Used Surface Grinder for sale (7,980)

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings Chedpfx Aexqzmkoaqod - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: excellent (used), Double bench grinder Cedpsk Iwx Eofx Aaqehd

Condition: not inspected (used), Zafferani Glas Company Flat 4FPE/25 Length 4.30m Height Cedjxp A H Aspfx Aaqohd 2.36m The machine was purchased from a bankrupt company. The previous owner claims it worked fine the last time he turned it on.

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Chsdpfx Aajxdh Hqjqsd Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: new, functionality: unexamined, machine/vehicle number: PST400, Complete multi-stage industrial washing system with stainless steel tank structure, ultrasonic cleaning, oil separation, demineralized and ultrademi water washing, hot air drying, and integrated filtration. Equipped with digital temperature control, automated regeneration system, and safety containment basin. Ideal for precision cleaning applications in surface treatment. Codpfx Asxfrg Rsaqohd

Condition: good (used), We have 2 cutting mills for sale. The price refers to mill no. 2. The machines were used for cutting plastic but can also be used for processing other synthetic materials. Chodouw Skhspfx Aaqed Both are equipped with a liquid cooling system. Technical data (mill no. 1): -Dimensions: 150 × 115 cm / Height: 210 cm -Rotor diameter: 36 cm -Rotor/knife width: 55 cm -Number of knives: 3 (Fixed knives positioned at an angle, which reduces resistance during cutting and shredding, making the machine more efficient) -Inlet: 30 × 53 cm -Motor: 22 kW / 30 hp -Liquid cooling Technical data (mill no. 2): -Dimensions: 150 × 125 cm / Height: 180 cm -Rotor diameter: 25 cm -Rotor/blade width: 52 cm -Number of blades: 3 -Motor: 22 kW / 30 hp -Liquid cooling Prices: Mill no. 1 – €7200 Mill no. 2 – €5900 For both: €11,900 TAG: plastic grinder, shredder, plastic recycling, plastic cutting machine, industrial grinder, cutting blades, plastic milling machine, industrial machine, cooled grinder, recycling machine, crusher

Condition: good (used), Year of construction: 2002, operating hours: 1,008 h, functionality: fully functional, type of input current: three-phase, total height: 4,310 mm, total width: 2,372 mm, total length: 2,565 mm, input voltage: 400 V, power: 20 kW (27.19 HP), overall weight: 5,000 kg, workpiece weight (max.): 2,500 kg, operating pressure: 7 bar, inner dimension height: 1,000 mm, inner dimension length: 1,500 mm, turntable diameter: 1,500 mm, Equipment: documentation/manual, We sell a hanging - table jet blaster. The jet has a table load capacity of 2.5t. Possibility of using as a hanging jet blaster, maximum hook load capacity of 300kg. The jet blaster has a filter in it and the extraction works as a compact. Everything is inside the machine. It does not have external extraction. It is possible to try it, it is under voltage. Everything can be obtained and is still being produced. The total power of the engines is Turbine 2 x 7.5kw. Abrasive transport and extraction approx. 6kw. Total approx. 20kw. I will recommend the manufacturer with spare parts. Blade set: €245.00/set Blade spring: €1.15/pc Top plate: €82.50/pc End plate: €82.50/pc Impeller: €86.00/pc Impeller casing: €93.70/pc SAF35 carrier: €95.00/pc Throwing wheel: €718.00/pc Metal unit housing €768.00/pc Chedpfju Nk H Sjx Aaqjd Metal unit housing lid €32.40/pc Otherwise the machine is functional, very little used. I will pack some blades as spare parts.

