Used Thermal Plate Processor for sale (13,901)

Condition: used, functionality: fully functional, Micro and mini plasma welding generator, complete with torch and power cables. Suitable for welding stainless steel with thicknesses ranging from 0.5 to 1.00 mm. Power supply: 380-41.5V (12A). Maximum welding current: 150A, with a welding speed of 5 to 10 mm/sec. Dkjdozlud Ejpfx Ap Ieu

Year of construction: 2004, condition: used, Colour: Yellow Empty weight: 545 kg Dkjdpfoz N Hg Ssx Ap Ieu Dimensions (LxBxH): 189 x 66 x 107 cm Availability: in stock

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm Dodpfx Aey Aubusp Ieku hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent Dkedpfez Hngmsx Ap Iju • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Year of construction: 2016, condition: used, functionality: fully functional, Two Dybvad plate freezers are available for sale from our location in 45891 Gelsenkirchen. These plate freezers are used and come from a business liquidation. Currently, the plate freezers are still connected to the power supply and can be inspected after scheduling an appointment. For technical specifications, please contact the manufacturer. Dodpfx Aoz I Abnsp Ieku Disassembly and loading are the responsibility of the buyer.

Condition: like new (used), Year of construction: 2021, Hydraulic 4-roll bending machine Digital display of roll positions Capability to form cones Dksdpfxsz I D Age Ap Isu Length: 3050 mm Diameter of upper rolls: 220 mm Diameter of side rolls: 180 mm Bending capacity: 7 to 8 mm with a minimum radius of 1000 mm Machine dimensions: 4700 x 1100 x 1330 mm Weight: 5700 kg Operating videos available upon request.

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, feed length W-axis: 1,600 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Dksdpfxjz Iy Ncj Ap Isu Additional information incl. 15 plates

Condition: new, Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Dsdpfx Asz Iy Nvsp Ieku Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Dkodpfx Aox Exmtep Ieu Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg You can find more new and used items in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2016, operating hours: 100 h, functionality: fully functional, Scraping straightedge made of grey cast iron L1000xB130 mm Price €150.00 Scraping straightedge made of grey cast iron L1000xB50 mm Price €100.00 Scraping straightedge made of grey cast iron L1000xB50 mm Price €100.00 Surface plate made of hard stone L680xB150 mm Price €100.00 Measuring cylinder D85 x L300 made of hardened steel Price €100.00 Surface plate with 2 handles L250x80 mm Price €20.00 Square surface plate 75x75x150 Price €100.00 Round surface plate D170 mm Price €20.00 Euro pallet with base and frame €30.00 Dodpfeyxywysx Ap Ieku All items can also be purchased individually No guarantee is given for condition, straightness, or accuracy

Year of construction: 2019, condition: good (used), Venjakob RNV 2.0 Exhaust Gas Cleaning System This system incinerates gaseous pollutants and odors from the production exhaust air, releasing clean air into the environment. Extraction: Solvent-containing or odor-laden process air (e.g., from painting systems, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to a very high temperature. Combustion (Oxidation): In the combustion chamber, the natural gas inlet (the pilot burner) ignites the air. At a temperature of up to 850 °C, the organic pollutants (VOCs) completely break down into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy Recovery: The cleaned, hot air then flows through a second ceramic bed and releases its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as after the start-up phase, hardly any additional gas needs to be supplied. System Data Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of Construction: 2019 Manufacturing Number: 15212 Throughput Volume: 2,000 Nm³/h Gas & Combustion Gas Type / Heating Value: Natural Gas H / 10.4 kWh/Nm³ Firing Heat Output Range: 30 kW Flow Pressure: 200 - 1,500 daPa Max. Combustion Chamber Temperature: 850 °C Electrical Connections Grid Connection: 400 / 230 V AC Djdpfx Apozrl Ibj Ieku Connected Load: 24 kVA Current Consumption: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More articles – new and used – can be found in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm Djdpfsz Hd R Iox Ap Ijku plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: good (used), Used horizontal boring mill/drilling machine by Cornac Type BS 65 Spindle diameter 65 mm Table dimensions approx. 600 x 1000 mm Dkodpfx Asz Iarqep Iou X / Y / Z = 1000 / 800 / 650 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, A NELA plate bending machine (printing plate bending device) is a professional bending device for offset printing plates, manufactured by the German company NELA Brüder Neumeister GmbH. These systems precisely shape printing plates into the required form, ensuring a perfect fit into the cylinders of offset printing presses. Compatibility: NELA manufactures bending devices specifically tailored to the requirements of major printing press manufacturers. Models like the HD/Nela SM 102 B, which are optimized for Heidelberg Speedmaster (SM 52, SM 74, SM 102) as well as XL machines, are particularly common. A Heidelberg NELA plate punch (also called a printing plate punch, plate perforator, or hole punch) is an essential precision tool in prepress. It is used to punch register holes or cutouts precisely into offset printing plates. This ensures flawless clamping and perfect alignment (register) of the plates in Heidelberg printing presses. Dkjdpsz It Sksfx Ap Iou Compatibility: Specifically designed for Heidelberg machine series such as the Speedmaster (SM) 52, 74, and 102. Hole spacing: Flexible configurations with variable hole spacings, such as 425 mm and 780 mm (for Autoplate systems), are common.

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T Dsdpjz H Iymjfx Ap Ieku

Condition: used, Year of construction: 1996, gebraucht 1996 090232 ca. 2 Wochen ab Auftragse Türkei 16900 € 1 3100 mm 6 mm 19 1/min 1.5 ° 14 1000 mm 15 kW 200 l 3700 mm 2250 mm 2700 mm 1830 mm 5600 kg Swing-beam cutting design Motorized backgauge (1000 mm) with digital display Footpedal Central manual blade gap adjustment Cutting line illumination Wide support table with transfer balls 1 side gauge with scale, T-slot, and flip-stop 2 sheet support arms with T-slots Oil fill Light curtains at the rear of the machine THE BLADES WERE GRINDED Operating manual in German with EC Declaration of Conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. Dsdpfsz Ikvmox Ap Ijku • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Marble plate STIEFELMAYER Dkedpfx Aez H Izdep Isu Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available.

Condition: excellent (used), Year of construction: 2011, 348 USED Heuft thermal oil ovens. Djdpfxjzxp Dyo Ap Ieku Year of manufacture (deck oven): 2009 Year of manufacture (rack oven): 2011 EQUIPMENT: - 1 Heuft rack oven, model VTR 10.12.5.09, for 60x100 cm trays - 1 Heuft deck oven, model VT0 216 33, with a baking area of ​​15 m² (oven features temperature zoning for 3+3 decks) - HK 200 heating boiler - Trolleys for rack ovens The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: used, Steel floor plates Dkodpfx Apsz H Iyys Iju Length: 2210 mm Width: 1500 mm Thickness: 260 mm With T-slots in both directions Weight: approx 2 T 3 same plates available.

Condition: used, Year of construction: 1975, machine/vehicle number: 71879, Hyraulik press 51x Kunstoffplatten Plate formats: 600x600 Dksdpfxez Ibdno Ap Iou Platefilter features: Manual spindl dimension ca. 250x90x130 cm Distance between first plate and spindle approx ca. 90cm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale and available immediately: Used PICOT rolling machine Year: 2019 Type: RCS235-30 Dkjdpez D Suvefx Ap Ieu 3 motorized rollers Maximum length: 3100 mm Maximum rolling thickness: 8 mm Maximum nibbling thickness: 6 mm Roller diameter: 235 mm Digital roller position display

Year of construction: 1993, condition: used, functionality: fully functional, We offer this used ALMORE Mini calo cutting line for thermal insulation, built in 1993, with a double unwinding unit from Jouanel, in very good working condition. These machines are specialized in sheet metal processing and are particularly suitable for thermal insulation, industrial thermal insulation, and ventilation workshops. Functions include: length cutting, deburring, punching, and profiling. Djdoz Dtmaopfx Ap Ioku Machine weight: 2 tons. If you have any questions or need further information, please do not hesitate to send us a message or call us.

Year of construction: 2014, condition: good (used), Melag Melatherm 10 DT Thermo-disinfector The Melag MelaTherm 10 DT is a cleaning and disinfection unit (CDU) specifically designed for the automated processing of instruments in medical and dental practices. It integrates important functions such as active drying and media intake directly into the unit, saving space in the practice. Dimensions: The unit measures approximately 59.8 x 81.8 x 67.8 cm (W x H x D) and can therefore fit under a standard 60 cm worktop. Capacity: The optimized processing chamber offers space for instrument sets for up to 45 patients per batch. Active drying: Reliably protects instruments against corrosion and recontamination through integrated external and internal drying. Integrated process media: Cleaner, neutralizer, and rinse aid are housed in a space-saving drawer directly in the unit. Manufacturer: Melag Dkedpfeyk Eugox Ap Iou Type: Melatherm 10 DT Voltage: 230 V Year of manufacture: 2014 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm plate thickness 6 mm diameter of upper rolls 228 mm Dedezxt Txjpfx Ap Isku drive elektronisch zwei angetri

Condition: used, Year of construction: 1991, Used Machine Year of Manufacture: 1991 Dkjdpfezk Nx Ijx Ap Isu Features and Technical Specifications: - Fully automatic, floor-standing - Cutting area: 5,300 x 2,200 mm - Saw blade diameter: 300 mm - Control system for vertical and horizontal cuts - With aluminum folding stops and aluminum center support - With SUPER-CUT scoring device - Motor: 3 kW - 400 V Availability: available shortly Location: 63934 Röllbach