Used Toolroom Mill for sale (9,707)

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter 356 mm turning length 510 mm control M 730 BM travel -x axis 260 mm travel -y axis -50 / +50 mm travel -z axis 590 mm Travel subspindle (B) 624 mm bar material dia. 65 mm main spindle speeds: 5000 transmission ratio 2 power capacity 15 / 11 kW Subspindle spindle speeds 6000 power capacity 11 / 7,5 kW rapid traverse (X,Y,Z,B) 30/10/30/30 m/min weight of the machine ca. 6,6 t Additional information * CNC control Mitsubishi M 730 BM * Mainspindle with 3-jaw power chuck KITAGAWA N-08, diameter 210 mm * Subspindle with 3-jaw power chuck HAINBUCH B-TOP 165-43 * 12-station turret, tool spindle speed 10000 rpm, power 5.5/3.7 kW * Y-axis travel * C-axis * High/low pressure chuck system for main and subspindle * MABEO high-pressure pump with 1.5 MPa filter unit * Coolant sprayer on the chuck for main and subspindle * Coolant sprayer for the machine bed cladding * Oil mist separator * Chip conveyor * Renishaw workpiece measuring system with optical signal transmission, subspindle * Cooling of the ball screw in the X-axis Cjdsyycggjpfx Ab Uegr * Gantry loader, left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Technical details turning diameter 760 mm turning length 1540 mm control Fanuc 31i-B dimensions of machine 5500 x 2700 x 3110 mm chip conveyor 6900 x 2400 mm total power requirement 94,42 kW weight of the machine ca. 15,5 t Additional information Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and subspindle. Condition: Very well preserved, machine comes from a company liquidation. Time recording: Control unit on: 13127 hours Runtime: 3833 hours Processing time: 2835 hours The upper head is fed by a tool magazine and can turn or mill at various angles. Even highly complex components can be completely machined without further repositioning. Fanuc 31i-B CNC control Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Maximum bar diameter (manual/continuous): 76/76 mm Y-axis travel: 230 mm (±115 mm) Clamp (counter spindle) ASA interface: A2-8 Spindle speed: 4000 rpm AC motor power (cont./30 min.) 22/26 kW Turning/milling head B-axis rotation / indexing 240 deg. (±120 deg.) Tool holder Capto C6 Speed in revolutions per minute 12000 rpm AC motor power 30 min. 15/18.5 kW Number of tools 40 (Opt. 80) Tool turret Number of driven tools 12 (12) Number of driven tools 7.8 kW/30 min. Codsyycd Eepfx Ab Ujgr

Condition: ready for operation (used), Year of construction: 1988, operating hours: 36,452 h, Boley BDN 160 ZB Cjdpfx Abewwbato Usgr including LNS Hydrobar bar feeder manuals various tools

