Used Test Press Heat for sale (31,345)

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Dcedpfszbxvljx Acksh Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Continuous fryer. Thermal oil heated, Teflon infeed etc. In nice condition but needs new control screen and plc. Dedpfeyivr Tox Ackjch

Condition: good (used), Year of construction: 2013, functionality: fully functional, Used Durma press brake Dsdszbhnkepfx Acksch Type AD S 30175 Capacity 3050 x 175 tons Delem DA66T control system Y1, Y2, X and R axis CNC controlled CNC crowning Amada / Euro clamp Includes a set of tooling

Condition: good (used), Year of construction: 2008, functionality: fully functional, Well-maintained, used E Brake by Safan Dcjdpfxjzbhk Eo Acksh Type E Brake 100 3100 Capacity 3100 x 100 tons Y1, Y2, X, R, Z1, and Z2 CNC controlled Manual crowning Hydraulic Wila NS top clamp

Condition: refurbished (used), Year of construction: 2008, Used AMADA press brake: Dcsdszbg Sbopfx Acksh Illustrative image, machine in stock but not yet prepared. It will be in the same condition once it has been refurbished. Year: 2008 Type: HFE400-4L Capacity: 4000 x 400T Number of axes: 6 Stroke of cylinders: 350 mm Rapid traverse speed: 100 mm/sec Installation of new, high-tonnage tooling along the entire length Machine completely refurbished upon order.

Condition: good (used), Year of construction: 1996, Well-maintained, used press brake from Beyeler / Bystronic. Type PR6 150 4100 Capacity: 4100 x 150 tons Cybelec DNC 880S Y1, Y2, X, R, Z1, and Z2 axes CNC controlled Includes a set of tools. Dedpezbhh Refx Ackjch

Condition: good (used), Year of construction: 1990, Roll compactor, Bergmann – used: Price ex works: only €950 (net) Manufacturer: Bergmann Type: PS 8100E Year of manufacture: 1990 Serial number: 05 3658 2845/90 Pressing pressure: to Weight: 750 kg 400V, 5.5 kW Condition: good Dsdpfozbygrsx Acksch Available: from Q4/2026 Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, shredding and compaction of the waste, reducing its volume up to ninefold. Continuous filling: The machine allows for continuous filling by all users. The feed shaft can also remain open during the working process, which facilitates and accelerates waste compaction.

Condition: good (used), Year of construction: 1999, Baling presses, HSM, 30-ton pressing force – used: Price ex works: only €2,950 (net) Manufacturer: HSM Dcodpfszbygfsx Ackjh Type: 225.1 VL Year of manufacture: 1999 Machine number: 6124.834. N Serial number: 200014505 Pressing force: 30 tons 400V, 5.5kW Condition: good Available: from Q4/2026 Location: Hamburg

Condition: used, Year of construction: 2013, total length: 3,050 mm, total width: 1,650 mm, total height: 2,350 mm, Colour: Grey Weight: 5.690 kg Price: On request Dcjdpfx Acozbhy Tskoh - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: 7304138524 - Drive system: CNC - Control system brand: Durma - Power [kW]: 7.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 60 - Max. working width [mm]: 2050 - Column gap [mm]: 1720 - Backgauge depth [mm]: 800 - Crowning system: Mechanical - Tools included: Yes - Options: Digital readout - Transport dimensions: 3050mm x 1650mm x 2350mm (l x w x h) - Transport weight [kg]: 5690kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2015, functionality: fully functional, Used Durma press brake Dcodpfx Ajza U Twockoh Type AD S 30135 Capacity: 3050 x 135 tons Cybelec ModEva 15T CNC control Y1, Y2, X, R, Z1, and Z2 axes CNC controlled CNC crowning Amada / Euro clamping Includes a set of tooling

Condition: good (used), Year of construction: 2006, Used 4-meter CNC press brake by Bystronic Type PR 200 4100 Capacity 4100 x 200 tons Cybelec CNC control Y1, Y2, X, R, Z1 and Z2 axes Hydraulic upper and lower clamping Dcodjza U Nrepfx Ackeh Hydraulic CNC crowning Includes a set of tools

Condition: good (used), Year of construction: 2004, Used CNC press brake by Haco Dcjdpfx Acoza Ubhskoh Type PPM 36135 Capacity 3600 x 135 tons Electrically adjustable back gauge and depth setting Amada / Euro-style clamping Includes a set of tooling

Condition: good (used), Year of construction: 1991, Used press brake from Safan Dcjdeza T Dbjpfx Acksh Type CNCS 110 4300 Capacity 4300 x 110 tons Control system updated, ESA CNC control Y1, Y2 and X axes CNC controlled Equipped with a flat-bedding system / bending / hemming function Includes a set of tools

Year of construction: 1979, condition: good (used), Crimping tool, crimping machine, crimping jaws, crimping tool, hydraulic hose crimper, hose crimper Dcodszbirkspfx Ackeh -Manufacturer: Aeroquip, Hydraulic hose press type SQM 40 -Pressing pliers: size Ø 14 to 35 mm -Accessories: see photos -Transport dimensions: 635/420/H220 mm -Weight: 32.8 kg

Year of construction: 2023, condition: used, Pressing force 53 t stroke 300 mm control Siemens Pneumatic system pressure 6 bar Maximum supply pressure of the pneumatic system 10 bar Pressure in the hydraulic system 255 bar Dimensions (HxWxD) 3.200 x 2.500 x 2.350 mm weight 8.000 kg In our assessment, the bushing press is in like-new condition. Technical features: - Bushing pressing including plastic deformation - TOX pneumatic-hydraulic actuator with 53t pressing force at 6 bar - 300mm stroke - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Dcodpfszbvm Iex Ackjh Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Clamping plate, plate field, welding table, welding table, clamping plate, scribing and measuring plate, measuring table, straightening plate, short-stroke heavy-duty cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic press, bending machine, straightening machine, profile straightening system, strip straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine bending/straightening press Dsdpfxezbhqxj Ackech -Mounting plate: Mounting plate with straightening press -Length: 3260 mm -Width: 1380 mm -Piston diameter: Ø 63 mm -Stroke: 200 mm -Pressure force: t -Overall dimensions: 3260/1380/H1940 mm -Weight: 2820 kg

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, year of last overhaul: 2026, machine/vehicle number: 2026, Roll forming machine Fortuna Automat A 3 E + Dcjdpfxezbz Has Ackjh Top model with automatic shut-off Head cleaning towards the rear Partial head with stainless steel blade – NEW Dough input up to 2400g, depending on the model Dough divider with 3 forming plates Robust technology Connection: 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience!

Condition: repair required (used), functionality: limited functionality, year of last overhaul: 2025, type of input current: three-phase, input voltage: 400 V, Roll divider WP Rotamat EN Dough dividing and rounding machine Stationary machine, 30-piece capacity, ideally suited for dividing and rounding dough with a plastic knife head, for round 70g and square 80g rolls Connection: 400 V, 16A CEE plug Dimensions: 650 x 670 x 1610 mm (W x D x H) Dcsdpfxszbz Eco Ackoh Used machine (Rounding plate bearing is defective and should be replaced)

Condition: reconditioned (used), functionality: fully functional, Press Brake Dedpfxoyapdqe Ackoch Brand: HACO Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: used, Press Brake Brand: LVD Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Throat depth: 200 mm Stroke: 130 mm Dcjdpfjx Tqt Uex Ackeh Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW

Condition: reconditioned (used), functionality: fully functional, LVD 4000 x 200T Press Brake Dedpjwtmi Eofx Ackech Type PPBL 200/40 Capacity 4000 x 200T Maximum stroke 150 mm Weight 13.5T With mobile blade rack

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 130 mm, pressing force: 12 t, bending force (max.): 12 t, Stierli bender 120HE horizontal press Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons tool height 130 mm Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Straightening performance light straightening work Dcedpfoflc R Dsx Ackoh Pipe bending 3/8"-11/2" Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, tool height: 200 mm, operating speed: 10 mm/s, working height: 200 mm, bending angle (max.): 180 °, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 20 mm, lifting speed: 10 mm/s, bending force (max.): 42 t, Stierli bender 420HE Horizontal bending machine, with manual control and angle fine adjustment system Dcedpfx Aeflc Speckoh Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Dcjdpfjgqfmnox Ackoh Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: ready for operation (used), Year of construction: 2008, power: 11 kW (14.96 HP), stroke length: 180 mm, throat depth: 335 mm, Equipment: CE marking, Hydraulic press brake Manufacturer: DURMA, Type: E-30120 Year of manufacture: 2008 Dcsdpfx Acozbixkjksh Technical data: Manufacturer: Durma Type: E-30120 Year of manufacture: 2008 Press force: 120t Working length: 3050 mm Stroke of upper beam: 180 mm Throat depth: 335 mm Distance between uprights: 2550 mm Dimensions: approx. 3.25 x 2 x 2.65 m Connected power: 11 kW Weight: approx. 7,400 kg Equipment: • Amada tool clamping system • Durma DU 6000 control system • Sick C-4000 safety device • CNC-controlled crowning • Controlled axes: Y1, Y2, X • R axis + Z axes manually adjustable • 2 support arms, laterally adjustable • Tool package Upper die, straight, segmented approx. 3300 mm, R0.8 75° Upper die, bent, approx. 3300 mm segmented Lower die, 4-way block: V16, V20, V35, V50 All information without guarantee. The machine comes from the workshop of a Hamburg film studio. A demonstration with power supply is possible at any time.