Year of construction: 1998, condition: good (used), CHEVALIER FSG 1640 AD SURFACE GRINDING MACHINE MAKE CHEVALIER, MADE IN TAIWAN MODEL FSG-1640 AD YEAR 1998 TABLE SIZE 1000 x 400 mm GRINDING WHEEL SIZE 445 mm TRAVERSES 400 x 1000 mm MAX HEIGHT FROM TABLE TO SPINDLE CENTRE 445.0 mm TOTAL POWER REQUIRMENT 7.4 kW PLUS Chjdsirfpgjpfx Aaqjd AUTOMATIC DOWN FEED WHEEL-MOUNTED WHEEL DRESSER SYSTEM HYDRAULIC MOVEMENT COOLANT SYSTEM 400.0 x 1000.0 mm ELECTRO MAGNETIC CHUCK MACHINE MANUALS

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid In good working order Chjdpfxewwkk Ij Aaqjd

Condition: as good as new (ex-display), functionality: fully functional, Table size 540 x 250 mm Max table travel 560 x 260 mm Max distance from table to spindle center 450 mm Table slide-way Double-V rail Feed of cross handwheel, per revolution 5 mm Feed of cross handwheel, pe graduation 0,02 mm Feed of vertical handwheel per revolution 1,25 mm Feed of vertical handwheel per graduation 0,01 mm Chsdpju Hzg Rsfx Aaqsd Wheel speed (50 Hz) 2850 rpm Wheel speed (60 Hz) 3440 rpm Wheel size 200x31,75x20 mm Power of spindle motor 1500 W Hydraulic station motor 1500 W Working pressure 3 Mpa Max runoff 18 L/min Fuel tank capacity 80 L Coolant pump 40 W Machine's net weight 900 kg Size 1,80x1,40x1,80 m Robust and reliable construction. Zero working hours Price should remain the same till end of December.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: Inv.119140, total length: 26,000 mm, total width: 9,000 mm, Equipment: cabin, lighting, 1 used painting line, featuring circulating conveyor belt, manual spray booth for sample coating, automatic spray booth equipped with robot and workpiece rotary holder, reverse osmosis system for DI water, paint preparation, and exhaust air treatment system. The system operates two shifts in serial production. Manual loading and unloading onto a conveyor belt; otherwise fully automatic. 18.7.25: Update: Dismantling is to be carried out from September 2025 on-site in Lohr by the buyer. The buyer is responsible for all costs related to dismantling, packaging, collection, and transport to their own facility (FCA terms). The area must be vacated no later than mid-January 2026 for installation of new production machines. For further details, see attached handout/flyer. Due to the significant effort required for dismantling, early and thorough planning with the disassembly company is essential, as is prompt contact or a visit to the site. Additional information is provided in the attached handout. --- 1 used painting line, with circulating conveyor, manual paint booth for samples, automatic paint booth with robot and workpiece rotary fixture, reverse osmosis system for DI-water, paint preparation, exhaust air treatment. Info in English, French, Spanish available upon request. --- Please indicate your offer price. Sale only within the EU, Switzerland, Turkey, and United Kingdom. Dismantling to be performed by the buyer. --- No packaging; all warranty rights are excluded. Should you wish to dismantle the system yourselves, please indicate this in your offer. We do not guarantee the accuracy of technical data, completeness of accessories and tools, or compliance with all safety and environmental regulations as per accident prevention guidelines. Codpfswqg Iiox Aaqshd

Year of construction: 1998, condition: used, Grinder for sharpening FOR TOOLS GRIFO F36 M FOR TOOLS FOR WOOD FACTORY WHIT PUMP HYDRAULIC AND SANDER dividing chain, SAWS, MILLING CUTTERS Chjdpfxeb Umtks Aaqjd

Condition: new, Surface Shields SC300XL 200 pcs Shoe Covers. Csdpevxvlzofx Aaqjhd Please check out our other listings as well.

Condition: new, Year of construction: 2025, General information Field of application: Construction Reference number: 3 Weights Empty weight: 1.300 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 18-28ton Delivery terms: EXW Working pressure: 350 bar Required hydraulic flow: 250 l/min Production country: KR Additional information Please contact Ö. Inalkac for more information Cjdpfsv Dtatsx Aaqohd ADC20 model is available from Netherlands. ADC20 model fits on 18-28ton excavator. Length of cutter: 1110mm Width of cutting head: 870mm Diameter of cutting head: 670mm Number of cutters: 48 pieces Rated Power: 80kW

Condition: new, Year of construction: 2024, machine/vehicle number: Phyton 1600, Lumago shredder Chsdpfxetzlhgj Aaqsd

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 6998, center height: 305 mm, workpiece diameter (max.): 400 mm, workpiece length (max.): 1,600 mm, Tool grinding machine with automation! TECHNICAL DETAILS Maximum machining diameter: approx. 400 mm Maximum center height: approx. 305 mm Codpfxjxqqu Rj Aaqehd Maximum machining length: approx. 400–1,600 mm MACHINE DETAILS Electrical Data Connection voltage: 3x400 VAC Mains frequency: 50 Hz Nominal current: 81 A Control voltage: 230 VAC / 24 VDC EQUIPMENT Multi-wheel configuration with 2–4 grinding wheels (wheel diameters 610/760 mm or 400/500 mm) Monolithic cast iron machine bed Coolant channels for thermal stability and vibration damping Automation: Promot Automation EPL Workpiece types: shafts, bearings, spindles, polygonal/non-round workpieces

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 025, overall weight: 2,000 kg, grinding length: 15 mm, rotational speed (max.): 6,000 rpm, grinding diameter: 2 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates timely collection between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Grinding diameter: 0.1 – 2.0 mm Cedpjxnl Dhefx Aaqjhd Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Z stroke: 67 mm Y stroke: 35 mm A axis: 63° B axis: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Station 2: Flute grinding and relief grinding Spindle diameter: 70 mm Spindle power: 0.30 kW Frequency converter: 2,000 – 6,000 rpm Grinding wheel for flutes, diameter: 150 mm Grinding wheel for reliefs, diameter: 100 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,200 mm Weight: 2,000 kg EQUIPMENT Three-axis simultaneous + 2 robot axes

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 126 0647, KOLBE MWE 52 mixer-grinder with CARS HKW 200 crate lifter! MACHINE DETAILS Chsdpfxoxrt Nye Aaqod Power: 10.0 + 1.1 kW Connection voltage: 400 V Frequency: 50 Hz Control voltage: 24 VAC Operating voltage: 400 V Rated current: 20.5 + 2.8 A

Condition: repair required (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: 49299, rotary table diameter: 600 mm, grinding height: 400 mm, workpiece weight (max.): 300 kg, grinding diameter: 500 mm, workpiece diameter (max.): 500 mm, TECHNICAL DETAILS Workpiece diameter: 500 mm Cjdpfxjxr U T Ts Aaqohd Workpiece weight: 300 kg Workpiece height: 400 mm Grinding diameter: 500 mm Grinding height: 400 mm Table load capacity: 300 kg Magnetic rotary table diameter: 600 mm Rotary table speed: 20–80 rpm Y-axis Max. feed rate: 300 mm/min Incremental position measurement system, rotary encoder, resolution: 0.001 mm Z-axis Max. automatic cross travel: 330 mm Cross feed: 4–1,500 mm/min, adjustable Incremental position measurement system, rotary encoder, resolution: 0.001 mm Grinding spindle taper: 60 mm Grinding wheel: 400 x 100 x 127 mm MACHINE DETAILS Total power requirement: 18 kW Grinding spindle drive: 10 kW Space requirement approx.: 2,500 x 2,700 x 2,800 mm Control cabinet dimensions (L x H x D): 1,600 x 2,200 x 500 mm EQUIPMENT Coolant system with paper band filter NK grinding program Electronic handwheel switchable for B-Y-Z axis Machine enclosure with manually operated sliding door for loading and unloading Note: The frequency converter for the grinding spindle is defective. An offer from ELB is available (costs € 3,712.50 + packaging and shipping).

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Grinding spindle speeds Csdpfx Aajxtdfbsqshd Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Spindle 3: 45,000 rpm B-axis swivel range: -90°/+15° MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h EQUIPMENT Touch probe (on 4th spindle position)

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 090, overall weight: 2,000 kg, grinding length: 15 mm, rotational speed (max.): 6,000 rpm, grinding diameter: 2 mm, No reserve price – guaranteed sale to the highest bidder! Cjdpfx Aexnlyioaqohd The payment deadline for the machine is 20.11.2025! Placing a bid constitutes a binding commitment to collect the item punctually between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Grinding diameter: 0.1 – 2.0 mm Collet: B 8 Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Z-axis stroke: 67 mm Y-axis stroke: 35 mm A-axis: 63° B-axis: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Station 2: Flute and relief grinding Direct-drive spindle diameter: 70 mm Direct-drive spindle power: 0.30 kW Frequency converter: 2,000 – 6,000 rpm Grinding wheel diameter flute grinding: 150 mm Grinding wheel diameter relief grinding: 100 mm MACHINE DETAILS Electrical data Operating voltage: 3 x 380 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,200 mm Weight: 2,000 kg EQUIPMENT Three simultaneous axes 2 robot axes

