Used Tomcat Cleaning for sale (6,621)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, It is an semi-automatic machine fitted for small parts cleaning by Ultrasonic. Hedpezvh E Rjfx Ak Uenu

Condition: used, operating hours: 3,163 h, fuel type: diesel, fuel: diesel, HAKO Automatic Cleaner and Vacuum Cleaner Name: HAKO JONAS 1450 D Power: Diesel Condition: OK, see photos Used features (please call for any defects) Hedpfx Akswffaaj Usnu Battery is fully charged Large collection basket with discharge container / hydraulic Brush replaced Item No.: 1450 D Manufacturer: HAKO Year of manufacture: see photo - looks good Operating hour meter reads "3163" 2 brushes Fuel: Diesel Price quoted upon pickup from warehouse 47441 Moers Various cleaning and scrubbing machines in stock We offer as shown. Inspection is expressly offered. General: We offer various items here, which we describe as best as possible and provide informative photos. No further information about the item can be provided. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. We offer viewings on Tuesdays and Thursdays between 9 a.m. and 4 p.m. by appointment. The item can be picked up immediately if necessary. Due to time constraints, we can only offer answers to this question if you provide us with a telephone number with your inquiry. Unless expressly stated, this item is USED. We offer it as shown. All items are ex warehouse, 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €650 net, depending on distance.) All dimensions are approximate.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, heating capacity: 3 kW (4.08 HP), overall weight: 300 kg, input voltage: 380 V, year of last overhaul: 2026, Two-stage machine: the first stage uses ultrasonic cleaning, and the second stage is for rinsing without using the ultrasonic function. Hnodpfx Aozt Riaok Ueu

Condition: new, Year of construction: 2025, HW 3 in 1 Welding cleaning Cutting with 2kw Max laser power is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. Hnodjk Radijpfx Ak Uou we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Working efficiency - 2000 m2/h Brush motor - 550W Clean water tank - 60 l Hedpfxjz D Adns Ak Ujnu Machine weight - 180 kg Battery capacity - 24V/100Ah Cleaning width - 850 mm Vacuum motor - 500W Sewage tank - 55 l Machine dimensions - 140 x 85 x 105 cm

Condition: reconditioned (used), Year of construction: 2001, Riehle cleaning machine. Hnedpsz Ia Ixjfx Ak Uju Year of manufacture: 2001 Power: 17 kW Used and refurbished. Price on request.

Condition: used, Stratasys Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 Hnsdpfx Akszixy Sj Usu + Transformer – Complete System Description: The Stratasys Fortus 450mc is an industrial, high-end 3D printer from the FDM series (Fused Deposition Modeling). It is used worldwide in prototype manufacturing, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: Stratasys Fortus 450mc (3D Production System) Krumm Tec CLEAN MATIC 3150 cleaning system for support material Badger Magnetics 8 kVA transformer (suitable for EU power grids) The system comes from a professional application and was used for the production of high-quality functional parts and prototypes. Key features of the Fortus 450mc: Industrial FDM 3D printer with a large build volume: 406 × 355 × 406 mm Prints high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* Very high dimensional accuracy and repeatability Network-enabled, touchscreen, easy operation Ideal for prototyping, production of small series, tooling, jigs and fixtures (*depending on material licenses) Technical data Fortus 450mc Voltage: 120/208 V, 3-phase (transformer for EU operation included) Current consumption: 18 A Dimensions approx.: 127 × 91 × 196 cm Software version according to display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150 Model: CM 3150 US/PS 4 kW, 400 V, 50 Hz, 16 A Ideal for removing SR-30 / SUP706 support material Weight: 140 kg Weight approx.: 600–700 kg Important note: “The table shown in the photos is not part of the sale.” Scope of delivery Stratasys Fortus 450mc Krumm Tec CLEAN MATIC 3150 cleaning system Badger Magnetics 8 kVA transformer (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2011, condition: good (used), functionality: fully functional, Clean-o-mat SP 120 Usable basket diameter approx.: 1140 mm Usable height approx.: 500 mm Hnedpfx Ajyth Uzjk Uju Loading height approx.: 830 mm Permissible basket load: 500 kg Fluid volume: 210 l Pump delivery rate: 280 l/min Connection data: 230/400 V / 24 A / 50 Hz Pump motor power: 4 kW Heating capacity: 9 kW Rotary basket drive: 0.09 kW 1-stage steam extraction: 0.45 kW Overall height approx.: 1250 mm

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Hnodex E Rd Depfx Ak Ueu Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Year of construction: 2014, condition: used, functionality: fully functional, For sale is a 2-bay cleaning system for KLT small load carriers. The Röhnrad cleaning process ensures that the KLTs are repeatedly filled and emptied with the cleaning medium, which guarantees excellent cleaning and drying results. In addition, the cleaning system features a recirculating air drying system with 18 kW. The insertion shelves can be adjusted in height to accommodate different KLT sizes. Equipment: - Automatic level control for the cleaning and rinsing tanks - Dosing pump Hnjdpfx Akjz Aizgj Uou - Steam extraction system - Recirculating air drying system 18 kW - Cleaning access cover - Three-phase separator oil separator - Fine filter Eaton for cleaning and rinsing tanks - Visual system status indicator (traffic light) - Feed trolley - Washing basket and adjustable grid - Insertion shelf Further details can be found in the attached data sheet.

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet Hnedpfx Akoz Ahcco Usu • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW • Power Supply: 400 V, 3-PhaseAdditional photos are available upon request.

Year of construction: 2023, condition: excellent (used), functionality: fully functional, number of tool turrets: 1, Note: This offer concerns the assignment of the leasing agreement. Narran ROD 500W pulsed laser cleaning system, IPG Photonics source. The unit is in very good condition. Technical specifications: - Average power - 500 W, - Peak power - 2.5 MW, - Wavelength - 1064-1070 nm, Hnodpfx Akex Ezw Uo Usu - Frequency - 2-50 kHz, - Fiber optic cable length - 10 m, - Head weight - 1.5 kg, - Dimensions - 1.4 x 0.6 x 1.1 m, - Unit weight - 195 kg, - Rated power - 3.5 kW, - Power supply - 220/230 V (16A). In addition, the following will be included with the unit: - TBH LN 265 filter – high-efficiency dust extraction system in a compact and mobile design; - Exhaust fan with extraction hose and nozzles; - Special safety glasses for laser operation – 6 pcs; - Interchangeable lenses for the working head; - 3M mask/face shield; - Protective screens to demarcate the work area; - PL and EN manuals, PL operating instructions, and workstation instructions; - Domain name, website, and email address. The leasing is managed by mLeasing Sp. z o.o. (mBank group). When submitting an inquiry, please provide the following: - EU VAT number, - Full company name, - Company address, - Name of the person representing the company, their email address, and direct phone number. Based on this information, we will submit a request for the assignment, and mLeasing will contact the interested party directly. The stated price is the sum of the net principal payments, excluding any additional costs, and is for informational purposes only. The offer does not include an assignment fee.

