Used Star Ecas 20 for sale (117)

Condition: good (used), Year of construction: 2000, functionality: fully functional, Controller Fanuc 18i-T NC controlled axes 6 Original Japan With barfeeder FMB mini turbo 2-16 / 3200 A For 3 m bars Max. turning dia 16 mm Dkjdpfjxvbbfox Affek Max. drilling capacity 7 mm Max. tapping capacity M6 Rapid feed in X/Y/Z/ZB = 20/20/20 m/min Rapid feed in A = 78,5 m/min Feedrate in X/Y/Z/ZB = 10/10/10 m/min Feedrate A = 10 m/min Main spindle speed 500 - 12000 rpm Main spindle power 100/40% ED/Power 2,2 kW Outer tool places 6 Driven tool places 3 Rear side operation Max. turning dia D16 mm Max. part length 85 mm Sub spindle speed 500 - 8000 rpm Sub spindle power 0,55 kW Max. drilling capacity 4 mm Max. tapping capacity M3 Weight 1700 kgs Dimensions LxWxH = 2163 x 770 x 1650 mm Features, accessories - FMB Mini Turbo barfeeder 3 meter - C axis on both spindles - Low volt lamp - Hydraulic unit - Coolant unit (run with oil) - Central lubrication - Door interlock - Ready part conveyor The lathe was removed from production recently. Good condition.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Number of spindles: 2 Main spindle Max. bar diameter: 16 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 Sub-spindle Dksdsycp Nlspfx Affek Max. bar diameter: 12 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Control: FANUC 18i-T Operating hours: 32,000 h EQUIPMENT FMB Minimag bar loading magazine Note: Dismantling and loading can be carried out by the seller for €1,500.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 47,000 h, functionality: fully functional, spindle speed (max.): 8,000 rpm, travel distance Z-axis: 140 mm, counter spindle speed (max.): 8,000 rpm, number of axes: 5, Equipment: bar feeder, TECHNICAL DETAILS Dkjdpfxjycp Ihs Affok Number of axes: 5 Number of spindles: 2 MAIN SPINDLE Max. bar diameter: 12 mm Z-axis travel: 140 mm Spindle speed: 8,000 rpm Spindle drive power: 2.2 kW Number of tool positions: 13 SUB SPINDLE Max. bar diameter: 10 mm Spindle speed: 8,000 rpm Number of tool positions: 4 MACHINE DETAILS Operating hours: 47,000 EQUIPMENT FMB Minimag bar feeder Note: Dismantling and loading can be handled by the seller for €1,500.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Volume: approx. 1,25 m³ Cutting width: 1.500 mm 4 shafts combined adaptor for excavator and wheelloader Dedpsnubawjfx Affskk

Condition: used, Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw -Type: 1502-2-1085 -Shaft: Ø 24 mm Dkjdpfofngxbjx Affsk -Thread length: 1495 mm -Dimensions: 1700/110/H70 mm -Weight: 10 kg

Condition: used, Year of construction: 2001, STAR sliding headstock automatic lathe S16-R, year of manufacture from 2001. Sliding headstock lathe SA16-R, Ø16mm with FMB Minimag magazine. Sub spindle. Parts conveyor belt. Coolant system has only operated with oil. No chip conveyor. Dkjdpoxmurrofx Affsk

Condition: good (used), Year of construction: 2014, functionality: fully functional, STAR sprue picker From ongoing production Dkedpfsyffcgjx Affjk Fully functional 8 units available Price: 1,100 EUR per unit

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, Axes: X = 2500 mm, Y = 1100 mm, Z = 1500 mm. Fully functional, from ongoing production. Two units available. Price: 6,500 EUR per unit. Dsdpfxsyc E Evs Affekk

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: FF102-062, • overall dimensions mm; • power supply 5.0 kW; Dkodped D I Hqjfx Affsk • power supply 400 V; • pressure 3-5 bar; • 102 single nonspring-actuated needles 2 mm; • conveyor width 400 mm.

