Used Swivel Radius for sale (5,431)

Condition: used, Year of construction: 2011, Overview This Krones AirCo is an air conveyor for empty PET bottles, built at the end of 2011. The bottles hang by their neck ring and are driven by air from fan units along the conveyor. The installation runs over a total length of approx. 60 m with seven fan units, curves, a diverter and several declining sections. The conveyor sections hang from stainless steel support stands and run at ceiling level across the hall, so the floor beneath stays free for traffic and other machines. Technical data - Manufacturer: Krones - Model: AirCo - Year of manufacture: 2011 Iodjz I Tbrspfx Ap Djih - Machine type: air conveyor, neck handling of empty PET bottles - Total conveyor length: approx. 60 m - Declining sections: 10 sections at 10°, approx. 16.8 m in total - Curves: 8 with radius 750 mm - 90° 2 x left, 2 x right; 45° left; 30° left; 15° left; 15° right - Fan units: 7, each with filter housing - Diverter: 1 Conveyor sections In the order of the plant layout: - Fan unit - Straight section 3,500 mm - Straight section 500 mm - Curve 45° left, radius 750 mm - Straight section 400 mm - Straight section 2,000 mm - Straight section 2,000 mm - Fan unit - Straight section 2,000 mm - Straight section 1,000 mm - Straight section 400 mm - Straight section 300 mm - Curve 30° left, radius 750 mm - Straight section 2,000 mm - Straight section 600 mm - Straight section 400 mm - Curve 15° left, radius 750 mm - Straight section 1,500 mm - Straight section 600 mm - Straight section 500 mm - Fan unit - Straight section 1,500 mm - Curve 15° right, radius 750 mm - Straight section 2,000 mm - Straight section 500 mm - Straight section 600 mm - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Declining section 2,000 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,500 mm at 10° - Straight section 1,500 mm - Curve 90° left, radius 750 mm - Straight section 1,500 mm - Fan unit - Straight section 2,000 mm - Straight section 2,000 mm - Straight section 400 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 750 mm - Straight section 400 mm - Fan unit - Declining section 2,000 mm at 10° - Declining section 750 mm at 10° - Declining section 2,000 mm at 10° - Declining section 1,000 mm at 10° - Declining section 2,000 mm at 10° - Fan unit - Straight section 1,000 mm - Diverter - Curve 90° left, radius 750 mm - Fan unit - Straight section 2,000 mm - Straight section 750 mm - Curve 90° right, radius 750 mm - Straight section 1,500 mm - Straight section 720 mm Equipment - Stainless steel conveyor channels with neck guide rails - Stainless steel support stands and ceiling suspensions - Fan units with air filters - Sensors and pneumatic components along the conveyor - Plant layout drawing of the installation Condition Used, currently installed in the plant. The bottle unscrambler visible in some photos is not included. Dismantling and the exact scope of delivery are agreed during the offer stage. Availability Available immediately. Location: Germany.

Year of construction: 1999, condition: used, Adjustment of the milling stop: via handwheel Milling stop scale display: digital display Iijdpfxoz I Iu To Ap Djh Adjustment of the milling vice: handwheel Milling vice scale display: digital display Swiveling mechanism: yes

Condition: used, Year of construction: 1998, Number of spindles in the hole row: 11 Number of horizontal spindles: 3 Iisdjz I Ivdopfx Ap Deh Pot-band drilling head: yes, Hettich Drill spacing: 32mm Power consumption: 2.2kW Drilling unit: swiveling

Year of construction: 1999, condition: used, 1 unit of SCHECHTEL HA200 swivel bending machine Iedpfjz I Nqcox Ap Doih Processing length: 200 cm Color: as shown in the pictures, according to the images and on-site inspection Year of manufacture: 1999 Condition: used Location of the goods: workshop Payment method: prepayment by bank transfer Shipping: Self-collection only from the Bischofswiesen location

