Used Template Device for sale (11,509)

Condition: used, - Location: Bremen The multi N/C pharma UV is a compact device for safe and precise TOC determination in pure and ultrapure waters. It complies with the requirements of the water monograph of the European Pharmacopeia Commission and the monograph of the United States Pharmacopeia Convention (USP), making it particularly suitable for water monitoring in the pharmaceutical industry, as well as for water monitoring in the semiconductor industry. Godpfx Aaohzxize Aoir The multi N/C pharma UV operates on the principle of wet chemical UV oxidation combined with highly precise and CO2-selective NDIR detection. Various technical documents as well as an English-language operating manual are available.

Condition: good (used), Pallet wrapper, strapping machine, packaging machine, strapping machine, skinpack machine, stretch wrapping machine, stretch film machine, wrapping roller, cardboard roll carrier, transport roller, carrying roller Gedpeyx Agwjfx Aa Asir -Transport trolley: with cutting device -Roll: Ø 327 x 1800 mm rubberized -Shaft: Ø 50 x 415 mm -Drive shaft/mount: Dimensions see photos -Dimensions: 2355/520/H327 mm -Weight: 286 kg/unit

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece 120 T Gsdekwcnzopfx Aa Aeir Dimensions (Estimate) Length 60000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight Gijdpfx Askwcn Eea Aor 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length 24000 mm Width 6000 mm Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, MIG / MAG Pulse Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Item No.: 4.075 Serial No. Year of manufacture: approx. 2000 Output: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 V Open-circuit voltage: approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (program and manual operation) Gedpfx Aasyxy Tbj Aeir 2-stroke, 4-stroke, 4-stroke special, and spot welding - Separate 4-roller wire feeder FRONIUS Type VR 152 with approx. 1.5 m interconnection hose package - 4 m hose package with new central connection - External Fronius water cooling unit Type FK 71 - New welding gas pressure regulator - Welding machine equipped with 1.2 mm welding wire Dimensions (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration Also suitable for TIG and stick welding. Additional equipment for TIG and stick welding not included.

Condition: good (used), Built-in control unit, control cassette, controller, bus controller, bus module, Powerlink -Manufacturer: B&R, Ethernet Powerlink with 8 feed modules Godpsubfx Rofx Aa Aoir -Powerlink: Type X20 BC 0083 -Feed modules: X20 PS 9400 1x / x20 DI 9371 3x / x20 AO 4632 2x / x20 PS 3300 1x / -Price/Delivery: complete -Dimensions: 140/100/110 mm -Weight: 0.7 kg

Condition: good (used), Built-in control unit, control cassette, controller, bus controller, bus module Gisdpfxjyxc Ibj Aa Ajr -Manufacturer: B&R, Control unit controller -Type: X20 BC 0043 C01 -Power feed module: X20 PS 9400 -Number: 1 module available -Dimensions: 105/40/80 mm -Weight: 0.1 kg

Condition: good (used), Horizontal milling device – counterholder for KUNZMAN milling machines series WF. This was an accessory for a KUNZMANN WF 4/3 TNC 124 There are 2 pieces available. The new price at Kunzmann is over € 2,000 + VAT. With a corresponding adapter plate it should also fit other machines e.g. EMCO, MIKRON; DECKEL; FPS etc. Price net ex warehouse Godpfx Aevr Stusa Asir

Condition: good (used), Colortronic Dosing Unit UB 95 Twin Doser Manufacturer: Colortronic GmbH Model: UB 95 Serial number: 201120044 Gijdpfx Ajyxwq Dea Asr Year of manufacture: 2012 Voltage: 230 V Frequency: 50 Hz Power: 0.3 kW Design: Twin doser with two stations

Condition: excellent (used), Year of construction: 2011, 1.0 pc. used image processing measuring device Manufacturer: MITUTOYO Model: QS200Z Gjdpjyxxy Tofx Aa Asir Year of manufacture: 2011 Technical data: see photos.

