Used Tomra T 600 for sale (76,118)

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Giodpfxjyguh Io Abren Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: used, all stainless steel Gjdpfxoyf D Hwe Abrjin nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: used, all stainless steel belt width 600 mm mobile mesh width 5 mm adjustable speed with air knives Gjdpfsyfd Tdjx Abrjin with batter pump

Condition: used, continuous teflon belt grill Gjdpfeydk H Iox Abroin suitable for thermo oil heated with lower and upper belt - bottom and top grilling belt width 600 mm adjustable speed product height electrically adjustable nett frying length 6.800 mm total length 9.300 mm total width 1.500 mm weight : 5.700 kg

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 5,033 h, load capacity: 5,000 kg, lifting height: 4,330 mm, free lift: 1,550 mm, fuel type: diesel, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Diesel, Diesel Forklift Truck Load Centre: 600 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Transmission: Automatic Condition: Ready for use and fully operational Technical Condition: Very good Front Tyres Type: Superelastic Front Tyres Condition: 80 - 100% Giedpfx Asx Ixrbebren Rear Tyres Type: Superelastic Rear Tyres Condition: 80 - 100% Description: Price includes new FEM safety inspection (UVV), paintwork in very good condition (new paintwork available for an additional €1,000 net), overall very good general condition. The machine will be fully serviced as part of the UVV inspection. We are happy to arrange economical transportation for you. Leasing options available! Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, road legal equipment (StVZO), full cabin, full free lift, CE certificate, fingertip control.

Condition: good (used), Year of construction: 2015, operating hours: 6,525 h, load capacity: 2,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,200 mm, Linde H20D-02/600 Triplex 470 Freelift/ Sideshift VW Diesel 2015 Video can be sent via Whatsapp. Continuous stock, see website. Prices are ex Nuland. Van de Wert Trading B.V. holds a variable stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties (see our terms and conditions). You can schedule a viewing and/or test drive without obligation. Giedpfsyi Uugox Abren Please call ahead as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, mileage: 789,639 km, power: 450 kW (611.83 HP), first registration: 08/2013, fuel type: diesel, empty load weight: 12,950 kg, maximum load weight: 19,050 kg, overall weight: 32,000 kg, tire size: 385/65 22,5, tire condition: 50 %, axle configuration: 8x4, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2013, operating hours: 789,639 h, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, number of beds: 1, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, truck registration, Reference number for inquiries: 68149 Volvo, FH16 * Year of manufacture: 2013 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Electric windows * Cab * Air conditioning * Power steering * Sleeper berth * Seat heating * Auxiliary heater * Stationary air conditioning unit * Cruise control * On-board computer * Differential lock * Additional headlights * Digital tachograph * OBU pre-installation (on-board unit) * Refrigerator * AdBlue tank * Fog lights * Comfort air-suspension seat * Multifunction steering wheel Giodpsv E Uqvsfx Abrsn * Sun visor * Air suspension * Transmission type: Automatic * Suspension: Leaf / air * Gross vehicle weight: 32,000 kg * Unladen weight: 12,950 kg * Payload: 19,050 kg * Permitted total weight: 32,000 kg * Tire condition, 1st axle: 60% / 50% – Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 60% / 60% – Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 30% / 30% – Tire size: 385/65 R22.5 * Tire condition, 4th axle: 50% / 50% – Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Permissible total combination weight: 180 tonnes * Stationary air conditioning * King pin: 3.5'' Liability disclaimer: Subject to change, prior sale, and errors excepted. More photos and videos are available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing * Arrangement of all (export) documents * Ordering of export license plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / cargo securing * TÜV inspection, registration service * Transfer of commercial vehicles Please contact our trained sales staff – we are happy to advise you.

Condition: used, The GEA oil fryer is used for flash or deepfrying coated and uncoated products. It is suitable for meat, fish, poultry, cheese, vegetables, potatoes and vegetarian dishes. all stainless steel suitable for thermal oil heated 12,7 kW frying length 3.000 mm belt width 600 mm Giedpfeyc Shkox Abren top hold down belt adjustable speed mechanical lid oil circulation pump oil level control suitable fire protection sediment removal system filter lifting unit with mechanical hoists total length ± 5.650 mm total width ± 1.800 mm total height ± 3.450 mm

Condition: used, machine/vehicle number: 16011, automatische Folieneinschlagmaschine - Wrapping & Shrinking Machines CMC FA-600 BT Godpeh Axp Nsfx Abrjin Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1995, Machine in parts for sale spare parts ..... CNC lathe, make GILDEMEISTER Type: CTX 600, year 1995 Gsdpfxjnximuo Abrjin Forkardt chuck 315 mm, tool turret Tailstock, steady rest Headstock Guide covers and sheets Motors Machine in individual parts for sale ..... Please ask what you need and we will send you an offer.

Condition: excellent (used), mileage: 1,400 km, power: 346 kW (470.43 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, crane, cruise control, fog lights, power mirror, trailer coupling, = Additional Options and Accessories = - Power brake booster - High beam headlights - Low noise emission - Speed limiter - Radio/cassette player - Sun visor - Stability control - Toolbox - PTO (power take-off) - Towing hitch = Additional Information = Giedpsyiungjfx Abron Axle configuration Front axle 1: Steerable Front axle 2: Steerable Weights Unladen weight: 20,680 kg Functionality Mast: Telescopic (10 sections) Lifting capacity: 7,560 kg Lifting height: 3,100 cm Crane: HMF 4020 K6+FJ 600-K4, mounted behind the cab Body manufacturer: HMF 4020 K-6 + FJ 600 K-4 CE marking: Yes Condition Technical condition: Very good Visual condition: Very good MAN TGX 35.470 HMF 4020-K6 + FJ 600K 4 JIB + WINCH EURO 6 L PACKAGE 470 HP DRIVE: 8x4 LEAF SUSPENSION WHEELBASE: 435 cm AUTOMATIC TRANSMISSION WITH ENGINE BRAKE TGS SLEEPER CAB WITH AIR CONDITIONING, NAVIGATION, LEATHER OPEN FLATBED WITH REMOVABLE ALUMINIUM SIDE PANELS FLATBED LENGTH: 630 cm LASHING EYES, POSTS HMF 4020-K6 CRANE + FJ 600K4 JIB 10X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL OIL COOLER FOR CRANE HYDRAULICS WORKING HEIGHT: 31 METERS MAX. LIFTING CAPACITY: 7,560 KG MAX. LIFTING CAPACITY AT 27 METERS: 430 KG 4X OUTRIGGERS 5th AND 6th FUNCTION FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, functionality: fully functional, Fast universal talent for furniture construction and more 9 controlled axes High axis speeds: 130 m/min / X-axis 75 m/min / Y-axis Machining of even the smallest parts (from 70x35 mm) Genuine 6-sided machining 2 automatic, independently controlled clamping grippers Horizontal machining also from the gripper side 3 independent drilling heads with a total of 47 drilling spindles grooving saw unit Godpfx Aotu I Ntjbrsin Milling spindle top and bottom Air cushion table in the infeed and working area Panel return in the outfeed Barcode scanner

Condition: ready for operation (used), empty load weight: 3,300 kg, additional equipment features: Diamant tools, + afzuiging + koelmelk groep Grindingwidth: 375 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 375 mm Travel Z-axis (autom.): 350 mm Giedpfx Aboxp Skdersn Dimensions magnetic table: 600 x 350 mm Max dia grindingstone: 300 x 50 x 76.2 mm Spindlespeeds: 2900 rpm Motorpower: 9 kW Tension needed: 400V Cooling system: yes

Condition: used, continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm Gisdpfx Absycqrzorsn electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed dimensions (l x w x h) : ± 3.400 x 1.800 x 2.000 mm

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar. Giedex Altfepfx Abrjn

Condition: used, Year of construction: 1999, Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 Godpok Abtpefx Abrsin RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising) Incline: 191 mm / 90° = 764 mm / 360° Support feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gearmotor SA37/T DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) year of construction: 1999 Optionally available: Supports Side guide one and both sides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1999, Transnorm belt conveyor 800-600-500 Gedpfjk Au A Usx Abrsin RA2041 The Transnorm belt conveyor is from 1999 and in a good (used) condition. It is perfect as a feeder belt and has a Van der Graaf brand motor. Supports are not included in the delivery. These are available as an option. Technical data: Manufacturer: Transnorm Type: TS 1100 belt conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional conveying length (FL): 800 mm nominal/outer width (NB): 600 mm belt width (GB): 500 mm overall height (BH): 85 mm motor height (MH): 545 mm Motor type: SEW motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: 1,02 m/s Weight: 60 kg Scope of delivery: without supports (if required, please ask) Optional: Supports Sideguides Frequency converter We can also extend the conveyor to your needed dimension Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Year of construction: 1998, Transnorm conveyor belt GF 15000-600-500 RA2067 Technical data: Conveyor length (NL): 15000 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Godpfon I Uwiox Abroin We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm conveyor belt GF 12330-600-500 RA2072 Technical data: Conveyor length (NL): 12330 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,25 Drive: SEW gear motor R27 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. Giodpfx Absn R Uatjren We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm curved belt conveyor left 90°-800-600-IR600 RA2169 Make: Transnorm Running direction: 90° left running belt conveyor width (RB): 600 mm Nominal/outer width (NB): 800 mm Nominal/outer width with Motor (MB): 1020 mm Inner radius (IR): 600 mm Height frame (BH): 200 mm Height frame with Motor (MH): 400 mm V 220/380, 0,37kW Conveying speed: contat us Optionally available: Gsdpfxeq Awyte Abrein Supports Side guide one- and both sideds Frequency converter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Just contact us by phone or mail or visit our website We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm conveyor belt GF 3800-700-600 RA2182 Technical data: Conveyor length (NL): 3800 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Gsdpeq H T Rrjfx Abrein Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm belt conveyor GF 4900-700-600 RA2185 Technical data: Conveyor length (NL): 4900 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 300 mm with motor support feet: optional Conveying speed (v m/s): 0,75 Drive: SEW gear motor, R27 DRE90M4/TH Gisdpsq H T Rysfx Abrsn Electrical data: 50Hz V380-500, kW 1,1 S1 drive drum: Ø = 81 mm belt return roller: Ø = 81 mm Year of manufacture: 2185 Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Customize length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 2200+1300-700-600 Gedpoq H T Sajfx Abrsin RA2189 Technical data: Conveyor length (NL): 3500 mm ( 2200 mm incline + 1300 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 2200+900-700-600 RA2190 Technical data: Conveyor length (NL): 3100 mm ( 2200 mm incline + 900 mm arch) frame width (NB): 700 mm belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Gjdpfx Aboq H T Sdjroin Drive: SEW gear motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, Transnorm Rising falling Incline with arch belt conveyor GF 4500+700-600-500 RA2195 Technical data: Conveyor length (NL): 5300 mm ( 4600 mm incline + 700 mm arch ) frame width (NB): 600 mm belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Gisdpfx Asq Imt Uobren Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics