Used Thread Cutter for sale (4,942)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Dcedpfx Afsyu Nqmjfsf Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Dcedpfx Afsyxq Ucsfef

Condition: like new (used), Manufacturer: Kennametal Diameter: 500 mm Number of teeth: 62 Dcodpfx Afjyryd Ejfjf Available quantity: 2 pieces

Condition: good (used), Year of construction: 2011, Marelec Portio 1 Portion Cutter The fixed-weight portion cutter PORTIO 1 is used for portioning flat products such as chicken fillets, tenders, deboned thigh meat or salmon, with a vertical cut programmed to a fixed weight. This portioner for poultry is also used to cut to a programmed fixed thickness on more rounded poultry products. Key benefits Optimized yield Unparalleled accuracy Modular belt Upgradable to PORTIO 3 Adding options User-friendly software interface MATRIX P production reports Extremely hygienic, easy to clean Service Low noise Manufacturer:Marelec Model:Portio 1 Year:2011 Capacity:Max 17 cuts/sec. Cameras:1 Dodpfx Aoywgrusffscf Belt width:254 mm Max. product dimensions:940x240x150 mm Machine dimensions LxWxH:3.425x1.307x1.569 mm Machine weight:950 kg.

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head Dsdpfoyquwqex Affocf -Manufacturer: Ridgid, Thread cutting head model 5008 -Pipe size: 1/4 to 1" -built-in cutting jaws: 1" -Dimensions: 190/240/H75 mm -Weight: 3.4 kg

Condition: excellent (used), Year of construction: 1989, HYDRAULIC VENEER CUTTER Brand : TORWEGGE Model : 3200 Hydro Year : 80'S Machine brought up to standard (DEKRA inspection 03/2023), functional, offered as is, without overhaul. A video of our tests July 2024 MACHINING CAPACITIES : - Cutting length: 3200 mm - Max. cutting width: 60 cm - Passage height 100 mm - 50-70 kP/cm² pressure COMPOSITION : - Robust welded steel-mechanical frame - Ground cast-iron support table Front clearance 40cm Floor height (working height): 0.9-1m depending on installation Front lighting - Control panel mounted on articulated bracket - Rear table with 2 auxiliary extensions (PxL) 1x1.35m Electrically controlled pusher guide Working length 2.12m Distance between supports 30cm Manual precision adjustment Dimension indicator on ruler 2 flow recovery ejectors ELECTRICAL CHARACTERISTICS : - Power supply : 400v.Triphasé+N 50Hz - Installed power: 15 kW approx. (2 motors, hydraulic pump and pusher) Machine supplied with electrical diagrams 2 boxes with knives OPERATOR SAFETY : - Lockable disconnect switch - Mushroom-type stops - Two-hand safety control device - Frontal light curtain - Key lock for blade change - Safety contacts on removable housings - Ejectors at end of cycle to advance workpiece onto table Dimensions for transport (WxDxH): - Main frame: 4800 x 1300 x h.1750 mm. Estimated weight: 3000 Kg Dodsrx S Ucspfx Affocf - Rear guide, on pallet: 2.20 x 1.20 x h1.00mm Estimated weight: 300 kgs Functional machine offered without overhaul.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 45 h, machine/vehicle number: 202023-062, Multifunctional CAM cutting system in pure waterjet technology - without abrasives (waterjet cutting system / water cutting system). 2 cutting bridge with 2 cutting heads including Z-axis 1 head 2D cut 1 head 2D cut For cutting foam, plastic, technical textiles and other flat, flexible, non-metallic materials Dcsdjwrn Iyopfx Affjf Maximum feed-through height: 140 mm Cutting area in X and Y: 28500 mm * 2750 mm Protection class: IP54 incl. high-pressure pump BFT Ecotron 40.22 (Product photo as an example) The machine is CE-certified.

Condition: good (used), Ram Punch Gerhard Busch CL Label die cutter Professional machine made in Germany. Very good condition, ready to operate. Bush is a leader in the production of labeling machines and pushers. Dcjdpfx Afjyur Diefef 100% functional, with no signs of wear. Technical specifications: Max. format: 330x380mm Min. format: 130x180mm Cycles: 8/min Stroke length: 180mm Capacity: 400,000 sheets/h Installed power: 15kW Weight: 2600 kg The machine is equipped with a quick-action hydraulic unit. Safety guards, photocells activating automatic operation, and quick-adjustable die-cutting clamps with a crank. Angle adjustment of the entire head, piston stroke adjustment, and table adjustment. Feeder table adjustable in all planes. Two operating modes: automatic and manual. Tail on the delivery. Tool kit, conveyor belt for removing waste to the container. Made in Germany.

