Used Spectrum Analyzer for sale (204)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 10000987991, overall weight: 5,110 kg, load capacity: 6,300 kg, main lifting speed: 4,000 mm/min, lifting height: 5,200 mm, 6.3t S-DG Double-Girder Overhead Crane TECHNICAL DETAILS Crane rail type: 60 × 40 Load capacity: 6,300 kg Span: 17.100 m Maximum deflection of crane bridge at rated load: 22.8 mm Wire Rope Hoist Max. lifting capacity of hoist 1: 6,300 kg Hoist classification: 1.2 + 1.2 m (D_min) Lifting height: min. 4.9 m / max. 5.20 m Type of trolley: double rail trolley Wire rope control: with hook drift Hook type/size: RSN2.5V Speeds Hoisting speed at rated load: min. 0.08 m/min to max. 4.0 m/min CSR speed at partial load: max. 6.00 m/min Trolley travel speed: max. 20 m/min Crane travel speed: max. 40 m/min MACHINE DETAILS Weight of crane including hoist: 5,110 kg Electrical Data Supply voltage: 3 Ph / 400 V / 50 Hz Control voltage: 48 V Area of application: indoors Ambient temperature: min. 5 °C to max. 40 °C Motor Power Main hoist motor: 4.5 kW Duty cycle main hoist motor: 60% ED Trolley travel motor: 1 × 0.45 kW Duty cycle trolley travel motor: 40% ED Crane travel motors: 2 × 0.65 kW Duty cycle crane travel motors: 40% ED EQUIPMENT DynADrive inverter control Control Pro Performance Gjdpfex Nvlbex Ahdeiu 4-stage hoist limit switch Hoist brake Wire rope drum Gearbox Overload protection Load spectrum recorder Slow/stop limit switches for trolley and crane travel Crane equipped with REMOX516MI radio remote control Includes signal horn (sound level 98 dB) Includes spare transmitter for radio remote control Includes storage cabinet for remote control Rope angle features Safety festoon line approx. 30 m long, along central support row Includes mains disconnect switch and power feed at any point Rising main (fixed installed cable) to be provided by customer Note: Further technical details can be found in the attached quotation.

Year of construction: 2014, condition: good (used), Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in hematology to optimize reagent logistics in laboratories. The unit is manufactured by RR Mechatronics and is often used in combination with hematology analyzers from Sysmex. Purpose and Function The RPU-2100R (Reagent Production Unit) is used to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a standalone unit with all components housed in a single, enclosed enclosure. The enclosure features removable, epoxy-coated metal covers. All external connections and the ON/OFF switch are located on the rear of the unit. All user-serviceable and replaceable components are accessible via the front door. The cart for the Cellpack concentrate (e.g., Cellpack®-S Conc.) can be attached to any three sides of the unit. Features and Capacities The RPU-2100R focuses on optimizing reagent management for high-throughput laboratories: Reagent Concentrates: Uses Cellpack S Conc. in 10L and 20L containers. Throughput per Concentrate: Up to 8,250 complete blood counts per month can be performed with a 10L container without reagent changes. Up to 16,500 complete blood counts per month are possible with a 20L container. Shelf Life: Once opened, the reconstituted reagent has a shelf life of 30 days. Manufacturer: RR Mechatronics Model: RPU-2100R Catalog Number: NARP109010 External Connections Power Supply, Euro Plug Ethernet/USB (NARP109010 only) RJ45/USB-B RS-232 (NARP109000 only) 9-Pin SUB D Connector External Connections (Liquids) Water Connection: G ¾" Thread Reagent Dispensing Connections (4x) Push-in Hose Connection, 6 mm Outer Diameter Waste Connection (1x) Hose Barb, 12 mm Inner Diameter Reagent Concentrate Maximum Dimensions: 390 x 260 x 300 mm (W x D x H) Reagent: SYSMEX Cellpack Concentrate Peak Reagent Dispensing Rate: 0.5 Liters/Minute for 6 Minutes max. (at (with full reservoir and overflow tank and new pre-filter) 1 liter/minute, 2 minutes max. Filtration: Air filter, bacteria filter, pore size 0.2 µm Godsyk U Dwspfx Ahdoiu Liquid pre-filter: Particle filter (sterilized), pore size 0.8+0.45 µm, self-venting Liquid final filter: Bacteria filter (sterilized), pore size 0.2 µm, self-venting System dimensions: Width: 500 mm Height: 700 mm Depth: 430 mm Weight: approx. 50 kg Water tank volume: 2.5 liters Reservoir: 2.5 liters Mixing tank: 0.6 liters Overflow tank: 0.6 liters Language selection available: German, English, Spanish, French, Hungarian, Italian, Dutch, Swedish Swedish (spreadable) Voltage: 230 VAC (+/- 10%) Frequency: 50-60 Hz Year of manufacture: 2014 Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Width 29.7 in. Godpfxexzgw As Ahdsiu

