylinders and solenoid valves, neatly installed and easily accessible Godsx Sqkkopfx Aa Ajir - Integrated conveyor belt for removal or onward transfer of finished parts - Protective enclosure & safety components Partially glazed panels, safety doors, emergency stop button - Complete electrical & pneumatic systems Control cabinets, sensor cabling, pneumatic distribution Condition The unit is used but technically complete. It was last in productive operation before being dismantled and stored dry. Some cables are loose or need to be re-organized. Ideal as a retrofit project or for plant engineers, prototyping, or special-purpose machinery construction. Fields of Application - Filter assembly - Automated placement processes - Pick-and-place applications - Handling on injection molding machines - Special-purpose machine construction / automation technology The control unit is fully functional. No documentation is available.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Giedpfxexf Urps Aa Ajr Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts. Gjdpfxeux Shvs Aa Aoir