Used Telescopic Spindle for sale (14,562)

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,145 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN Hfedpfx Ajztgl Don Nsn ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM

Condition: used, Year of construction: 2022, total length: 8,720 mm, • Vordere Pendelachse für höhere Stabilität auf allen Untergründen • Selbstsperrdifferenzial • Steckdose am Arbeitskorb • Sicherer Betrieb bis 12,5 m/s Windgeschwindigkeit • Integrierte Diagnoseanzeige mit CAN-Bustechnik • Hoher Grad an Baugleichheit im Sortiment • Drehbereich 360° • Allradantrieb • 4 Lenkräder • CAN-BUS • Große Öffnungsweite für einfachere Instandhaltung • Hupe • Betriebsstundenzähler • Proportionalsteuerung • Rundumleuchte • Non-Marking-Reifen • Elektrische Sicherheitspumpe • Not-Halt-Taste • Fahrsignal • Notabsenkung • Borddiagnose • Fahrbewegung zulässig bei maximaler Hubhöhe • Hydraulische Plattformdrehung • Max. Arbeitshöhe 20,28 m • Max. Höhe Arbeitskorb 20,21 m • Gelenkpunkt 7,70 m • Max. Reichweite 12,72 m • Negative Höhe 1,77 m • Negative Reichweite 10,30 m • Max. Tragkraft 230 kg • Max. Steigfähigkeit (eingefahren) 30 % • Max. Neigung X -5° / Y -5° • Max. Windgeschwindigkeit 12,5 m/s • Wenderadius (außen) 2,57 m • Wenderadius (innen) 1,56 m • Drehbereich Oberwagen (endlos) 360° Hfjdpfx Aneztgmho Nen • Vertikale JIB-Drehung +70°/-60° • Breite Arbeitskorb 0,79 m • Länge Arbeitskorb 1,83 m • Drehung Arbeitskorb 180° (+/-90°) • Geschwindigkeit (eingefahren) 6,1 km/h • Geschwindigkeit (ausgefahren) 1,1 km/h • Reifen 315/55 D20 • Hydrauliköltank 67 l • Batterietyp Bleibatterie • Batteriekapazität 24x2 V/375 Ah • Ladegerät 48 V/60 A • Antrieb Hydrostatisch

Condition: new, Year of construction: 2025, mast type: telescopic, fuel type: hybrid, color: red, Drivetrain Drive: Track Weights Empty weight: 3.300 kg Functional Lifting capacity: 230 kg Working height: 2.200 cm Dimensions of cargo space: 644 x 88 x 198 cm CE mark: yes Hfsdpfjyi Ezdjx An Njn Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Delivery terms: EXW Max. horizontal reach: 1240 m Production country: IT Additional information Please contact Vink Machinery for more information Hinowa TC 22 * NEW!!! * Diesel lithium drive * 22-meter working height * 12.4-meter horizontal reach * Variable outriggers * Automatic outriggers * Hydraulically adjustable tracks * Coming-home function * Memory function * Work lights * 230-volt power supply, air and water connections in the basket * 3300 kg net weight

Condition: good (used), Year of construction: 2021, mast type: telescopic, fuel type: diesel, Weights Empty weight: 20.685 kg Functional Lifting capacity: 454 kg Working height: 3.980 cm Dimensions of cargo space: 1234 x 399 x 315 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Hsdpfx Aeyx T Ncjn Nefn Max. horizontal reach: 2530 m Max swing of platform in degrees: 360 Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: SX-125XC Year of build: 2021 Condition: Used Data: Max. working height: 39,80 m Movable up to working height: 39,80 m Platform height: 37,80 m Max. reach: 25,30 m Platform lifting capacity: 454 kg Platform dimensions LxW: 2,45 x 0,93 m Total dimensions LxWxH: 14,20 x 3,99 x 3,15 m Transport dimensions LxWxH: 12,34 x 3,99 x 3,15 m Swivel range: 360° Ground clearance: 0,35 m Overhang: 0,33 m Track widening: 3,52 m Tyres: Geländereifen Drive type: Diesel Empty weight: 20.685 kg Special features: Rotatable work basket 160°, basket arm, soot particle filter, high basket load, work spotlight on the work basket.