Condition: good (used), Helmut Fischer XDL-XYmZ X-ray Fluorescence Analyzer For sale is a professional X-ray fluorescence (XRF) analyzer from Helmut Fischer GmbH + Co, model XDL-XYmZ. Power: 120 W Voltage: 230 V / 50–60 Hz Model number: XDL-XYmZ Made in Germany This analyzer is ideal for precise material analysis in laboratories, quality control, and industrial environments. Condition: Used (see pictures). Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. Financing through our bank is also possible. komplett-konzept.leasingo.de Gjdpfxsxltm Eo Ahdsiu You can find more items – new and used – in our shop! International shipping costs upon request!

Year of construction: 1997, condition: used, Band Slicing Machine This conveyor slicer with an extended infeed belt is specifically designed for slicing vegetables and fruit. Thanks to a wide range of interchangeable cutting tools, the machine is capable of producing slices, strips, and cubes. Special knives are also available for shredding pulled meat. It is highly versatile and suitable for slicing salad, leafy and non-leafy vegetables, fruit, herbs, meat, fish, sausage, bread, cheese, nuts, and more. It is ideal for commercial kitchens, catering operations, fresh produce retailers, and industrial food processing applications. Numerous cutting accessories are available, allowing adaptation to a broad spectrum of uses. The user-friendly control panel enables fast and easy product changeovers. Gedpfx Ahjx Hvcusdeiu Both the conveyor belt speed and blade rotation speed are continuously adjustable (frequency-controlled), ensuring precise and gentle cutting even of sensitive products. The machine is constructed entirely from stainless steel for maximum hygiene and durability.

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Gjdpfx Ahovu Syysdjiu Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: like new (used), CHEREAU REFRIGERATED SEMITRAILER THERMOKING SLXi SPECTRUM REFRIGERATION UNIT BRAND NEW FROM FACTORY INTERNAL PARTITION DUAL TEMPERATURE COMPARTMENT 3 AXLES, FIRST AXLE LIFTABLE 6 ALLOY WHEELS 6 MICHELIN 385/65 R 22.5 TYRES PALLET BOX, PVC TOOLBOX Gisdpfx Asxgizbehdsu POSSIBILITY OF CUSTOMIZED FINANCING OR LEASING ON SITE. FROM 24 UP TO 96 INSTALMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES HQ DOMENICO ESPOSITO S.P.A. EBOLI (SA) BRANCH – OFFICIAL DEALER FOR MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL, AND MAXUS CONTACTS: 0823 1686306 335 6713062 OFFICE HOURS: MONDAY-FRIDAY 08:30/19:00 – SATURDAY 08:30/14:00 Domenico Truck srl accepts no responsibility for any discrepancies in equipment, options, or specifications which may differ from those reported in the description. Please verify the features of the specific vehicle.

