Used Swivel Radius for sale (5,441)

Condition: used, functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2466618, load capacity: 200 kg, lifting height: 13,000 mm, platform length: 1,200 mm, platform width: 960 mm, overall weight: 6,700 kg, transport length: 4,400 mm, transport width: 1,500 mm, transport height: 2,080 mm, fuel type: electric, tire size: 0,60 x 0,19 m, color: red, Technical Data Year of manufacture: 2020 Engine: Electric Working height: 15.00 m Platform height: 13.00 m Platform dimensions (L x W): 1.20 m x 0.96 m Overall dimensions (L x W x H): 6.05 m x 1.50 m x 1.97 m Lateral outreach: 7.60 m Up-and-over height: 7.00 m Basket arm swing range: +70° / -70° Dodpsyqz A Tjfx Ak Aekw Horizontally swiveling basket arm: +70° / -70° Basket rotation: 140° Slew range: 355° Lifting capacity: 200 kg / 2 persons Inside turning radius: 1.87 m Outside turning radius: 3.96 m Outer turning circle: 4.82 m Travel speed: 0.6 - 5.0 km/h Outdoor operation: 45 km/h Max. gradeability: 25% Max. permissible tilt: 5% or 3% Battery capacity: 300 Ah / 2x224V Weight: 6,700 kg Fully functional, normal signs of use

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2465688, load capacity: 200 kg, platform length: 1,200 mm, platform width: 960 mm, overall weight: 6,700 kg, transport length: 6,050 mm, transport width: 1,500 mm, transport height: 1,970 mm, fuel type: electric, tire size: 0,60 x 0,19 m, color: red, Technical Specifications Year of manufacture: 2017 Engine: Electric Working height: 15.00 m Platform height: 13.00 m Platform dimensions (L x W): 1.20 m x 0.96 m Overall dimensions (L x W x H): 6.05 m x 1.50 m x 1.97 m Dkedpfx Akjyqz A Hs Asw Lateral outreach: 7.60 m Up-and-over height: 7.00 m Basket arm swing range: +70° / -70° Horizontally swiveling basket arm: +70° / -70° Basket rotation: 140° Slew range: 355° Load capacity: 200 kg / 2 persons Inside turning radius: 1.87 m Outside turning radius: 3.96 m External turning radius: 4.82 m Travel speed: 0.6 - 5.0 km/h Outdoor operation wind resistance: 45 km/h Maximum climbing ability: 25% Maximum permissible tilt: 5% or 3% Battery capacity: 300 Ah / 2x224V Weight: 6,700 kg Fully functional, general signs of use

Condition: used, Holz Her Sprint 1329 Multi Heavy-duty version - Edge thickness 0.4 - 8 mm (15 mm with tool change) Edge Control 19 control system, 18.5" touchscreen color display 16:9 ECO mode - energy-saving mode fa.s.t. setting technology "Tool change in the gap" iTronic - adaptive pressure and adhesive application control and cleaning routine Motorized, position-controlled bridge height adjustment Long infeed guide rail, motorized, controlled via PLC Pre-milling unit for attachment before the gluing station Edge magazine, fully automatic for coil and strip material Gluing unit GLU-JET GJ301 automatic, cartridge system - granulate + PU adhesive, thin-film technology Edge height max. 65 mm Pressure unit DW 501, motorized-pneumatic, NC servo axis Cutting unit for coil and strip material up to 15 mm edge thickness With electro-pneumatic adjustment for 0-10° bevel of the cutting saw Multi-function milling unit MOT6 – 6 NC control axes, including air blow nozzles Flush trimming 8 mm (15 mm) Djdpfsz Rl Tmox Ak Aokw Radius trimming Chamfer trimming 45° Copy milling unit MOT 6 Multi, corner copying, postforming corners with 6 NC control axes, for milling the upper and lower longitudinal edge and copy milling the front and rear end face, vertical edge, working height 60 mm with shelving program, including air blow nozzles Scraping unit MOT6 Multi, including air blow nozzles and chip scraper Surface scraping unit - finishing with pre- and post-scanning, including air blow nozzles Buffing unit for final polishing and edge polishing with 2 textile discs, swiveling 5° Spray device for infeed and outfeed area as well as antistatic agent and lubricant at the pressure unit Infeed area - electronically controlled release agent spray device Before the pressure unit - electronically controlled antistatic spray device After the pressure unit - electronically controlled lubricant spray device Outfeed area - electronically controlled cleaning agent spray device with cleaning agent First delivery 2022, very few running meters, from a craft business Machine is WORKSHOP INSPECTED in TOP CONDITION / Leasing possible Ex works