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2018, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2018, Container No. G0123022 - Manufacturer: Kögel. * Sliding roof tarp * Double corner brackets * Insert strip (wood) Iodpfjz N Rc Djx Ap Djih * Outline marking, side/rear * Load certificate Code-XL * Multi-hole strip * Portal door with double swivel rod locks (inside) * Side sliding tarp * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points * Perforated pallet stop strip Used roof tarp. Financing available upon request. Financing possible. Delivery time: IMMEDIATELY. Multi-lock outer frame. Used tarp. Technically ready for use without further repairs. Substructure with signs of wear. Valid UVV certification. UVV documentation available. Swappable container with markings (see photos). LASI CODE XL!!! Dimensions are approximate. Offer subject to change; we reserve the right to sell in the meantime. Prices are net, ex works D-59302 Oelde. Further details available upon request by telephone or email.

Condition: like new (used), functionality: fully functional, Year of construction: 2017, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, PIPE BENDING MACHINE WITH ERCOLINA MANDREL, MODEL TOP 030, THREE-PHASE, WITH MANDREL + ERCOLINA AUTOMATIC LOADER, MODEL 030 A3 H76 Machine in like-new condition, CE certified Minimum outer diameter: 10 mm Maximum outer diameter: 76 mm Iijdoz Nf Dcspfx Ap Deh Maximum bending radius (CLR): 200 mm Minimum bending radius (CLR): 20 mm Maximum bending angle: 210° Installed power: 4.2 kW Tank capacity: 15 l hydraulic oil Noise level: 65 dB Dimensions (Length x Width x Height): 4000 x 950 x 1250 (3 m) Weight: 850 kg (3 m) FEATURES •FST closing system (Patented) with an auxiliary system for stabilizing the hydraulic pressure of the sliding carriage. •Display screen for digital visualization of the carriage’s forward movement (Y1 axis) and rotation (B axis). •External pressure gauges to facilitate system setup and closing pressure adjustment. •Variable bending speed up to 4 rpm. •3-meter mandrel bench. •Pneumatic spindle.

Condition: used, mileage: 164,000 km, power: 310 kW (421.48 HP), first registration: 11/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total length: 11,600 mm, total width: 2,550 mm, total height: 3,720 mm, loading space length: 9,428 mm, loading space width: 2,470 mm, loading space height: 2,200 mm, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, tail-lift, We are very pleased that our offer has aroused your interest and would like to assure you that you can purchase a good and affordable vehicle with a comprehensible service history at our company! Iiedpfxey Ng N Dj Ap Dsh Certified Oren Topliner with swivel wall body and rear cargo securing Tail lift BÄR 2,500 KG STEERING AXLE Rear view camera Navigation system FULLY AIR-SUSPENDED 23 EURO parking spaces Special equipment: Storage compartment in the center tunnel, front axle load 8.0 t, equipment package: Driving, sun visor for side windows, driver and passenger door, sun visor for side window, driver's door, exterior mirror camera MirrorCam, battery 220 Ah (AGM), CB radio, cockpit multimedia system, interactive, navigation system, remote monitoring function Remote Online, air horn, driving assistance system: turning assistant, cab: steel-sprung, comfort, vehicle without rear underrun protection, transmission 12-speed - type: G 211-12, fenders 3-piece, fenders 3-piece with splash guard, fuel tank: 390 liters aluminum, left, air intake from the front, air deflector on the roof (lockable), trailing axle 7.5 t, steered, unladen, liftable, wheelbase variant 5800 mm, frame overhang 2850 mm, reversing warning system, audible and flashing lights (external warning signal), switch for tail lift, interface for fleet management system, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver seat velour, seats in the cab: driver's seat comfort suspension seat, exterior sun visor, 12V / 15 A socket in the passenger footwell additionally, 24V socket in the passenger footwell additionally, preparation for 4 surround cameras (display in the on-board monitor) Additional equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 5, Actros cab S / M, heated approach / front mirrors, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pole, exhaust to the right outside, exhaust system two-piece, batteries arranged side by side, differential lock rear axle, torque increase 12th gear, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic activation for driving lights (light sensor), cab: cab entrance fixed, cab: tilting mechanism hydraulic, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: height 600 mm, cab variant: M, stowage compartment outside left, stowage compartments with lid behind driver and passenger seat, air intake behind the cab, vehicle outline lights LED, suspension: air / air (fully air-suspended), power windows, windshield tinted, vehicle without rear window, generator 100 A, speed limiter, urea tank (AdBlue): 60 liters, rear axle differential 440, body / superstructure: chassis, comfort central locking, steering power pump unregulated, steering oil cooler, air compressor 2-stage, air dryer heated, engine 12.8 liters - 310 kW R6 diesel (OM 471), engine brake, engine variant OM 471, type of use: local transport, wheelbase not defined, ramp mirrors, waste heat utilization, disc brakes front and rear axle, key with remote control (2), side marker lights LED flashing, seats in the cab: passenger swivel seat, splash guard front, front axle stabilizer, additional stabilizer, rear axle / trailing axle, 12V socket in the passenger footwell, tachograph / EC control unit, Truck Data Center 7 (fleet management system), front underrun protection, preparation for