Condition: used, For inquiries regarding the vibratory plate, Mr. Herden will be happy to assist you (by phone). Weber CR 9 WSA Hatz Diesel Vibratory Plate Compactor / Electric Start / New unit / In stock & immediately available Sales price: €12,290.00 net / €14,625.10 gross 3-year manufacturer warranty Technical specifications Engine: Hatz Diesel Max. engine power: 10.5 (14.3) kW/hp Weight: 743 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm Weber Smart Assist (WSA) - Analyzes signals from the machine’s integrated sensors and displays them graphically using symbols - Similar to the previous Weber MT engine protection, the engine automatically shuts down if continued operation would risk engine damage - Error symbols guide the operator step-by-step in troubleshooting - For an excessively dirty air filter, the cleaning and replacement process is shown step-by-step - Weber Smart Assist also includes the COMPATROL compaction control system, now in a new design - Displays compaction progress on an easy-to-read bar graph - New machine operation: after starting, vibration is activated at the push of a button - There is no throttle lever, as the engine speed is regulated automatically The reversible soil compactors of the CR series impress with strong compaction performance and maximum efficiency. They are first choice for classic road and civil engineering as well as paving applications. Well-balanced running characteristics, high stability, and low hand-arm vibration ensure outstanding operator comfort. CR 9 – Efficient machine with powerful compaction performance: - Infinitely variable forward and reverse travel. Hydraulic direction change - Throttle cable and hydraulic changeover are safely routed inside the guide bar - Low hand-arm vibration - Fatigue-free operation thanks to height-adjustable guide handle - Protection of machine and engine by engine protection frame and motor cover - Reduced maintenance due to self-tensioning centrifugal clutch - Easy servicing, with all maintenance components readily accessible - Safe and fast loading thanks to large, foldable lifting eye - Secure lashing during transport thanks to additional lashing points on the engine console - Greater operator convenience via electric start - Application areas: road and civil engineering, paving, and—thanks to the low overall height and working width—the CR 9 is also ideal for trench shoring We have a large selection of various vibratory plates in stock for immediate delivery! Mr. Herden (phone) will be happy to assist you. Gijdjyi Rzpepfx Ahdeu We will gladly provide you with a financing offer upon request. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are...

Condition: like new (used), Year of construction: 2010, machine/vehicle number: 1099883, operating hours: 100 h, Demag end carriage pair End carriage DRS315 Hoist unit EZ DR20 Trolley gauge 2240 mm Godpfx Aew H S Avehdsiu Reeving 4/1 The crane shows virtually no wear, very little use in a machine construction factory. Dismantled in July 25 and stored dry. Complete with documentation and HBC Spectrum radio remote control. All motions with frequency inverter! Modifications can be offered separately.

Condition: ready for operation (used), Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible. Gijdpfxsx El Ans Ahdou

Year of construction: 2020, condition: ready for operation (used), A color measurement device Datacolor is available. Measurement geometry: d/8°, illumination system: Dual, integrating sphere diameter: 152mm, wavelength range: 360nm-700nm, wavelength resolution: 2nm, measurement interval: 10nm, photometric range: 0%-200%, spectral analyzer: SP2000. Machine dimensions X/Y/Z: approx. 320mm/340mm/420mm, weight: approx. 17kg. Documentation available. An on-site inspection is possible. Gijdpfxjxg Riyj Ahdju

Condition: good (used), functionality: fully functional, Year of construction: 2003, The system was used for sorting frozen fruit to remove foreign objects. For further detailed technical information, please refer to the PDF. Subsequently, weighing and packaging into tubular bags is carried out. Process sequence: Transport via inclined conveyor to the vibrating table for singulation of the fruits. Then to the BEST Laser System LS 9000, which detects foreign objects and ejects them using approximately 80 air nozzles. The laser can be reprogrammed by running so-called good products (i.e., defect-free goods) through the machine. By analyzing a point cloud of the surface structure, the laser learns what constitutes good or bad products. Gijdpfx Ajwrdfuohdju Afterwards, the product passes over a conveyor belt with a metal detector and visual inspection. Then again via an inclined conveyor for weighing and filling into tubular bags, with a maximum bag weight of 30 kg. The tubular bagging machine is also manufactured by Vollenda. Complete documentation is available. Additional technical data can be found in the PDF documents (original invoices). Original price of the system was €382,000; few operating hours.