Condition: used, Stratasys Objet   Model: Objet260 Connex 2   Stratasys Objet260 Connex 2 3D printer + cleaning glovebox Computer, monitor, software: Objet Studio Ver. 9.2.11.6825   The Objet260 Connex 3D printers from Stratasys are based on PolyJet technology and enable the combination of two or three base resins in a single printing process, thus allowing the production of prototypes made of three materials, as well as simulating overmolding or equipping build plates with selected models.   Using triple-jetting technology, the Objet260 Connex creates prototypes with up to 27 material properties simultaneously in a single part. The device enables high-resolution 16-micron layers for printing complex geometries, smooth surfaces and thin walls.   Model materials:   Rigid and opaque (VeroWhitePlus, VeroBlackPlus, VeroGray and VeroBlue) Rubber (Tango family) Transparent (RGD720 and VeroClear) Simulated polypropylene (Endur and Durus) Biocompatible (MED610) Heat-resistant (RGD525)   Digital Materials:   Digital ABS and Digital ABS2 Wide range of light transmission values Rubber mixtures with a range of Shore A hardnesses Simulated polypropylene materials with improved heat resistance   Applications: Visual prototypes Functional prototypes Tools and fixtures Architectural models Medical models Injection molding molds Concept models   Technical specifications:   Build volume: 255 × 252 × 200 mm   Layer thickness: Horizontal layers of only 16 µm   Resolution: X-axis: 600 dpi; Y-axis: 600 dpi; Z-axis: 1600 dpi   Accuracy: 20 to 85 µm for parts smaller than 50 mm; up to 200 µm for the complete model size (only for rigid materials, depending on geometry, design parameters and model orientation)   Size and weight: 870 × 735 × 1200 mm; 410 kg   Hodpfxszh Dqys Ak Uonu AC power connection 100–120 VAC, 50–60 Hz, 13.5 A, single-phase Or 200–240 VAC, 50–60 Hz, 7 A, single-phase   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Special equipment: automatic oil skimmer Technical data Heatable for aqueous cleaning agents. For the removal of oil and grease contamination in the shortest possible time. Universally applicable for the fully automatic cleaning of small parts from production, manufacturing, and maintenance, such as bolts, sleeves, and ball bearings. 2129905 Easy operation thanks to the fully automatic cleaning process. This allows skilled workers to concentrate on other important tasks. The washing tank is filled with a mixture of water and a water-soluble IBS special cleaner (washing solution). The contaminated parts to be cleaned are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the device is switched on, and the solution in the tank is heated. In the closed device, the basket rotates around its own axis at a constant speed. The pump unit draws the washing solution from the washing tank and pumps it through 3 stainless steel nozzle tubes with overlapping flat jet nozzles. The parts to be cleaned are intensively blasted with the hot solution from all sides during the uniform rotation of the motor-driven basket. After the cleaning process is completed, the device switches off automatically. ∙∙ 1 pump arranged vertically ∙∙ 3 three-dimensional nozzle tubes made of stainless steel ∙∙ robust stainless steel design ∙∙ additional small parts cleaning basket made of stainless steel (Ø 170 mm) ∙∙ rotating washing basket made of stainless steel, gear rim drive via separate motor ∙∙ intake filter in front of the pump shaft ∙∙ high spray pressure ∙∙ fume extraction ∙∙ stainless steel sieve plate with filter basket ∙∙ low water level protection W x D x H (closed): 1130 x 1010 x 1150 mm Hnsdpfx Aszwb Eask Ueu W x D x H (open): 1130 x 1220 x 1730 mm Usable height: 500 mm Load capacity: 150 kg Basket diameter: 780 mm Washing tank capacity: 85 liters Pump pressure: 3.1 bar Spray rate: 4800 L/h Power consumption: 4.8 kW / 400 V / 50 Hz Weight: 90 kg Temperature: 0-60°C

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Industrial self-cleaning disc filtration system manufactured by CHEMIPOL. The unit was installed as part of a reverse osmosis water treatment plant and was used for water pre-filtration. The system is equipped with eight TW-type disc filter units operating in parallel. Automatic cleaning is controlled by a Siemens PLC with an HMI operator panel. TECHNICAL DATA Manufacturer: CHEMIPOL Model: TW8P2L3 Equipment type: Self-cleaning disc filtration system Number of filter units: 8 Filter type: TW disc filters Configuration: Parallel operation Cleaning system: Automatic self-cleaning Hnjdpjzvlm Eefx Ak Usu Pressure monitoring: Two pressure sensors measuring inlet and outlet pressure Control system: Siemens PLC Operator interface: HMI touchscreen Application: Water treatment and reverse osmosis pre-filtration

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Hnsdpjw Ewl Ujfx Ak Uou Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: excellent (used), functionality: fully functional, RIDGID SeeSnake C40 camera system with TruSense Versa monitor used, from business liquidation The SeeSnake Compact C40 offers digital recording of inspections with Wi-Fi for quick and efficient organization and completion. Thanks to the tilting function, you can view the monitor at any desired angle or detach it for convenient placement at the work site. TruSense technology features an HDR (High Dynamic Range) image sensor and two-way communication between the camera and Wi-Fi-enabled monitors in the SeeSnake CSx series. Technical data according to the manufacturer: Pipe capacity 38 mm to 152 mm Push cable length 40 m Push cable diameter 0.26" (6.7 mm) with 0.12" (3 mm) fiber optic core Push cable jacket polypropylene Push cable minimum bending radius: 63.5 mm Weight (without battery): 8.0 kg Dimensions length: 63.5 cm Width 35.6 cm Height 43.2 cm Camera head: 1" (25 mm) Operating temperature -10°C to 50 °C Storage temperature -10 °C to 70 °C Ingress protection without monitor IPx5 Lighting: High-intensity LED sensor 512 Hz Hodpfx Asz Iba Aok Uenu We recommend an inspection. Sale expressly excludes any warranty for defects. No guarantee or warranty. Information without guarantee. Information, details and technical data from the manufacturer. To avoid any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. to 4:30 p.m. During this time, inspections and collections are possible and welcome, but only by prior appointment. Subject to prior sale, changes, errors and omissions.