Condition: used, Applicable material: Food Dodpfxsx Tcp Uo Affskk Power: 5 kW (7 HP) Empty weight: 725 kg Dimensions (LxBxH): 185 x 102 x 173 cm Cargo space capacity: 750 l Current frequency: 50 Hz Voltage: 380

Condition: used, Year of construction: 2003, Technical details: bar material dia.: 13 mm turning length: 205 mm turning speeds: 12.000 / 12.000 U/min number of tools: 29 Dkodpfx Afovivygjfek driven tools: ja / yes 19 control: FANUC 16 iT total power requirement: 9 kVA weight of the machine ca.: 1,7 t dimensions of the machine ca.: 2,7 x 1,4 x 1,7 m CNC sliding headstock machine, subspindle,Year 2003 (0450) FANUC 16i-T control with 9 axes, 9 axes (X / C1 / Y / E / B / A / X / c2), Main spindle, speed max. 12,000 rpm, C-axis, Counter spindle with collet, speed max. 12,000 rpm, C-axis, 4-fold tool holder 3 transverse drilling apparatuses Revolver with 8 stations various additional tool holders, quills, Extinguishing system Kraft and Bauer High pressure system SF-Systeme Büchele /SHD 150/ 150bar / 2 x 40 um /3 valves, Parts conveyor belt Manuals Operation/Programming/Electrical/Spare Parts Operating tool machine Up to 29 turning tools and up to 19 attachments possible 9.0KVA Tank capacity 170L Loading magazine FMB Turbo 2-16 /3200/A / from Ø2- Ø20 mm / Machine coolant use: Oil Dimensions machine: approx. 2700 x 1400 x 1700 [mm]. Weight machine: approx. 1700 [kg] Dimensions of loading magazine: approx. 4300 x 600 x 1800 [mm]. Weight of loading magazine: approx. 700 [kg]. Dimensions of peripheral HD system: approx. 1500 x 500 x 1000 [mm] Weight of HD system peripherals: approx. 250 [kg] Dimensions peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] *

Condition: used, This listing is for a Star Lab C1000-STR-230EU Plate Centrifuge. The unit is in full working condition and is ready for immediate release. The plate centrifuge makes the safe and quick spin down of droplets and condensation very easy. Sealed plates are loaded vertically and surface tension keeps samples in place so there is no danger of spilling samples. The centrifuge accepts all plates up to 25 mm high. An optional adaptor is available for centrifuging 48-well PCR plates and 0.2 ml PCR tubes or strips. Less than quarter the size of most plate centrifuges Accommodates two plates Rapid start to stop Use before and after thermal cycling to increase PCR yield Accepts skirted, semi-skirted and non-skirted plates Easy cleaning and maintenance Rotor capacity: Two plates, any style, up to 25 mm high Power supply: 230 V, 50/60 Hz Permissible Relative Humidity: < 85% Dimensions (W × D × H) 190 mm × 210 mm × 193 mm Dodpexx Aqtjfx Affskk

Condition: used, This listing is for a Star Lab N2400-4002 Dry Bath System. The unit is in full working condition and is ready for immediate release. The Star Lab Dry Bath System N2400-4002 is a dual block dry bath system designed for various laboratory applications. It is part of the Star Lab Dry Bath System series, which offers great value and convenience for users. Key Features: Dual Block System: The N2400-4002 features two blocks, allowing for simultaneous heating of multiple samples. Digital Microprocessor Controller: The system is controlled by a digital microprocessor, ensuring precise temperature control. Temperature Range: The system can operate at temperatures ranging from 5 °C above ambient to 150 °C. Temperature Accuracy: The temperature accuracy is ±0.2 °C, ensuring reliable results. Timer: The system features a timer that can be set from 0 to 999 minutes. Safety Device: The system is equipped with a leak-proof heating chamber, ensuring safe operation. Power Consumption: The system consumes 200 W of power. Dimensions: The system measures 200 mm x 298 mm x 80 mm (W x D x H). Weight: The system weighs 2.8 kg. Applications: Dodpexxzg Tsfx Affokk Heating and boiling Restriction digests Denaturing DNA Melting agar Coagulation studies In situ hybridisation Hot Start thermocycler reactions

Condition: good (used), Year of construction: 2011, functionality: fully functional, Star SR10J Type C FMB Minimag 20 bar feeder High-pressure unit SHD 100 Dksdpfx Afowic Ngjfsk Mayfran chip conveyor