Year of construction: 2024, condition: new, functionality: fully functional, With the V.0102-gn, FOBA offers a marking laser in the green spectrum (532 nm wavelength) with low heat exposure. Thanks to 10 watts of laser power, markings can be applied with outstanding speed and contrast sharpness on surfaces that cannot be sufficiently marked with other wavelengths. This includes many white and transparent plastics, highly reflective metals and material combinations. Even red or orange plastic surfaces, which often offer poor contrast due to their color properties, receive perfectly legible codes and characters. The marking quality is also impressive on special plastics such as UHMWPE, HDPE and PMMA. In most cases, the green lasers also make laser additives superfluous. The FOBA V.0102-gn marking laser closes the gap between UV (355 nm) and fiber (1064 nm) laser systems and thus addresses the most challenging marking applications. Gisdjt Etkkepfx Ahdou The V.0102-gn is used in automotive and aircraft construction, as well as in medical technology, electronics, extrusion, but also in the marking of sensitive materials such as ceramics, flame-retardant plastics, plastics and materials for invasive purposes.

Year of construction: 2004, condition: ready for operation (used), Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021. Godpfxjhix Uks Ahdoiu

Condition: excellent (used), Very well maintained blood analyzer type Reflotron IV of the world brand Roche, wave range: 567-951 nm. The device has a printer interface and connection for keyboard, and is supplied with the accessories shown. All devices were manufactured in Germany and used very little by federal companies, condition is optically and technically flawless. The following measurements can be carried out with the Reflotron system: - Glucose - cholesterol - triglycerides - HDL cholesterol - GPT (ALAT) - GOT (ASAT) - GGT (gamma-GT) - creatinine - urea - uric acid - Potassium - Alkaline phosphatase - Hemoglobin - Bilirubin - Creatine kinase (CK) Gjdpfoq Stvujx Ahdoiu - Amylase - Pancreatic amylase Scope of delivery: - Reflotron IV blood analyzer - Rack for accessories - Pipette for Reglotron IV - Applicator - Power supply unit - Manual German, English All components are in very good optical and technical condition and can be used immediately. Some discoloration on the housing is due to storage and does not limit the usability of the system in any way - see pictures. The system shown is for illustrative purposes only, all systems offered are in comparable condition. The sale is aimed exclusively at traders, you will of course receive an invoice with VAT shown. Private buyers have the opportunity to purchase the device "on behalf of a customer", a direct commercial sale to private individuals expressly does not take place! For professional use, the tests prescribed by the respective national law, such as STK / MTK, must be carried out. The goods are sold under exclusion of any warranty or liability for material defects. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health. If you have any queries, please contact us directly using the contact details provided.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. Giodoykq T Uopfx Ahdju The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. Gedpfxoykq D Hs Ahdjiu The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Gedpfx Aexzuiaohdeiu

Condition: good (used), functionality: limited functionality, empty load weight: 9,000 kg, maximum load weight: 11,000 kg, overall weight: 20,000 kg, axle configuration: 1 axle, first registration: 06/2013, loading space length: 10,800 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, suspension: air, tire size: 315.80 r 22.5, color: white, Year of construction: 2013, Equipment: ABS, cooling unit, tail-lift, sem frigo omar with atp zanelli standard van, atp in frc valid until 31.07.2025, side doors, rear shutter, internal bulkhead for dual temperature, powder floor, 30 q.li dhollandia retractable rear loading tailgate, Thermo King SLX Spectrum refrigeration unit, internal fan, year 2013, single disc steering tridec axle, NB: the fridge requires a thermo regulator and display, INTERDRIVE SRL-PARMA DEALER Giodovlx Sdepfx Ahdou