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush shafts are equipped as standard with alternating plastic and wave wire discs to achieve the best possible sweeping performance, even with heavy and stubborn dirt. ? Dücker FKM 2400 ? With municipal mounting plate receiver ? Implement plate size 3 and 5 ? Very little use, always stored in a shed ? Working width 0°. 2,400 mm ? Working width 15° 2,300 mm ? Working width 30° 2,075 mm ? Sweeper roller diameter: 600 mm ? Hydraulically raise/lower ? Hydraulically swivel right/left ? 2x water tank ? Water spray ? Support wheels ? Support Manufactured with a stable, torsion-resistant housing with double-walled construction. The sweeping roller is suspended and adjustable in height, with stepless adjustment, and consists of disc brushes in plastic/wave wire, 600 mm Ø, with heavy-duty wheels 250 mm Ø directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Implement plate size 3 or 5, including cylinder Drive, hydraulic, minimum oil flow at 180 bar: 40 l/min Isdpfx Apez Ta Rxj Djih Weight: 580 kg Additionally with: Hydraulic tilting of the brush right/left Water spray device in front of the brush Boundary lights LED and warning flags Changeover valve, electric Financing is possible through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, or errors. We strongly recommend and encourage an inspection and examination so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Year of construction: 1973, condition: used, Rated voltage: 380V AC, rated power: 2.4kW, rated current: 12A, components: grinding wheelhead, workpiece headstock, internal grinding attachment, machine bed, longitudinal slide, coolant system, collection tray, pneumatic system, swiveling grinding head, grinding wheel guard, metal protective covers. An on-site inspection is possible. Ijdpfx Asz S Iw Rsp Dsih

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152-010 564, Offer 26317 Technical data: - Electric wire rope hoist ABUS, operation via floor-mounted remote control - Load capacity 3200 kg - Lifting speeds 0.7 / 4.0 m/min - Motorized trolley travel speed 5.0 / 20.0 m/min - Motorized slewing speed 0.15 / 0.61 RPM - Outreach 5000 mm - Hook height approx. 3000 mm - Bottom edge of boom approx. 3690 mm - Boom IPE 550 - Overall height approx. 4300 mm - Column diameter approx. 540 mm - Slewing radius 360 ° Iiedpsz S H Alsfx Ap Doh - Power supply 400 V - Total weight approx. 2000 kg

