Used Thermal Ctp for sale (1,413)

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) Itedpfx Apoytawns Don New TH 7 laser (August 2022) with only 2615 laser hours 2400 dpi Z-speed Total number of exposed printing plates: 395,443 pieces Minimum size: 483 x 394 mm Maximum size: 1600 x 2108 mm Material flow from left to right, Print Console enabled for all RIP software, Dell PowerEdge T330 server.

Condition: excellent (used), Different Heidelberg CTP Servo-controller for Suprasetter PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor for Suprasetter 74/75/105 Classic & A105 PL.572.3100-0x SCHNEIDER Servo Controller for Suprasetter A52/74/75 GEN. 1+2 Itsdjzwfzxspfx Ap Dsn PJ.105.100F/0x SCHNEIDER Servo Controller for Suprasetter A52/75 GEN. 3+4 (>2009) second-hand, tested All offer subject to prior sale

Condition: excellent (used), Year of construction: 2006, operating hours: 1,296 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (May 2023) with only 1296 laser hours 2400 dpi Z-speed Total number of plates exposed: 258,861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2108 mm Itedjyta N Dspfx Ap Don Material flow from right to left with Prinergy EVO 3 workflow, including dongle, Printconsole 5.1, and Dell PowerEdge 7330.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Ijdsx Exmtspfx Ap Detn Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Year of construction: 2022, condition: like new (used), Zebra ZE511 Thermal Transfer Print Engine Model: ZE51143-L0E0000Z Year: 2022 Brand new, unused, ex stores stock (open box) Itedszpy Abspfx Ap Den

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Iedpozpy Idjfx Ap Dotn Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: NETZSCH TDW 4240, For sale is a used NETZSCH TDW 4240 hot box test chamber from our testing center. This system is used to determine the thermal transmittance or thermal transmittance coefficient (U-value) of components and structures under defined temperature conditions. Typical applications: Windows Doors Ijdpezwf T Iofx Ap Djtn Facade and wall elements Panels and sandwich structures Other building envelope components Corresponding test openings are available for testing windows and doors. The system is particularly suitable for testing laboratories, research and development facilities, and manufacturers of windows, doors, facades, panels, and other construction products who wish to investigate the thermal properties of their products. Due to a realignment of our testing capacity, the hot box is being sold and can be acquired under very favorable conditions. Dismantling and transport: The system is currently located at our testing center. We would be happy to assist the buyer with dismantling, loading, and organizing the transport, as well as answer any questions regarding re-installation, and we can work together to find a suitable solution. An on-site inspection of the system is possible by appointment. We will gladly provide further technical information, photos, and documents upon request.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, KOPPENS BR 4500/600 | Continuous frying machine for thermal oil Manufacturer: Koppens Convenience Food Systems Model / Type: BR 4500/600 Serial number: 1219 Year of manufacture: 1998 Power supply: 400 V, 50 Hz, 3 phases, 27 A, 13 kW Working width of the belt: 550 mm Loading height: 925 mm Discharge height: 950 mm Machine weight: 1250 kg Oil heating system: Indirect - coil for thermal oil Maximum coil power: 180 kW Itedpfx Aszutgkop Den Chamber capacity (frying oil): min. 845 liters (max. level above the belt: 80 mm) Frying time: Continuously adjustable in the range of 25 - 250 seconds Belt speed: Continuously adjustable in the range of 1.08 - 10.8 m/min The industrial continuous frying machine Koppens BR 4500/600 is a highly efficient and uncompromising solution designed for professional meat processing plants, poultry processing, fish processing, and convenience food manufacturers. The machine is designed for continuous, immersion frying of a wide range of products – from nuggets, burgers, and breaded cutlets to croquettes and fish fingers. Thanks to the use of a 550 mm wide belt, the device offers a huge throughput while maintaining perfectly consistent quality and color of the finished product, eliminating the problem of undercooked or burnt batches. The heating system based on indirect heat exchange through a coil powered by thermal oil (up to 180 kW) is the most desirable solution in the industry. Unlike electric heaters, thermal oil guarantees a very stable and uniform temperature along the entire length of the frying tank. This protects the edible oil from localized overheating and excessive degradation (oxidation). The mechanical system for lifting the top cover (hood) provides immediate and safe access to the working area, allowing the crew to quickly inspect and effectively perform foam cleaning.

Year of construction: 2013, condition: like new (used), Thermal shrink machines are devices that allow for very rapid (3–5 sec.) shrinking of bags around the packaged product by immersion in hot water. ADVANTAGES: • Attractive product appearance • Process started by a button on the control panel • Digital temperature regulation • Optimal hygiene • Robust stainless steel construction • Possibility of using insulating balls to improve process efficiency • Base immersion enabled by hydraulic actuator movement TECHNICAL SPECIFICATION DT100 Machine dimensions: 880 x 1000 x 1320 mm Chamber dimensions: 600 x 800 x 220 mm Immersion depth: 220 mm Cycle time: 3–5 sec Ijdpfx Apsxx Tp He Dstn Weight: 155 kg Voltage: 400 V-3-50 Hz Power: 15.0 kW

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Itjdpfx Apszhkfqs Djn Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Vötsch Type: VT³ 7006 S2-M Air-cooled Technical data: Test specimen weight max. 20 kg Test volume: 60 liters Test chamber dimensions: width 380 mm, depth 430 mm, height 370 mm External dimensions: width 875 mm, depth 1970 mm, height 1895 mm Isdozima Hopfx Ap Detn Vertical arrangement of hot and cold chambers (chamber change via moving platform) Temperature range of the hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of the cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temperature deviation over time: ±0.3 K to ±1.0 K 80 mm pipe passage for measurement / supply of the test specimen Software SIMCONTROL for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 8.5 kW Rated current: 25 A Refrigerant R-404A R-23 Weight approx. 800 kg For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, CTS Temperature Shock Chamber / Temperature Test Chamber CTS TSS-70/130 Temperature Shock Chamber Water-cooled temperature shock chamber, approx. 130 liters For sale is a used temperature shock chamber from the manufacturer CTS Clima Temperatur Systeme GmbH. The test chamber is suitable for temperature shock tests, cyclic temperature tests, material testing, quality assurance as well as development and stress tests. Technical data Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TSS-70/130 Device type: Temperature shock chamber / Temperature test chamber Test volume: approx. 130 liters External dimensions: approx. 2335 x 940 x 1820 mm (W x D x H) Internal dimensions: approx. 1990 x 940 x 1652 mm (W x D x H) Test chamber dimensions: approx. 480 x 660 x 410 mm (W x D x H) Window: approx. 300 x 300 mm Weight: approx. 950 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -80 °C to +100 °C Temperature change rate: max. 100 K/min on average Changeover time: < 10 seconds Ramp-up rate: ≤ 15 min in the range of -65 °C to +200 °C Heating rate: approx. 6 K/min from room temperature to +180 °C Cooling rate: approx. 4 K/min from room temperature to -60 °C Temperature deviation (time): ±1 K Temperature deviation (spatial): ±2 K Power connection: 400 V 3/N / 50 Hz Power: 16.6 kW Rated current: 28.0 A Fuse rating: 32 A slow-blow Protection class: IP22 Refrigerant, precooling stage: R404A Refrigerant quantity, precooling stage: 4.0 kg Refrigerant, cooling stage: R23 Refrigerant quantity, cooling stage: 0.6 kg / 10 bar Operating pressure PS: 25 bar Water-cooled version Cooling water connection required Compressed air connection required Operation only possible with cooling water and compressed air Cooling water inlet: 3–6 bar Equipment CTS control panel Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display RS232 interface RS485 interfaces Potential-free contact Digital inputs and outputs Hot and cold chamber Mobile frame with screw drive Test chamber / mobile frame made of stainless steel Insert tray made of stainless steel wire Pipe penetration NW 50 with sealing plug Compressed air connection 1/4" male thread Condensate drain R 1/2" female thread Safety door locking Lockable door with viewing window Documentation / operating manual Accessories according to images Application areas Temperature shock testing Cyclic temperature testing Material testing Electronics testing Component testing Aging tests Quality assurance Research and development Condition Used Optical condition according to images Scope of delivery 1x CTS TSS-70/130 temperature shock chamber Insert tray / test chamber equipment Available documentation / documents Operating manual Accessories according to images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Objects, machines or other accessories shown in the images that are not explicitly described are not included in the scope of delivery. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone. Iedpfszf Ibkex Ap Detn

Condition: good (used), Year of construction: 1999, Nema NCG 4390 S Temperature Shock Chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temperature Range: -40 °C to +180 °C Dew Point Range: +5 °C to +89 °C Iedpfjuzgt Eex Ap Dstn Supply Voltage: 400 V Rated Current: 32 A Rated Power: 15 kW Refrigerant: R 404 A Year of Manufacture: 1999 Weight: 2720 kg External Dimensions: W 3950 x D 1700 x H 2280 mm Internal Dimensions: W 3000 x D 1300 x H 1170 mm WLG STEAM-O-MAT Electrically-controlled automatic steam humidifier and generator for mineral- and odor-free steam Manufacturer: WLG STEAM-O-MAT Type: EDB 8 Heating Voltage: 400 V Power: 6 kW Steam Output: 8 kg/h Water-cooled Condenser Manufacturer: Bitzer Water-cooled Supply Voltage: 400 V Rated Current: 13 A Rated Power: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2001, Used Ecotack thermal laminating machine Maximum sheet format: 102x142 cm Isdpfozt R Enjx Ap Djtn Maximum speed: 75m/ minute Complete with vacuum register station Calender diameter: 450mm with oil heated central Roll elevator Automatic separator Spared rubberized roller Automatic separator Cooling roller with refrigerator Corrugated for light paper Automatic stacker

Condition: ready for operation (used), A good used Thermal Transfer overprinter from Open Date Equipment Ltd - model 107L - intermittent motion TTO with a large print area of 107 x 160mm - complete with frame power supply - keyapd - software and cables. Isdpjyg Nlujfx Ap Dstn Manuals available Ready to ship worldwide Export documentation available Request additional images and videos via Whats App

Condition: used, Mettler Toledo Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for the thermal analysis of materials. The instrument combines thermogravimetric analysis (TGA) and differential calorimetry (DSC) in a single system and is ideally suited for applications in industry, research, materials testing, and quality assurance. Functions & Applications Ijdpfx Apozix Ddj Djtn Thermogravimetric analysis (mass changes) DSC analysis (heat flow, melting points, Tg) Analysis of plastics, polymers, chemicals, pharmaceuticals, and materials Temperature and time-dependent measurements High precision and stability Network and PC compatible (STAR® system) Technical data (approximate) Dimensions: approx. 500 × 500 × 600 mm Manufacturer: METTLER TOLEDO Model: TGA/DSC 1 STAR® Sensor type: SDTA FRS2 Power connection: 100–240 V / 50–60 Hz Power consumption: approx. 300–600 W Weight: approx. 35–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, feed rate X-axis: 1 m/min, total height: 1,750 mm, total length: 1,400 mm, total width: 1,250 mm, quill diameter: 60 mm, space requirement width: 1,500 mm, space requirement length: 1,500 mm, space requirement height: 1,800 mm, distance table center to spindle nose: 590 mm, spindle stroke: 130 mm, workpiece weight (max.): 400 kg, Equipment: rotational speed infinitely variable, HENRI HAUSER OP3 High-precision drilling machine / jig boring machine with extensive accessories. Includes tools worth over 12,000 EUR! Made in Bienne/Biel, Switzerland Excellent condition! Coordinate drilling machine / jig boring machine with tool package (see photos) in very well-maintained, exceptional condition, second owner (41 years in current ownership). This quality will never be produced again! The coordinate drilling machine features the rare option of motorized table drive / rapid traverse in the X and Y axes and a potentiometer. The stepless feed in the X axis also allows for light milling and surface milling. This eliminates the need for laborious manual cranking, as is the case with all other Hauser coordinate drilling machines. Furthermore, it has the rare thermal stabilization and expansion compensation. For this purpose, 2 heaters are provided, which can and must be switched on separately before starting work and to maintain high accuracy and dimensions. This explains the factory-high positioning accuracy of 0.002 mm with a resolution of 0.00. It should be noted that the machine has two Heidenhain digital displays with a total of 4 glass scales with 1My resolution, also for the quill feed. This is a major advantage for precise drilling and surfacing in depth with Wohlhaupter, spindle tools, etc. With the mentioned options and in this first-class condition, it is very rare and highly unlikely to be available again. These machines are mainly used in the watch industry, gunsmithing / defense industry, precision engineering, material testing and the optical industry, where the highest precision is required. Also ideally suited for engine construction / overhaul, special machine construction, etc. All documents, manuals, electrical diagrams, etc. are available in their original form! Technical data: Table length 550 mm, table width = 320 mm, longitudinal travel X axis = 400 mm, transverse travel Y axis = 250 mm, Vertical travel Z axis = 400 mm Max. workpiece weight on the table = 400 kg, spindle connection MK 2, stroke of the drilling spindle (Z axis) = 130 mm Distance table to spindle = 590 mm, spindle speeds stepless from 60 rpm to 3000 rpm Feeds: Drilling spindle slide: 2 steps from 0.03 mm/rev to 0.06 mm/rev Iedpezuvwlofx Ap Dstn Connection 50 Hz 3x 380 Volt, spindle motor 0.80 hp Machine dimensions: Length = 1400 mm, width = 1250 mm, height = 1750 mm, machine weight approx. 1500 kg. Payment for the machine is made, as is customary for used machines, net before loading, no partial or installment payments! Special price due to business closure. Shipping (direct transport without reloading) within the EU is possible. Price net export within EU. Example: Secure shipping by direct transport (without reloading!) to France / Spain / Italy, etc. up to 1700 km driving distance approx. 1100 - 1450 EUR.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 50040212, total width: 1,000 mm, total length: 1,000 mm, total height: 2,300 mm, type of input current: AC, Equipment: documentation/manual, 4x Automatic Print & Apply Labeling Systems Bluhm Weber Group LEGI-AIR 4050E / 4050E NC(V2) – incl. Zebra ZE500 printer and documentation For sale are four high-quality, automatic label printing and dispensing systems (Print & Apply) from Bluhm Weber Group (Weber Marking Systems), model series LEGI-AIR 4050E. These robust, modular systems are designed for continuous industrial operation in logistics and production. All units feature integrated Zebra ZE500 thermal transfer/thermal direct printers and complete documentation. Condition: fully functional, only dusty. Overview of the systems: Iedpez Sbagsfx Ap Djtn 2x LEGI-AIR 4050E NC(V2) – Top Apply Labeling System – Automatic labeler, top application Zebra printer ZE500 Pneumatic, height-adjustable 900–2200 mm Label format: 150 × 110 mm Type designation, among others: 30 – RH – ZE543 – LK400 Connection: 100–240 V AC / 50–60 Hz / 700 W / 6 bar Year of manufacture: 04/20 Dimensions (L × W × H): approx. 1000 × 1000 × 2300 mm Price: €5,900 each net (2 units = €11,800 net) 1x LEGI-AIR 4050E – Top Apply Labeling System – Automatic labeler, top application Zebra printer ZE500 Pneumatic, height-adjustable 900–2200 mm Label format: 150 × 110 mm Connection: 230 V AC / 50–60 Hz / 567 W Year of manufacture: 06/14 Dimensions (L × W × H): approx. 1000 × 1000 × 2300 mm Price: €3,900 net 1x LEGI-AIR 4050E – Side Apply Labeling System – Automatic labeler, side application Zebra printer ZE500 Pneumatic, height-adjustable 400–1500 mm Connection: 230 V AC / 50–60 Hz / 567 W Year of manufacture: 08/14 Dimensions (L × W × H): approx. 800 × 1200 × 1700 mm Price: €3,500 net Technical highlights of the LEGI-AIR 4050E series (according to the manufacturer): Modular design with a wide range of applicators (including tamp-blow) Dispensing rate up to 240 labels/min. (depending on format, text and stroke) Printing speed up to 400 mm/s Positional accuracy typically ± 0.8 mm Label sizes standardly approx. 12.5 × 7 mm to 160 × 210 mm (special formats possible) Reduced compressed air consumption through modulated vacuum Made in Germany, robust for continuous industrial operation Terms of sale: Delivery and collection possible by arrangement. Location: 41564 Kaarst-Holzbüttgen. Documentation for the respective systems is available. We will gladly provide you with further information, pictures and detailed documents upon request. Inspection possible by arrangement.

Condition: used, functionality: unexamined, Used Netzsch thermal analyzer set consisting of a computer with components and software, analyzer (STA 409 EP), controller (TASC 414/3), and power supply (Pu 1.851.405). Manufacturer: Netzsch Model: STA 409 EP | TASC 414/3 | Pu 1.851.405 Voltage: 230V (50/60Hz) Itsdpfx Apozv Snie Dsn

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Based on these cyclical loads and accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving carriage All-round grids in the moving carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber can be used as a temperature cycling device Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Ijdewbdv Sopfx Ap Dstn Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Refrigerating unit: Water-cooled Weight: approx. 940 kg Year of construction: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Itedpfx Asw Hxgvop Don Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: good (used), Year of construction: 1996, BERTRANS HT594 THERMAL OIL BOILER Automatic vertical thermal oil boiler manufactured by BERTRANS, equipped with a WEISHAUPT modulating burner. TECHNICAL DATA Manufacturer: BERTRANS Model: HT594 Boiler type: Thermal oil boiler Configuration: Vertical Operation: Automatic Thermal oil volume: 6.01 m³ Maximum working pressure: 35 bar Manufacturing number: M1101009/IB Burner manufacturer: WEISHAUPT (2003) Burner model: WKG 3/0-A ZM Itjdjzvf Rkopfx Ap Dsn Burner output range: 1,200–12,000 kW Burner serial number: 4,177,116