Condition: good (used), functionality: fully functional, The machine consists of: Gijdpfx Ahovnri Iedou 1. Loading conveyor belt for the sheet to be joined - Dimensions: 3200 x 2000 - Power: 2 kW 2. Lifting table - Dimensions: 3200 x 2000 - Capacity: 5000 kg - Power: 4 kW 3. Conveyor belt for loading empty pallets - Dimensions: 3200 x 2000 - Power: 2 kW 4. Empty loader for the sheet to be optimized VTSA 3800 - Length: 3200 - Feeding speed: 55 m/min - Power: 5 kW 5. Roller feeder VTSM 3800 - Length: 3200 - Power: 1.5 kW 6. Angle transmission with rollers and belts KS4 - 5400 - Length: 3200 - Width: 2000 - Power: 2+2 kW 7. Conveyor belt for aligning sheets on the side edge PKP - Length: 3000 - Power: 4 kW 8. Conveyor belt with chains for pinching the sheet - Length: 2000 - Power: 5.5 kW 9. Camera for reading the material to be optimized OK P - Analyzes the sheet and sends the cutting commands (head cut, tail cut, hole cut, etc., according to the parameters set by the operator) - Sheet thickness control unit 10. Pasta cutting unit - Hydraulic control 11. Group for selecting waste material (it is inserted in a belt below) 12. Splicing group with thermo-fuse wire - Number of splicing wires: 6 13. Cutter for cutting the joined sheets to size - Hydraulic control 14. Stacker for unloading the joined sheets - Length: 3200 - Width: 2000 - Power: 3 kW 15. Lift table - Length: 3200 - Width: 2000 - Load: 5000 kg - Power: 4 kW 16. Conveyor belt for unloading pallets - Length: 3200 - Width: 2000 - Power: 2 kW 17. Conveyor belt for loading empty pallets - Length: 3200 - Width: 2000 - Power: 2 kW 18. Evacuation belt for cutting waste - Power: 4 kW 19. Mechanical cutter for shredding waste

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Gisdpfx Ajwhbnlshdeu

Year of construction: 2025, condition: new, Autonomous RS1 and modular RS2 containers in the CompoFlow system represent the latest solutions for the biological processing of organic waste. Designed for mobile and decentralized biowaste collection (RS1), as well as stationary operation at composting facilities (RS2). Perfect for ensuring a controlled process of composting, biodrying, and biostabilization, along with efficient organic waste logistics. Each composting system is tailored to the individual needs of the client. After analyzing the material intended for processing, we specify the required number of containers and the necessary composting capacity. Gisdpfxsikq Eyo Ahdsu Made in Poland – Eco-friendly – Durable – Certified – EU compliant Composting significantly increases recycling rates. RS TEAMTECH Sp. z o.o.

Condition: like new (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 580 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, rotational speed (max.): 4,000 rpm, controller model: Contour 1, NC Milling Machine Deckel FP4A We are offering for sale a perfectly maintained Deckel FP4A CNC milling machine (very low operating hours, in as-new condition)! Technical Details: - Travel (X): 580 mm - Travel (Y): 400 mm - Travel (Z): 450 mm (390 mm*) - Table size: 460 x 800 mm - Spindle speed range: 40 – 4000 rpm - Feed rate: 2 – 3600 mm/min - Rapid traverse: 4.0 m/min - Spindle taper: SK 40 - Machine dimensions (LxWxH): approx. 3.0 x 2.10 x 2.10 m - Spindle drive power: 4.0 kW - Control: Contour 1 Description: Giedjxzpwfepfx Ahdeu CNC-controlled tool milling machine, equipped with Contour 2 control. Features include a vertical head rotatable +/- 90° with quill travel of 80 mm, horizontal spindle, power feeds & rapid traverse on all 3 axes, hydraulic tool clamping, flying desk, electronic handwheel, automatic central lubrication, coolant system, safety emergency stop, chip tray, and separate electrical cabinet. The machine is in top working condition. Note: This additional information is standard for this model. Please always verify the exact configuration during inspection. The DECKEL FP4A Universal Tool Milling Machine, built in 1985, is a classic and highly versatile metalworking machine renowned for its precision and flexibility – testament to Deckel’s strong tradition of engineering quality. The FP4A features a robust bed-type construction, delivering the necessary stability for precise milling tasks. Its universal tool milling head is a highlight, enabling a wide spectrum of operations—from basic drilling to complex contouring and profiling. This versatility makes it a valuable asset in tool and die manufacturing, as well as mold making. Key technical features of the 1985 DECKEL FP4A include a generously sized worktable, infinitely variable spindle speed adjustment, and an intuitive control interface for efficient programming and machine operation. The advanced CNC technology contributes to exceptional accuracy and operator convenience. Despite its age, the DECKEL FP4A continues to be a trusted solution for applications requiring flexible tool milling. Its reputation for reliability and precision makes it an essential tool for modern metalworking and manufacturing operations. Deckel’s legacy of quality and innovation in the field of metal machining is clearly evident in this model.

