Used Three Knife Machine for sale (67,900)

Condition: excellent (used), Year of construction: 2020, Ref: 11147 . 2020 Horizon HT-80 Three-Knife Trimmer Fully automatic three-knife trimmer designed for short-to-medium-run and digital/book-of-one production. Can work offline or inline with Horizon binders up to 1,000 cycles/hour, 51 mm book thickness, automatic setup and book-of-one capability Features: Automatic size setup via colour touchscreen: input the untrimmed and finished book dimensions and the machine automatically positions the relevant sections. Servo-controlled jogging and clamping provide accurate registration, while the swing-knife cutting action is designed to give a clean three-side trim. Also capable of book-of-one production. Books of the same finished size but different thicknesses can be processed consecutively It can run inline with Horizon BQ-470, SB-07 and SB-09S systems, as well as offline. Specification: Untrimmed book size – Max. 330 × 330 mm Untrimmed book size – Min. 145 × 105 mm Finished book size – Max. 300 × 300 mm Finished book size – Min. 139 × 99 mm Book / trim thickness: 1–51 mm Maximum head & foot trim: 30 mm each Maximum fore-edge trim: 30 mm Bodpfx Asz Akmkjknewu Production speed: 400–1,000 cycles/hour Clamping pressure: 4–8 kN, up to 10 kN depending on conditions Clamp drive: Servo motor Standard formats: A4, A5, 8.5 × 11", 5.5 × 8.5" Job memory: 200 jobs Dimensions: 1,610 × 2,610 × 1,515 mm W × D × H Power: 3-phase, 200–230 V, 50/60 Hz; 380/400/415 V versions via transformer

Condition: good (used), Conveyor belt for waste removal guillotine, three-knife, automatic die-cutter Production Germany Bwjdpfx Asztn N Reknou Working width 52 cm, conveyor belt length approx. 300 cm. Discharge of scrap from under the machine directly to the container.

Condition: excellent (used), Year of construction: 2016, Ref: 11131 . 2016 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 196,000 books cut! Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Can run at speeds up to 1,600 cycles per hour. Bodpjzq D Iqofx Aknewu Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm * Top-Bottom: 30 mm Trim Height (book thickness/spine thickness) * 2 mm to 100 mm Production Speed 400 to 1,600 cycles/hour

Condition: used, Year of construction: 2011, Three knife trimmer Kolbus HD 143.P Year: 2011 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Counter: 12.560.000 books Bwsdpfx Akoz Eaq Ionju Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: 7.500 single products/hour or 4,200 single products/hour from 40 mm product thickness on Maximum size (cutted): 305 x 420 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum size (uncutted): 320 x 450 x 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: good (used), Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, coolant pump power: 150 W, grinding spindle motor power: 1,500 W, overall weight: 510 kg, grinding wheel diameter: 230 mm, For sale: Wadkin copy sanding machine in tidy condition with a wide working capacity. Bwjdpfx Aksyk S U Tonou

Condition: good (used), Year of construction: 1978, Knife grinding machine with 1300 mm grinding length, equipped with a swiveling magnetic rail. The machine is labeled Vollmer but was built by Reform. Function tested. Bedpfx Akjynt I Nsnewu

Condition: used, Year of construction: 2004, Format: 310 x 430 mm Equipment: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Total number of knife sets: 1 Bwsdey Tacxopfx Aknou Interchangeable Cutting Cassettes (Standard Set)

Condition: used, Year of construction: 2000, grinding length: 240 mm, feed length X-axis: 50 mm, feed length Y-axis: 50 mm, feed length Z-axis: 240 mm, grinding width: 300 mm, WEINIG RONDAMAT 970 – Profile and Tool Grinding Machine – Year of Manufacture 2000 For sale is a WEINIG Rondamat 970, year of manufacture 2000, a high-quality automatic profile and tool grinding machine from Michael Weinig AG. The machine is suitable for manufacturing and re-sharpening profile and planing knives, as well as for grinding tools and knife heads. Profile tools can be manufactured manually using a template and then automatically re-sharpened. The machine is also suitable for re-sharpening planing knives in the knife head. Technical Data * Manufacturer: Michael Weinig AG * Type: Rondamat R 970 * Year of Manufacture: 2000 * Machine No.: 91176 * Tool Diameter: 100–300 mm * Max. Tool Width: 240 mm * Grinding Wheel Diameter: 150–225 mm Bwedpfsz Evaljx Aknju * Grinding Wheel Bore: 60 mm * Grinding Wheel Width: 2 / 3 / 4 / 10 mm * Grinding Spindle Speed: 1,500–3,000 RPM * Grinding Spindle Drive: 1.1 kW * Total Connected Load: approx. 2 kW * Coolant Tank: approx. 50 liters * Operating Voltage: 380 V / 50 Hz * Back Angle: 10–30° * Lateral Clearance Angle (manual): 0–20° * Lateral Clearance Angle (automatic): 2.5 / 5 / 7.5 / 10° * Relief Angle for Planing Knives: 60° * Automatic Indexing: up to 16 knives * Precision: Grinding tolerance under 0.005 mm. Suitable for: * Profile knives * Planing knives

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, travel distance X-axis: 6,000 mm, workpiece weight (max.): 1,000 kg, laser power: 20,000 W, pipe diameter (max.): 6,000 mm, Equipment: cooling unit, safety light barrier, Max. Length of Tube: 6m Cutting Capacity of Round Tube: Φ360mm Cutting Capacity of Square Tube: Φ360mm Max. Load: 1000kg Bwedpfx Aov D T H Toknsu Zero Waste Cutting Full stroke movement, capable of cutting both ends of the pipe, improving material utilization Full Pipe Cutting available Standard auxiliary loading and unloading system loading, unloading, and cutting of 6m full pipes available Bevel Cutting Function available Bevel angle adjustable from 0-45° Capable of V, X, Y, K type bevel cutting Optional Automatic Loading and Unloading Saves labor costs, and increases production efficiency Intelligent production for high efficiency

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Bwsdjwmw Daspfx Aknsu

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Model: 925 Rondomat Year: 1992 Serial number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Relief angle for back relief: 15 - 45 degrees Axial: 0 - 10 degrees Cooling liquid Bwoden Ut Sljpfx Aknsu

Condition: good (used), Year of construction: 1980, Grinding machine with an adjustable clamping bar, up to a maximum of 1200 mm. Maximum workpiece thickness: 30 mm. Bwedpfx Aezczlrjknju

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, WEINIG Rondamat 1000 CNC – High-precision knife grinding machine For sale is a used WEINIG Rondamat 1000 CNC, manufactured in 2016. The Rondamat 1000 CNC is a high-precision CNC knife grinding machine for fully automatic sharpening and manufacturing of profile knives, as well as for re-sharpening of straight planer knives and profile knives in the knife head. Technical data and equipment: * Manufacturer: WEINIG * Model: Rondamat 1000 CNC * Year of manufacture: 2016 * High-precision knife grinding machine * Automatic import of CNC programs from Moulder Master * Fully automatic sharpening and manufacturing of profile knives from a blank * Fully automatic re-sharpening of straight planer knives and profile knives in the knife head * Grinding of planer knives in the planer head with standard knife overhang possible Grinding unit: * Solid spindle carrier with precise guides * Roundness accuracy less than 0.005 mm * Motorized radial adjustment for different grinding wheel diameters * Back clearance angle fully automatically adjustable * Lateral clearance angle fully automatically adjustable * Grinding spindle with HSK mounting * HSK 50F * Grinding wheel diameter: 150–200 mm * Grinding wheel width (Borazon/Diamond): 2 / 3 / 4 / 10 mm * Grinding wheel bore: 60 mm * Grinding spindle drive: 1.5 kW (2 HP) * Grinding spindle speed: 1,500–3,000 rpm, frequency-controlled * Radial clearance angle grinding: 10–30° * Lateral clearance angle: 0–20° Automatic equipment: * Automatic grinding wheel measurement using a mechanical measuring process * Automatic compensation for grinding wheel wear Bedpfx Akez Eypdenjwu * Automatic tool changer * Grinding wheel magazine with 3 magazine slots * Coolant system * Automatic coolant cleaning via a transport filter system * Coolant tank approx. 70 liters * Coolant additive: 5 liters * Coolant pump: 210 W * LED light for the machine interior Tool holder: * System "PowerLock 360" * Suitable for grinding PowerLock tools and large-sized boring tools * Max. tool weight: 80 kg * Tool holder with manual HSK quick-change system * Interchangeable receiving spindle for right and left tools * Max. tool width: 360 mm * Max. tool circle diameter: 300 mm * Min. tool circle diameter: 90 mm * PowerLock adapter for conventional tools, shank diameter 50 mm * Additional dividing head * Additional PowerLock adapter for conventional tools 40 mm or 50 mm Electrical data: * Operating voltage: 400 V * Voltage range: 380–420 V * Frequency: 50 Hz * Total connected power: approx. 3 kW (4 HP) Operation and control: * Operation from the front * Graphical user interface * Connection to WEINIG Moulder Master * Management of grinding wheels * Management of CNC programs * Setting of machining parameters such as feed speed, depth of cut, and feed cycles * Setting of tool parameters such as number of cutting edges, tool diameter, and blank material * Display of the current machining progress * CNC program generation in conjunction with Moulder Master

