Used Tester for sale (192)

Condition: good (used), Hommel roughness tester type T1000 Bjdpfx Ajvdwlgsfpjwh

Condition: not inspected (used), Chain tester Bsdpfx Asix Niljfpjwh

Condition: used, Optacom VC-10 Universal Measuring System Surface Roughness Tester / Contour Measuring Device Device is sold without PC and software (hardware only). Resolution in X and Z axes: 0.002 µm Resolution at the probe tip: 0.003 µm VC-10 measuring range horizontal/vertical (X-axis/Z-axis): 225 mm Measuring system: optical, incremental, and non-contact in all axes (X, Z, T) Accuracy: +/- (0.5 + L/100) µm Maximum measuring force: 10 - 150 mN Measuring speed: 0.1 – 2 mm/sec (automatically optimized) Probe tip radius: 0.002 – 1 mm Measurable slopes: 78° upwards; 87° downwards VC-10 dimensions (W x D x H): 950 x 380 x 725 mm VC-10 weight (approx.): 150 kg Description has been adopted as provided. You are welcome to arrange an on-site inspection. Upon request, we can organize affordable shipping for you! Bwedpfx Asybbd Ssfpjh You will receive a proper invoice. For international customers, a net invoice can be issued provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) * Bodpsqvcnnjfx Afpswh

Condition: good (used), Testing device for extension cables Bsdob A Iufjpfx Afpowh -Socket tester -Testing device for: extension cables, table sockets -Weight: 30 kg

Condition: used, functionality: fully functional, 2 double flank gear rolling testers / 2 devices Measuring device for gears to inspect gearing (intended for simple and fast inspection of gear teeth) Double flank rolling device for measuring gears, used special testing device for final inspection. 2 double-flank testers for final inspection, for simple and rapid detection of run-out or damaged spots (knocking sound) on the workpiece to be tested. Electromechanical drive, partly with clamping device Double-flank testing Price / details on request Bwjdpfx Afjhaqumepjh All technical specifications subject to errors and misprints. We sell exclusively to countries of the European Community.

Condition: like new (used), Atlas Xenotest Type: Xenotest Beta+ Weathering Test Instrument XENOTEST BETA+ – Material Testing Device / Weathering Tester with Humidification and Spraying System For sale is a professional XENOTEST BETA+ weathering tester from ATLAS Material Testing Technology GmbH. This device is designed to simulate sunlight, weather, and climatic influences and is used worldwide in research, quality control, and material testing. Features: - Professional equipment for UV and weather resistance tests - Ideal for laboratories, industry, and quality assurance - Fully functional, including comprehensive technical documentation Technical Data & Features: - Weathering and lightfastness testing unit with three air-cooled xenon lamps - XENOCHROME filter systems (300 / 320) for spectral distribution adjustment - Humidification and spraying system (ultrasonic humidifier, spray rods) - Measuring system with XENOSENSIV sensor for irradiance and black standard temperature measurement - Integrated touchscreen display for control and programming - Pre-installed standard tests (e.g., ISO 11341, ISO 4892-2, ISO 105-B02/B06), as well as freely programmable test procedures - Documentation capability via integrated printer (paper rolls) - Water reservoir (approx. 40 liters, for demineralized water) - Dimensions: approx. 900 × 1200 × 1800 mm (W × D × H) - Weight: approx. 400 kg - Power supply: 400 V (CEE 32 A, 5-pin) Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone. Bodpfxsw Thyko Afpowh

Year of construction: 2021, condition: excellent (used), Zwick / Roell Type: Mflow Application area: As testing volume increases, so does the need for a higher degree of automation (compared to the Cflow). The Mflow is a modularly expandable device that allows you to determine the Melt Mass-Flow Rate (MFR) and the Melt Volume-Flow Rate (MVR). The Mflow flow tester is, in its basic version, designed for MFR tests according to Method A and can be upgraded for MVR tests according to Method B. Testing according to the following standards is possible: - Methods A and B according to ISO 1133 - Methods A, B, and C according to ASTM D 1238 - ASTM D 3364 - JIS K 7210 Optionally, the Mflow can be equipped with pneumatic weight lift (with or without cleaning function) or weight placement. The Mflow can be operated either as a stand-alone unit using a modern touch display, or with ZwickRoell testing software via PC. Technical Data: Test load: 0.325 – 21.6 kg (depending on additional weights used) Compressed air (only required with optional pneumatic weight lift): 6 – 10 bar, oiled, dry Test temperature: +50 °C – +450 °C Display: capacitive touch display Temperature display resolution: < 0.1 K Temperature accuracy: < 0.3 K Number of storable parameter sets: > 100 Dimensions: - Height: 510 mm - Width: 360 mm - Depth: 419 mm Weight: approx. 43 kg Time measurement: - Error margin Method A: ± 0.02 s - Error margin Method B: ± 0.01 s Displacement measurement (Method B): - Error margin: ± 0.02 mm (ISO 1133) - Resolution: < 0.005 mm Bwsdpfxetq Em Te Afpjh PC connection: multi-device operation possible (up to 6 devices per PC) Power supply: 220 – 240 V / 50–60 Hz Power consumption: 2.6 A Software version: V4.2 Year of manufacture: 2021 Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance Z-axis: 500 mm, Rondcom 54-SD3 / ACCTEE PRO Form tester on a steel device base, including an air-bearing, high-precision CNC rotary table and motorized Z-column (Z=500mm), consisting of: Measuring unit E-RT-R531A Detector holder E-DT-R749A Stylus arm EM46000-S302 (diameter 1.6mm) Detector E-DT-R120A Interface controller PCB for PC operation ACCTee PRO roundness base software under MS WIN XP/7 Calibration sphere E-MG-R01A (roundness 0.05 μm) Tool set/gauge block set with factory certificate (1.47mm and 1.49mm) Fuse (1A), user manual, device inspection certificate CNC probe holder with offset height H=153 mm; Bodpsx Sckpjfx Afpjwh offset depth T=65 mm; suitable for R44/54 SD/DX with detector E-DT-R120A Accretech description: E-DH-R770B Z220 HP Workstation G1 - HP Single Unit (CMT) Packaging - HP Z220 CMT 400W 90% Efficient Chassis - Windows 7 Prof. 32/64bit OS - Intel Core i3-2120 3.3 3M 2C GT1 CPU - 4GB DDR3-1600 ECC (2x2GB) RAM - 500GB 7200 RPM SATA 6G 2nd HDD - ATI V4800, 1 GB RAM - Network connectivity - 16X SuperMulti DVDRW SATA 1st ODD 29-piece Stylus Set for Rondcom Three-jaw chuck E-WJ-R01C FX Base Frame Comfort Version Rondcom 44/54 Table dimensions 1076x1076x810mm consisting of: Closed base frame with 4 mounting points for air springs, Steel substructure, RAL 7035 color Integrated granite plate 1000x630x100mm All wooden elements melamine resin-coated, graphite black 3x side and rear cover plates 1x large wooden shelf with square cutout + 1x insert shelf Intermediate floor wood 2x front doors wood + additional adapter plates for higher load-carrying capacity due to heavy Z-column 1x monitor holder with column and folding arm Integrated air spring system 4x BiAir 0.25-ED-LT membrane air springs (vertical natural frequency approx. 2.5Hz) Load capacity at 6 bar: 170 kg 4x GDR 0.25-LT 1x mechanical-pneumatic level control MPN-LCV, reset accuracy ±0.1 mm 1x compressed air maintenance unit WFD-M 4x leveling elements BNRS 70/4 (leveling range 750mm +/-30mm possible) 4x M16 x 100 mm leveling screws 1x complete assembly of wooden cladding elements

Condition: ready for operation (used), JW Froehlich MFL 300 leak tester, front door fastening latch missing—see photo, SN:6/50 600.01, used, normal signs of use, 100% functional, scope of delivery as per photos. Bodpfex Etzxex Afpewh

Condition: used, Technical details: diameter: 20 mm workpiece length: - mm total power requirement: 2,3 - 3,0 kW open-circuit voltage: 2,8 V frequency: 50/60 Hz power consumption: 3 kVA connection voltage: 230 V control voltage: 15 (Gleichstrom) V dimensions of the machine ca.: 1,0 m weight of the machine ca.: 30 Kg dimensions L x W x H: 395 x 275 x 255 mm The crack tester consists of a portable housing with control and display elements, as well as connection cables for magnetization and a power plug. Area of application The crack tester is designed for surface crack testing of weld seams, large forged and cast parts, machine components, but also as a power unit for stationary crack testing benches. Only ferromagnetic workpieces can be tested! Bwjdpjw Rkybjfx Afpoh During magnetization, the workpiece must be sprayed with a test fluid (test medium). Defects can then be detected under UV light (UV lamp). *

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Bwjdpfxox N Rvno Afpoh

Condition: new, mileage: 100 km, power: 128.71 kW (175.00 HP), fuel type: diesel, overall weight: 8,550 kg, tire condition: 100 %, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, airbag, blind spot assist, central locking, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, start-stop system, tachograph, traction control, truck registration, Model: Mitsubishi Fuso Canter Roll-off Tipper MARREL AL4 Vehicle Type: 9C18 AMT Vehicle Category: Roll-off tipper Engine Power: 129 kW (175 HP) Wheelbase: 3,400 mm Permissible Gross Weight: 8,550 kg Electronic Stability Program (ESP) Disc brakes on front and rear axles with electronic wear indicator Front axle stabilizer bar Rear axle stabilizer bar Reinforced ladder-type chassis frame Height- and tilt-adjustable steering column mounting Multifunction steering wheel Reinforced vehicle battery, 2x 100Ah (2 batteries) Operating voltage, base vehicle: 12V Heated rear-view mirrors Sun visors for driver and passenger (inside the cab) Electric windows for driver and passenger doors Comfort single cab Tiltable cab Cup holder Over-windshield storage compartment, 1 section Entry assist handle on driver and passenger side Central locking with smart key Immobilizer with transponder Dwsc Tlfjx Ab Rgjkbtjf (untranslated, possible code) DUONIC© dual-clutch transmission Reversing warning system Seatbelt warning device LCD combination instrument cluster Front protection assistant Intelligent speed assistant Bwsdpex Rnrpefx Afpoh Attention assistant Blind spot assistant Main fuel tank 100 liters Plastic fuel tank LED fog lights Outline marker lights (according to ECE R7) LED daytime running lights Automatic light control with sensor Side indicator lights High beam assistant (Intelligent Headlight Control) Halogen headlights 12V, front Speed limiter 90 km/h, EU type approval Start/stop engine system Engine: R4, 129 kW (175 HP), 2,865 rpm OM5 engine specification, Euro VI OBD Step E, Canter OT0 Mastercode Scattolini OT6 dual battery cover OV2 Pre-wiring for battery isolation relay 12V Hill start assist Autonomous Emergency Braking System (AEBS) Lane departure warning system (LDWS) Digital tachograph 4.1a EU (2 drivers) Reversing camera Emergency brake light Alcohol tester interface Touchscreen DAB radio (6.95") Apple CarPlay, Android Vehicle cyber security Tire pressure monitoring system Active Brake Assist 6 Rear traction tires Valve extension for twin wheels Driver airbag SH6 driver comfort air-suspension seat, horizontal suspension Driver seat armrest Passenger seat, 2-seater Isringhausen seats, black fabric Axle ratio i = 5.714 (Canter) Vinyl floor covering Speedometer (mph and km/h) ABS with electronic brakeforce distribution Short mirror holder including wide angle mirror Automatic climate control Cruise control Power take-off, 200 Nm, for hydraulic pump Hand throttle engine speed control BODY TECHNICAL DATA Hook device 90 cm City System Marell AL4 A33 (Fassi Group) Length: 3,300 mm Load capacity: 4,000 kg EQUIPMENT Container protection: internal hydraulics Hydraulic distributor Hydraulic pump Oil tank Wide rollers ensure container stability Stainless steel hook frame Steel construction shot-blasted and epoxy primed Marker lights Work platforms 2 work lights Additional headlights Rear lamp cover frame Galvanized mesh box Plastic toolbox No hidden costs with us: - Delivery costs: 0 - Documents: 0 - COC: 0 - First inspection: 0 Financing or leasing FURTHER INFORMATION: Premium Kfz Outlet GmbH Fichtenhöhe 3 02829 Schöpstal OT Ebersbach Germany We are at your service: ONLINE SALES wir sprechen deutsch we speak English говорим по русски mówimy po polsku

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 25 mm, measuring range Z-axis: 1 mm, Well-maintained Mitutoyo surface roughness tester Surftest, model SV402. Measuring ranges: Z = 0.8mm, X = 50mm. Includes: Mitutoyo measuring stand with mounting plate, roughness reference standard, standard measuring probe 4mN, 90°, built-in printer. Bwodpfx Asx N Ukpofpoh Optional: Various measuring probes from €250, used vise €100. Price includes delivery within the EU.

Condition: used, Year of construction: 2019, gearing type: other, first registration: 01/2019, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Structure: Saxon brake tester B 99 GF-ECO A modern, fully digitalized brake tester, for trucks, buses, tractors, cars and commercial vehicles up to 15 tonnes permissible axle load, large test width and raised roller position for testing all-wheel drive vehicles, particularly small design for installation in existing foundations and for low depth, automatic test sequence with automatic assignment of axles, braking systems and ovalities, standard with automatic extension aid, soft starter for drive motors and remote control, manufactured exclusively in Germany according to DIN ISO 9001, type approval according to Directive 2011 in Germany, next test date 05/2025, always covered, ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! Bwedpfopccblox Afpsh - .

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, feed length X-axis: 13,000 mm, feed length Y-axis: 240 mm, feed length Z-axis: 100 mm, feed rate X-axis: 25 m/min, pressing force: 40 t, input voltage: 400 V, total height: 1,120 mm, working height: 1,120 mm, milling spindle length: 330 mm, control voltage: 400 V, workpiece height (max.): 100 mm, tool diameter: 240 mm, rotational speed (max.): 6,000 rpm, air pressure: 7 bar, total length of planing tables: 13,000 mm, We offer a fully automated production line for the manufacture of KVH structural timber. The line is fully certified with CE marking and by the Wood Technology Institute in Poznań. Compliant with ENPN 14.081 and 14.081 standards 1. Angled discharge conveyor 2. Infeed table for visual wood grading 3. Buffer before defect cutting saw 4. Automatic defect cutting saw with camera for fluorescent chalk 5. Buffer before finger jointing machine Bodexfzyyjpfx Afpewh 6. Finger jointing machine with glue applicator and cross-cut saw for lengths up to 13 m 7. Chain conveyor storage from finger jointing machine to four-side planer 8. Automatic infeed for four-side planer 9. Four-side planer Winter 6-33 10. Outfeed roller conveyor from four-side planer 11. Automatic packaging machine for planed timber 12. Chain conveyor 13. Strength tester for laminated timber

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, total width: 330 mm, total length: 570 mm, total height: 1,090 mm, overall weight: 70 kg, Equipment: documentation/manual, The Mecmesin OmniTest tensile/compression testing machine is a robust and precise single-column universal testing machine. Together with the VectorPro MT software, the OmniTest is an excellent choice for product research and materials testing. The sturdy and durable frame accommodates load cells ranging from 5 N up to 5 kN or 7.5 kN. Multiple load cells are available and can be quickly exchanged, allowing for tests to be performed across virtually any required range. Naturally, a wide range of testing setups is available. The tester is designed to deliver outstanding performance and ease of operation at an attractive price. Existing Mecmesin customers are already familiar with the reliable hardware, which is always robust and built for intensive use. VectorPro MT software is user-friendly and available in multiple languages, including Dutch. The intuitive graphical user interface enables any operator to quickly configure and perform tests. Delivery is limited to the Netherlands and Belgium. Key features include: – Simple operation – Load cells from 5 N to 7.5 kN – Software highly suitable for use with touchscreens – Multilingual software, including Dutch – Reporting to Excel, PDF, email, etc. – Various options such as extensometers available – 30 years of experience and satisfied customers – Includes 1-year warranty, commissioning, and training Bjdpfxjx Apg Aj Afpjwh – We select the grippers together with you (not included) A PC (touchscreen) shown in the picture is optional.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 101, Eddy current tester with automatic shaft inspection Bedsx Ezkhopfx Afpewh

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, screw diameter: 90 mm, overall weight: 11,000 kg, clamping force: 160 kN, total width: 2,200 mm, total length: 5,200 mm, total height: 2,200 mm, axle spacing: 250 mm, Equipment: documentation/manual, Hello, This offer concerns extrusion blow molding machines for PP, HDPE, PE, PE/PP, and HDPE/PP (canisters and bottles up to 6L capacity). Four complete machines are available, each equipped with all necessary accessories: compressors with tanks, chillers, scrap grinders with conveyors, color mixers, pneumatic pellet feeders, bottle conveyors, and a bottle leak tester. The machines feature the Moog Parison Controller system—an advanced control solution for plastic blow molding machinery that precisely regulates parison wall thickness, ensuring uniform material distribution in the mold. This results in improved product quality, higher durability, and reduced raw material consumption in the production of bottles and other packaging. Bwsdpfx Ajxhg N Ejfpsh The main control panel supports both Polish and English languages. Attached you will find a technical drawing of the blow mold mounting base and a video demonstrating the bottle production and transport process. - 4 sets available - Price per set: €36,000 - Special price for all four sets: €124,000 Main technical specifications of the machine: - Maximum product capacity: 6 L - Maximum output (blow cycles): 700 x 2 stations/hour - Screw diameter: 90 mm - Screw L/D ratio: 24:1 - Plasticizing capacity: 150 kg/h - Maximum extruder die diameter: 200 mm - Distance between die centers: 250 mm - Mold thickness: 195–580 mm - Maximum flat mold surface (W x H): 450 x 580 mm - Clamping force: 160 kN - Machine dimensions (L x W x H): 5.2 m x 2.2 m x 2.2 m - Machine weight: 11,000 kg

Condition: ready for operation (used), JW FROEHLICH MFL 300 leak tester SN:6/50 600.02, the locking cylinder of the front door is missing, see photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bsdpfx Aforv S Dqopjwh

Condition: new, Year of construction: 2025, functionality: fully functional, CCT1600L A-M Pressure tester for cylinder head and block – new machine. Hydraulic tray lifting, motorized tray rotation. Technical details: Max. cylinder head capacities: Lenght x Width x Height: 1350 x 425 x 300 mm Capacity of stainless steel tank: 500 liter Heating elements: 2 x 4,5 kw Hydraulic tray lifting Motorized tray rotation Hydraulic hoist: 0,75 kw Gear-motor: 0,25 kw Up and down travel time: 600 mm in 10 sec Thermostat: 0-90°C Power supply: 16kva-3x230v-ac-50/60hz Net weight approx: 600 kg Space requirements: Lenght x Width x Height: 2100 x 1050 x 1700 mm If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines Bjdpfx Afencd Ecepjwh

Condition: new, Year of construction: 2025, functionality: fully functional, Kwik-Way SVS2 Deluxe Valve grinder machine - new condition With rocker arm grinder. Technical details: Precision 6-ball chuck Accuracy: 0,005 mm Minimum valve stem diameter: 4 mm Maximum valve stem diameter: 14 mm Minimum valve stem length (approx): 85,73 mm Maximum valve head diameter: 100 mm Valve grinding wheel diameter: 178 mm Surface wheel diameter: 76 mm Spindle drive motor (H.P.): 0,37 kW Chuck drive motor (H.P.): 0,06 kW Coolant capacity: 3,8 ltr Chuck R.P.M. (approx.): 100 - 300 Grinding angles: 13° - 62° Bodonacu Dopfx Afpowh Main dimensions: W x L x H: 940 x 559 x 406 mm Weight: 141 kg If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm max. module 5 min. module total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Bwjdpjt Hw Ebjfx Afpjh Manual Two Flank Gear Tester

Condition: new, functionality: fully functional, PEG FM1 manual manual valve seat cutter. Bodpfexvc Nwjx Afpswh A cheap, precise solution for milling valve seats. Min. valve seat diameter: Ø 16 mm Max. valve seat diameter: Ø 65 mm Spindle stroke: 15 mm Rotation speed: 30 RPM - 100 RPM Power supply: 230V 1PH – 400V 3PH Motor power: 0.24Kw 1PH – 0.37Kw 3PH If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Helium leak detector Bsdpfx Afoc S D A Tspjwh Manufacturer: Pfeiffer Type: HLT 260 Condition: Tested and ready for use Connection: 230V Delivery time: ex stock (u.ue.V.)