Condition: used, DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0, Year of manufacture: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time required for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts contained within. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Hsdozgr T Tjpfx Ak Ujnu Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space required in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4 m³/min at 2.2 bar Maximum: 1.8 m³/min at 5 bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions for you by telephone.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Urban SV 530 with a turning station, configured to process from right to left, in very good condition, complete with internal and external tools for finishing PVC profiles. Upon request, we can install the machine and program it for your specific profile. Hnodpfx Ajz D Ildok Uju

Condition: used, Year of construction: 2010, 4-head welding machine Hnjdpfx Akozv S Euj Usu Automatic corner cleaning machine

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 200 W, machine/vehicle number: ELXX-25100004, For sale is a professional, pulsed laser cleaning machine (pulse laser) of the type GL-PM-200 from the manufacturer EraserLaser GmbH. The unit dates back to the 2025 model year, has very few operating hours, and is in excellent, fully functional condition. In contrast to continuous CW lasers, this pulsed system is ideally suited for extremely precise and material-friendly cleaning. It is the ideal solution for demanding tasks where the base material (e.g., sensitive molds, historical components, weld seam preparation, or precision tools) must not be subjected to any thermal influence or material removal. Rust, paint, oils, and oxide layers are removed precisely and without leaving any residue. Hjdjziww Aopfx Ak Ujnu Product benefits & highlights: Maximum precision without heat input: Thanks to the fine adjustment of pulse width (20–500 ns) and frequency, the cleaning can be precisely tailored to sensitive surfaces. Compact & flexible: The laser is housed in a robust enclosure and can be ideally used in mobile applications. Extensive parameter control: Parameters such as laser power, scan speed, frequency, and track density (Spiral Series) can be precisely controlled via the intuitive 7-inch touch display. Quick access to memory locations: Up to 5 user-defined work modes can be saved to allow quick switching between different cleaning requirements in everyday work. Easy maintenance & care: Low maintenance thanks to reliable air cooling. Integrated preview laser for precise alignment of the cleaning area on the workpiece. Technical data at a glance: Model: GL-P-M-200 Laser type: Pulsed fiber laser (pulse laser), Laser Class 4 Wavelength: 1064 nm Laser power: 200 watts (continuously adjustable from 10% to 100%) Laser frequency: 5 kHz – 4000 kHz Pulse width: 20 ns – 500 ns Cleaning area (length x width): Variable, adjustable up to 100 mm x 20 mm Fiber length (hose assembly): 4 to 10 meters Cooling: Air-cooled Power connection: 220V AC (Schuko plug, fuse rating min. 16A) Condition & scope of delivery: Condition: Very well-maintained, used condition, hardly used, visually and technically flawless. The protective lens and optics are clean and fully functional. Scope of delivery: Laser cleaning system GL-P-M-200 including hose assembly and cleaning gun. Important safety note: Operating a system of Laser Class 4 requires the mandatory use of approved laser safety goggles (DIN EN 207 for the wavelength range of 1064 nm) as well as compliance with applicable occupational safety regulations (including respiratory protection/extraction).

Year of construction: 2026, operating hours: 20 h, condition: new, functionality: fully functional, operating temperature: 60 °C, air pressure: 2.5 bar, conveyor belt width: 400 mm, heating capacity: 18 kW (24.47 HP), product height (max.): 200 mm, product length (max.): 800 mm, product width (max.): 400 mm, machine/vehicle number: 45664, Beltline / Conveyour Cleaning System 400 WRD is developed as a compact and efficient solution for parts washing directly in the production line. The Beltline Series is specifically designed for industrial parts washing and degreasing of components with a certain level of complexity or weight, or in applications where gentle handling is required. The energy-efficient design reduces both operating costs and manual handling, making the solution ideal for both small batch production and continuous operation. Hjdpfxozy Eqxe Ak Ujnu Standard equipment: Siemens PLC Grundfos pump Fully insulated construction Automatic level and pressure monitoring You can find technical details in the PDF attached document.

Year of construction: 2009, condition: good (used), Bous Waschfix WSA 70 T3 cleaning and degreasing system BOUS cleaning & degreasing system Waschfix WSA 70 T3 Usable space: 700 mm Filling capacity: 180 l / 180 l Temperature °C Heating: 12 / 6 kW Extraction: 0.25 kW Drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total power consumption: 54 A 400 V Year of manufacture: 2009 Hsdpopq N I Dsfx Ak Ujnu Special equipment: Fine filter Drainage pump Filter monitoring You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2025, condition: used, functionality: fully functional, laser power: 1,500 W, machine/vehicle number: ELKY-2504021, For sale is a professional, continuous laser cleaning machine (Continuous Wave) of the type GL-C-CWM-1500, manufactured by EraserLaser GmbH. The unit was manufactured in 2025, has very few operating hours, and is in excellent, fully functional condition. This system is ideally suited for the fast, thorough, and non-contact removal of rust, paint, oils, grease, and oxide layers from metallic surfaces. Thanks to its high power of 1500 watts and the particularly long hose package, the unit offers maximum flexibility in professional workshop or industrial environments. The exact, cumulative operating hours can be read transparently directly on the system display. Product advantages & highlights: High flexibility: The 15-meter-long fiber optic hose package enables comfortable working, even on large components, in hard-to-reach areas, or on scaffolding. Precise control: Parameters such as laser power, frequency, and beam width can be set precisely via the intuitive 7-inch touch display and saved as presets. Gentle surface treatment: The variably adjustable pulse rate allows the heat input to be regulated precisely – also ideal for more sensitive workpieces or thin sheets. Reliable cooling: An integrated Hanli water cooling system ensures stable temperature monitoring and enables trouble-free operation in continuous mode. Hsdpfx Aoziwwiok Uenu Ergonomic cleaning gun: Equipped with a red preview laser for accurate alignment of the cleaning area and an automatic compressed air control to protect the optics from dirt particles. Technical data at a glance: Model: GL-C-CWM-1500 (mobile steel housing on heavy-duty rollers) Laser type: CW fiber laser (Continuous Wave), laser class 4 Wavelength: 1070 nm Laser power: 1500 watts (continuously adjustable from 10% to 100%) Laser frequency: 1000 Hz – 9000 Hz Cleaning width: 1 mm to 150 mm (variably adjustable) Fiber length (hose package): 15 meters Power connection: 220V AC / 32A connection (protected with 25A) Condition & scope of delivery: Condition: Very well-maintained used condition, low operating hours, optically and technically flawless. Protective lenses and optics are clean and fully operational. Scope of delivery: Laser cleaning system GL-C-CWM-1500 including 15m hose package and cleaning gun. Important safety note: The operation of a system of laser class 4 requires the mandatory wearing of approved laser safety glasses (DIN EN 207 for 1070 nm) as well as compliance with applicable occupational safety regulations (including extraction).

Condition: good (used), functionality: fully functional, Year of construction: 2010, We offer a variety of excavator buckets and trenching buckets with the VERACHTERT CW30 CW40 quick-change system (56cm between the "hooks"). Suitable for excavators from 20 tons upwards. All buckets are in good condition. Hnodezuybbopfx Ak Uou 1x Mass excavation bucket with teeth, 145cm cutting width, 6 teeth CAT system, approx. 1.5 cbm 1x Foundation bucket, 100cm cutting width, 150cm digging depth, smooth cutting edge, approx. 1 cbm 1x Trenching bucket, humus bucket with hydraulic swivel motor! 210cm cutting width, top-quality product from "Rädlinger". (The rock bucket with the 3 teeth shown in the picture has already been sold). Total price for all 3 buckets together, net: €12,500. Collection in 96231 Bad Staffelstein / Upper Franconia / Northern Bavaria. Delivery can be arranged, subject to reimbursement of costs. If you have any questions or require further information, please send us a message or call us. We also have a Verachtert sorting grapple and a power tilt with a HYDRAULIC Verachtert quick coupler for sale; take a look at our other offers!