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, spindle motor power: 3,700 W, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 20 mm, spindle bore: 25 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10,000 rpm, bar passage: 20 mm, bar diameter (max.): 20 mm, Equipment: rotational speed infinitely variable, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 25 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Travel Z1 [mm]: 205, long turning mode Travel Z1 [mm]: 55, short turning mode Type of collet: 145E Synchronously rotating guide bushing unit Type of guide bushing: T223 TAILSTOCK Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 Maximum turning diameter [mm]: 20 Max. part length, eject forward [mm]: 80, Option 120 C-axis with 0.001° Travel Z2 [mm]: 255 Type of collet: 145E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling unit: - Number: 4 modular, driven drilling/milling spindles (Tools 4 x ER16) - Manual B-axis 3 x ER 16 - Power: [kW]: 2.5 (S6000) - Swiveling range 90° (0° ~ 90°) Cross slide, tailstock - Number: 3 fixed drilling stations ER16 Rear-end machining with Y2 axis, travel 60 mm - Tool carrier for 8 tools - 4 modular, driven drilling/milling spindles ER11 - 4 fixed drilling stations Ø 19.05 mm AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Connected load [kVA]: 15 CONTROL Control type: Fanuc 32iB Plus Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External operating panel with handwheel 10.4" color monitor LCD/MDI Automatic shutdown function PowerOff Program check function (test run via handwheel possible) Continuous threading cycle Running time display / part counter CF card interface Dksdpfx Aj Ahy Tzjk Ajw Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder Interface for JBS Weight 2.95 tons ACCESSORIES Alignment feet with leveling elements Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liter lubricant volume) Coolant flow monitoring Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating instructions including parameter list and test report)