Year of construction: 2005, condition: used, Used machine Year of manufacture: 2005 Equipment and technical specifications: Blockhouse milling machine BL100A – Four-spindle unit Designed for the production of chalet corner joints by milling all four sides of the log beam in a single clamping operation using 2x vertical and 2x horizontal milling spindles. Processing dimensions: 140 x 200 mm Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 4 x 220 x 100 mm Motor power: 4 x 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Operation: Triggered by two-hand control / via control unit Milling depth adjustment via spindle, digital counter Workpiece clamping device: 2x vertical pneumatic clamps Extraction: Underfloor extraction funnel, diameter 160 mm Complete with electrical equipment, PLC control, and pneumatics. Machine base prepared for integration of an end groove and drilling unit as well as the cross-cut saw. Enclosed machine housing with hinged safety hood (supported by gas strut) and viewing window. Electric control cabinet mounted on base with 3.0 m cable duct. Ready for operation, but without tools! 2 horizontal clamps on the BL100 machine table Operation: Pneumatic, accessible from the front Automatic clamping cycle via PLC control. End groove unit Milling spindle diameter: 30 mm Milling cutter diameter x width max.: 180 x 40 mm Motor power: 3.0 kW Speed: 4,200 rpm Feed: Hydropneumatic, infinitely adjustable with rapid traverse function Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, without cutter! Horizontal drilling unit with drill guide and chip guard Drill diameter max.: 30 mm Motor power: 1.1 kW Speed: 1,500 rpm Feed: Pneumatic, infinitely adjustable with rapid traverse for idle stroke Height adjustment via spindle, digital counter Workpiece clamping device: Additional 1x vertical pneumatic clamp Integrated in the BL100, complete with electrical equipment and pneumatics. Ready for operation, with drill bit D=20mm! Under-table crosscut circular saw in BL100A – For automatic operation only! Max. cutting size (WxH): 200 x 140 mm Saw blade diameter: 500 mm Motor power: 4.0 kW Cutting speed: 86 m/s Feed: Pneumatic Operation: Only via automated program (not included in delivery) Workpiece clamping device: Pneumatic Extraction funnel: diameter 120 mm Integrated in the BL100A, complete with electrical equipment and pneumatics – Ready for operation, including saw blade! Prepared for automatic operation Includes sliding table (mechanics, pneumatics, and electrics) for the end groove milling unit and the electrical interface for controlling the functions of the BL100A using an external Tigerstop control system. Infeed table length: 9 m Cedpfxjyxyane Ab Uegr Outfeed table length: 4 m Further technical description to follow Availability: End of March / Beginning of April 2026 Location: Netherlands

Condition: used, max. workpiece diameter 500 mm threading length 800 mm Cgodpfx Aeyy A Spjb Uer max. module 4 (8) min. module 1 clamping length max. 850 mm weight of the machine ca. 3,2 t dimensions of the machine ca. 3,1 x 1,1 x 1,6 m

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 2RT Bed-Type Machining Center with Rotary Table – Available at Short Notice The LAGUN BM 2RT is a highly rigid bed-type machining center with a rotary table designed for heavy-duty and precision machining. Ideal for both single-part production and series manufacturing with the highest demands on rigidity, precision, and reliability – all without the need for complex foundation work. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Leasing / financing available ✔ No special foundation required (standard industrial flooring is sufficient) ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the manufacture of bed-type milling machines. The machines impress with high reliability, easy maintenance, and economical operation. Technical specifications: Control: HEIDENHAIN TNC 640 CNC control + 19" TFT display HEIDENHAIN motors, measuring systems, and HR-510 electronic handwheel Cooling: Internal coolant supply (IKZ) 36 bar Tool changer: 40-position chain magazine with double gripper Chip removal: Dual hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracies: Positioning accuracy: ± 0.015 mm Repeat accuracy: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service Cgjdpfx Aboff Hz Ho Uer ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a customized quotation.

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,000 mm, table width: 2,000 mm, torque: 1,288 Nm, coolant supply: 36 bar, spindle motor power: 40 W, Equipment: documentation/manual, rotational speed infinitely variable, LAGUN ML 8 Travelling Column Milling Machine The LAGUN ML 8 is a highly dynamic travelling column milling machine designed for the precise machining of large and complex workpieces. It is ideal for both single-item production as well as series manufacturing where top requirements for accuracy, stability, and flexibility are crucial. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Lease-purchase / financing available ✔ High flexibility thanks to travelling column concept ✔ 24-month warranty Why choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in milling machine engineering. The machines impress with their reliability, ease of maintenance, and cost-effective operation. Technical specifications: Control: HEIDENHAIN TNC 7 digital path control system HEIDENHAIN 19" TFT screens HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Tool changer: Automatic tool changer (ATC), 60 positions Chip disposal: Hinged belt conveyor Enclosure: Three-sided perimeter enclosure Accuracies: Positioning accuracy: ±0.050 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ Technical support and service on site ✔ Fast spare parts supply Csdpfoh Ekucex Ab Uogr ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide an individual quotation.

Condition: new, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 24,000 m/min, rapid traverse Y-axis: 24,000 m/min, rapid traverse Z-axis: 24,000 m/min, table load: 10,000 kg, position of the milling head: Vertikal, workpiece weight (max.): 10,000 kg, torque: 1,392 Nm, overall weight: 30,000 kg, spindle nose: SK 50 - DIN 69871/A, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, STARVISION DX 3220 Gantry Milling Machine – Available at Short Notice The STARVISION DX 3220 is a high-precision gantry milling machine designed for processing large and heavy workpieces. Ideal for mold making, mechanical engineering, contract manufacturing, and demanding machining tasks requiring excellent stability, dynamics, and accuracy. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / hire purchase available ✔ High rigidity for heavy-duty machining ✔ 24 months warranty Why STARVISION: STARVISION stands for modern gantry milling machines with high precision and efficient machining capabilities. The robust gantry construction, powerful drives, and high-quality components make the machine ideal for demanding applications. Technical specifications: Control: HEIDENHAIN TNC 640 CNC contouring control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measurement systems, and electronic handwheel Cooling: Internal coolant supply (IKZ) 70 bar Cedpfxjhy Avpo Ab Uegr Tool changer: 60-position chain magazine with double gripper Chip disposal: Hinged belt chip conveyor (transverse) Twin screw conveyor (longitudinal) Prepared for: Preparation for 4th axis (rotary table) Enclosure: Fully enclosed, closed top Accuracies: Positioning accuracy: ± 0.035 mm Repeatability: ± 0.028 mm Your benefits as a JMT customer: ✔ Official distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide you with a tailored quote.

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 12,000 kg, table length: 4,100 mm, workpiece weight (max.): 12,000 kg, overall weight: 26,500 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 4 Bed-Type Milling Center – Available at Short Notice The LAGUN BM 4 is a highly rigid bed-type milling center designed for heavy-duty and precise machining operations. It is ideal for both one-off manufacturing and series production, meeting the highest demands for rigidity, accuracy, and reliability – all without the need for complex foundation work. Your Benefits at a Glance: ✔ Installation & commissioning within Germany included ✔ Service & spare parts directly through JMT ✔ Lease purchase / financing options available ✔ No special foundation required (standard industrial floor sufficient) ✔ 24 months warranty Why Choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (part of MAHER HOLDING), known for its robust construction, high dynamics, and decades of experience in building bed-type milling machines. The machines are characterized by high reliability, ease of maintenance, and cost-effective operation. Technical Specification: Control System: HEIDENHAIN TNC 640 CNC path control + 19" TFT display HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (IKZ) 36 bar Tool Changer: 24-station drum magazine with double gripper Chip Removal: Double hinged belt conveyors (front and rear) Prepared for: 4th axis (rotary table optionally available) Cedpfx Abeh Ekrzo Uogr Enclosure: Full enclosure (perimeter design) Accuracies: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Your Advantages with JMT: ✔ Official LAGUN distributor in Germany ✔ Local technical support and service ✔ Fast spare parts supply ✔ Training and operator instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a customized quotation.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, LAGUN CM 6 Travelling Column Milling Machine – Available at Short Notice The LAGUN CM 6 is a high-dynamic travelling column milling machine designed for precise machining of large and complex workpieces. Ideal for both single-part manufacturing and series production, fulfilling the highest requirements for accuracy, stability, and flexibility. Your Advantages at a Glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Leasing / financing options available ✔ High flexibility thanks to travelling column design ✔ 24-month warranty Cgedpjvrv Suefx Ab Uer Why Choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), known for robust construction, high dynamics, and decades of experience in milling machine design. These machines stand out for their reliability, ease of maintenance, and economical operation. Technical Specifications: Controls: Two HEIDENHAIN TNC 7 digital path controls – one at the front of the machine and one at the rear, inside the cabin 2 x HEIDENHAIN TFT displays, 19" HEIDENHAIN motors, measurement systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (IKZ) 36 bar Tool Changer: Automatic tool changer (ATC), for 60 tools Chip Disposal: Hinged belt conveyor Preparation: Prepared for rotary table / 4th axis Enclosure: Three-sided perimeter enclosure Precision: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Your Advantages as a JMT Customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and provide a personalized offer.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,100 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 3 Bed Type Milling Center – Available for Immediate Delivery The LAGUN BM 3 is a highly rigid bed type milling center engineered for heavy-duty and precise machining. Ideal for both single-part production and series manufacturing where maximum rigidity, accuracy, and reliability are required—all without the need for complex foundation work. Your Benefits at a Glance: ✔ Installation & commissioning included within Germany ✔ Service & spare parts directly via JMT ✔ Leasing / financing options available Cedpfeh Ekrtjx Ab Uogr ✔ No special foundation required (standard industrial floor is sufficient) ✔ 24-month warranty Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), renowned for robust construction, high dynamics, and decades of experience in building bed type milling machines. These machines impress with high reliability, easy maintenance, and economical operation. Technical Specifications: Control System: HEIDENHAIN TNC 640 CNC path control + 19" TFT display HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (IKZ) 36 bar Tool Changer: 24-position drum magazine with double gripper Chip Removal: Double hinged belt conveyor (front and rear) Preparation: Prepared for 4th axis (rotary table optional) Enclosure: Full perimeter enclosure Accuracies: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your Benefits with JMT: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Operator training and commissioning included ✔ Reference machines available in Germany Contact us – we are happy to advise you and provide an individual quotation.

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Codpjyyxnysfx Ab Ujgr Drive motor 250 kw

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Cgsdsyyxk Iepfx Ab Uor With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Codjyyxikepfx Ab Usgr Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: good (used), Year of construction: 2004, Machine-Details: Stock-No. 1022-2394 Type of machine Tool Room Milling Machine - Universal Make AVIA Type FNE 40 NC Year of manufacture 2004 Type of control CNC Storage location Monheim (Germany) Country of origin Poland Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 Cgsdpfx Abeyx Eudo Ujr spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information: * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), Year of construction: 2009, functionality: fully functional, Machine-Details: Stock-No. 1022-2400 Type of machine Bed Type Milling Machine - Universal Make KIHEUNG Type U 1350 Year of manufacture 2009 Cjdpfx Asyx D S Ueb Usgr Type of control CNC Storage location Monheim (Germany) Country of origin Korea Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information: In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Machine-Details: Stock-No. 1022-2416 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 1 Year of manufacture 2000 Type of control conventional Storage location Monheim (Germany) Country of origin Germany Cgedpfx Aoyx D Iveb Uor Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information: The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 1989, functionality: fully functional, Machine-Details: Stock-No. 1022-2375 Type of machine Tool Room Milling Machine - Universal Make DECKEL Type FP 3 A Year of manufacture 1989 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex site, loaded on truck Technical details: x-travel 400 mm y-travel 390 mm z-travel 350 mm Control DIALOG4/CONTOUR 3 tool taper SK 40 spindle turning speed range 31 - 3150 U/min feed range 10 - 2000 mm/min weight of the machine ca. 1,7 t dimensions of the machine ca. 1.600 x 2.500 x 2.000 mm Additional information: CNC control DIALOG4/CONTOUR 3 Cgedpfx Aoyx D Eneb Uor Table: 700 x 480 mm rigid angle table Swivel-type vertical milling head Coolant tank

Condition: good (used), Year of construction: 1962, Manufacturer: VEB Fritz-Heckert-Werk Karl-Marx-Stadt Model: GFL 400x1000 Machine designation: GFL Year of manufacture: 1962 Serial number: 47015 Machine type: Long thread milling machine Total weight: 3 t Table size: 400 x 1000 mm Power supply: 3~ three-phase Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Connected load: 3.7 kW Rated current: 8 A Fuse: 10 A Csdpfx Aeyyvtgjb Usgr Condition: operational

Condition: not inspected (used), Year of construction: 2003, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, CNC milling machine from Kunzmann for industrial machining tasks. Condition: unknown Manufacturer: Kunzmann Maschinenbau GmbH Model: BA1200 Codpfsyyvnwex Ab Uegr Machine No.: 120006 Year of manufacture: 2003 Machine type: CNC machining center Design: vertical Control system: HEIDENHAIN Travel X: 1200 mm Travel Y: 600 mm Travel Z: 600 mm Table size: 1400 x 600 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 63 A

Condition: good (used), Year of construction: 2007, travel distance X-axis: 1,400 mm, travel distance Y-axis: 700 mm, CNC milling machine from Kunzmann for demanding machining tasks in industrial applications. Condition: good, in operation. Cedeyyuw Rjpfx Ab Uogr Manufacturer: Kunzmann Maschinenbau GmbH Model: BA1400 Machine No.: 120014 Year of manufacture: 2007 Machine type: CNC machining center Design: vertical Travel X: 1400 mm Travel Y: 700 mm Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 35 kVA Rated current: 50 A Main fuse: 63 A Machine weight: 12000 kg

Condition: good (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 450 mm, Manufacturer: Kunzmann Maschinenbau GmbH Model: BA600 Machine No.: 600129 Year of manufacture: 2004 Control: HEIDENHAIN Machine type: CNC machining center Design: vertical X travel: 600 mm Y travel: 400 mm Csdpfx Aoyyul Usb Uogr Z travel: 600 mm Table size: 750 x 450 mm Table load capacity: 500 kg Spindle taper: SK40 Spindle speed: up to 9000 rpm Tool changer: 24 stations Operating voltage: 400 V / 50 Hz Control voltage: 24 V Power: 18 kVA Rated current: 25 A Main fuse: 35 A Machine weight: approx. 3100 kg Coolant system: Knoll Maschinenbau GmbH Type: 400 K-1/150 Year of manufacture: 2001 Serial No.: 133337 Equipment: Tool changer Equipment: Fully enclosed safety housing

Condition: excellent (used), Year of construction: 1993, Manufacturer: SCM Cgsdpfx Aoyx Nadob Usr Model: T150 Class Year of manufacture: 1993 Motor upgraded: 5.5 kW Tilting range: -10° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable Speed settings: 3000/4500/6000/7000/10,000 rpm Forward/reverse rotation Table size: 2700 x 700 mm Spindle diameter: 30 mm Table extension: 2 x 650 mm Extendable frame support Aluminum fence jaws Milling fence with fine adjustment - Electric height adjustment - Electric tilt adjustment Feeder: Wegoma VS 44 - 4 rollers Extraction connection: 120 x 120 mm Space requirement: approx. 2700 x 1300 x 1600 mm Weight: approx. 1000 kg Location: 54634 Bitburg, loaded free on truck, unpacked Delivery as-is, as inspected and function tested without refurbishment, without warranty or guarantee

Year of construction: 2023, condition: excellent (used), Zerma Amis granulator type: GSE 700/1400 C 7-3 GSE 700 Economic compact granulators Externally adjustable knives using setting gauge Mobile, compact design Optimal accessibility Aggressive, tangential material feed Screen perforation: 4 mm Drive: 90 kW Feed opening: 720 x 1400 mm Rotor diameter: 700 mm Rotor knives: 7 x 4 Stator knives: 3 Weight: 6700 kg Prepared for extraction system Housing upper part opening: hydraulic Screen basket operation: hydraulic Location: ex customer site - immediately available - Cedpfxeyx I R Us Ab Ujgr Subject to prior sale.

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm Cgodpevwgm Hefx Ab Uor spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.