Condition: used, Year of construction: 2015, turning diameter max. 500 mm turning length 800 mm control sl Operate 3G ShopTurn Siemens swing diameter 500 mm distance between spindles 1.020 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 34 kW max. Torque 280 / 380 Nm spindle head 170h5 spindle diameter in front bearing 130 mm spindle bore 87 mm C-Axis 0,001 ° tool taper HSK 63 A number of toolpositions 80 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool weight 12 kg max. tool length 300 mm Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 19 / 22 kW Torque 85 / 100 Nm tool taper HSK 63 A B-Axis +/- 110 ° x-axis -10 ... +490 mm y-axis +/- 100 mm z-axis 1: 845 mm z-axis 2: 600 mm z-axis 3: 800 mm Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 20 / 27 kW bar material dia. 51 mm spindle bore diameter 73 mm spindle diameter in front bearing 100 mm C-Axis 0,001 ° total power requirement 85 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 7,0 x 2,9 x 2,6 m CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 TC V6 - 5-axis simultaneous machining - Main and counter-spindle - Swivel-type milling spindle - ShopTurn - Off-center turning and milling - Multi-thread cycle - Program state control - Tool sorting cycle - Easy Tool Monitor for Siemens control system - Chuck flushing system for main spindle Iiodjz S Nygspfx Ap Deh - Chuck flushing system for counter-spindle - Differential pressure clamping - Coolant supply through the counter-spindle - Bar machining package for CTX beta (77 mm capacity) Workpiece the-take-off device (left side) Hydraulic hollow clamping system 4-color signal tower Interface for bar feeder or bar magazine - In-process workpiece measuring system (Renishaw) - Safety window cleaning system - Coolant spray gun

Condition: used, Edge sanding machines OTT S30 – 20 m/min Manufacturer: OTT Type: S30 Condition: Used Location: Rattelsdorf warehouse Machine description For sale is a used OTT S30 edge banding machine for professional edge processing in the wood and furniture industry. The machine features various processing units for efficient edge processing and is suitable for use in furniture production as well as in wood processing companies. Equipment and functions * Edge banding * Trimming * Flush trimming * Radius milling (R = 2 mm) * Scraping blade * Quick heating tank * Glue tank for granules * Feed rate: approx. 20 m/min Technical data Iiedpfx Asz S Nuksp Dsh * Machine length: approx. 4,500 mm * Year of manufacture: unknown * Machine condition: used

Condition: new, Multi-function machine with aluminum sliding table for sawing, milling, planing/thicknessing, and optional long-hole drilling. torsion-resistant, steel-cast iron construction machine table made of cast iron, hardened and ground smooth-running, anodized aluminum sliding table, 10-year SCM warranty on wear of the slide guides large fence system with extendable aluminum telescopic stop and folding stops with combination saw-tenon stop with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, swiveling from 90°-45° helical steel infeed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit sliding table with ball contact system equipped with a ball contact system that has proven its worth millions of times permanently smooth running due to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and trapezoidal rail The dust extraction ports for the planer and thicknesser are on the same – right – side. The dust extraction hose can therefore be used for both types of planers from the same side. helical steel infeed rollers for a constant and even workpiece feed massive anti-recoil guards for the operator's safety 3-knife cutterhead ensures an optimal planing result Fencing length 1600 mm max. saw blade diameter with scoring unit 315 mm max. cutting height at 90° / 45° 100/79 mm max. crosscut width to the left of the saw blade 1660 mm cutting width on the parallel stop 800 mm saw blade speed 3500 rpm saw blade tilt 90° - 45° Working width 300 mm planer table length 1260 mm planer shaft diameter / number of planing knives 72 mm / 3 pcs. Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm feed rate 7 m/min Milling spindle diameter 30 mm Useful length of milling spindle 100 mm max. tool diameter 180 mm, can be countersunk Iedsiiyppspfx Ap Doih Spindle speed 3500/600/800 rpm Motor power 3 x 4 kW, 400 V, 50 Hz Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Weight 430 kg OPTIONS: - Professional stops EUR 300.— Saw stop with quick-release lock and micrometric adjustment Planer stop with 90° ÷ 45° with continuous adjustment - Scoring unit incl. saw blade EUR 292.— - Handwheel with numerical display for thickness table positioning EUR 129.— - Feed device EUR 119.— - 2 additional handwheels for unit adjustment EUR 45.— - TERSA cutterhead DM 72 mm EUR 212.— - Xylent spiral cutterhead with 3 rows of knives EUR 717.— - Aluminum long-hole drilling device EUR 390.— - 2 stop flaps on the crosscut fence EUR 150.—

