Used Toolroom Lathe for sale (5,482)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 25728, Equipped with: Hydraulic Unit Sinumerik 840D sl CNC Control Slim Line Operator Panel OP012 W/12 TFT-Color Display 19" Machine Control Panel 20 Tool ATC CAPTO C6 Multifunctional Tool Carrier For Turning and Driven Tools One Fixed Tool Unit Assembled To The Compound Slide W/Coolant Thru The Turning And Drilling Tools, Coolant For The Driven Spindle From The Outside Drilling Spindle Additional Drill Spindle For Orientation Chip Conveyor Coolant Equipment -Including piping and shut-off valve and flow control switch -To supply coolant to tools for coolant and flushing through the cutting tools -To supply coolant for flushing the work piece and chuck -To supply coolant for flushing the working area Paper Band Filter Immersion Cooler High Pressure Coolant Pump, 40 Bar Through Tools Flushing Pistol, Hand Held Air Cleaner - Mechanical Separation "Mist Collector" Tool Life Display Remote Diagnostics Signal Lamp Automatic Door For Loading W/Shuttle Load and Unload Shuttle Swivel Loader Automation Cell Tuned for Part Pallet Conveyor For 20 Raw And Finished Parts Pallets Pallets Designed for Part 596500 Handling System SPC Station (Maximum O 270 mm, Maximum H 150 mm, Maximum Wt. 12 kg) NIO Station (Closing forward leading gravity) Skiving Software (Hardware: Software and user surfaces for skiving technology) Measuring Probe (For measuring diameters and length of the workpiece in the machine) Measuring Software for Teeth Measuring (MDK and Flank Line, Software and User) Measuring Program (Automatically measuring program for measure the position of the two gears to each other, after using sister tools) SPC (Every X workpieces the MDK needs to be measured) Tool Changer (Precut, measurer and final cut) Skiving Tool Identification (Hardware, software for the identification of the skiving tool after tool change) Hydraulic Diagrams Coolant Diagrams Gjdpfew Iqumox Aftjkf Lubrication Diagrams Electrical Wiring Diagrams Hardcopy of Diagrams CF Certificates Specifications: Workpiece Spindle: -Speed: 0-7000 l/min -Power: 55,2 - 59,7 kW Tool: Capco C6 Tool Spindle: -Speed: 0-6000 l/min -Power: 29 - 41 kW Machine Weight, Floor Space and Voltage Supply: -Operating Voltage: 400V, 3 Phases, 50 Hz -Control Voltage: 24 V -Lighting Voltage: 240 V, 50 Hz -Floor Space: 2,700 x 2,600 mm -Height: 4,000 mm -Total Weight, Approximate: 16,000 kg Longitudinal, Z-Axis: -Stroke: 800 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Transverse, X-Axis: -Stroke: 900 mm -Rapid Rate: 24 m/min -Feed Force: 12 kN Tool Spindle, B-Axis: -Range: -20 / +90 Degree Y-Axis for Spindle Unit: -Stroke: 200 mm -Rapid Rate: 12 m/min -Feed Force: 6 kN C-Axis Main Spindle: -Positioning Accurace: 9" Multifunctional Tool Carrier: -Power: 29 kW at 100% ED -Power: 41 kW at 44% ED -Torque: 141 Nm at 100% ED -Torque: 212 Nm at 44% ED -Spindle Speed: 0-6000 min-1 -B-Axis for Stepless Motion in a Range Of: -20/+90 Degree Tool Magazine: -Maximum Tool Diameter: 100 mm -Approximate Tool Length: 300 mm -Approximate Tool Weight: 12 kg Swivel Loader: -Maximum Workpiece Diameter: 270 mm -Height: 150 mm -Weight: 16 kg

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 Gkjdpjwwaruefx Aftof tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2014, 780mm Swing, 630mm Swing over the Cross-Slide, 481mm Max Cutting Diameter, 790mm max cutting length, 12 Station Turret, 76mm bar capacity, Gkjdpfx Afox Eluwetef 3500rpm, 22kW Spindle, Fanuc Oi, Tool setter, 10” 3 jaw chuck, Low Volt Light, Tailstock, Swarf Conveyor, Coolant.