Condition: used, machine/vehicle number: 48966, Dreischneider / Three Knife Trimmer Perfecta SDYEZ-0 Serial-No. 48966 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Bsdpfx Akstzc Iwonewu Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2015, Three knife trimmer Kolbus HD 143.P Bwedpfozx S Risx Aknou Year: 2015 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Cycles: 12,9 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: up to 4.200 cuts/h Maximum size (uncutted): 450 x 320 x 80 mm Maximum size (cutted): 420 x 305 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum pile height: 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Technical data: - Maximum grinding wheel diameter: 225 mm Bedpfxjzrx Hqj Aknewu - Maximum tool diameter: 300 mm - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding length: 1,500 mm, grinding spindle motor power: 7 W, grinding wheel diameter: 200 mm, GOCKEL G50 el straight knife sharpening machine Machine has been overhauled and is in perfect working order. Mechanical feed. Bjdpfx Asz D H Rljknswu Variable feed rate. 7.5 kW spindle.

Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. Bfywfrix The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. Bsdpsh Aw Rnsfx Aknjwu The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil. As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc. We have a ready-made solution for your business for hangars roofing buildings production. For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover For closing the standing seam lock our customers can use special standing seam roofing tools While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Condition: used, functionality: unexamined, grinding length: 330 mm, You buy what you see. Stopped working machine a few years ago. Needs cleaning and maintenance Bwsdpfxezk Ewao Akneu

Condition: used, Year of construction: 2009, Three knife trimmer Müller Martini Orbit (3675) Year: 2009 For three side trimming of book blocks and brochures, operable in connection with soft- and hardcover book production lines. Description: - Colour monitor with touchscreen - Infeed conveyor - Right hand infeed - Automatic hopper feeder for inline production - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 Maximum size (uncutted): 384 x 320 mm Minimum size (uncutted): 140 x 72 mm Maximum size (cutted): 304 x 303 mm Minimum size (cutted): 136 x 70 mm Book thickness: 2 - 80 mm Max. mechanical speed: 1.000 to 7.000 cycles/hr Bwjdpewuthwsfx Aknju Condition: This machine is offered fully cleaned and checked in good running condition Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: excellent (used), machine/vehicle number: 011001, Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Bsdpfxoz D U Hne Aknowu Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp System and Pressure: Servo Motor 2 kN to 8kN Production Speed: 400 to 1,000 cycles per hour