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2465638, load capacity: 200 kg, platform length: 1,200 mm, platform width: 960 mm, overall weight: 6,700 kg, transport length: 4,400 mm, transport width: 1,500 mm, transport height: 2,080 mm, fuel type: electric, tire size: 0,60 x 0,19 m, color: red, Equipment: UVV, Technical Data Year of manufacture: 2017 Motor: Electric Working height: 15.00 m Platform height: 13.00 m Platform dimensions (L x W): 1.20 m x 0.96 m Overall dimensions (L x W x H): 6.05 m x 1.50 m x 1.97 m Lateral outreach: 7.60 m Up-and-over clearance: 7.00 m Basket arm swing range: +70° / -70° Dkedpfeyqzh Nsx Ak Aew Horizontally swiveling basket arm: +70° / -70° Basket rotation: 140° Slew range: 355° Load capacity: 200 kg / 2 persons Internal turning radius: 1.87 m External turning radius: 3.96 m Outer radius of gyration: 4.82 m Travel speed: 0.6 - 5.0 km/h Outdoor operation wind speed: 45 km/h Max. gradeability: 25% Max. permissible tilt: 5% or 3% Battery capacity: 300 Ah / 2x224V Fully functional, standard signs of use, safety inspection (UVV)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: blue, #Chassis – haulage semi-trailer - Fine-grain steel welded construction, fifth wheel coupling plate with replaceable 2" kingpin - Slightly angled outer frame with "Load-Lock-Profil" for lashing strap attachment - 13 pairs of additional lashing rings recessed into the outer frame, 2.5 t each - 24 t two-speed landing legs, single-side operation, straight foot, without thrust compensation - Pull-out ladder at the rear - Side door retainers - Wheel chocks with holder - Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm - Note: free support-leg corner dimension / rear swivel radius approx. 1930 mm - Galvanised steel rear underrun protection - Full-width rear mudflap - Half-shell mudguards with anti-spray flaps on the last axle only - Rear impact protection - "Blocker" – galvanised transverse steel angle, protecting against forklift damage and shielding the door hinges - 4 pairs of ferry lashing rings, marked yellow - Bolted pallet stop on both sides, approx. 15–20 mm high, reducing loading height by approx. 15–20 mm - Stainless steel storage box, W=600/H=400/D=500 mm, with polished lockable door #Rear wall / rear corner posts - Rear corner posts in steel up to roof edge, tarpaulin attachment with round tube and tensioning ratchet - Two-leaf rear portal doors, each with 2 internal rod locks #Tarpaulin - Tarpaulin with welded-in horizontal and vertical straps - Quick Lock System for side curtain with central locking, on the left (direction of travel) - Stainless steel tensioning locks on the right (direction of travel) - Customs cable running around the trailer with holder on the front wall (no customs seal, not combined with Quick Lock System) - Customer livery on side curtains and rear portal - Curtain with high-strength embedded spring steel strips, left side (direction of travel) – insertion battens on the left omitted as a result #Roof - Sliding roof, rear end-lift foldable, roof cover slides from rear to front, curtain colour: white - Eco lift roof, raised by approx. 380 mm on both sides, gas-strut assisted, optimum rain gutter at the rear, at the top of the rear bow above the doors #Paintwork - Frame: hot-dip galvanised incl. passivation Dkodpfx Aswyiw Esk Ajw - Landing legs: black coated - Front corner posts: galvanised and painted in front wall colour - Front wall: MB 5328 blue - Rear corner posts: galvanised and painted in rear wall colour - Rear wall: MB 5328 blue - Tarpaulin: RAL 5010 gentian blue - Pallet box lid: RAL 2011 deep orange - Note: the images are archive photos; the vehicle may still be in use.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2465358, load capacity: 200 kg, lifting height: 13,000 mm, platform length: 1,200 mm, platform width: 960 mm, overall weight: 6,700 kg, transport length: 4,400 mm, transport width: 1,500 mm, transport height: 2,080 mm, fuel type: electric, tire size: 0,60 x 0,19 m, color: red, Technical Data Year of manufacture: 2016 Motor: Electric Working height: 15.00 m Platform height: 13.00 m Platform dimensions (L x W): 1.20 m x 0.96 m Overall dimensions (L x W x H): 6.05 m x 1.50 m x 1.97 m Side outreach: 7.60 m Up and over height: 7.00 m Jib arm articulation range: +70° / -70° Horizontally swivelling jib arm: +70° / -70° Platform rotation: 140° Dodpfx Aoyqz Ayjk Ajkw Slew range: 355° Load capacity: 200 kg / 2 persons Inner turning radius: 1.87 m Outer turning radius: 3.96 m External turning circle: 4.82 m Driving speed: 0.6 - 5.0 km/h Outdoor operation: 45 km/h Max. gradeability: 25% Max. permissible tilt angle: 5% or 3% Battery capacity: 300 Ah / 2x224V Weight: 6,700 kg Fully functional, normal signs of use

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2465318, load capacity: 200 kg, lifting height: 13,000 mm, platform length: 1,200 mm, platform width: 960 mm, overall weight: 6,700 kg, transport length: 4,400 mm, transport width: 1,500 mm, transport height: 2,080 mm, fuel type: electric, tire size: 0,60 x 0,19 m, color: red, Equipment: UVV, Technical Data Year of manufacture: 2016 Motor: Electric Working height: 15.00 m Platform height: 13.00 m Platform dimensions (L x W): 1.20 m x 0.96 m Overall dimensions (L x W x H): 6.05 m x 1.50 m x 1.97 m Side outreach: 7.60 m Up and over height: 7.00 m Jib arm articulation range: +70° / -70° Horizontally swivelling jib arm: +70° / -70° Platform rotation: 140° Slew range: 355° Dkjdpfx Akoyqyqie Asw Load capacity: 200 kg / 2 persons Inner turning radius: 1.87 m Outer turning radius: 3.96 m External turning circle: 4.82 m Driving speed: 0.6 - 5.0 km/h Outdoor operation: 45 km/h Max. gradeability: 25% Max. permissible tilt angle: 5% or 3% Battery capacity: 300 Ah / 2x224V Weight: 6,700 kg Fully functional, normal signs of use

