Used Tapping for sale (908)

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Ksdpfx Aouw Dnxjb Usnd

Condition: refurbished (used), Spako 225 litre electric heating, thermal oil Jacket vessel With strong agitator, scrape sides Kedexwlk Hjpfx Ab Uend Tap discharge Piped to hot depositor for set weights and then clipped Complete system being refurbished.

Condition: good (used), 1 used coordinate centering tapping and drilling machine Make: Hartkämper Model: S 35-100 Technical specifications: Max. drilling capacity: 18 mm Tapping capacity up to M 10 Drilling depth: 90 mm Throat depth: 215 mm Ksdpfx Absxuqd Ts Usnd Spindle-table distance: 150-450 mm Column diameter: 75 mm On coordinate table with Heidenhain digital readout for X and Y axis Measuring length X axis: 1000 mm Dimensions (machine footprint): Length: 1360 mm Height: 1700 mm Depth: 1000 mm

Condition: ready for operation (used), chuck outer diameter: 700 mm, total height: 3,415 mm, controller model: Siemens 840D Solution Line, empty load weight: 17,000 kg, Type: Ultrix 800 RT The Ultrix 800 RT is a multifunction machining center with 5 interpolated axes and a moving gantry for high-speed milling, turning, grinding, drilling, tapping, finishing, deburring, and roughing of complex parts. When used for turning vertical lathe: - swivel range: 1100 mm - maximum weight of the workpiece: 700 kg - 40/30 kW on the table - max. torque on the table: 1500 Nm - maximum speed of the table: 1000 rpm !! - hydraulic clamping on table Kedextgkaspfx Ab Uend - tool taper for turning: KM63 - 150-position tool changer with 24 tool positions for turning When used for milling, grinding, drilling, ... machining center: - X-axis: 800 mm - Y-axis: 900 mm - Z-axis: 600 mm - A-axis: -30° / 110° - C-axis: continuous - maximum weight of the workpiece: 700 kg - 55/40 kW on spindle - max. torque on the spindle: 22 Nm - max 40,000 rpm - tool taper for milling: HSK-E40 - 150-position tool changer with 126 tool positions for milling, grinding, drilling List of options mounted on the machine: 1 - 40,000 rpm high-speed spindle 2 - table dia 700 mm with hydraulic clamping 3-150-position tool changer 4 - chip conveyor belt 5 - cooling system with recovery 6 - coolant temperature control 7 - high pressure cooling (40 to 70 bar) by spindle 8 - smoke extraction system 9 - chip collection box 10 - Presetting system and tool integrity: laser and mechanical probe for measuring tools 11 - Renishaw probe Max turningdia -- passage: 1100 mm Power on the spindle: 40/30 kW Long: 4655 mm Wide: 5890 mm Turret: yes Qty Tools: 150 positions Coolant pump: yes

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition Knsdjwk Nxqjpfx Ab Uod

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Chip conveyor, Bar feeder interface, Tooling, EIA ISO, Rigid tapping Ksdpfjxykpajx Ab Uond

Condition: good (used), Year of construction: 2006, operating hours: 93,050 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, controller manufacturer: Fanuc, controller model: 15i, workpiece weight (max.): 5,000 kg, table width: 1,000 mm, table length: 1,000 mm, table load: 5,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, number of spindles: 1, number of slots in tool magazine: 120, tool length: 470 mm, tool diameter: 380 mm, tool weight: 15,000 g, Equipment: chip conveyor, documentation/manual, Horizontal machining center 4 axes / 4th axis resolution 0.001mm Spindle speed 8000 rpm Knsdjxxt Ucjpfx Ab Ujd 2 gear stages ATC with 120 tool pockets Tool holder: MAS BT50 / pull stud Mitsui Direct measuring systems X / Y / Z / B Coolant supply: external / internal / Niagara Rigid tapping function Travel paths: X=2000mm Y=1500mm Z=1200mm Interference circle: 2000mm Scraper belt conveyor Knoll type 340 K-1 Filter system Knoll type SF1000/Turbo 2 Filter system footprint: 2500 x 1400 x 2400mm

Condition: good (used), Year of construction: 2001, operating hours: 5,000 h, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, Controller ULTIMAX4 DSM Double screen Table size 762 x 510 mm Knsdpfx Abjxwmgio Usd Table load max 1350 kgs X travel 610 mm Y travel 510 mm Z travel 610 mm Spindle speed 10000 rpm Spindle taper SK40 Spindel power 9,4/11 kW Weight 4300 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories - Coolant unit - Chip auger - SW options: pocket islands, rigid tapping, DXF, Ultipro - machine mounths Under power in our showroom in Hungary. Very nice condition.

Condition: excellent (used), mileage: 749,582 km, power: 294 kW (399.73 HP), fuel type: diesel, color: white, axle configuration: 6x2, tire size: 385/65 R 22.5, fuel: diesel, wheelbase: 4,800 mm, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 5,200 mm, Year of construction: 2009, Equipment: ABS, differential lock, parking heater, trailer coupling, - Air Suspension - Beacon(s) - Disc brakes - Electrically adjustable door mirrors - Electrically operated windows - Fog Lights - Gullet - Handlebar adjustable in height - High Beams - Power steering - PTO - Radio - Radio Bluetooth - Radio CD player - Sleeping cabin - Sper - Stability Control - Super Single Tires - Toolbox - Work lamp(s) Crane Tap Length: 14.6 m Number of hydraulic extensions: 5 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Meter capacity: 24.3 m Capacity kilo: 7150 kg Structure Construction year: 2008 General information Year of manufacture: Jan 2009 Cab: single Registration number: BV-SB-91 Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Drivetrain Make of engine: Volvo Transmission Transmission: 12 gears, Automatic Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/65 R 22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Suspension: air suspension Rear axle 2: Tyre size: 315/70 R22.5; Double wheels; Lift axle; Max. axle load: 7500 kg; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80%; Suspension: air suspension Measures Dimensions (LxBxH): 880 x 250 x 385 cm Weights Empty weight: 16.300 kg Carrying capacity: 10.700 kg GVW: 27.000 kg Kedpfx Aew D Ha Eeb Uend Functional Crane: HMF 2820 - K5, year of manufacture 2009, behind the cab Make of bodywork: Cabel Kabel NCH 20 T 2025.5.130 Tipper: Back Interior Number of seats: 2 Number of beds: 1 Maintenance APK (MOT): tested until 01/2026 Condition Technical condition: very good Visual appearance: very good Number of hand transmitters: 2 For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: used, Workbench Column Drilling Machine FLOTT type 16 STG/R2 Spindle: CM2 Spindle exit: 100 mm Spindle speed: from 80 to 2000 RPM Table size: Length 340 mm x Width 280 mm Maxi distance spindle nose/table (lower table): 400 mm Throat depth: 240 mm 2 speed motor 2,2 kW Drilling/tapping function Adjustment by belt variator Electronic RPM speed not working Voltage: 380 V Width: 500 mm Depth800 mm Ksdpsxx Tncefx Ab Usnd Total height: 1100 mm Weight: approx 150 kg

Condition: refurbished (used), Year of construction: 2010, tank capacity: 60 l, Joni cooking vessel Kedpfx Absxvy Udo Usnd Capacity 50 / 60 litres Heated by own steam generator Discharge by tap and / or tipping

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Options: Steady rest Knjdpfx Asxyf Udjb Usd SMW K4 steady rest Chip conveyor High-pressure pump 15 bar Tool Eye Tailstock EIA/ISO Overload detector Synchronized tapping Tooling

Condition: good (used), Year of construction: 2006, operating hours: 71,682 h, functionality: fully functional, machine/vehicle number: 143, travel distance X-axis: 2,400 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, torque: 2,212 Nm, controller manufacturer: Fanuc, controller model: 15i, workpiece diameter (max.): 2,800 mm, workpiece weight (max.): 8,000 kg, table width: 1,500 mm, table length: 1,500 mm, table load: 8,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 6,000 rpm, coolant supply: 30 bar, spindle motor power: 22,000 W, number of spindles: 1, number of slots in tool magazine: 120, tool length: 470 mm, tool diameter: 380 mm, Equipment: chip conveyor, documentation/manual, Maximum main spindle speed: 6000 rpm Knodoxxk T Njpfx Ab Ujd 3 gear stages Drive power: 22/26 kW Maximum torque: 2,212 Nm Internal cooling + external cooling + Niagara system Tool holder: MAS BT50 - Mitsui pull stud Tool changer with 120 positions 4 axes / 4th axis with Inductosyn measuring system / Resolution 0.001 Clamping table: 1500mm x 1500mm, max. 8,000kg Travel paths: X=2400mm, Y=2000mm, Z=1500mm Measuring systems: X, Y, Z with direct linear scales Interference circle: 2,800mm Rigid tapping function Data interface: RS232C Scraper belt conveyor: Knoll type 600 K-1 Filter system: Knoll type SF1000/Turbo-2 30 bar Filter unit footprint: 2500 x 1400 x 2400mm

Condition: used, Year of construction: 2006, Radial drilling machine Manufacturer: Valmer Model: TR 80/2500 SP Year of manufacture: 2006 Table dimensions: 1,000 x 800 x 560 mm Knodpfxew Dbgye Ab Ued Max. drilling diameter: 80 mm Max. tapping diameter: 42 mm Max. distance spindle axis/column: 2,500 mm Min. distance spindle axis/column: 500 mm Horizontal head travel: 2,000 mm Max. distance spindle nose to working surface: 2,000 mm Min. distance spindle nose to working surface: 550 mm Spindle stroke: 450 mm Morse taper: MT 6 Power: 7.5 kW Machine dimensions: 3,730 x 1,400 x 3,825 mm Weight: 11,000 kg

Condition: used, total height: 1,600 mm, total length: 1,250 mm, total width: 800 mm, Empty weight: 150 kg Kjdpfxowywwyj Ab Usnd Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 - Control: Conventional - Motor power: 0.6kW - Spindle speed max.: 1600rpm - Model: omboormachine - Table width: 225mm - Table length: 290mm - Spindle speed min.: 320rpm - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 8.9 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 533 x 406 483 [mm] - Rapid traverses rates (X/Y/Z) : 24 [m/min] - Distance table / spindle nose (min./max.) : 36-519 [mm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 TABLE - Table dimensions : 198 [mm] - Maximum weight upon table : 150 [kg] * Distance table / spindle nose (min./max.) : 36-519 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22 [kVA] WEIGHT & DIMENSIONS Knodpfx Ajuhbubsb Ued - Machine floor space : 2994 x 2666 mm [mm] - Machine height : 2669 [mm] - Machine weight : 3360 [kg] MACHINE HOURS - Number of working hours : 22000 [h] EQUIPMENT - CNC : HURCO WINMAX V09.01.393.24 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : HURCO * travel 4th axis : -30 / +110 [°] * indexing precision 4th axis : 0,001 [°] * travel 5th axis : 360 [°] * indexing precision 5th axis : 0,001 [°] - Coolant tank * with high-pressure pump : 20 [bars] - Coolant through spindle - Chip auger - Tool probe : Renishaw NCRTX/RX

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 90 m/min, nominal power (apparent): 42 kVA, total length: 5,680 mm, total width: 3,170 mm, table load: 400 kg, rotary table diameter: 570 mm, overall weight: 15,300 kg, spindle speed (max.): 21,000 rpm, spindle nose: HSK-A63, tool length: 365 mm, tool diameter: 170 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, CNC Machining center GROB G350 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2018 CNC control: SIEMENS 840D sl Number of simultaneous axes: 5 Stroke X axis: 600 [mm] Stroke Y axis: 855 [mm] Stroke Z axis: 750 [mm] Rapid traverse rate X axis: 70000 [mm/min] Kjdpfjxt El Njx Ab Uond Rapid traverse rate Y axis: 45000 [mm/min] Rapid traverse rate Z axis: 90000 [mm/min] Max. load on table: 400 [Kg] Stroke A axis : swiveling area of rotary table: -185 / +45 [°] B axis swivelling stroke: 360 [°] Table surface Ø: 570 [mm] Spindle type: HSK-A63 Max. spindle speed: 21000 [rpm] Spindle power: 39 [kW] Tool changer magazin number of stations: 60 Max. tool length: 365 [mm] Max. weight of single tool: 8 [Kg] Max. tool diameter: 170 [mm] Rated current: 61 [A] Total power required: 42 [kVA] Supply voltage: 400 [V] Machine dimensions: 5680 x 3170 [mm] Weight: 15300 [Kg] EQUIPMENT INCLUDED: x1 Renishaw OMP60 part probe x1 High pressure coolant pump IKZ: 10–80 [bar] x1 Coolant chiller with air-cooled refrigeration unit: 13 [kW] x1 GROB spindle diagnostics (GSD) software option x1 Tool cleaning device x1 Decentralized work area mist collecting system x1 Automatic door setup x1 Chip conveyor x1 Interface for pallet changer x1 Oil skimmer for waste oil collection Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, Axa, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, but also CNC milling, drilling and tapping machines, as well as CNC grinding machines.

Year of construction: 2025, condition: new, functionality: fully functional, NEW NEW Cream Cooker CK 60 NEW NEW Efficient operation for cooking and heating creams and masses Ksdpev H Titofx Ab Usnd Precise temperature control Digital timer switch, 2 speeds Kettle capacity: 60 liters Working volumes: 4 to 38 liters Stainless steel design, thermal oil system Hand wheel for easy emptying Mobile machine with locking caster Connection: 400V, 16A CEE plug Dimensions: 960 x 780 x 1630 mm (WxDxH) NEW machine with warranty + spare parts service Options: Delivery service Leasing & rental options Touch panel LCD DN50 outlet tap Stronger heating system Maintenance contract Service package Training & commissioning You'll only find such a TOP selection with us!

Condition: good (used), Year of construction: 2000, functionality: fully functional, throat depth: 1,680 mm, total height: 31,600 mm, drilling capacity: 75 mm, total width: 11,000 mm, total length: 28,300 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 10 rpm, quill stroke: 400 mm, spindle mount: MK 6, overall weight: 5,700 kg, height adjustment type: electric, power: 10 kW (13.60 HP), Radial drilling machine WRA 632 economic. Year of manufacture: 2000. Manufacturer: H. CEGIELSKI PL. Morse taper 6. Arm length 1600 mm, Max drilling diameter in steel – 65 mm, in cast iron 75 mm, Max tapping diameter in steel – M56, in cast iron M68, Spindle diameter 100 mm, Spindle travel 400 mm, Number of spindle speeds: 12, from 10–1600 rpm, Number of feeds: 8, from 1.14–2.04 mm/rev, Spindle reach from column: min 335 mm, max 1600 mm, Distance from spindle to base: min 390 mm, max 1680 mm, Knodstp Swwepfx Ab Ued Base working surface 1760 x 1020 mm, Worktable (cube) dimensions 750 x 500 x 1200 mm, Overall dimensions (height x length x width) 3160 x 2830 x 1100 mm, Weight 5700 kg, Total power requirement 10 kW.

Year of construction: 2018, condition: ready for operation (used), Main Drive Spindle speed range 2400 min-¹ Spindle motor power 30 kW Additional Equipment Functions: Synchronized tapping, LCC-4 slat-band chip conveyor, HPC High pressure coolant supply (21 bar), ATP Automatic tool presetting, EXpack, EU-trafo This HAAS ST-40 was manufactured in 2018. A robust horizontal turning machine featuring a 102 mm bar diameter, 2400 min-¹ speed, and a powerful 30 kW motor. It includes a 12-station BOT turret, high-pressure coolant system, and a programmable hydraulic tailstock. Ideal for high precision turning operations. Contact us for more information about this machine. Application Types Turning Knjdoxvfhpopfx Ab Ued

Condition: used, Year of construction: 2006, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Fanuc, controller model: 18i-MB, table load: 500 kg, rotational speed (max.): 12,000 rpm, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Technical data: Make and Model: Quaser MV154 APC/P Year of manufacture: 2006 Control system: Fanuc 18i-MB Working range (XYZ): X-axis: 700 mm Y-axis: 500 mm Z-axis: 560 mm Kodpfx Ajwqgucjb Usnd Table size: 500 x 510 mm Table load capacity: 500 kg Tool location: 48-position, automatic tool changer Tool taper: BBT40 Vertical axis speed: 12,000 rpm (max) Motion and speed parameters: X, Y, Z movements: 30 m/min Automatic pallet changer (APC/P): Versatile machining commands, such as 3D machining, bevels, milling, drilling and tapping Contact us! Also ask for a transportation quote for the machines!

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment Knsdpfx Ajxrmp Tob Uod -Tapping chuck: MK2 mount -Cutting performance: -Bore: Ø 10 mm -Dimensions: Ø 55 x 200 mm -Weight: 1.4 kg

Condition: excellent (used), Year of construction: 2021, Vertical single-spindle turning center, vertical lathe Manufacturer: EMAG Model: VL 400 (Siemens) Year of manufacture: 2021 Operating hours: approx. 1,848 Turret base unit and Y-axis slide unit HP turret drive unit for driven tools (C442) with internal coolant supply to the tool Max. speed: 6,000 rpm Nominal speed: 3,200 rpm Tool holder unit for driven tools: 12 x BMT75 Rotary workpiece transport system, O-version Drag frame system for 10 workpieces Workpiece height (incl. workpiece pallet): max. 300 mm Workpiece weight: max. 60 kg Set (10 pieces) drag frames for O-band for workpiece diameter: 150 - 400 mm Blow-off of workpiece and clamping device (pick-up) Coolant supply: 15 bar Coolant pump delivery rate approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water - air) A cooling unit (with 2-circuit technology) regulates the machine’s thermal balance. Spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Coolant double filter, manually switchable Filtering fineness 100 μm, with electronic and mechanical contamination indicator Chip conveyor Hinged belt design: rear discharge Chip discharge height 1,100 mm (with integrated coolant tank, capacity approx. 500 l) Emulsion mist extraction: extraction capacity approx. 800 m³/h Rinsing gun Workpiece measurement with probe Blow-off for probe Tool life monitoring (sister tool management) Kedpfovq Iwyjx Ab Uend Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color signal light Axial drilling-milling head – BMT75 CC 5x angle drilling-milling heads 90° - BMT75 CC (i=1:1) Set of tools for OP10 + OP20 Hydraulic power chuck cylinder Gr.150 - with 1 media feed-through Max. clamping force 10,850 daN at 70 bar Coolant through spindle Programmable clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick change max. = 2,200 rpm (reference speed as per DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Rinse nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 finishing external 1x 8.BMT25VL8IKX50 roughing external 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 tapping adapter 1x 40.75V5KRVL8IKD facing head 50mm 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 drill diameter 20mm 1x 42.V522L08Ik drill diameter 22mm 1x 27.V514WNL31 drill diameter 14mm Software package Operating manual / Maintenance manual

Condition: new, Approx. 34.56 linear meters of META tire racks, tire racks, wheel racks, workshop racks, storage racks, available immediately from stock Specifications: - Height: approx. 200 cm - Depth: approx. 40 cm - Length: approx. 34.56 linear meters Shelf offer 34.56 linear meters (30 bays) consisting of: - 031 x uprights approx. 200 x 40 cm, disassembled (including 2 x feet and 2 x cover caps). - 180 x crossbeams approx. 115 cm. - 360 x self-tapping screws 4.8 x 13. - Manufacturer: META. - Load capacity: 150 kg per bay, evenly distributed. - Levels: 3 x storage levels. - Finish: Sendzimir galvanized. - New, ex-stock. - Made in Germany. - 100% quality at the best price. We can pre-assemble the frames for a small surcharge of €2 net per piece. -- MULTIPLE ITEMS AVAILABLE IMMEDIATELY-- Price: €2057.00 net plus applicable VAT. You will receive a VAT invoice. Transport: Delivery is available upon request via our partner shipping company; costs depend on your zip code. Installation: Knodpfx Abexwwtts Ujd Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to help you realize your projects, from planning and ordering to installation.

Condition: new, The SSB 50 F Super VT, a robust Column Drilling Machine from KNUTH, is expertly designed for precision drilling, countersinking, reaming, and tapping in various settings, from maintenance tasks to industrial construction. This drill press features a sturdy construction with a thick-walled column and a large throat, ensuring stability and reliability during operation. With its advanced touchscreen control panel, users can easily select the necessary operating parameters, while the infinitely variable spindle speed allows for flexibility in machining. The motorized vertical movement of the setup table simplifies the handling of heavy parts, making it ideal for custom and small-series machining. Standard equipment includes a powerful LED work lamp, a coolant device, and an automatic quill feed. For those looking for a high-quality Column Drilling Machine, the SSB 50 F Super VT is an excellent choice. Request a quote today to learn more about this exceptional machine! Knjdpfx Asnp Hp Isb Usd