Condition: ready for operation (used), functionality: fully functional, This is a heavy duty impulse heat sealing machine from Star Universal - the sealer is a double heat machine which means the top and bottom jaw are heated - the sealing wires are 9.5mm wide and the sealing jaws are closed using compressed air which ensures that even when sealing heavy gauge plastic bags you will get a good reliable seal every time. Dkjdsw D E Arepfx Affek Active seal bar length is 400mm Complete unit on stainless steel trolley with adjustable bag support platform - operates from a 240 volt AC supply and requires compressed air Ready to ship worldwide We take care of export documentation and shipping if required contact us for more pictures and videos

Condition: used, We offer the Inject Star P60 separator – an industrial machine for advanced meat recovery (AMR), designed for meat and poultry processing plants and factories that want to maximize the use of raw materials and reduce production losses. The P60 separator works on the basis of a hydraulic press with a crushing chamber, which separates meat from bones and hard tissues and then presses it through a perforated filter. How does the Inject Star P60 separator work? In a special feeding device, the bones are fed into the pressing chamber and pre-compacted. Then, a linear hydraulic system separates the advanced meat from the bones and pushes it through a perforated filter (standard 8 mm). This results in high-quality meat mass while maintaining low calcium content and minimal temperature increase during the process, which has a positive effect on the quality and functionality of the final product. The AMR Inject Star system enables the recovery of up to approx. 35% of meat from red bones, with low wear on consumables and relatively low running costs. Technical data: Manufacturer: Inject Star Djdpfx Afeycc H Rofokk Model: P60 Power supply: 400 V, 3Ph, N Installed power: 18 kW Capacity: 900 kg/h Capacity with bone breaker: 1500 kg/h Process type: hydraulic pressing system with perforated filter (8 mm, optionally 2 mm) Dimensions (L x W x H): 4900 x 1900 x 2900 mm Weight: approx. 4100 kg Advantages of the Inject Star P60 separator High meat recovery from bones – up to approx. 35% of high-quality meat can be recovered from red bones, which significantly increases the profitability of the raw material. Low calcium content – the end product is characterized by a low calcium level (< 1,000 mg/kg) thanks to the use of a precision pressing chamber and perforated filters. Minimal temperature increase – the separation process causes only a slight increase in meat temperature, which has a positive effect on color, structure, and technological properties. Low operating costs – the low-wear design and low maintenance requirements reduce running costs and the risk of expensive downtime. Possibility of line expansion – according to the manufacturer’s offer, the separator can work with a bone crusher as a preliminary stage and with additional soft tissue separators, as well as various loading systems.

Condition: excellent (used), Year of construction: 2010, 7 axes Control FANUC 18i-TB Max. bar diameter 16 mm (main spindle) Djdpfjwnd Dpjx Affjkk Max. bar diameter 16 mm (sub spindle) Max. spindle stock travel 205 mm Max. spindle speed 10,000 rpm Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear machining

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: Fanuc Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub-spindle! TECHNICAL DETAILS Machining Data Bar diameter: max. 16 mm Turning length: max. 205 mm Spindle speed: max. 6,000 rpm Number of axes: 5 Control Djdpfx Ajw Eb Hceffokk Control manufacturer: FANUC Control model: Series 18i-TB MACHINE DETAILS Weight: 1,650 kg EQUIPMENT Main spindle Sub-spindle 8 tool stations for side machining 2x 4 tool stations for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 18 (bar length: 3,200 mm) Coolant system: Oil

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub spindle! A similar machine was recently auctioned successfully! TECHNICAL DETAILS Machining data Max. bar diameter: 16 mm Max. turning length: 205 mm Max. spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control system: FANUC Series 18i-TB MACHINE DETAILS Weight: 1,650 kg EQUIPMENT Main spindle Sub spindle 8 tool stations for side machining 2x 4 tool stations for rear and face machining 3 driven tool stations Small parts discharge conveyor Dkjdjw Uip Aopfx Affok Bar feeder magazine: FMB Minimag 18 Coolant system: Oil

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 3085, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC Swiss-type automatic lathe with main and sub spindle! TECHNICAL DETAILS Machining Data Maximum bar diameter: 16 mm Maximum turning length: 205 mm Maximum spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control: FANUC Series 18i-TB MACHINE DETAILS Weight: 1,650 kg Dkodpow Echnefx Affok EQUIPMENT Main spindle Sub spindle 8 tool positions for side machining 2x 4 tool positions for rear and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 18 Coolant system: oil