Condition: used, Year of construction: 1993, Used Machine Year of manufacture: 1993 Features and technical specifications: - Machine bed cast entirely from gray iron in a single piece - With wide table supports and dovetail guides for the vertical slide - With control panel above the table - Interchangeable spindle with MK 5, 30 mm diameter - Milling spindle swivel angle: 45°/22.5° - 2 motors: 5.5/7.5 kW – 400 V - 4 speeds without belt change: 3000–4500–6000–9000 rpm - Cast-iron table with table top extensions on both sides, 2150 mm - Solid cast-iron milling stop with quick adjustment (overall) and individual adjustment for both jaws - ELGO 89P23 control unit for height, tilt, and stop - Program memory for 99 programs - With sliding table insert Iijdpfxjzyy Dtj Ap Doh - With Maka 4-roller feed unit - Dimensions L x W x H approx. 2150 x 1430 x 1740 mm - Weight approx. 1450 kg

Condition: used, Bernardo Type T 1000S swivel-spindle router for versatile routing work on solid timber, sheet materials and profiles. The machine is ideal for joinery and carpentry workshops requiring precise and high-performance milling solutions. Featuring a swivelling spindle, sliding carriage, angle stop and pneumatic hold-down device. Technical data: - Milling spindle diameter: 30 mm - Speed ranges: 1400 / 3500 / 6000 / 800 rpm - Clamping length: 125 mm Iodpfozryqkjx Ap Doih - Motor power: 4.0 kW

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2018. It features an impressive X-axis travel of 670 mm, Y-axis travel of 830 mm, and Z-axis travel of 600 mm. The machine includes a robust table diameter of 800 mm and a high spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details. - Swivel Range (B/A Axis): -120 to +120 degrees- Rotary Table (C Axis): 360 degrees continuous- Table Diameter: Kessler table 800 mm- Tool Changer Capacity: 96-fold- Measuring Systems: Heidenhain linear measuring system (X, Y, Z) with sealing air, Heidenhain rotary measuring system- Internal Coolant Supply (IKZ): 20 bar with belt filter unit and coolant temperature control- Hydraulic & Pneumatic Interfaces: 3-way hydraulic connection & 1-way air connection in table center, hydraulic unit controlled via M-function- Spindle/Axis Cooling: Regulated spindle cooler, active air-air control cabinet cooler, controlled oil cooling for 4th and 5th axis- Additional Features:POS Kinematic module with reference spherePOSkontur contour protectionPOS DCM collision moduleexternal hinged-belt chip conveyorchip flushing device Iijdpfxsz Nf Uhe Ap Djh Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2021, HT45-G3-SM2Y/FANUC WITH POWERED TOOLS AND Y-AXIS CNC turning machine for complete machining of turning-milling parts with 2 spindles, 2 tool systems, 6 linear axes and 2 rotary axes, integrated spindle motors on main and counter spindle (water- cooled), pre-tensioned roller guides. Drive power: Main spindle - 15 kW Counter spindle - 15 kW Speed range: Main spindle 0 – 7000 min-1 Counter spindle 0 – 7000 min-1 Spindle connection (DIN 55026): Main spindle: KK 5 (max. bar diameter ø 45 mm) Counter spindle: KK5 Ijdpfxez Rzh Hs Ap Deih Y-axis: • Travel range: +40/-40 mm • Rapid traverse speed: 15 m/min Includes: • Draw tube on the main spindle • Pull rod for the main/counter spindle • Mechanical spindle brake (main/counter spindle) • Part ejector and flushing through the counter spindle • Fanuc 31i-B control - EMCONNECT/APP based user interface - Manual Guide i dialog programming - 22" Multi-Touch Display - USB interface - Network drive / Ethernet - 3D Simulation - LED status bar, and more • 2x 12-position tool turret VDI 25 radial with direction logic for up to 2x12 powered tool stations (HSC turret)! Swivel speed adjustable with feed switch! Performance data: - Max. speed: 8000 rpm - Max. continuous speed: 6000 rpm - Max. drive power: 4 kW - Max. torque: 16 Nm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming • Chip conveyor with a discharge height of 1100 mm, programmable (Type "hinge belt") • Coolant system integrated in the chip conveyor 2 high-pressure pumps with 14 bar 2 flushing pumps with 3.7 bar • Air gun with spiral hose • LED machine room light • Hydraulic unit • Vibration-damping leveling feet • Mounting angle and high-performance anchors • Documentation / CE certificate Year of construction: 2021 Machine no. S3K212051 Includes: various accessories

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), fuel tank capacity: 15 l, color: grey, empty load weight: 1,200 kg, shovel volume: 0.3 m³, operating hours: 1 h, The YAMA S15 LITE crawler excavator – modern, professional, and durable. The YAMA S15 LITE model is the ideal machine for demanding construction, electrical, plumbing, and renovation companies as well as service providers in similar sectors. The YAMA S15 LITE is also equipped with a swing boom, significantly facilitating work in confined spaces. We also offer post-warranty service support. The mini excavators are designed and manufactured under the supervision of European engineers. The robust construction ensures reliable operation under all conditions. TECHNICAL DATA: Operating weight: 1,200 kg Bucket volume (set with 3 buckets): 0.03 m³ Engine model: LAIDONG Engine power: 18.4 kW / 25 HP Number of cylinders: 3 Oil cooler: Yes Swing arm: Yes Extendable tracks: No Max. gradeability: 35° Pump type: Gear pump System pressure: 16 MPa Hydraulic flow: 25 l/min Max. travel speed: 2 km/h Platform rotation speed: 9–10 rpm Digging force: 13 kN Ground pressure: 30 kPa Iiedewzh A Nepfx Ap Deh Fuel tank capacity: 15 l DIMENSIONS: Overall length: 2,870 mm Overall width: 1,000 mm Overall height: 2,150 mm Blade width: 1,000 mm Blade height: 220 mm Track gauge: 800 mm Track width: 180 mm Ground clearance: 380 mm Standard bucket width: 380 mm Total track length: 1,300 mm WORKING RANGE: Max. digging height: 2,740 mm Max. dumping height: 1,750 mm Max. digging depth: 1,800 mm Max. vertical digging depth: 1,320 mm Max. reach at ground level: 2,400 mm Minimum swing radius: 1,550 mm Max. digging radius at ground level: 3,227 mm Max. blade lift height: 325 mm Max. blade lowering depth: 175 mm PRICE: €10,400 net €12,376 gross

Condition: new, functionality: fully functional, power: 15 kW (20.39 HP), fuel type: diesel, empty load weight: 2,700 kg, The modern VIP27 mini excavator is a professional, durable machine. The VIP27 model is the ideal choice for demanding construction, electrical, plumbing, renovation companies, as well as service providers in related industries. The VIP27 is additionally equipped with a swing boom, significantly facilitating work on confined job sites. The machine is also fitted with extendable tracks, ensuring improved stability and flexibility. We offer reliable after-sales support. The mini excavators are manufactured based on and under the supervision of European engineers. The machine is built on a robust chassis and is suitable for use under all conditions. TECHNICAL DATA: Model: VIP 27 Operating weight: 2,700 kg Bucket capacity: 20, 40, 100 liters Engine model: YANMAR Engine power: 15 kW Number of cylinders: 3 Oil cooler: Yes Swing boom: Yes Extendable rubber tracks: Yes (1.3 m–1.5 m) Max. gradeability: 30% Pump type: Piston pump Hydraulic pressure: 20.6 MPa Hydraulic oil flow: 36 l/min Travel speed: 2.6 / 4.5 km/h Slew speed: 9.5 rpm Max. digging force: 19.5 kN Tank capacity: 26 l DIMENSIONS: Overall width: 1,500 mm Overall height: 2,450 mm Overall length: 3,200 mm WORKING RANGE: Max. digging depth: 2,430 mm Max. dumping height: 2,610 mm Max. digging reach: 4,136 mm Max. ground reach: 4,100 mm Minimum swing radius: 750 mm 2-speed travel Heater Radio Fan PRICE: €21,000 net €24,990 gross KINGWAY DEUTSCHLAND is the sole stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge stock of machines, with around 100 available at any given time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries. We also offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Ijdpsw Ufwvefx Ap Djih Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: new, functionality: fully functional, wheelbase: 189 mm, Scissor lift – High quality and reliability. The scissor lift is the ideal solution for all work at heights, offering safety, stability, and ease of use. Thanks to its compact design, it is suitable for both indoor and outdoor use. - High load capacity and stability – allows for work even with heavier equipment. - Easy operation – intuitive controls for maximum comfort. - Versatile applications – construction work, warehouse work, maintenance work, and much more. - Robust construction and durability – reliable operation for many years. Invest in a modern solution that will increase your work efficiency! Contact us to learn more about available models and delivery options. DIMENSIONS: Maximum working height: 8.00 m / 10.00 m / 12.00 m / 13.80 m Maximum platform height: 6.00 m / 8.00 m / 10.00 m / 11.80 m Platform size (length × width × height): 2.26 x 0.81 x 1.1 m / 2.26 x 0.84 x 1.1 m / 2.29 x 1.12 x 1.1 m / 2.29 x 1.12 x 1.1 m Overall dimensions (length × width × height, railing not folded): 2.48 x 0.84 x 2.21 m / 2.48 x 0.84 x 2.32 m / 2.48 x 1.19 x 2.46 m / 2.48 x 1.19 x 2.58 m Overall dimensions: (length x width x height, with railings folded) 2.48 x 0.84 x 1.73 m / 2.48 x 0.84 x 1.85 m / 2.47 x 1.19 x 1.95 m / 2.47 x 1.19 x 2.07 m Platform extension: 0.9 m Minimum ground clearance: 0.1 / 0.02 m Iisdjv T I N Ispfx Ap Djh Wheelbase: 1.89 m Machine weight: 1880 kg / 230 kg / 2540 kg / 2880 kg PERFORMANCE: Rated load: 380 kg / 230 kg / 320 kg / 320 kg Safe working load of extended platform: 113 kg Turning radius (inside wheel/outside wheel): 0 / 3.1 m Lift/Travel Motor: 24V/3.3kw / 24V/3.3kw / 24V/3.3kw / 24V/4.5kw Lifting Speed: 3-5m/min Travel Speed (folded): 3.5km/h Travel Speed (extended): 0.8km/h Maximum Gradeability: 25% Maximum Permissible Working Angle: 1.5°/3° Tires: 381x127 mm Battery: 4x6V/200ah / 4x6V/200ah / 4x6V/200ah / 4x6V/240ah Lithium Battery (optional): 24V/230ah Charger: 24V/30A KINGWAY GERMANY is the only stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on-site. We are the largest importer of construction and agricultural machinery in Europe and the headquarters of Kingway in Germany. We have a huge selection of machines in stock, with around 100 available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we also offer our customers access to all spare parts and mobile service. KINGWAY GERMANY Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Condition: used, Year of construction: 1980, workpiece length 2700 mm swing dia. 630 mm clamping length 2700 mm stroke position adjustment 40-130 mm grinding wheel diameter 1000 mm weight of the machine ca. 18,5 t dimensions of the machine ca. 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools steady rest jaws diverse irrigation nozzle (workpiece cooling) Iiedpoyukdzjfx Ap Doh washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, fuel type: diesel, fuel tank capacity: 120 l, lifting height: 6,900 mm, Year of construction: 2022 Operating hours: 2.650 Empty weight: 6.850 kg Iisdpfx Apozxtb Ne Doh Carrying capacity: 3.300 kg GVW: 10.150 kg Dimensions (LxBxH): 474 x 233 x 230 cm Engine type: Deutz Deutz TDL 3.6 L Boom radius: 3.9 m