Condition: good (used), Year of construction: 2018, functionality: fully functional, MITUTOYO Contracer CV-2100M4 contour measuring device Horizontal measuring range X = 100mm Giodpfx Aaevun Tps Aer Vertical measuring range Z = 50mm Column travel range Z2 = 350mm Inclination +/- 45° Dimensions (W, D, H) 745mm x 450mm x 885mm Total weight approx. 150kg Incl. PC system, Incl. cross table 218-001 Incl. rotating vice 2028-003

Condition: used, Gulmay CP225-1/29 X-Ray Unit Maximum power: 3,200 W kV range: 20 – 225 kV kV accuracy: ±1% of the required value kV reproducibility: Better than ±0.05 kV High voltage ripple: Less than 5.0V/mA with 10M high voltage cable mA range: 0 – 30 mA mA accuracy: ±0.5% of the required value Giedpey Akczefx Aa Aer mA reproducibility: Better than 2μA Input voltage: 220V ±10% 47 – 63 Hz Input current: 27 A at 220V Output connector: R30 Cathode dimensions (W x H x D): 435 x 780 x 818 mm Storage temperature: -40°C to +70°C Operating temperature: 0°C to +40°C Relative humidity: 95% Duty cycle: 100% Comms: Analog / RS232 / RS422 You are welcome to arrange an inspection appointment. We are happy to organize affordable freight shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued—provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective holders and are used here solely for identification and description of the products. Variations from technical data and errors in the description may occur and are subject to change.

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Gedpfx Aeyqr Sxsa Aeir

Condition: used, 0 1200 kg volume ca. 659 L dimensions 1280 x 780 x 1000 mm weight 170 kg Gsdpfxoyfh Nvj Aa Asir Upper length: 1280 mm Lower length: 1190 mm Upper width: 780 mm Lower width: 700 mm Height: 1000 mm (total height) Base height: 280 mm Inner height of the tub: 720 mm (1000 mm – 280 mm) The box truck is made of sturdy sheet steel construction, welded to be oil and watertight, and has a drive-in pocket for forklifts.

Condition: good (used), centre height 220 mm table diameter 220 mm 250mm - chuck - 3 jaws 80mm passage Godpju Sbl Rofx Aa Ajir Can be used vertically and horizontally Standing tip height 220mm

Condition: new, Year of construction: 2024, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Gsdjr D Nmkopfx Aa Asir Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Dust suction hood 100 mm Motor output 0,55 kW Giedpfxeyw Tlnj Aa Ajr Air consumption 1150 m³/h Dimensions (L/W/H) 880 x 520 x 1640 mm

Condition: good (used), Year of construction: 1993, Dust suction hood 100 mm Motor output 1,1 kW Air consumption 720 m³/h Dimensions (L/W/H) 1150 x 515 x 1640 mm Weight 82 kg Gedpfxsyw Tlhj Aa Ajir

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Location: Nattheim Gisdpfx Aaowhzg Uo Aer

Condition: excellent (used), Tripod height adjustable Tightening thread: 1/2 Gjdpfx Asd Ey Abea Ajir Weight: 5 kg incl. carrying strap

Condition: used, Abdreharm RA 1, Abrichtbereich: aushoehlend 0,5 - 32 mm (104 - 162 mm) umfassend 0,5 - 22 mm Abdreharm RA 2, Abrichtbereich: aushoehlend 154 - 210 mm umfassend 10 - 65 mm Gods Uryzjpfx Aa Aeir Abdreharm RA 3, Abrichtbereich: aushoehlend 22 - 70 mm (66 - 120 mm)

Year of construction: 1965, condition: used, machine/vehicle number: 2383, for tube-Ø: 250 - 530 mm for material thickness: 3 - 40 mm drive: by hand space requirement: 1000 x 800 x 1200 mm Weight: approx. 70 kg Godsb Nv Stepfx Aa Asir

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Gijdpfxoc U U Udj Aa Aer Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, on it in horizontal plane around 120 mm with scale adjustable admission. On top of this, again on a round column, basic height adjustment on the column with clamping. Round guide with rack and lever for drill feed, stroke 100 mm. Space requirement over all: 600 x 400 x 850 mm high weight:

Condition: used, for Morse taper: MK 4 Giodjcftv Ajpfx Aa Aor incl. test pin, storage box

Year of construction: 1983, condition: used, machine/vehicle number: 80295, load bearing: 300 kg weight: 550 kg height of constuction: 1000 mm Gjdj Rw Nqspfx Aa Asir