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1673, turning length: 205 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 16 mm, controller model: FANUC Series 18i-TB, number of axes: 5, CNC sliding headstock automatic lathe with main and sub spindle! TECHNICAL DETAILS Machining data Max. bar diameter: 16 mm Max. turning length: 205 mm Max. spindle speed: 6,000 rpm Number of axes: 5 Bar length: 3,200 mm Control: FANUC Series 18i-TB MACHINE DETAILS Weight: 1,600 kg EQUIPMENT Main spindle Dodpfsw Uim Ijx Affskk Sub spindle 8 tool stations for side machining 2x 4 tool stations for back and face machining 3 driven tool stations Small parts discharge conveyor Bar feeder: FMB Minimag 3200 A

Condition: ready for operation (used), Year of construction: 1998, operating hours: 76,296 h, functionality: fully functional, machine/vehicle number: 330_030901, turning length: 125 mm, spindle speed (max.): 7,000 rpm, turning diameter: 32 mm, controller model: CNC Fanuc 18i Tb, TECHNICAL DETAILS Machining diameter: max. 32 mm Maximum workpiece length: 125 mm Spindle travel: 310 mm Spindle speeds: 350 – 7,000 rpm C-axis: 1° Number of axes: 7 Drilling capacity with fixed tool diameter: 13 mm Drilling capacity with rotating tool diameter: 8 mm Thread tapping: M12 (with driven tool up to M6) Milling capacity: 10 mm MACHINE DETAILS Control unit: CNC Fanuc 18i Tb Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,512 x 1,700 mm Machine weight: 2,900 kg Bar feeder dimensions (L x W x H): 4,500 x 1,000 x 1,800 mm Bar feeder weight: approx. 1,800 kg Peripheral & accessory dimensions: approx. 1,900 x 700 x 800 mm Peripheral & accessory weight: approx. 200 kg Coolant used by the machine: Oil Operating hours: 76,296 h EQUIPMENT FMB TURBO 5-42 bar feeder (bar capacity 5-42 mm) MAYFRAN hinged belt conveyor Dodpfxsxp Ngvj Affskk Kraft und Bauer fire extinguishing system CO2 fire extinguishing cylinder (10 kg) Operating and maintenance manual Operating tools

Condition: ready for operation (used), Year of construction: 2002, operating hours: 18,000 h, functionality: fully functional, spindle diameter: 32 mm, Equipment: bar feeder, chip conveyor, CNC Swiss-type lathe with comprehensive equipment! Main spindle diameter: 32 mm Dkjdpfx Aoxc I Apsffok MACHINE DETAILS Operating hours: 18,000 EQUIPMENT Synchronously driven guide bushing C-axis on main and sub-spindle Workpiece conveyor belt Collet sleeve main spindle: F37 (673-53) Collet sleeve sub-spindle: F37 (673-73) 3-spindle cross drilling unit 4-position tool holder 16x16 mm Sub-spindle (32 mm sub-spindle capacity) Parts blower to the front Parts ejector Parts ejection safety device Cut-off tool breakage safety device Separate coolant tank with level and flow monitoring Automatic central lubrication unit with oil level monitoring Leveling bolts and plates Toolbox FMB Turbo 3-26 bar feeder, year of manufacture: RS232C interface for bar feeder Fire extinguishing system Kraft & Bauer / GUT Feuerschutz Mayfran chip conveyor

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Dedpfx Aowi Ty Aoffskk Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: good (used), Year of construction: 1996, functionality: fully functional, STAR SH-12 CNC long lathe TECHNICAL DATA Turning diameter: 13 mm Headstock stroke: 140 mm Speed: 400 – 10,000 rpm Spindle power: 1.5 kW Number of tools: 5 Dkjdjvllmhjpfx Affjk Number of tools in the device: 3 Dimensions of the machine: 1500 x 950 x 1650 mm Weight: Approx. 950 kg SCOPE OF OFFER Among other things: (list not exhaustive) STAR SH-12 CNC lathe Bar loader Coolant pump Transformer Exact scope of offer according to photo gallery We accept no liability for the accuracy, completeness and timeliness of the information.