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Version • Work table 1200 x 600 mm with 4T-slots • Ram travel 750 mm • Drilling spindle SK 40 with tool clamping device • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 T-slots 18 mm on the machine base at the rear • 2 T-slots 18 mm on the machine base on the left • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Protective device • USB interface Dimensions and travels Tool holder SK 40 Isdpfx Aoz S T A Ejp Deih Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance Spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance Spindle bottom edge - min mm 970 Ground max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Machining values Drilling capacity in steel St 60  40 Cast iron GG 22  50 Thread cutting Steel St 60 M 36 Cast iron GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - Servo motor kW 0.25 Y-axis - AC - Servo motor kW 0.25 Z-axis - AC - Servo motor kW 4.50 W-axis - AC - Servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Feed rates, stepless mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis on 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easily readable from all sides, 215 x 160 mm Position data: Cartesian or polar, dimensions absolute or incremental, Unit: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to Machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Machining cycles Standard software options: Programming in dialog, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted start Zero point determination: Cycles to determine zero points by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - aligning castings and forged parts - Angle detection in round parts by probing reference edges or surfaces Test graphic Graphical display of drilling patterns

Condition: good (used), lifting height: 9,030 mm, General information Year of manufacture: 2023 Functional Lifting capacity: 120 kg Working height: 1.103 cm Dimensions of cargo space: 612 x 202 x 268 cm CE mark: yes Condition Technical condition: good Visual appearance: good Iodpfown Hr Asx Ap Doih Other information Delivery terms: EXW Max. horizontal reach: 600 m Additional information Please contact Christian Theißen for more information Manufacturer: France Elevateur Model: Topy 11.1 Year of build: 2023 Condition: Used Data: Max. working height: 11,03 m Max. platform height: 9,03 m Max. reach: 6,00 m Total dimensions LxWxH: 6,12 x 2,02 x 2,68 m Platform dimension WxD: 0,68 x 0,63 m Length of transport position: 6,12 m Height transport position: 2,68 m Max. basket load: 120 kg Swivel range: 2 x 210°=400° Ground clearance: 0,19 m Own weight: 2.623 kg Total permissible weight: 2.743 kg Special features: Trailer hitch, reversing camera, paint in RAL 9003 white, motor start/stop in the work cage, 2x LED beacon + triflash, 2x wheel chocks incl. bracket, socket in the basket, without supports. Information: TÜV and UVV new

Condition: good (used), lifting height: 20,400 mm, General information Year of manufacture: 2016 Mileage: 126.116 km Weights Empty weight: 3.260 kg Functional Lifting capacity: 200 kg Working height: 2.240 cm Working width: 352 cm Dimensions of cargo space: 647 x 212 x 300 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1420 m Max swing of arm in degrees: 225 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: TB 220.2 Year of build: 2016 Iijdpfxjxrtbpe Ap Deh Condition: Used Data: Max. working height: 22,35 m Max. platform height: 20,35 m Max. reach: 14,18 m Total dimensions LxWxH: 6,47 x 2,12 x 3,00 m Platform dimensions LxW: 1,37 x 0,66 m Max. basket load: 200 kg Swivel range: 225° Ground pressure: 27 kN (vorne) / 16 kN (hinten) Ground clearance: 0,16 m Support width vertical: 2,12 m (vorne) / 2,12 m (hinten) Support width one side: 2,82 m (vorne) / 2,73 m (hinten) Support width both sides: 3,52 m (vorne) / 3,34 m (hinten) Support length: 4,15 m breit/ 3,19 m schmal Own weight: 3.260 kg Total permissible weight: 3.500 kg Special features: Rotatable work basket 2x55°, maximum setup tilt 5°, loading area with tailgate 1.05 x 2.13 m. Information: Tüv and UVV new Location: 41468 Neuss: immediately available