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: I15CIP1350GL, grinding length: 1,350 mm, total width: 700 mm, total length: 2,200 mm, total height: 1,400 mm, grinding width: 90 mm, type of input current: three-phase, input voltage: 400 V, grinding height: 30 mm, grinding spindle motor power: 2,200 W, overall weight: 455 kg, grinding wheel diameter: 150 mm, input frequency: 50 Hz, input current: 3 A, operating speed: 22 mm/s, Equipment: rotational speed infinitely variable, The electronically controlled version of the grinding wheel depth uses a PLC + HMI screen, allowing for precise control of the sharpening process. Bwodpozytw Hefx Aknou Sharpening machine motor power: 2.2 kW Grinding wheel diameter: Ø150 mm Grinding wheel peripheral speed, continuously adjustable via the CNC panel: 5 to 22 m/s Grinding wheel depth adjustment, settable via the CNC panel: 0.001–0.05 mm Maximum distance between the magnetic table and the grinding wheel: 30 mm Width of the clamp/magnetic table: 90 mm Feed motor: 0.18 kW Carriage feed speed, electronically adjustable via the CNC panel: 0.5–15 m/min Coolant pump: 0.18 kW Oil pump for lubricating the guides (operating frequency selectable via the CNC panel): 0.18 kW Coolant pump flow rate: 30 l/min Voltage: 400 V Frequency: 50 Hz Weight: 455 kg Maximum sharpening length: 1350 mm Machine width (approx.): 700 mm Machine height (approx.): 1400 mm Machine length (approx.): 2200 mm The grinder is connected to a coolant tank and is equipped with a magnetic screw system for collecting metal chips.

Condition: used, Year of construction: 2021, functionality: fully functional, operating hours: 2,460 h, number of axes: 4, number of slots in tool magazine: 6, actuation type: electric, table length: 15,000 mm, table width: 1,000 mm, Equipment: CE marking, For sale: CNC milling plotter Sentinel E 1015, purchased for wood milling applications. In practice, the machine was used exclusively as a cutting machine for corrugated cardboard. It was not used for heavy-duty wood or metal processing, and its components were not subjected to loads associated with such milling. Technical and visual condition: excellent. Bsdpsz Drmxefx Aknjwu Condition and usage history as declared by the seller. P A R A M E T E R S / S E T C O N T E N T S Specifications and equipment ATC spindle, linear tool changer, and vacuum table with rotary vane pump. Working area X: 1000 mm / Y: 1500 mm / Z: 300 mm Kinematics: Linear guide Linear transmission: Structural rocker system ATC spindle: Power 8–9.6 kW; automatic tool change Spindle parameters: 24,000 rpm; ceramic bearings; ER 32; ISO 30 Tool changer: Linear, for 6 tools Drives: Digital AC servo drives: 4 × 400 W Vacuum table: HPL plate Machining technology: HSM (High Speed Machining) Measuring systems: Material height sensor; tool length sensor Tool cooling: Compressed air Material clamping: 3-pin clamping system Control: Control cabinet with computer, keyboard, and mouse Tools and accessories included Tool holders: Complete set of 6 ISO 30 tool holders ER 32 collets: Ø 3, 4, 6, 10, 12, and 16 mm Table accessories: Vacuum table seals: 30 m; 2 vacuum table supports Rotary vane vacuum pump included Model: C-VRL 301 Zephyr¹ Motor power: 5.5 kW Nominal capacity: 290 m³/h Final pressure: 150 hPa (mbar) ¹ Designating the pump according to the provided specifications; to be confirmed on the nameplate. M A T E R I A L S / M A C H I N E D E T A I L S Range of applications Machining capabilities depend on the tool used, material thickness, operating parameters, and machine configuration. Wood and wood-based boards: Wood, plywood, OSB, MDF, HDF. Metals: Aluminum, brass, bronze, and other metals, depending on the selected machining technology. Composites and technical boards: Composites, conglomerate, Corian, HPL, Dibond. Plastics and modeling materials: Prolab, polyurethane foam, polystyrene, expanded PVC, Plexi, polycarbonate, acrylic. Materials for cutting with an oscillating head² Technical polyurethane foam, sponge, cardboard, corrugated board, film, leather, fabric, rubber, plastics; Kryngielit, Gambit, Polonit, and other materials and boards.

Year of construction: 2007, condition: ready for operation (used), Bsdpfx Akoyt E D Tsnjwu

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Bjdpfxexxb Rrs Aknowu Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.