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1205-H740-00, overall weight: 6,000 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 50 mm, controller model: ANDRONIC 2060, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range, X-axis: 500 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 50 mm Travel range, Z-axis: ±50 mm, relative to the central axis of the rotary indexing table / 200 mm Travel speed, X-axis: max. 30 m/min Travel speed, Y-axis: max. 20 m/min Travel speed, Z-axis: max. 30 m/min Acceleration, X/Y/Z-axis: 10 m/s² MACHINE DETAILS Control model: ANDRONIC 2060 Dimensions & Weight Dkodpfx Aezu Iwwok Aow Dimensions (L x W x H): 2,500 x 1,650 x 2,700 mm Total weight: 6,000 kg Operating voltage: 230/400 V Frequency: 50 Hz Rated apparent power: 12 kVA Swivel radius, control panel: approx. 1,050 mm

Condition: used, Platform transport wagon, heavy-duty trailer Industrial trailer with 2-axle swivel steering Manufacturer: PLAN, Type 11 Chassis No.: 31361-1, Year of manufacture 03/2015 Payload: 20,000 kg Unladen weight: approx. 3,760 kg Permissible total weight: 23,760 kg Platform height: 850 mm Djdeztrv Uepfx Ak Ajkw Platform length: 5,000 mm Platform width: 2,500 mm Overall length: 6,100 mm (without drawbar) Overall width: 2,500 mm Tires: Ø 559 x 300 mm (solid rubber tire 559/305-406.4) - 4 wheels with 2-axle swivel steering - Tracking - Interchangeable drawbar, drawbar can be bolted on at the front or rear - Drawbar with a tow eye size of 40 mm diameter - Small turning radius - Very stable outer frame made of I-beams, height 280 mm, width 95 mm - Very stable steel floor made of 10 mm checkered plate Length for transport: 610 cm (with drawbar folded up) Width for transport: 250 cm Height for transport: 85 cm Weight per trailer: approx. 3,760 kg Good condition 2 units available Price quoted per trailer

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. Dedpfx Aspwgr Hok Aekw ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Year of construction: 1972, condition: used, machine/vehicle number: WIT, Technical data: 1x Vetter / Demag column-mounted slewing jib crane NL 250KG with Demag chain hoist Payload at full radius 250KG / 0.25to payload Several cranes available (7 pieces) Height: approx. 3.75-4m Outreach: 3+3.9m Weight complete approx. 700KG incl. cable towing, undercarriage etc Swivel range 360°, connection to 400V 16A Optionally also available with 250KG chain hoist Crane is disassembled and immediately available Item location is 75053 Gondelsheim Dkedpfx Akjrwkbuo Asw Further cranes are available, lifting capacity 80-5000Kg, please inquire See pictures Shipping by forwarding agent or collection by appointment only

Condition: excellent (used), functionality: fully functional, Swivel spindle milling machine KÖLLE F 45 in very good condition; this machine comes from an assembly company and has been idle for the last few years, as it was no longer needed. Everything functions perfectly. All bearings and guides are in good condition; the machine runs very smoothly. Year of manufacture: 1990 with control panel on top Both fence jaws on the milling fence can be adjusted in depth, with fine adjustment and scale, allowing for planing work, e.g., on a gluing profile. The entire milling fence can also be adjusted in depth using a handwheel and a leadscrew, enabling very precise and fast adjustments. with AIGNER integral fence with spindle locking lever Chips can be removed very effectively with 2 extraction ports, 125 mm on the milling fence and 100 mm on the machine table. with 30 mm spindle, which can be swiveled steplessly from -5 to 45°; the spindle is swiveled electrically with a very precise display; fine adjustment can be made manually with a handwheel. The height adjustment is also electric, and a handwheel is also available for fine adjustment. with right/left rotation We will personally deliver and demonstrate the machine anywhere in Germany for €220.00, so you have no risk when purchasing; shipping to Austria and the rest of the EU is also possible upon request. with a large table opening of 375 mm, which can be reduced by using various rings (this allows for the use of cutters with a very large diameter, and you can also safely mill with small cutters). with 3000, 4000, 5000, 6000, 8000 and 10000 rpm the table is made of heavily ribbed cast iron with 30 mm spindle in the machine; another spindle can also be installed very robust and durable design; the machine was built for heavy-duty milling operations and is suitable for all milling applications. optimal power transmission through belt drive with instruction manual Dedpfx Akszt Ai Es Askw with 3-roller feed system HOL HER, type ET 117 the feed system has right/left rotation and 8 speeds; the feed rollers are individually mounted and are all in new condition. the machine table is 1000 mm deep and 1200 mm wide; it has an extendable support table 1200 mm long. the machine is ready for immediate use. 380 V, 4700 and 5700 W due to the 2 speeds with all necessary safety devices, motor brake, and emergency stop switch; the machine is approved by the German Wood Trade Association (Holz-BG) and has the GS safety mark. the machine weighs approximately 1000 kg with motor protection switch against overload professional-grade machine, not a hardware store reject optimal, simple, fast, and safe operation

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis, bent * Special steel frame made of high-strength fine-grain steels, electrically welded at the joints, well-dimensioned outer frame * 4-axle arrangement. Wheel protection above the axles with spray mist suppression * All steel parts sandblasted * Lateral impact protection made of anodized aluminum mounted * Increased point load of approx. 30,000 kg over approx. 4,000 mm * Special design in the bent area for maximum low-bed length in combination with AluLeg outrigger supports instead of telescopic outrigger winches, max. rear swivel radius of the tractor unit approx. 2,100 mm Special superstructure with rear beam extension * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding tarpaulin with plastic flaps * Rear beams extendable to approx. 4,200 mm * Three sliding beams per side with rubber cord relief Dkodpfolthguex Ak Aow * Additional center beam locking in the roof beam and parking position, by means of a pull cable and spring latch * Lifting roof mechanically adjustable, lifting height approx. 400 mm, can be operated on both sides or on one side, without opening the opposite side and the doors * Additional height adjustment of approx. 480 mm in approx. 40 mm increments with height adjustment in the beams * Front overhang on the front wall for operation under tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, bottom 450 mm pockets, above 4 rows of single pockets * Only 3 rows of insert slats in the upper bed. Spacing between slats evenly distributed Floor * Approx. 27 mm special water-resistant glued beech plywood, rough surface * Steel sheet in the wheel arch area * Forklift truck accessible according to DIN standard * Outer frame flush with the surface Brakes * WABCO compressed air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and aggregate load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low-loader design * Air suspension with lifting and lowering device, total stroke approx. 230 mm * Third and fourth axles as friction-jointed trailing axles with electric and mechanical lock Twin tires * 235/75 R 17.5, -16-ply, incl. E-wheel holder. without E-wheel Paint finish * Chassis in RAL 3002 red, solid color * Center beams, axles coated with KTL black * Corner beams in hot-dip galvanized design * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Superstructure in RAL color, solid color Special equipment incl. * Air suspension in ECAS design, operated on the semi-trailer * Overwidth signs front and rear in zinc-plated, steplessly telescopic design with attached warning lights including socket for rotating beacons (small panels) * Sliding tarpaulin cover locking additionally from the outside * 4 beam adapters for special outer frame profile, to lock the center beams as desired * PVC sliding tarpaulin, color similar: RAL 9006 silver * Roof tarpaulin translucent, in overwidth and overheight design, flat hooks, tarpaulin folds, closures with pawl lock /OCS * Telescopic socket for rotating beacon including beacon on the rear left * Outer frame for machine transport with app

Year of construction: 1988, condition: used, machine/vehicle number: MBMA13+25, Technical data: 1x Demag KBK 100 column slewing crane NL 125KG with chain hoist Dedpfx Akerhzh Se Aokw Payload at full radius 125KG / 0.125ton payload Height: approx. 3m UK boom: approx. 2.65m Projection: 3m Hook height: approx. 2.15m Weight completely approx. 350KG with 125KG Demag DK chain hoist including bolts, cable drag, chassis, end cap etc. Crane is available twice Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Shipping by courier or collection only by appointment

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 2466208, load capacity: 200 kg, lifting height: 13,000 mm, platform length: 1,200 mm, platform width: 960 mm, overall weight: 6,700 kg, transport length: 4,400 mm, transport width: 1,500 mm, transport height: 2,080 mm, fuel type: electric, tire size: 0,60 x 0,19 m, color: red, Equipment: UVV, Technical Specifications Year of manufacture: 2019 Engine: Electric Working height: 15.00 m Platform height: 13.00 m Platform dimensions (L x W): 1.20 m x 0.96 m Dkjdpfxjyqyhue Ak Asw Overall dimensions (L x W x H): 6.05 m x 1.50 m x 1.97 m Lateral outreach: 7.60 m Up-and-over height: 7.00 m Boom arm swing range: +70° / -70° Horizontally swiveling basket arm: +70° / -70° Basket rotation: 140° Slewing range: 355° Load capacity: 200 kg / 2 persons Inside turning radius: 1.87 m Outside turning radius: 3.96 m Outer turning circle: 4.82 m Driving speed: 0.6 - 5.0 km/h Outdoor use: 45 km/h Max. gradeability: 25% Max. permissible slope: 5% or 3% Battery capacity: 300 Ah / 2x224V Weight: 6,700 kg Fully operational, normal signs of use, UVV inspected

Condition: new, thread dia. bis M 36 turning speeds max. 150 U/min thread M5 - M36 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 4.0 kW weight - pallet system 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug Dkodpfxey Umd Ej Ak Aew * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: new, Year of construction: 2024, The SCHORR electric dumper is ideal for transporting heavy loads and bulk materials. With a load capacity of 500 kg, this wheelbarrow with electric motor is a real powerhouse that can also handle larger loads effortlessly and, above all, quietly. Thanks to the hydraulic tipping skip with a large tipping radius, you can unload your load easily, quickly and completely. Our electric dumper is powered by a brushless 48V electric motor with an output of 1000 watts. This motor is not only particularly powerful, but also extremely durable and low-maintenance. The motor is also particularly quiet, making it ideal for use in stables, for example. The side extension for the minidumper increases the loading volume of the dumper by more than 60%. The side extension is ideal for loose, light goods such as straw, hay, light rubble, etc. Please note that the permissible payload of 500 kg remains unchanged. The SCHORR electric motorized wheelbarrow offers an impressive battery life of 8 to 10 hours, so you can easily get through the day or shift. The charging time is approx. 7 hours for 100%. The battery dumper is easily charged via the charger included in the scope of delivery at a normal 230V socket. The compact size of the electric dumper in combination with the swivel rear wheels makes it particularly flexible and maneuverable. It is therefore ideal for use on tight construction sites or in narrow aisles (e.g. in horse stables). SCHORR RR500DEHRAS electric dumper - Discover the advantages: Load capacity up to 500 kg Increased loading volume Hydraulic tipping drive (tipping without effort) Very easy to operate without effort Powerful 1000 watt 48V electric motor Very low-noise & low-vibration operation Compact size - ideal for tight working areas Technical specifications Load capacity: 500 kg Weight: 209 kg Tilt drive: Hydraulic Dodsufx Utopfx Ak Ajkw Motor: 48V electric motor 1000 Watt 4 lead acid batteries (á 12V, 32Ah) Battery life: 8 - 10 hours Charging time: 6 - 7 hours to 100% charge Speed: Forward 1st gear: max. 3.3 km/h Forward 2nd gear: max. 4.2km/h Forward 3rd gear: max. 5.0km/h Reverse: max. 1.5km/h Overall dimensions: 173cm x 77 cm x 103 cm Tank dimensions: 1061mm x 674mm x 670mm Container water capacity: 150l Load volume (depending on filling) up to 500l The SCHORR electric dumper is ideal for transporting heavy loads and solid materials (e.g. stones, sacks, pallets, etc.). With a load capacity of 500 kg, this wheelbarrow with electric motor is a real powerhouse that can also handle larger loads effortlessly and, above all, quietly. Thanks to the hydraulic tipping trough with a large tipping radius, you can unload your load easily, quickly and completely. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We will be happy to answer any questions you may have about our electric motorized wheelbarrows. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, Year of construction: 2002, Technical details: x-travel: 1500 mm z-travel: 1300 mm control: YASNAC XRC Steuerung total power requirement: 3,3 kVA Total weight, approx.: 3.200 kg Welding robot plant consists of: -welding rectifier MESSER, type Phoenix 500TG; MIG-MAG / TIG and E-welding up to 500A; air cooling; protection class IP 23 -Wire feed EWM, type Phoenix Drive 4 ROB WE, wire Ø 1,0 - 1,2mm, feed 0,5 - 24 m/min., protection IP 23 -MIG/MAG gas shielded welding torch BINZEL for wire Ø 0,8 - 1,6mm -Robot ERCS UP6-RE00 with control YASNAC XRC control, travels Y-way=1.500mm and Z-way=1.300mm, circular movement swivel=approx. 90° right/left, swivel radius=1.000mm, turn 360°, welding gun rotate 360° with projection max/min: 1.500 / 500mm -1x control cabinet L:900 x W:900 x H:2500mm -1x control cabinet ERCS-UP6-RE00, control 4.0 XRC, L:610 x W:800 x H:900mm -1x welding table L:4.400 x W:550 x H:1.100mm, with compressed air connection 10 bar, working area LxW 1.200 x 340mm, X-way 3.250mm. furthermore: 1x straightening station DETEC manufacturing (with working table and straightening unit) 1x butt welding station with feeding table Dsdju R Dfkjpfx Ak Askw i.D. *

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 5 h, cutting height (max.): 490 mm, cutting width (max.): 750 mm, roller diameter: 540 mm, pivoting range: 60 °, Like-new machine with only 5 operating hours! TECHNICAL DETAILS Cutting width: max. 750 mm Cutting height: max. 490 mm Roller diameter: 540 mm Swiveling range: 60° Table height: 800 mm Cutting diameter at 90°: max. 540 mm Rectangular cutting area at 90°: 750 × 490 mm Swiveling range: up to 60° in both directions Saw blade dimensions: 6,880 × 41 × 1.3 mm Saw blade speed: 15–150 m/min Djdpfx Aj Aggc Iek Ajkw Drive power: 5.5 kW Speed: max. 150 rpm Speed: min. 15 rpm Type of operation: electric MACHINE DETAILS Control type: PLC-controlled Input voltage: 400 V Input frequency: 50 Hz Input current type: three-phase Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,500 x 2,000 mm Total weight: 2,370 kg Operating hours: 5 h EQUIPMENT Lighting Documentation / Manual CE marking

Year of construction: 2026, condition: new, Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories: Total enclosure, SK 40 or 50 workpiece carrier according to preference, Cooling unit for dielectric, Automatic fire extinguishing system, Measuring probe, SK 40 or 50 measuring mandrel depending on workpiece carrier, Alphanumeric keyboard for data management, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes, Software package for profile tools, 4-path program for peripheral electrodes, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries, Automatic central lubrication, 1 short dressing holder, Dkjdpsy T It Esfx Ak Ajw 1 mounting flange for erosion wheel. Machine is brand new!! Originally packed and full warranty from Vollmer! Cutter outer diameter: max. 250 mm Shank tool diameter: from 10 - 100 mm Outside diameter of disc-shaped tools: 380mm cutting length: Max. 20 mm Cutting length: Max. 20 mm Tangential clearance angle: max. 6 ° Radial clearance angle: -15° to + 6° Chamfering: automatic max. 70° X axis travel: 280 mm Z-axis travel: 330 mm workpiece carrier cone: SK 50 Y axis travel: 280 mm Workpiece carrier cone: SK 50 A-axis rotation range: 360° B-axis swivel range: +/- 30 ° Tool weight max: 20 kg clearance angle: 30° Dimensions L x W x H: = 1905 x 2520 x 2430 mm Connected load: 3.4 kW (400 V / 50 Hz) colour: grey RAL7045 / RAL 7047 Diameter of rotating electrode: Max. 150 mm Rotational electrode speed: 80 - 1500 rpm weight: approx. 3000 kg