Condition: good (used), turning diameter over cross slide: 530 mm, turning length: 500 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 520 mm, Mori Seiki CL-253 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Control System: Mori Seiki MSG-803 Chip Conveyor: Not equipped Machining Capacity Maximum Turning Diameter: approx. 350 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 530 mm Axis Travels X-Axis Travel: approx. 220 mm Z-Axis Travel: approx. 520 mm Spindle Spindle Nose: A2-6 Spindle Bore: approx. 65 mm Maximum Bar Capacity: approx. 52 mm Gkodjx Hp Rfjpfx Aftof Spindle Speed: up to 3,500 rpm Spindle Motor Power: approx. 15 kW Turret Tool Turret: 10-Station Turret Tool Size: 25 × 25 mm Machine Data Machine Weight: approx. 4,500 kg Machine Dimensions (L × W × H): approx. 2,800 × 1,650 × 1,750 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 11,500 h, functionality: fully functional, MORI SEIKI CNC Lathe Model: NL1500MC/500 Gkodpfx Afsx Hichotjf Turret: 16 position VDI 30 Description: Single-spindle, single-turret CNC lathe with driven tool holders, C-axis, and tailstock Year: 2007 Production hours: 11,500 hours Recent key service interventions: 14/02/2025: geometric check 23/10/2024: clamping solenoid valve replacement 22/02/2024: screen replacement 04/01/2022: power inverter replacement Supplied tooling: 5 square turning holders 20 mm 5 drilling holders D25 and D32 3 axial driven tool holders 2 radial driven tool holders Machine in very good condition, video available

Condition: used, MOSTANA STANKO 1M65-5 HEAVY DUTY CENTRE LATHE MAKE MOSTANA STANKO, MADE IN USSR MODEL 1M65-5 YEAR MID 80s SWING OVER BED 1000.0 mm SWING OVER SADDLE 650.0 mm CHUCK SIZE 1000.0 mm Godpfxox Dmi Dj Aftekf SPINDLE BORE 135.0 mm SPINDLE SPEEDS 5- 500 RPM SPINDLE POWER 22 Kw PLUS POWER FEED TO THE SADDLE METRIS AND ENGLISH SCREW CUTTING 1000.0MM 4 JAW CHUCK 2 AXIS DIGITAL READOUT CLEAN BED WORKED ON COMPOSITE, NO METAL

Condition: used, Year of construction: 2022, turning diameter 0500 mm turning length 1200 mm control 840D Siemens turret head 12 swing over bed 500 mm Gkedpfx Afox Hpzwstof spindle turning speed - stepless 10- 5000 rpm spindle bore 87 mm feed - longitudinal/cross 10000 mm/min rapid travel - longitudinal/face 30 m/min dimensions 5000 x 3000 x 2300 mm total power requirement 105 KW weight of the machine ca. 12 t Machine with counter spindle, live tooling with C- axe and Y- axe. Machine will come with accessories.

Condition: good (used), Year of construction: 2013, control Siemens 840D sl Gksdsv Nw Npjpfx Aftjf turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: good (used), Year of construction: 2016, 300mm turning diameter, 510mm turning length, Y axis +/- 52.5mm, 600mm swing, 65mm bar capacity, spindle speed 4,500rpm , Gksdpfex Elr Ajx Aftef 16 station turret, 15kW spindle motor, milling 6000rpm, C axis 0.001 degrees, sub-spindle speed 6,000rpm, Y axis +/- 52.5mm, Doosan FANUC-i control, tailstock, coolant, tool setter, parts catcher, 3 jaw chuck,low volt light

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 12-Station Tool Size: 25 × 25 mm Equipment & Features Hydraulic Tailstock Tool Presetter 6.5" 3-Jaw Power Chuck Coolant System Machine Weight: approx. 4,000 kg Gsdpfsx Hp Ikox Aftjkf Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: used, Year of construction: 1996, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Geminis Lathe Type: CNC5/PLUS/1000/4000 CNC control: Fagor Year: 1996 With 2 steadies Gkedpfx Ajxvr E Ioftef + Tooling With 2 chucks Can be inspected under power Video available

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 Number of working hours ca. 20.564 h auto power on hours ca. 28.664 h weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Gkedpsx Hp Epefx Aftof Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm control 810D Siemens turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm spindle bore 45 mm feeds 0- 12 m/min voltage 400 V connected load 14 KW face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm Gkjdpfxsx Hpyyo Aftef main drive motor 10,2 kW weight of the machine ca. 1,7 t Machine has 8 position turret with 6 pos. live tooling. Machine has VDI 20. Machine is with tailstock !

Condition: good (used), Year of construction: 2006, control FANUC 21i-TB Control x-axis 390 mm z-axis 780 mm spindle taper A2-11 number of spindle speeds 2000rpm Gksdpfx Afevzln Rjtjf engine output 37 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 1905,0 × 2720,0 × 3260,0 m The machine has chucks that can produce gears from 100 to 500 mm. Special chuck is available

Condition: excellent (used), Year of construction: 2019, 256mm maximum cutting diameter, 458mm max turned length, 4,800rpm spindle speed, 51mm bar capacity, 12 station VDI turret, 16kW spindle motor, Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor Gkedsx D Uy Rjpfx Aftjf

Condition: used, Year of construction: 2003, turning length: 630 mm, turning diameter: 850 mm, spindle bore: 130 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 830 mm, Mori Seiki SL-403B/800 CNC Lathe (2003) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 2003 Control System: Mori Seiki MSX-501II Maximum Turning Diameter: approx. 630 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 850 mm X-Axis Travel: approx. 345 mm Gkedpjx Hp Eiefx Aftef Z-Axis Travel: approx. 830 mm Spindle Nose: A2-11 Spindle Bore: approx. 130 mm Maximum Bar Capacity: approx. 102 mm Spindle Speed: up to 3,000 rpm Spindle Motor Power: approx. 30 / 37 kW Tool Turret: 12 Stations Tool Size: 25 × 25 mm Machine Weight: approx. 9500 kg Machine Dimensions (L × W × H): approx. 4,200 × 2,000 × 2,100 mm

Condition: good (used), Year of construction: 1991, For sale Mazak SQT 10 M Lathe Manufactured in 1991 Main Technical Specifications (Year 1991) Feature Specification Machine type Horizontal CNC lathe with live tooling and C axis CNC Control Mazatrol T32-3 Max turning diameter 230 mm (9 inches) Max machining length Approx. 300 mm to 305 mm (or 12 inches) Axis travels X axis: 160 mm; Z axis: 455 mm (or 17.93") Main spindle speeds 35 to 6,000 rpm Spindle motor power Typically 11 kW (approx. 15 HP) Turret capacity 12 positions (with live tooling capability) Live tools Speed from 120 to 3,000 rpm Machine weight Approx. 3,600 kg to 3,850 kg BT MACHINES Gkjdpfxjx E R Amo Aftof PURCHASE AND SALE ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Gjdpfx Afewwar Istjkf Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: good (used), Year of construction: 2013, Distance between Centres 1250mm, Swing 470mm, swing over cross-slide 257mm, Spindle Speed 2500rpm, 80mm spindle bore, Prototrak SLX control, Gksdpsx Dk Svsfx Aftef Quick change toolpost, manual 3 jaw chuck, Coolant, interlocked guards

Condition: used, Year of construction: 2003, turning length: 630 mm, turning diameter: 850 mm, spindle bore: 130 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 830 mm, Mori Seiki SL-403B/800 CNC Lathe (2003) Godpfx Asx Hp A Uoftskf Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 2003 Control System: Mori Seiki MSX-501II Maximum Turning Diameter: approx. 630 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 850 mm X-Axis Travel: approx. 345 mm Z-Axis Travel: approx. 830 mm Spindle Nose: A2-11 Spindle Bore: approx. 130 mm Maximum Bar Capacity: approx. 102 mm Spindle Speed: up to 3,000 rpm Spindle Motor Power: approx. 30 / 37 kW Tool Turret: 12 Stations Tool Size: 25 × 25 mm Machine Weight: approx. 9500 kg Machine Dimensions (L × W × H): approx. 4,200 × 2,000 × 2,100 mm

Condition: good (used), Year of construction: 2008, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 52mm bar capacity, 12 station VDI30 turret, 14.7kW Spindle Motor, Spindle Speed 5000rpm, Gedox Dk Azjpfx Aftskf collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor, Barfeed.

Condition: good (used), turning diameter over cross slide: 510 mm, turning length: 500 mm, turning diameter: 320 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-200/500 CNC Lathe Year: around 1999 Machine Type: CNC Turning Center (2-Axis) Control System: Mori Seiki SMC-500 Maximum Turning Diameter: approx. 320 mm Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 65 mm Maximum Bar Capacity: approx. 51 mm Spindle Speed: up to 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 10 Stations Gkedpfx Ajx Hpx Nsftef Tool Size: 25 mm Machine Weight: approx. 4,500 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: good (used), Year of construction: 2016, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 305mm, Gksdpfxjx Dk Aho Aftsf 593mm maximum cutting length, 50mm Bar capacity, 8” chuck, 20Hp Spindle Motor, C axis 0.01 degrees, Y axis +/- 51mm, 4000rpm spindle, 12 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 1998 Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Spindle Speed: up to 2,400 rpm Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm Gjdpfxsx Hpw So Aftskf

Condition: used, Year of construction: 1998, turning length: 800 mm, turning diameter: 600 mm, spindle bore: 127 mm, spindle speed (max.): 2,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, Mori Seiki SL-400B CNC Lathe (1998) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 1998 Gkodpfx Afsx Hpvustjf Control System: Mori Seiki MSC-501 Machining Capacity Maximum Turning Diameter: approx. 600 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 940 mm X-Axis Travel: approx. 343 mm Z-Axis Travel: approx. 993 mm Spindle Nose: A2-11 Spindle Bore: approx. 127 mm (5") Spindle Speed: up to 2,400 rpm Spindle Motor Power: approx. 30 kW Tool Turret: 12 Stations Machine Weight: approx. 9,500 Machine Dimensions (L × W × H): approx. 4,300 × 2,000 × 2,100 mm