Used Thermal Ctp for sale (1,334)

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Hfjdpfxov Si Szj Af Ask Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced Hfodevf Ig Djpfx Af Ask

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: PJ000016, (processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 Hodpfx Afjvw Afxo Ajfk integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, external compressed air supply required XXX – suction device for removing plate particles Workstation MetaDimension 4/8-up Prinect SignaStation 1.5 74 Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: PJ000400, Type: PJ.003.0000 Print plate size (mm): 240 x 240 up to 670 x 525 Plate thickness (mm): 0.15 to 0.30 Equipment / Additional information: G & J stacker Software, RIP, Computer The machine has 1 laser head with 64 diodes Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg. Hodpfjpahr Aox Af Aofk

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 023910293, Speed: 20 plates /h Counter: 69'068 plates Format (cm): 50x70 Hfjdperigkhofx Af Aok Equipment / Additional information: With Server, Trueflow Software with integrated plate punch with 40 laser diodes (individually replaceable) -Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: good (used), approx. 7 pieces Sato printer CG408DT-LAN thermal printer with LAN connection | label printer - used - : Price per piece from location: only €85 (net)! Manufacturer: Toshiba Type: CG408DT-LAN Year of manufacture: unknown Sato printer CG408DT-LAN - label printer with LAN connection Sato printer CG408DT-LAN, a reliable thermal printer for professional labeling in various areas of application such as warehouse, logistics or office. The LAN connection means the printer can be easily integrated into the network, which ensures flexible use. Product details: • Model: Sato CG408DT-LAN • Print technology: Thermal printing (direct thermal printing) • Print resolution: 203 dpi • Print speed: Up to 152 mm/s • Media width: 25 mm to 112 mm • Connection: LAN connection (network capable) • Areas of application: Label printing for logistics, shipping, warehouse, retail The printer is in perfect condition and offers high print quality with fast turnaround times. Ideal for a variety of label formats. Condition: good Available: immediately Location: Braunschweig Hjdpovx E Rajfx Af Ajfk

Condition: ready for operation (used), Kodak Thermal Imaging Head Part-Number R507-00134A • 50W 630nm • 10mW 680nm Hfodoiy Nx Ajpfx Af Ajk

Condition: used, A good used Thermal Transfer Overprinter from Domino - Model V320i with Touch Screen Controls & Printer mounting Frame Hsdowmfp Depfx Af Aofk

Condition: new, T63290IO - Armor INKANTO thermal transfer ribbon, AWR 470 wax, 90mm, black INKANTO thermal transfer ribbon, AWR 470 wax, roll width: 90mm, core: 25,4mm, length: 450m, color: black Hfedpjk Abhasfx Af Aok

Condition: used, This listing is for the Bio-Rad C1000 Touch Thermal Cycler. The unit is in full working condition and ready for immediate use. Compact and reliable PCR thermal cycler featuring touchscreen control, precise temperature performance, and flexible protocol programming for molecular biology, genomics, and laboratory research applications. Transparency Report and Technical Audit: Hodpey Sf S Aofx Af Aofk • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2018, Manufacturer: EISENMANN, Type: 2860, Year of construction: 2018, Serial No. 81-231-F01, Heating medium: natural gas, Heating value: 10 kWh/Nm³, Exhaust gas volume: 35,000 Nm³/h, Reaction temperature: 730 °C, Burner heating capacity: 4,250 kW, Control system, Total boiler length: approx. 15 m. Hfjdpfxey Ua Evj Af Ajk

Condition: used, This listing is for the Techne TC 3000 Well Thermal Cycler The unit is in full working condition and is ready for immediate use The Techne TC‑3000 (models FTC3/02 and FTC3/05) is a compact, robust, and cost-effective PCR thermal cycler, ideal for personal use, educational settings, and basic molecular biology research. Despite its small footprint, it delivers high performance, reproducibility, and flexibility. Key Features Compact and Low Cost One of the smallest and most affordable thermal cyclers on the market. Weighing ~5 kg with a footprint of just 33 × 17 cm, it's perfect for labs with limited space. Available with interchangeable blocks: FTC3/02: 25 × 0.2 mL microtubes FTC3/05: 20 × 0.5 mL microtubes Fast Peltier-Based Cycling Efficient thermal transfer with rapid heating (up to 3.6 °C/s) and cooling (up to 2 °C/s) using advanced Peltier elements. Heated Lid with Selectable Temperature Adjustable from 100–115 °C, the heated lid minimizes condensation and reduces the risk of sample evaporation. It can be enabled or disabled as needed, making it suitable for a range of PCR tubes and strip types. Hedpfxexhfzae Af Asfk Unparalleled Block Uniformity Delivers consistent results with ±0.1 °C block uniformity at 50 °C, ensuring optimal reproducibility across samples. Wide Temperature Range From 4 °C to 99 °C with precision control (±0.1 °C), supporting even demanding PCR protocols.

Condition: excellent (used), Heidelberg Supersetter 74 Maximum size: 760 x 680 mm Minimum size: 370 x 680 mm Hedpjurnzqofx Af Aefk

Condition: used, This listing is for PCR Max Alpha Thermal Cycler Hfjdpsy Hw Skofx Af Aek The unit is in full working condition and ready for immediate use Compact and efficient thermal cycler designed for accurate DNA amplification. Features intuitive controls, uniform temperature distribution, and dependable cycling performance suitable for molecular biology workflows. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: ready for operation (used), functionality: unexamined, machine/vehicle number: Pro Coil E-18/9, Thermaflex ThermaSmart PRO Coil E-18/9, thermal pipe insulation in box. Lot of 65 boxes. Diameter: 18mm Thickness: 9mm Hedpfsw Hzu Ajx Af Ajfk Length: 23m

Condition: used, This listing is for a Seiko DPU-414 Thermal Printer. The unit is in full working condition and is ready for immediate release. The Seiko DPU-414 is a compact and portable thermal printer designed for high-quality monochrome printing in diverse applications, particularly suited for point-of-sale environments and temporary document printing. Key Features: - Printing Technology: Utilizes direct thermal printing technology, which eliminates the need for ink or toner, leading to lower maintenance costs. - Print Resolution:Offers a print resolution of 203 dpi, ensuring clear and sharp text and graphics. - Memory: Equipped with 1 MB of memory, allowing for efficient handling of print jobs and data processing. - Connectivity Options: Features both serial and parallel connectivity, making it versatile for integration with various devices and systems. - Compact Size: Designed to be lightweight and portable, measuring 6-7/10 inches in depth, making it ideal for mobile applications. - RoHS Compliant: Complies with RoHS standards, ensuring it is environmentally friendly and safe for use. - Cost-Effective: Provides a highly cost-effective printing solution, especially suitable for businesses looking to minimize operational costs. Hfodpfxoxxym Sj Af Ask Product Specifications: - Manufacturer: Seiko Instruments U.S.A., Inc. - Model: DPU-414 - Type: Thermal Printer - Maximum Resolution: 203 dpi - Memory: 1 MB - Brand Name: Seiko - Eco Label Standard: RoHS

Condition: used, This listing is for 1 of 2 Roche LightCycler 1.5 Thermal Cycler Hfjdpoxzgunjfx Af Ask

Condition: used, This listing is for a Clearmark ICE Viper plus Thermal Inkjet Coder with Stainless Steel Conveyor Hfsdpfxsxzg Hws Af Ask

Condition: used, This listing is for 1 of 2 Roche LightCycler 2.0 Thermal Cycler Hsdpfxexzgt Rs Af Ajfk

Condition: used, This listing is for a Roche LightCycler II Thermal Cycler Parts Only Hfedpfx Aexzgubjf Aek

Condition: used, This listing is for 1 of 3 Roche LightCycler II Thermal Cycler Hfsdexzguhspfx Af Aok

Condition: used, Year of construction: 2005, The SCREEN PTR 4100, manufactured in 2005, is a dependable computer-to-plate system designed for high-quality plate imaging. With a maximum plate size of 830 x 660 mm, it provides consistent and precise output for professional offset printing environments. This unit is equipped with a Heidelberg Autoloader for efficient plate handling, a Xitron RIP with dongle for accurate workflow and imaging control, and a stacker for streamlined plate management. Currently located in Germany and still in operation at a printshop, the SCREEN PTR 4100 combines robust engineering with automation features, making it a reliable solution for printshops seeking accuracy, productivity, and ease of use in plate production. Format: 830 x 660 mm Max. Size: Plate size: Min 324 x 370 Speed: Speed: approx 10 plates/h Equipment: Hodpfx Aew U Dt Ajf Asfk 4-up Thermal PlateSetter - 16 channel infrared laser diodes Resolution: 2400 dpi Autolader Including Xitron Rip with dongle Punching device Blower Unit 7846 Hours The diodes are in very good condition, as can be seen in the pictures.

Condition: like new (used), Gea CFS Koppens Thermal oil fryer BR 3500/600 Suitable for thermal oil heating; Net belt length: 3.500 mm Net belt width: 600 mm Machine dimensions (LxWxH): 6.000x900x1.600 mm Machine weight: 750 kg. Capacity: 250 kg/h in 600 liter oil Hodokvni Ajpfx Af Aefk

Condition: like new (used), Year of construction: 2020, We offer this second hand IWT Moldrup-SPP Hydro-Thermal Treatment Plant Industrial MOLDRUP-SPP plant designed for hydro-thermal modification of timber up to 2,600 mm diameter and 12,000 mm length. Built in heavy-duty stainless steel and engineered for continuous industrial production with fully automatic PLC control. Industrial Hydro-Thermal Wood Modification Plant – Ø2,600 x 12,000 mm Hodeymxqaepfx Af Asfk Industrial hydro-thermal treatment plant designed for efficient and uniform thermal modification of timber in a controlled oxygen-free environment. The plant is built around a heavy-duty Ø2,600 mm × 12,000 mm stainless steel autoclave, handling approximately 15–22 m³ of timber per charge, with operating pressure up to 12 bar (abs). Fully automated via PLC, the system enables precise control of vacuum, pressure, temperature and multi-phase process cycles. The integrated vacuum system ensures safe oxygen removal, while the thermal oil heating system provides accurate temperature management throughout the treatment process. The complete installation includes pressure vessel, heating system, vacuum pump, circulation fan, condensate handling, trolley loading system and safety equipment. Thermal oil boiler skid and emission control equipment are included. Technical documentation available on request. The complete hydro-thermal wood treatment plant is sold as seen / as is. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total width: 2,350 mm, total length: 6,000 mm, inner dimension length: 3,000 mm, inner dimension width: 1,600 mm, TECHNICAL DETAILS Oven dimensions: 3,000 x 1,600 mm MACHINE DETAILS External dimensions (L x W): 6,000 x 2,350 mm Firing: Gas Orientation: Vertical, for use with vacuum bags; connection to vacuum port inside oven EQUIPMENT 2 x trolleys included The following data is from a general offer; the seller accepts no liability for its accuracy. This also applies to the data sheet in the appendix. Electrical Voltage: 400 V Hfsdpfx Aexur Ndof Ajk Current: 16 A Frequency: 50 Hz Gas Type: Natural gas / Propane / LPG Connection: 1"1/4 Gas pressure: 20–60 mbar Propane/LPG consumption (4 burners): 8 kg Propane/LPG consumption (8 burners): 16 kg Natural gas consumption (4 burners): 9.6 m³ Natural gas consumption (8 burners): 19.2 m³ Temperature range (4 burners): 40–150 °C Temperature range (8 burners): 40–320 °C Power output (4 burners): 96 kW Power output (8 burners): 192 kW