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotary table diameter: 800 mm, overall weight: 6,500 kg, grinding wheel diameter: 400 mm, workpiece diameter (max.): 1,000 mm, grinding wheel width: 80 mm, TECHNICAL DETAILS Workpiece diameter: 1,000 mm Rotary table diameter: 800 mm Max. distance from rotary table to grinding spindle center: 850 mm Grinding wheel diameter: 400 mm Grinding wheel width: 80 mm MACHINE DETAILS Total power requirement: 25 kW Grinding spindle motor: 11 kW Chedpfxjxr U R Eo Aaqed Dimensions & Weight Space requirement (L x W x H): approx. 4,100 x 3,200 x 2,600 mm Machine weight: approx. 6,500 kg EQUIPMENT Coolant system 500 liters with paper band filter 4 grinding wheels (3 unused)

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 022, overall weight: 2,000 kg, grinding length: 15 mm, rotational speed (max.): 6,000 rpm, grinding diameter: 2 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Bidding obliges you to collect the machine on time between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS GRINDING RANGE Grinding diameter: 0.1 – 2.0 mm Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm STROKE Z stroke: 67 mm Y stroke: 35 mm AXES A: 63° B: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Overall length: 30 – 50 mm Station 2: Fluting and back grinding Direct drive spindle: 70 mm diameter, 0.30 kW Inverter: 2,000 – 6,000 rpm Flute grinding wheel: 150 mm diameter Back grinding wheel: 100 mm diameter MACHINE DETAILS Electrical Data Operating voltage: 3 x 380 V Frequency: 50 Hz Chsdpfxexnlw Ue Aaqjd Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,200 mm Weight: 2,000 kg EQUIPMENT Three-axis simultaneous + 2 robot axes

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 0249, overall weight: 2,000 kg, grinding length: 15 mm, grinding diameter: 2 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20.11.2025! Placing a bid obligates you to collect the machine between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Grinding Range Grinding diameter: 0.1 – 2.0 mm Cutting length: 0 – 15 mm Helix angle: 24 – 45° Overall length: 30 – 50 mm Z stroke: 67 mm Y stroke: 35 mm Axes Csdjxnlu Hjpfx Aaqshd A: 63° B: 360° Station 1: Robot for loading/unloading Shank diameter: 0.5 – 3.175 mm Station 2: Flute and relief grinding Direct drive spindle diameter: 70 mm Drive power: 0.30 kW Inverter speed: 2,000 – 6,000 rpm Flute grinding wheel diameter: 150 mm Relief grinding wheel diameter: 100 mm MACHINE DETAILS Electrical Data Operating voltage: 3 x 400 V Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 2300 x 2000 x 2200 mm Weight: 2000 kg EQUIPMENT Three-axis simultaneous operation 2 robot axes

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 278, workpiece weight (max.): 50 kg, grinding wheel diameter: 150 mm, grinding length: 340 mm, rotational speed (max.): 8,000 rpm, workpiece diameter (max.): 250 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bids are binding and require collection within the period 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Max. grinding wheel diameter: 150 mm Speed range: 1,000 – 8,000 rpm Workpiece spindle taper: SK 50 Max. workpiece weight: 50 kg Max. diameter: approx. 250 mm With tailstock: max. 125 mm Max. length: approx. 500 mm Chjdoxm Rnvopfx Aaqod With tailstock: max. 250 mm Max. grinding length: 340 mm X-axis grinding stroke: 340 mm Y-axis traverse: 240 mm Z-axis traverse: 240 mm A-axis speed: 120 rpm A-axis swivel range: 360° C-axis speed: 20 rpm C-axis swivel range: 197° MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,400 mm Total weight: 2,500 kg EQUIPMENT Coolant filtration system Oil mist extraction Documentation