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ab0307002198, Autobag AB 180 OneStep – fully automatic bag packaging machine with thermal transfer printer Year of manufacture: 2007 | Location: 41564 Kaarst-Holzbüttgen Delivery and collection possible by arrangement. For sale is a used Autobag AB 180 OneStep (Automated Packaging Systems) – a proven, robust, and flexible bag packaging machine with an integrated thermal transfer printer. Equipment: • STANDARD SEAL FLATTENER • STATIC BACK SHELF (NO SUPPORT) • AB180 ONESTEP 203 dpi PRINT KIT (Thermal transfer printer PI-412c) • FUNNEL SIZE A12 Itjdpfsz Spqxjx Ap Don • BD100 (Orange Loop / Bag De-aerator) Also included in the scope of delivery: 1 box with 13 film rolls (Autobag chain bags) Mode of operation (manufacturer's description): The AB 180 OneStep feeds an Autobag chain bag unwound from a roll through the printer, opens it by means of compressed air, and prepares it for filling. The products are placed manually or via feeding systems into the bag. Subsequently, the bag is sealed using a foot switch or automatically. The integrated thermal transfer printer eliminates the need for offline labeling – printing and packaging are carried out in one step (“Print-n-Pack” / Next-Bag-Out technology). Ideal for fulfillment, mail order, spare parts, small and medium-sized series with frequent product changes. Technical data (according to the product data sheet): • Weight: 142 kg • Dimensions: approx. L 1,700 × W 850 × H 1,150 mm • Electrical: 110/220 V, 50/60 Hz switchable • Compressed air: 150 l/min at 5.5 bar (dry, clean air) • Passage: up to 108 mm • Bag thickness: 35–100 µm • Bag sizes: width 50–270 mm | length 140–630 mm • Performance: up to approx. 30 bags/minute (with printing) We will gladly send you the product data sheet and other documents upon request. If you are interested, I look forward to hearing from you – I will be happy to prepare an individual offer for you, including shipping costs.

Condition: excellent (used), MECALSA Continuous Industrial Fryer with Thermal Oil – Stainless Steel MECALSA continuous industrial fryer with a thermal oil heating system, designed for the continuous frying of food products in medium and high-capacity production lines. The equipment features a longitudinal process tank and a transport system that allows the product to remain in the oil for a controlled residence time. Indirect heating via a thermal oil circuit provides the necessary energy to the process while keeping the thermal fluid separate from the frying oil. Its construction, primarily in stainless steel, along with vapor extraction and process control systems, makes it particularly suitable for professional installations in the food industry. MAIN FEATURES -Manufacturer: MECALSA -Type: Continuous industrial fryer -Heating system: thermal oil -Continuous frying process -Longitudinal frying tank -Automatic product transport -Adjustable residence time depending on configuration -Circulation and control of frying oil -Independent thermal oil circuit -Indirect heat exchange Itjdpfxozxwxxe Ap Den -Temperature control -Piping and valve system -Vapor extraction system -Extraction hoods and ducts -Control electrical panel -Construction primarily in stainless steel -Industrial structure for continuous operation -Access points for inspection, cleaning, and maintenance -Integrable into automatic processing lines PROCESS The product is continuously fed into the MECALSA fryer and guided through the frying zone by the internal transport system. During this process, the product remains in contact with the frying oil at a controlled temperature for the time needed to achieve the required final characteristics of cooking, color, and texture. Heat is supplied through a thermal oil circuit, which transfers energy to the system without directly mixing with the oil used for frying the product. The vapors generated during frying are collected by the hoods and channeled to the extraction system. APPLICATIONS Especially suitable for manufacturers of pre-fried products, processed vegetables, potatoes, snacks, breaded products, and other food preparations that require a continuous frying process. Depending on the installed configuration, it can be used for: Potatoes and related products Vegetables Breaded or battered products Prepared meat products Fish and fish products Snacks Pre-cooked products Other specialties compatible with continuous frying It can be integrated with feeding systems, scalding units, dryers, conveyors, excess oil removal systems, coolers, IQF freezers, and packaging equipment. The combination of MECALSA technology, continuous process, and thermal oil heating provides an industrial solution for lines requiring uniform and controlled frying. Machine available for inspection. Additional technical information, production capacity, operating temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, This listing is for 1 of 3 Roche LightCycler II Thermal Cycler Itsdpoxzguhsfx Ap Djn