Condition: good (used), Technical Specifications: Motor: 1.5 kW Three-phase voltage: 220/380 V / 50 Hz Speed: 2800 rpm Max. mortising depth: 150 mm Max. slot length: approx. 170 mm Max. chain width: 40 mm Max. longitudinal table travel: 160 mm Max. transverse table travel: 90 mm Incline: 5 degrees Weight, machine: 72 kg Weight, stand: 35 kg Dcodswm Dlkepfx Affsf Approx. dimensions: (HxWxL): 190 x 54 x 60 cm

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Diameter of rolling spindles: 69.85mm Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm Dsdpfoxl Ebhjx Affocf

Year of construction: 2007, condition: used, For inquiries regarding this attachment, Mr. Herden (by phone) will be happy to assist you. SIMEX TF 800 Rock Cutter / Milling Head / Tunnel Cutter / incl. Liebherr SW48 Adapter Plate / Year of manufacture: 2007 / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross Drum width: 800 mm Milling speed: 75 - 115 rpm Hydraulic motor power: 61 (83) kW (HP) Required oil flow: 105 - 190 l/min Required oil pressure: 350 - 200 BAR Max. vertical force: 31.8 kN Operating weight (standard drum): 1,035 kg Recommended excavator weight: 14 - 22 tons Equipment: - incl. Liebherr SW48 adapter plate We have a large stock of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) available for immediate delivery. We carry a wide range of different attachments in our warehouse, all available for immediate delivery! Mr. Herden (phone) is happy to assist you. On request, we are happy to provide you with a financing quote as well. We are official sales and service partners of: - Westtech Dcodpjyxagnsfx Affof - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. Errors and prior sale reserved! Internal no.: 310390 = Further information = Curb weight: 1,035 kg For further details, please contact Marius Herden.

Condition: used, Year of construction: 2020, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). KEMROC EXR 60 HD surface planer / asphalt planer / milling attachment, incl. MS10 adapter plate / Year of manufacture: 2020 / in stock & immediately available Price: €24,890.00 net / €29,619.10 gross Dcjdpeyxaf Refx Affef Milling width: 600 mm Adjustable milling depth: 0 – 190 mm Recommended speed: 70 – 95 rpm Recommended oil flow at 100 bar: 150 – 200 l/min Min. oil flow: 150 l/min Max. oil flow: 210 l/min Max. hydraulic operating pressure: 380 bar Torque at 350 bar: 9,300 Nm Cutting force at 350 bar: 28 kN Operating weight: 1,400 kg Number of picks: 69 Recommended excavator weight: 15 – 23 t Rated power: 80 kW Equipment: - incl. MS10 adapter plate - incl. spare picks - incl. hydraulic hoses as shown in photos - incl. transport frame We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse holds a large selection of various attachments, all ready for immediate delivery! Mr. Herden (phone ...) will be pleased to assist you. On request, we are also happy to provide attractive financing options. We are an official sales and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni telehandlers - JCB construction equipment - Mercedes-Benz - Iveco With over 800 used commercial vehicles in stock, we are also one of Germany’s largest commercial vehicle dealers. Subject to errors and prior sale! Internal no.: 100439 = More information = Please contact Marius Herden for further information.

Condition: good (used), functionality: fully functional, tool type: SK 40, Cutter Holder SK40 Lorenz 4 pcs tool holders / cutter holders / shaping wheel holders for cutting wheels / shaping wheels / shaping knives in size SK 40 for Lorenz gear shaping machine, including the tool change device / tool holding device. In good used condition. 1 x Ø 31.75 x 120 for disc cutting wheel 1 x Ø 44.45 x 84.5 for disc cutting wheel / bell-type cutter Dedpsikvwqsfx Affscf 1 x Ø 44.45 x 84.5 for disc cutting wheel / bell-type cutter, special holder with centered mounting bore Ø9.9 for auxiliary tool 1 x Morse taper 2 for shank cutter wheel. Price / details on request. All technical data subject to typing errors / mistakes. We sell exclusively to countries of the European Community.