Condition: used, functionality: fully functional, Agilent 6510 System + PC & Software. The set includes: -Agilent 6510 Q-TOF LC/MS -Agilent 1260 Infinity G1376A Capillary Pump Giodpfx Ast T T Tnshdju -Agilent 1200 Series G1377A Micro Well Plate Autosampler -Agilent 1200 Series G1379B Micro Vacuum HPLC Degasser -PC & Software The Agilent 6510 Quadrupole Time-of-Flight LC/MS delivers unsurpassed Q-TOF sensitivity in a compact, bench-top design. With the 6510’s tenfold sensitivity advantage, you detect critical, low-level components that are out of reach of other Q-TOF instruments. At the same time, fast data acquisition means you can acquire one MS and five MS/MS spectra per second, for higher-quality data and more structural information from complex samples. And ultralow-ppm mass accuracy maximizes confidence in your results. Features: -Attomole-level sensitivity – Sensitivity unequaled by any Q-TOF on the market today enables the 6510 to detect more low-abundance components. -Better than 3-ppm mass accuracy – Outstanding mass accuracy, typically 1-2 ppm, rivals FTMS instruments and increases specificity and confidence in results. -Wide in-spectrum dynamic range – 3-4 orders of magnitude in-spectrum dynamic range enables identification of less-abundant compounds in the presence of more-abundant compounds and makes overall operation easier. -Fast MS and MS/MS acquisition – Fast spectral acquisition improves the identification of unresolved components in complex samples and makes the 6510 compatible with the latest fast chromatography. -Multiple ion source options- The best selection of ion sources in the LC/MS industry-including the revolutionary HPLC-Chip/MS and multimode ESI/APCI sources-allow the 6510 Q-TOF to address a wide range of LC/MS applications Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Agilent 7500 Series G3155A Inductively Coupled Plasma Mass Spectrometer. The Agilent 7500 ICP/MS (Inductively Coupled Plasma Mass Spectrometer) is a cutting-edge analytical instrument known for its exceptional sensitivity and performance. With detection limits that go down to parts per trillion for most elements, the 7500 ICP/MS offers unparalleled sensitivity, enabling the accurate quantification of trace elements in various sample matrices. The instrument's wide dynamic range spans from sub-ppt to high ppm levels, accommodating diverse sample concentrations without compromising accuracy or precision. Capable of analyzing up to hundreds of samples per day, the 7500 ICP/MS provides rapid throughput, facilitating high-volume sample analysis in research, environmental monitoring, and industrial applications. Featuring robust interference removal capabilities and excellent stability, the instrument delivers highly accurate and precise quantitative results, ensuring confidence in analytical measurements. The Agilent 7500 ICP/MS is compatible with various sample introduction systems, including autosamplers and chromatographic interfaces, allowing for the analysis of complex sample matrices such as biological fluids, environmental samples, and geological materials. The Agilent 7500 ICP/MS is the instrument of choice for laboratories and research facilities requiring sensitive, fast, and quantifiable elemental analysis across a wide range of applications, including environmental monitoring, geochemistry, pharmaceutical analysis, and materials science. Gedpfouaxzisx Ahdsiu Good working condition. Please check out our other listings as well.