Used Spot Welder for sale (2,118)

Condition: used, Year of construction: 1985, pressure 100 t distance between columns 1250 mm stroke 1035 mm table surface area 890 x 1280 mm distance table/ram, max. stroke up, adjustment up 1035 mm table height over floor 630 mm ram surface 1000 x 1200 mm side window 700 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 3,8 x 3,9 m Cedpfx Afsvuumconsgn with swivelling ram, movable table, inclining table, ejector in table, hydraulic ram interlocking press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1985, pressure 200 t table length 1500 mm table width 1200 mm Distance between columns 1250 mm Stroke 1150 mm Table surface area 1200 x 1500 mm Distance table/ram, stroke up 1475 mm Table height above floor 638 mm Ram surface 1200 x 1500 mm Weight 16,0 t Dimensions (WxDxH) 2,2 x 4,52 x 4,6 m Cedpevuul Esfx Afnogn with pivoting ram, moving and tiltable table, ejector in table, ram interlocking via toothed bar, injection unit in ram

Condition: new, Year of construction: 2024, Year of production: 2024 Model: R1550 Serial number: V00324 Max demand: 12KW Rated voltage: 220V/50HZ/1 PHASES Cgsdpfx Afovbbn Hjnon Max current: 32A

Condition: excellent (used), Angle welding machine Make: Meurer Model: CM/W3 Year of manufacture: 2002 Welding frame: 460 x 700 mm 220 volts Cgsdpfxex Tpf Ne Afnen Length: 1950 mm Depth: 770 mm Packing table height: 870 mm

Condition: excellent (used), Surface plate Space requirement : Width 600 mm Csdog Af U Eopfx Afnegn depth 500 mm Height 90 mm

Condition: new, current intensivity 200 A capacity at 100% load 150 A 230 V weight of the machine ca. 9,0 t dimensions of the machine ca. 0,46 x 0,15 x 0,32 m TIG welding system - New - 3m hose package Cedpfx Aowrzrxjfnogn - Additional 8m hose package - Ground cable - Gas connection hose - Documentation

Condition: new, machine/vehicle number: DF0178, pressure:500 t table length:3500 mm table width:3500 mm stroke max.:3600 mm dimensions:8500 x 3700 x 8500 mm return capacity:50 t weight:250 t Fold-down upper tool:180 Grad :max. 33 mm/sec table extendable:3800 mm :33 mm/sec table load:100 t power capacity:65 kW voltage:400 V control voltage:24 kW frequency:50 Hz work speed:0 - 10 mm/sec. pre-running speed:0 - 10 mm/sec return speed:0 - 25 mm/sec :0 - 10 mm/sec :800 l Ram Height:1300 mm table height:700 mm :inklusiv ? Cgjdpjfxyh Uefx Afnjn :inklusiv ? :inklusiv ? :inklusiv ?

Condition: used, Year of construction: 1998, PERFORMANCE AND DESIGN: Press Capacity: 26-100 t (adjustable) Return Force max: 45 t Table: 1100 x 800 mm Maximum Table Load: 5,000 kg Distance - Ram to Lower Table (max): 950 mm Frame Type: 4-column Overall Dimensions (WxDxH): 2,100 x 3,395 x 3,670 mm Approx. Total Weight: 8,500 kg T-slots and bores to DIN-650-22 mm HYDRAULIC UNIT: Hydraulic Pump (Brand: REXROTH): SYDFE11x71RN0030CAM Motor Power: 7.5 kW Max. Working Pressure: 200 bar Pressure Accuracy During Ram Stroke: +/- 5 bar Oil Tank Volume: 200 L Hydraulic Oil Specification: HLP 36 ELECTRICAL EQUIPMENT ELECTRICAL CONNECTION:  Main Supply: 400V AC  Control Voltage: 24V DC  Frequency: 50 Hz  Hydraulic Main Motor Connection: 7.5 kW  Total Connected Load: 10 kW FEATURES • 180° tiltable ram plate up to 3 tons (tilted) • Ejector in ram: 3.5 tons and 130 mm, adjustable • Oil connection sockets for core pull • Digital measuring device • Material feed (injection molding) via the ram plate possible • Increased speed • Table plate tiltable to both sides DOCUMENTATION • Hydraulic schematic • Electrical schematic • Technical drawing • Datasheet FUNCTIONS AND DESCRIPTIONS PRESS CONTROL: The press is operated via the operator console. • Raising/lowering the ram plate • Tilting the ram plate • Extending the table • Operating the ejector • Setting the pressing force • Operating oil connection/core pull The control system is by Siemens Pilz. All essential functions and data are entered and displayed there. (used try-out press, 100t press, Reis hydraulic press, 4-column press, die shop press, forming press, injection molding press, used machine, industrial machine, hydraulic press, tool testing press) Looking for the perfect machine? Csdpfxjxd Tiqo Afnjgn Contact us for a custom offer. Our hydraulic presses are manufactured in accordance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety regulation NR 12, which builds upon these standards. Our key strengths are special-purpose machine construction and press automation. We offer tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly attractive prices. Primarily, hydraulic components from leading European manufacturers are used in our presses.

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Cgjdpfxjulwzmo Afnsn Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 1996, condition: good (used), PTW 150 Complete orbital tube welding machine with two complete and fully overhauled welding heads, (and 2 extra fully operational welding heads, respectively for up to 2" and 4") (see pictures) for sale. It includes "collets" (clamping sleeves) for most pipe dimensions from ½" to 4". This equipment is one of 5 orbital welding machines I have had, and it has mainly been used on 54x2mm, in addition to building 5-6 central gas systems with tubes of 12-18 and 28mm, and some 88.9mm. The equipment is complete, ready to weld with cables, gas hoses, red. valve etc. The equipment is delivered in original transport boxes, has complete set of manuals/part lists. Buyers can have the equipment delivered to their door, and up to 1 week of free training (including with many years of experience!) anywhere in Europe! New orbital equipment with the same spec, would cost typical some €40k + with just ONE weldhead. (One enclosed weldhead is typical €12-13000 without collets, typical €300 /dimension you will weld) At the two plants in Norway that operated with nuclear power (Kjeller and Halden), the same type of welding machine was the only one that was able to weld according to the requirements they set! (like 100% Helium, - 200 bar, - vaccum etc) The user interface is simpler on newer machines, but if you can calculate the circumference of a tube, you are well off. If you are wondering if orbital welding is something for you, it involves very little risk when you can get complete equipment, delivered on your door step, welding program for all pipe dimensions from ½" to 4" and one week of training for €10k, (and in addition 3 decades of experience) Cgsdpeycwk Refx Afnjn

Condition: good (used), nominal power at 50% duty cycle: 50 kVA, - Power 50 kVA - Pneumatic - Throat depth 425 mm Codpjyda Dvefx Afnsgn - PX 1500 Plus control - 400V

Condition: used, Year of construction: 1988, pressure 70 t distance between columns 750 mm stroke 900 mm table surface area 700 x 1000 mm Distance table/ram, stroke up 900 mm table height over floor 680 mm ram surface 700 x 1000 mm side window 600 mm max. tool weight 5,0 t max. capacity of swivelling ram plate 2,0 t Speed down 0 - 50 mm/s Speed up 0 - 48 mm/s Working speed 0 - 8 mm/s oil volume 140 l power capacity 9,5 kW weight 8,0 t Dimensions (WxDxH) 2,2 x 1,2 x 3,7 m with swivelling ram, movable table, ejector in table Cgjdsvuumpepfx Afnon can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1991, pressure 40 t distance between columns 930 mm stroke 1100 mm distance table/ram, max. stroke up, adjustment up 1035 mm table surface area 900 x 1280 mm table height over floor 665 mm ram surface 900 x 1200 mm side window 700 mm max. tool weight 7,0 t max. capacity of swivelling ram plate 3,5 t Speed down 0 - 50 mm/s Speed up 0 - 34 mm/s Cedpfx Afevuul Sonogn Working speed 0 - 10 mm/s oil volume 140 l power requirement 9,5 kW weight 7,0 t dimensions (WxDxH) 2,1 x 3,6 x 3,6 m with swivelling ram, movable table can be offered without or with putting into operation in given condition - video at seller'S site before dismantling available

Condition: used, Year of construction: 1987, pressure 400 t table length 2500 mm table width 2000 mm Distance between columns 2000 mm Stroke 2600 mm Distance table/ram, stroke up 2500 mm Table surface area 2000 x 2500 mm Table height above floor 1120 mm Ram surface 2000 x 2500 mm Side window 1500 mm max. capacity of swivelling ram plate 20 t Oil volume 1000 l Power capacity 48,0 kW Weight 85,0 t Dimensions (WxDxH) 8,6 x 5,3 x 8,2 m with swivelling ram, movable table, inclining table, ejector in table Cgsdpevuumiofx Afnon stored in dismantled condition - Video at seller's site before dismantling available

Condition: used, Year of construction: 1999, serial number 97665 welding power 280 kVA Baunorm EN: 60974-1 / EN Brenner / Schlauchpaket Cgodpfx Aouxfzpjfnsn

Condition: used, Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Csdpfx Afevuz N Rensgn Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch

Condition: used, Spot welding device, spot welding machine, spot welding system, spot welding gun Codpfx Afjfnqhpsnjgn -Manufacturer: Dalex, spot welding machine type A11.1 -Voltage: 380 V. -Transport dimensions: 230/270/H205 mm -Weight: 20 kg

Year of construction: 1985, condition: used, Spot welder, spot welding machine, spot welding machine, spot welding tongs Cgjdpfx Afok Aubxonon -Manufacturer: Tecna, spot welding machine: Type4161 -Rated power: 31 kVA -Operation: by foot pedal -Dimensions: 780/250/H1500 mm -Weight: about 130 kg

Year of construction: 1976, condition: used, Spot welder, spot welder, spot welder, spot welder -Stationary Cgjdpfx Aoc N Uabjfnsn -Operation by hand switch -Arm length welding machine: 350 mm -Welding gun type: -Control -Dimensions machine: 1500/1000/H1670 mm -Weight machine: 774 kg -Dimensions control cabinet: 1550/420/H1960 mm -Weight control cabinet: 330 kg

Condition: used, Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar Csdpfofbyc Dox Afnogn -Spotting ruler: 60° -Ruler length: 2015 mm -Dimensions: 2275/120/H105 mm -Weight: 90 kg

Condition: used, throat depth: 420 mm, nominal power at 50% duty cycle: 60 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot welding machine type 8003 TECNA – for welding nuts and sheet metal – completely overhauled and inspected Rated voltage: 400V Rated power: 60kVA at 50% duty cycle Short-circuit current: 22kA Welding current: 17.6kA Fuse protection: 125A Throat depth: 420mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 80mm Double stroke: 60mm Electrode taper MK2 – new electrode holder New 2-stage foot switch according to UVV All pneumatic and water hoses renewed Weight approx. 330kg - TE 180 with digital display of welding current, current rise, etc. - Main switch at control cabinet - Original documentation / operating manual available - Machine inspection with confirmation 02/2026 Demonstration and inspection by appointment, Commissioning and training at customer’s site available for an additional charge The unit is located in Dresden, near A17 A suitable cooling unit is always in stock – available at an additional cost ;-) Cgedpfx Ash N Sd Uefnjn

Condition: used, - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Electrode force: 17 - 278 daN Cgsdsydrbmspfx Afnen - Weight: approx. 240 kg

Condition: used, - Type PL 40-2 - Rated power at 50% duty cycle: 40 kVA - Max. welding power: 118 kVA - Electrode force: 65 - 390 daN - Weight: approx. 315 kg - Cooling water quantity: 4 l Cgedpfsydracex Afnsn

Condition: good (used), Year of construction: 2009, machine/vehicle number: 20080229, This is a C-frame welding station Type: 130 MF Machine-No.: 20080229 YEAR OF MANUFACTURE: 2009 U1N: 400V / 50HZ U20: -9V level 1 S1: 58kVA I2p 6.46kA ED 100% Codpfx Ajvgdt Asfnogn S%: 130 kVA ED 20% Fmax: 1140daN at 6 bar I20c: 42.5 kA Q: 18L/min Opening: up to 170mm Projection: 350mm Control cabinet: Machine no.: 20100079

Condition: good (used), functionality: fully functional, machine/vehicle number: 940329, type of cooling: water, This is a NIMAK PMP 6-2 / 100 spot welding machine. TYPE: PMP 6-2/100 Cgjdpfx Afovbgxqensn MACHINE NO.: 940329 Dqm: 72N U1N: 400V 1~ 50 HZ Sn 50% ED: 100kVA S max: 318 kVA I20c : 48 kA U20 from 5.8 V to 8.3V in 2 steps Clamp opening: 240mm - 500mm Outl. l: 350mm Fmax: 1100 daN at 6 bar Cooling water 10L/min