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Holp Vario Bucket / VL.112.421 / incl. swivel drive / RotoTop 121 / MS08 / HARDOX / NEW / in stock & immediately available Price: €13,020.00 net / €15,493.80 gross - Excavators from - to: 7 tons – 14 tons - Weight approx.: 460 kg - Capacity SAE: 400 liters - Angle of repose: 54 ° - Radius of bucket bottom: 150 mm - incl. Holp RotoTop 121 swivel drive - The bucket is made entirely of HARDOX. Advantages of the Holp Vario Bucket: - Large surface area - Robust design with high-quality materials - Minimal weight due to optimized triangular construction Dksdpjyhymcefx Ak Aow - Round bottom - Two working openings - Rectangular working opening - V-shaped - The Vario bucket impresses with its high performance and clean operation. It enables precise dumping through the V-shaped opening and offers very high digging performance in dragging mode. Wherever more speed and flexibility are needed for handling a wide variety of tasks, the Vario bucket is a real asset on the construction site: It is faster, more adaptable, and safer. We have many other Holp products in our warehouse that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sales excepted! = More information = New: Yes Intended use: Construction Unladen weight: 460 kg Please contact Marius Herden for further information.

Condition: new, thread dia. bis M 24 turning speeds max. 280 U/min thread M5 - M24 working area 2050 Rmax. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3.0 kW weight - pallet system 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame Djdpfey Umdlex Ak Askw * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to "DIN 376" . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head can be fixed with magnetic quick-action insert

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 - Machine number: 30012 - Bending angle: approx. 140° - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m - Electrical connection: Three-phase 230 V/400 V – 1.5 kW Dsdpfx Akjz Akgwj Aekw 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° - Galvanized steel sheet up to 1.0 mm - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment.

Condition: used, maximum load weight: 31,000 kg, overall weight: 45,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space width: 2,550 mm, loading space height: 300 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2026, Equipment: ABS, DOLL tera 2-axle low-bed semi-trailer with trailing axles New vehicle, first registration June 30, 2026 Unladen weight 13,950 kg Permissible total weight (technical) 45,000 kg Gooseneck length 3,070 mm Saddle height 1,200 to 1,280 mm Swivel radius 2,350 mm Low-bed length 6,800 mm Telescopic extension length 5,700 mm Rear axle bogie length 2,700 mm Width of excavator arm recess 700 mm Depth of excavator arm recess 550 mm Loading height of low-bed 300 mm Loading height above the chassis 955 mm Width of the semi-trailer 2,550 mm Hydraulic suspension -70 / + 530 mm Technical maximum saddle load 21,000 kg Axle load 24,000 kg Detachable gooseneck with external main frame Painting of the semi-trailer in 3 layers including hot-dip galvanizing Doll Tronic CAN-bus system Floor in the low-bed: 45 mm spruce wood planks between the flatbed frames 24-volt E-hydraulic system Control of trailer functions with DOLL keypads on the gooseneck AUXILIARY STEERING with REMOTE CONTROL EEG electronic single-lane guidance during straight-line driving LaSi in the low-bed: 7 pairs of swivelable lashing points, 13,400 daN lashing force 5 pairs of frame pockets in the outer frame 3 pairs of M36 threads externally for screwing in lashing brackets DOLL tera chassis with trailing axles and hydraulically suspended BPW axles Dkedpfxozmqmxo Ak Asw All axles are hydraulically steered with a maximum steering angle of 60° on the last axle All lubrication points are connected to the central lubrication system WABCO trailer EBS with ABS and RSS Aluminum air tank BEKA-MAX central lubrication system on the front and rear units Overwidth package with foldable loading area extensions 2x 225 mm, extendable warning sign package up to 3,200 mm width Tires 8x 245/70 R 17.5 RENTING is the new BUYING, with us, also available in full-service rental IMMEDIATELY-----