Condition: new, Year of construction: 2025, mast type: telescopic, fuel type: hybrid, color: red, Drivetrain Drive: Track Weights Empty weight: 3.300 kg Functional Lifting capacity: 230 kg Working height: 2.200 cm Dimensions of cargo space: 644 x 88 x 198 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 100 Rear tyres remaining : 100 Hodpfxeyk Hwcj An Nofn Delivery terms: EXW Max. horizontal reach: 1240 m Production country: IT Additional information Please contact Vink Machinery for more information Hinowa TC 22 Tracked Boom Lift * NEW!!! * Diesel lithium-ion drive * 22-meter working height * 12.4-meter horizontal reach * Variable outriggers * Automatic outriggers * Hydraulically adjustable tracks * Coming-home function * Memory function * Work lights * 230-volt power supply, air and water connections in the basket * 3300 kg net weight

Condition: excellent (used), Year of construction: 2024, operating hours: 77 h, mast type: telescopic, lifting height: 21,000 mm, fuel type: gasoline, Drivetrain Make of engine: Honda Weights Empty weight: 750 kg Functional Lifting capacity: 200 kg Dimensions of cargo space: 590 x 135 x 150 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Hodsymx D Hopfx An Nefn Max swing of arm in degrees: 180 Production country: DE Additional information Please contact Vink Machinery for more information Klaas Toplight 21 Ladder Lift * 2024 * Petrol powered * 21-meter working height * 77 working hours * 200 kg lifting capacity * Foldable platform sides * Remote control * Automatic controls up and down * Ladder rotates 180 degrees * Equipped with additional support legs * Net weight 750 kg

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,878 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l Hfodoxd Enfopfx An Non · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,878 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm Hfjdpfxsxd Hf Se An Njn · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: new, Year of construction: 2023, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,878 mm, · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s Hfodpsxd Hpkefx An Nen · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: excellent (used), Year of construction: 2018, operating hours: 1,915 h, mast type: telescopic, fuel type: diesel, color: other, Drivetrain Drive: Track Make of engine: Deutz Weights Hfsdpfx Asz Hihron Non Empty weight: 7.500 kg Functional Lifting capacity: 230 kg Working height: 1.600 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Max. horizontal reach: 1400 m Max swing of arm in degrees: 360 Max swing of platform in degrees: 180 Latest inspection: 2026-09-01 Production country: US Additional information Please contact Martyn Joosse for more information

Condition: used, Year of construction: 2022, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,929 mm, · Max. Tragkraft 3300 kg · Max.Hubhöhe 9.07 m · Max. Auslage 6.35 m · Ausbrechkraft mit Schaufel 5770 daN · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m Hodpfx Aeztga Ien Njfn · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: used, Year of construction: 2022, load capacity: 9,000 kg, lifting height: 7,000 mm, total length: 7,360 mm, - Max. Tragfähigkeit bei 600 mm LSP 9 000 kg - Max. Hubhöhe 6.84 m - Max. Reichweite 3.72 m Hsdpfxoztgdmj An Nofn - Heben 9.2 s - Senken 7.8 s - Teleskop Ausfahren 6.6 s - Teleskop Einfahren 6.1 s - Betriebsbremse Ölbad Lamellenbremse an Vorder- und Hinterachse - Parkbremse Automatische Negativbremse - Hubraum 4.5 l - Leistung 141 PS / 104 kW - Max. Drehmoment 534 Nm / 1500 U/min - Einspritzung direkt - Zugleistung (unter Last) 10.905 daN - Steigfähigkeit (beladen) 48% - Getriebe hydrostatisch - Fahrtrichtungswahl elektro-hydraulisch - Anzahl Gänge vorwärts / rückwärts 2/2 - Max. Fahrgeschwindigkeit 30 km/h - Achsen DANA - Lenkarten Allradlenkung mit 3 Lenkarten - Hydraulikbedienung JSM® Multifunktions Joystick - Lastmomentanzeige und Überlastabschaltung nach EN 15000 Norm - Hydraulik variable Axialkolbenpumpe - Load Sensing Pumpe 180 l/min - 270 bar - Hydrauliköl 151 l - Kraftstoff 150 l - Wenderadius (Aussenkante Räder) 4.88 m - Kippwinke Geräteaufnahme (An- / Auskippen) 137 ° - Innenschallpegel (LpA) 79.7 dB - Außenschallpegel (LwA) 103 dB - Vibrationswert an Händen / Armen

Condition: good (used), Year of construction: 2013, operating hours: 3,450 h, fuel type: diesel, Genie S-40 telescopic boom lift 4x4 DEUTZ DIESEL 14.2m working height, 2013. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without warranties (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Hfedpfez Hnx Nex An Non Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, spindle speed (max.): 3,750 rpm, bar diameter (max.): 26 mm, overall weight: 6,800 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For further Schütte multi-spindle machines for sale from the same location, see below! TECHNICAL DETAILS Bar diameter round: 26 mm Bar diameter square: 19 mm Bar diameter hexagonal: 22 mm Bar diameter octagonal: 24 mm Spindle circle diameter: 270 mm Standard bar feed: 125 mm Special bar feed: 290 mm Longitudinal slide travel, standard total: 80 mm Longitudinal slide travel, standard working length: 63 mm Longitudinal slide travel, special total: 125 mm Longitudinal slide travel, special working length: 98 mm Cross slide travel, upper slide total: 40 mm Hjdpfxoz Agy Hs An Nsfn Cross slide travel, upper slide working length: 25 mm Cross slide travel, middle slide total: 40 mm Cross slide travel, middle slide working length: 25 mm Cross slide travel, lower slide total: 50 mm Cross slide travel, lower slide working length: 31 mm Number of spindle speeds: 49 Spindle speed range I: 530–3,750 rpm Spindle speed range II: 236–1,700 rpm Workpiece revolutions per working cycle, standard: 60–425 Workpiece revolutions per working cycle, short: 33.5–236 Workpiece revolutions per working cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Rated drive motor power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,500 x 1,450 mm Length with bar guide: 6,470 mm Machine weight: 6,800 kg Space requirement for packed machine: 14 m³

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Hfedpfx Aez Ag Absn Nen Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Hfedpfx Anjz Ag A Is Njn Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: used, Year of construction: 2011, load capacity: 200 kg, empty load weight: 351 kg, fuel type: electric, Power Tower Nano PTN45. Year 2011. Working height 4.5 meters. Weight 351 kg. Platform capacity 200 kg. 12-volt battery with a 230-volt charger. Operational. Video, photos, and additional information also available via WhatsApp! Price net + 21% VAT, or net for export with VAT number. We speak Dutch. Wir sprechen Deutsch. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (NL) in as-is condition! Hsdpfx Ansz H Auls Nsfn

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Hfsdjz Aplxjpfx An Nsn Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: used, Comec 3-Spindle Vertical Drill Hodpfx Asy S Adijn Nefn Maximum piece length cm. 100

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Siemens, workpiece weight (max.): 100 kg, total height: 3,030 mm, total length: 5,400 mm, total width: 6,265 mm, overall weight: 24,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 32,000 W, number of spindles: 2, number of slots in tool magazine: 100, Equipment: CE marking, chip conveyor, documentation/manual, type plate available, SAMAG MFZ 4-2W CNC twin-spindle machining center For sale: SAMAG MFZ 4-2W CNC machining center, currently in working order and available for inspection at our facility. The machine is ideal for high-productivity machining thanks to its twin-spindle configuration and has been maintained in good working condition. >Included in the supply: Spare electro-spindles Spare B-axis motors Spare W-axis motors Spare A1/A2 motors Machine documentation available (mechanical and electrical) >Main features: CNC twin-spindle machining center Year of manufacture: 2014 Machine in working order Inspection and testing possible on-site by appointment The inclusion of spare parts represents a significant added value, allowing for reduced time and costs for any future maintenance work. The system includes a chip extraction system for cast iron components from Knoll, complete with a filter mat for managing the emulsion for coated parts. Spindle mount: HSK-80 The 3D (step) model of the machine is also available for use with simulators. IMPORTANT: The machine will be sold without tooling, as it is specific to the components being produced! For further information, photographs, videos of the machine in operation, or to arrange a visit, please contact the seller directly. Hedoz Nlzzjpfx An Nofn

Condition: excellent (used), Year of construction: 2020, operating hours: 1,761 h, machine/vehicle number: 53935676555606, load capacity: 454 kg, overall weight: 17,910 kg, fuel type: diesel, product width (max.): 2,490 mm, working height: 27,910 mm, enginetype: Diesel, manufacturer: Genie Hfodpfx Aszqccten Non

Condition: used, Year of construction: 2024, operating hours: 59 h, lifting height: 20,000 mm, construction height: 2,740 mm, fuel type: electric, drive type: Elektro, construction width: 2,380 mm, Telescopic boom lift Hodsvgh S Ajpfx An Nsfn Front tire size: 914 x 381 mm / 36X15D610 Rear tire size: 914 x 381 mm / 36X15D610 Battery voltage: 48V Battery capacity: 460Ah Battery condition: 80-100% CE certificate, Image may be for illustration purposes. Exide lead-acid battery with central filling 48V 460Ah, cover for external display, galvanized work platform basket 2.10 m, foam-filled tires 910x370 mm 36x15D610, Secondary Protection System (SPS).

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 34 h, load capacity: 1,250 kg, lifting height: 4,300 mm, fuel type: diesel, construction height: 1,930 mm, empty load weight: 2,750 kg, drive type: Diesel, construction width: 1,490 mm, Rigid telehandler Technical condition: very good Front tyres type: pneumatic Front tyres size: 31X15-15 Front tyres condition: 80 - 100% Rear tyres type: pneumatic Rear tyres size: 31X15-15 Rear tyres condition: 80 - 100% Quick coupler, 3rd hydraulic valve, rear work lights, front work lights, heater, solenoid valve, fully enclosed cab, CE certificate, safety light. Image may be for illustration purposes. Hedpfx Aovgh R Esn Nsfn Rubber floor mats, air-suspended seat with textile cover (Grammer Pack Comfort version), EN 15000 Easy Link standard module, cab with heater, roof and rear window wipers, sun visor on front windshield and roof, height-adjustable steering column, car radio tuner 50W, wheel chock, TÜV prep, 25 km/h, rear and roof window wipers, LED beacon, compact road lighting front and rear, solenoid valve for 1st function, hydraulic quick coupler system, sun visor on windshield and roof.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 187 h, load capacity: 1,500 kg, lifting height: 4,300 mm, fuel type: diesel, construction height: 1,920 mm, empty load weight: 2,700 kg, drive type: Diesel, construction width: 1,490 mm, Telescopic forklift rigid Load center of gravity: 500 Technical condition: New Front tires type: pneumatic Front tires size: 10.0/75-15.3 Hfsdpfx Ajmky N Asn Nen Rear tires type: pneumatic Rear tires size: 10.0/75-15.3 Quick coupler, 3rd valve, rear work lights, front work lights, heating, full cabin, CE certificate, Images may serve as symbolic representations of fork carriage with forks

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 740 h, machine/vehicle number: Z30N14-15413, load capacity: 227 kg, mast type: other, lifting height: 10,890 mm, platform width: 1,170 mm, empty load weight: 6,450 kg, transport width: 1,190 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 06/2027, fuel type: electric, tire condition: 80 %, drive condition: 80 %, wheelbase: 1,580 mm, ground clearance: 90 mm, color: blue, arm reach: 6,250 mm, We are offering this used Genie Z-30/20 N telescopic boom lift, manufactured in 2013, for sale. Hfedpfx Aozhtnhon Nsn If you have any questions or require further information, please feel free to send us a message or call us.