Used Threaded Drill Chuck for sale (9,483)

Condition: used, Year of construction: 1990, ja vice 1 quill stroke ja 2.000 mm weight of the machine ca. 790 kg +++++ Kedjfym Huopfx Ab Sjll Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Tapping attachment Efem No.1 Kodpfotqlq Eex Ab Ssll for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Kjdpfow Ucm Usx Ab Soll Own weight: Engine hours: 5520 Model: 712HC-01

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Kljdpow Rag Defx Ab Sel Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery.

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21885 Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Kljdexy Eyaspfx Ab Ssl Description: The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg

Condition: new, The KB 20 SV is a state-of-the-art Column Drilling Machine in the KB SFV Series, designed for robust performance in any workshop setting. This high-quality drill press excels in light drilling tasks, featuring a modern design with a precision-ground work table and an infinity variable drive that is virtually maintenance-free. Equipped with a user-friendly touchscreen control panel, operators can easily switch between drilling and thread-cutting functions, which enhances productivity for both single part productions and manual series batch jobs. The machine includes a powerful, quiet motor and a reliable belt drive, ensuring superior rigidity and performance under high loads. Standard equipment such as an integrated LED work lamp, drill chuck, and tool-holder bits enhance usability. With a drilling capacity of 20 mm and sturdy construction, the KB 20 SV is an excellent choice for anyone looking to optimize their Column Drilling Machine operations. Order online today to experience the efficiency of KNUTH machines in your facility. Kodpfx Abju E Nduj Sjll

Condition: new, The KB 32 SF from KNUTH is a robust column drilling machine that is essential for any workshop or industrial application. Designed with a modern aesthetic, this machine features a heavy, precision-ground work table equipped with diagonal T-slots for optimal functionality. Its smooth height adjustment mechanism allows for ease of use, even when handling heavy loads. The KB 32 SF boasts a powerful motor, a reliable belt drive, and an integrated LED work lamp, ensuring superior performance and visibility during operations. With a drilling capacity of 32 mm and a spindle mount of 3 MT, this machine is built to meet the rigorous demands of various drilling tasks. Additional features include a forward and reverse function, automatic direction reversal for thread cutting, and a sturdy base plate with parallel T-slots. Included in the standard equipment are a coolant system, drill chuck, tool-holder bits, a drill press vise, and necessary operating tools. Elevate your drilling capabilities with the KB 32 SF, a key addition to your column drilling machines lineup. Request a quote today to enhance your efficiency and precision in drilling operations. Klsdpfxeuyiitj Ab Sel

Condition: used, Year of construction: 1999, ja Hydraulische klemmung Kedpow Syf Asfx Ab Soll weight of the machine ca. 3,3 t t

Condition: used, Year of construction: 1980, taper MK 4 serial number 520 Kledpfx Aew Sydlsb Ssl weight of the machine ca. 440 kg

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Kjdewhm Siepfx Ab Sell Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: used, RÖHM 3-Jaw Chuck, Used Type DURO-T315 - without jaws - Ksdpjwm D Rtefx Ab Ssll

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: smooth operation Spindle MK 3 Motor: 400 V, 0.55 kW Availability: approx. mid-April 2026 Klsdpjyaddfsfx Ab Sol Storage location: Hesse

Condition: excellent (used), Year of construction: 2000, overall weight: 150 kg, chuck outer diameter: 710 mm, 4-jaw chuck Kljdpfx Abjx Tr S Eo Ssl

Condition: excellent (used), CATALOG NUMBER 7567 TECHNICAL SPECIFICATIONS - Automatic strip feeding - 2 pneumatic clamps - Aggregate angle adjustment - Pneumatic spindle movement - Simultaneous machining of 2 sections - Groove depth up to 25mm - Support rails - Oscillating drill movement adjustment - Feed stroke adjustment - Automatic stop - Inclination from 90 degrees (vertical) to 0 degrees (horizontal) - Main motor 1.1kW - Oscillation motor 0.75kW Ksdpfsv H Db Hox Ab Ssll - Working pressure 6-8 bar - Dimensions (L/W/H) 4020x1150x1400mm - Weight approx. 480kg ADVANTAGES – For window production – Oscillation – Pneumatic clamps – Not painted – Italian made – Used machine, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on 4.2 EUR rate) (Prices may change with major fluctuations)

Condition: excellent (used), Catalogue number 7689 TECHNICAL SPECIFICATIONS - Tool diameter: 16mm - Maximum drilling depth: 160mm - Maximum milling length: 160mm - Adjustment of drilling unit: forward/backward, up/down and sideways - Working table dimensions: 600x320mm - Material clamping system - Motor power: 2.2kW - Dimensions (L/W/H): 950x740x1330mm - Weight: 283kg ADVANTAGES – Made in Poland – Very good condition – Used drilling machine Net price: 6300 PLN Klsdpfxeyarazo Ab Sjl Net price: 1500 EUR (depending on the exchange rate of 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Kjdpfx Aofbt Husb Soll Transport weight panel field approx. 14 ton. good condition

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Ksdpfx Abon N Ekce Sjll Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping Klsdpfx Aolhwr Reb Sol - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm Ksdpfx Ajqa Txqjb Sell spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drill table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition

Condition: used, Line boring machine WEBO with 4 stations type B 20 make no. 376/13; 376/14; 376/27; 376/36 year of construction approx. 1970 drilling capacity 20 mm spindle adaptor MK 2 - long spindle sleeve drilling head distance 335 mm throat 260 mm pinol stroke 190 mm table size 350 x 1500 mm distance drilling spindle/table min.30 mm / max. 700 mm Spindle speed drill head 376/13 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/14 355, 500, 710, 1000, 1400, 2000, 2800, 4000 rpm. Spindle speed drill head 376/27 250, 355, 500, 710, 1000, 1400, 2000, 2800 rpm. Klsdpfxeihmwte Ab Sol Spindle speed drill head 376/36 180, 250, 355, 500, 710, 1000, 1400, 2000 rpm. Motor power 1,1 / 1,3 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 4 V-belt steps - drill head height adjustment via toothed rack and hand crank approx. 300 mm - height adjustable drilling table approx. 350 mm space requirement L x W x H 1750 x 1100 x 1900 mm weight 1900 kg good condition

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm Klsdsib D H Rspfx Ab Sol - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg In good condition

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Kljdpfohik Ezex Ab Sol Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Throat: 290 mm Quill stroke: 160 mm Kodpoharwvefx Ab Soll Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, Vertical milling head, milling head with motor drive THIEL Tool holder: MK 5 (Morse taper size 5) Quill stroke, spindle travel: 80 mm Spindle speed at motor speed 1410 rpm = 490 / 780 / 1200 rpm. Kledpfx Aboxddwrj Sel Spindle speed at motor speed 2950 rpm = 970 / 1530 / 2380 rpm. Spindle bore: 37 mm Motor power: 1.4 / 1.8 kW Motor speed: 1410 / 2850 rpm Power connection: 400 Volt, 50 Hz - Spindle speed via 2 motor speeds and 3 belt stages - Mounting flange milling head Ø 215 mm with 2 bores Ø 15 mm, hole spacing 180 mm - suitable for tools with drawbar thread (ejector tang interferes with clamping) Required space L x W x H: 450 x 400 x 350 mm Net weight: 61 kg Good condition

Condition: excellent (used), Deep hole drilling machine tools Ksdex Tp Ahspfx Ab Soll DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Year: 2005