Condition: used, Bäuerle universal tool grinding machine for woodworking and metalworking tools. Dcsdpfsxytmuex Affef

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Dcedpfx Afeywpcpofof Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter

Condition: good (used), Used Laska KU200 bowl cutter is a high-performance machine designed for the food processing industry, offering a range of features that enhance its cutting and mixing capabilities. It is known for its high knife tip speed, which is among the highest in the industry, ensuring efficient and precise cutting​. For ease of operation and efficiency in the processing line, the Laska KU200 includes an unloader wheel, which facilitates the easy emptying of the entire bowl, significantly reducing downtime between batches Dodpfx Afert Uz Uofscf The machine has a 200-liter bowl capacity and is equipped with a knife shaft that can reach speeds of 0-4800 RPM. The motor installed power is reported as 103 kW. Total Dimensions: Laska KU200: L: 3300 x W: 2300 x H: 2000mm Electric cabinet: 1600 x 1200 x H: 600mm

Condition: new, Number of milling spindles 2 St. fence 1 ja workpiece ja Cross rung milling machine STEGHERR TYPE KSF-mini including standard stop with 2 sliding stops, without tools With the KSF-mini, all of those that occur in practice can be used Crossbar connections can be made quickly and precisely. The Precise execution is achieved by having the workpiece in one Clamping is machined on three sides. Dcodsyrtzqopfx Affef The tool is driven by two three-phase motors; the tension of the Workpieces pneumatically. The profile cutter is designed for the web width. The saw blades that... If you carry out flattening, spacer rings are used to match the dimensions of the Profile milling cutter adjustable. The swivel device is free of play. The machine is designed for a maximum workpiece cross section of 56 x 46mm. Voltage Europe: 400V(+/-10%)/3Ph/50Hz, USA: 440V(+/-10%)/3Ph/60Hz Other voltages on request. Operating instructions in German or English. Table base € 1.030.00 Foot switch € 870.00 Adjustment optics € 130.00 Profile milling cutter in HM-Wepla version, available for selection: Ø 5,7,9,11,13 mm. Price per piece € 630.00 1 set of replacement insert knives for profile milling cutters (=10 pieces) € 180.00 HM saw blade, price € 160.00 per piece (For a web of e.g. 10 mm, 3 saw blades are required) Setting the machine to the tools provided by the customer, price € 680.00 per individual tool Packaging in a crate (suitable for land transport) € 650.00 Packaging shrink-wrapped on a pallet (only within Europe, not for air freight) € 340.00 Pricing ex works, unpacked, uninsured, for delivery within Germany plus the VAT valid at the time of delivery. (all technical information according to the manufacturer, without guarantee!)

Condition: excellent (used), approx. 100 roughing cutters (28474) Diameter 8 - 37 mm HSS Dcodpfx Ajr Hbtyeffef 1 drawer contents

Condition: good (used), Height 2300 Width 2700 mm Length 2200 mm Weight 5000 kg Dcjdpfx Aern S Azjffef Voltage Electrical: 400V 50Hz 3N Installed Power 102 kw Main material Stainlees Steel Cutter Type Vacuum Bowl Cutter Bowl made of Stainless steel Bowl capacity 200 l Knives amount 6 pc. Knife shaft revolutions 680-5050 rpm Bowl revolutions 4-16 rpm

Condition: good (used), Equipment 2 knives Dsdpfjfbgayex Affscf

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) Dcedpfjl Dn N Sjx Affsf min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Optional equipment: second EM 130 bump turn

Condition: ready for operation (used), Feeding depth max 1.500 mm Feeding height max 155 mm Table height 870 mm Cutting width 1.500 mm Front table length 750 mm Equipment • program • air table • side table right Dcjdpfx Afsd Iapyjfef • side table left • light barrier • 2 knives

Year of construction: 2004, condition: good (used), Built in: 2004 Cutting width: max 2.600 mm Feeding height: 160 mm rear table length: 2.600 mm Front table length: 725 mm table height: 900-925 mm side table size: 750x570 mm machine depth: 4.180 mm Dcedpfxspfb Rtj Affef Machine width: 4.400 mm Machine height: 1.720 mm continuous knife cycle rate: 40 hydraulic pressure: 1,5-65 kN minimum cut without false clamp: 40 mm Speed: 17,8 kW Weight: 8.900 kg Equipment • chromed air table • side table right with air • side table left with air • digital program • program with color- display • 2 knives

Condition: ready for operation (used), Cutting width max 2.200 mm Feeding height max 140 mm Feeding depth max 1.750 mm Djdpfxjd Ewdue Affecf Front table length 750 mm Table height 890 mm Equipment • side table left • 2 knives

Condition: ready for operation (used), Cutting width max 1.550 mm Feeding height max 165 mm Feeding depth max 1.550 mm Front table length 750 mm Table height 890 mm Equipment • program with monitor Dodpfx Afjd Iaquofscf • air table • side table right with air • light barrier • optical cutting line indicator • retractable side gauge right • 2 knives additional units • jogger Baumann BSB 6 L, • unloading system Baumann BA6, standards • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment