Used Trumpf Trubend 3120 for sale (389)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format Knjdpfx Agexn Tywj Aod TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Year of construction: 1990, condition: used, Trumpf Trumatic 240 punching machine, year 1990, currently disconnected and ready for transport Kedpexq Nqwsfx Ag Asnd

Condition: excellent (used), functionality: fully functional, operating hours: 58,000 h, laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 Knedpfx Asrgaw Hsg Aod EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection Knsdpfx Agoxhmtws Aed - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2014, operating hours: 23,000 h, control type: CNC control, laser type: fiber laser, laser power: 8,000 W, year of last overhaul: 2025, Equipment: CE marking, cooling unit, dust extraction, emergency stop, nozzle changer, safety light barrier, TruLaser 5030 fiber (L56) Standard equipment: Machine: - Working range: 3000 x 1500 mm - Enclosed frame with integrated cabinet - Automatic longitudinal pallet changer - Axis drive via linear motor technology and Torque motor - Laser beam transmission via fiber optics - Machine cooling unit (water-air) - Integrated electrical cabinets with internal lighting - Single electrical switch for machine and laser - Longitudinal chip conveyor - Work area lighting - Laser positioning diode - Oil misting device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and slinging device TRUMPF Laser: - Fiber optic cable according to standard installation layout (laser source next to the machine) - Laser cooling unit (air-water) - Laser excitation by long-life diode module - Laser power control Laser Cutting Head: - Universal cutting head with adaptive lens system - "One cutting head" strategy - Cutting head protection window - Online monitoring of protection window - ControlLine Numerical Control: - Sinumerik 840D SL CNC - Integrated technology data (Laser table) - 19" color touchscreen - Automatic shutdown - Programmable cutting gas pressure - FastLine - FlyLine - AdjustLine - Remote service via internet - Simple workshop programming - Rapid reproduction - Copper cutting package (includes N2 and O2 cutting data) - Brass cutting package (includes N2 cutting data) - Microweld - Multi-sheet processing - Condition Guide Data Transmission: - USB interface - RJ-45 network card - Central link Safety: - CE certifications - Optical safety barriers - Compartmentalized extraction device - Compact dust collector - Machine housing with certified protective windows (right-hand door) - Electric sliding roof Services: - Commissioning - Machine network configuration via remote service Option: Knedpfx Ajxqyvqsg Aed TruDisk 5001 solid-state laser (5kW) with one fiber output DetectLine (accurate sheet positioning) Right-hand machine installation Interface for LiftMaster Compact

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 12,024 h, machine/vehicle number: A0240A0643, sheet thickness (max.): 20 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS Working area X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum cutting thickness: 20 mm Maximum workpiece weight: 1,700 kg Speed Simultaneous: 140 m/min Control: Siemens Sinumerik 840D SL Accuracy Position deviation Pa: 0.05 mm Mean positional scatter Psmax: 0.03 mm Laser: TruFlow 4,000 MACHINE DETAILS Connected load: 4,000 W Dimensions & Weight Kedpfx Aexgqv Hog Aend Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Weight: 13,000 kg EQUIPMENT Separate control unit and cooling Trumpf LoadMaster Exhaust system Trumpf/Handte MF-L40/8/1 (Max. extraction capacity: 2,000 m³/h)

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Knedpfjxhfu Hjx Ag Aod Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: good (used), Year of construction: 2005, Trumpf Trulaser 3020, Year of manufacture 2005, Kedpov In U Tjfx Ag Ajnd Trumpf control, Travel path X/Y/Z 3000/1500/115 mm, All maintenance carried out by Trumpf / maintenance reports available, Laser power 3200 W, Beam on 26,500 hours, Cutting capacity steel max. 20 mm, 2 cutting heads, Pallet changer, 1 original laser table, 1 self-made table,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 13,060 h, actuation type: electric, controller manufacturer: TRUMPF, laser type: CO₂ laser, laser source manufacturer: TRUMPF Lasertechnik, laser source model: TruFlow 3200, laser hours: 1,360 h, laser power: 3,200 W, laser wavelength: 10,600 nm, input voltage: 400 V, type of input current: AC, shaft length: 10,600 mm, Equipment: CE marking, cooling unit, documentation/manual, CO2 Laser TRUMPF Type TruFlow 3200 3200 Watt average output power Type: TruFlow 3200 Knsdpfxoxqm U Ts Ag Asd Year of manufacture: 2016 Beam on: 1,360 h (current) Laser on: 13,060 h (current) Includes the following: • Base unit TruFlow 3200 • Pilot laser • Lateral beam exit configuration (Y version) • Analog input: Laser power control • Digital (BCD) interface • Air-cooled chiller by Riedel (see nameplate) • Portable control panel, 20m cable • Fine adjustment • Base plate for customer-specific frame All information provided without guarantee. The laser is being sold due to business closure. The laser has been used for welding operations in a low-dust industrial hall and is therefore in good condition. The laser is still occasionally in use, so operating hours may increase slightly. The laser remains electrically connected and can be viewed in operation. Further details upon request or during an on-site inspection. On-site viewing available by appointment. Location: Gotha/Thuringia, near A4 motorway, Germany Price is net plus current VAT, without warranty and/or return, ex works, without packaging Disassembly, packaging, and transport to be handled by buyer; support can be provided.

Condition: excellent (used), Large flanging device Make Trumpf Type CS 20 CN 20 (28202) Ksdpju Nuycsfx Ag Aend suitable for Trumpf CS 20 and CN20 very good condition, very little used

Condition: good (used), Year of construction: 2006, machine/vehicle number: B0617A0014, Offer 25376 Technical Data: - Max. cutting width: 3050 mm - Max. cutting capacity at 45 Kp/mm²: 13 mm - Hydraulic cutting angle adjustment - Number of hold-downs: 13 pcs - Front angle gauge - 4 front support arms - Motor-driven, position-controlled backgauge: 10 - 1000 mm - Cutting line illumination - Rear area safety with side grids and light barrier - Electric foot switch - Drive: 400 V / 20 kW - Required floor space approx.: W 4350 x H 2100 x D 2200 mm - Weight approx.: 8.5 t Kjdpfx Asxp Hp Ueg Ajnd

Condition: excellent (used), Year of construction: 2008, A used TruLaser 3530 laser cutting system is for sale. Technical data: - Operating hours: beam on 2955 h/laser on 15464 h - X-travel 3000 mm (max. 3104) - Y-travel 1500 mm (max. 1580) - Xp-travel 300 mm (max. 305 mm) - Z-travel 114 mm - max. material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - max. positioning speed parallel to the axis 120 m/min - simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y-axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y-axis 15 m/sec. Standard equipment - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic XP axis - Automatic pallet changer - Closed beam guidance - NitroLine, high-pressure cutting - FocusLine, constant focus position - Compressed air cutting - PierceLine, reduction of the piercing process - PlasmaLine, plasma sensors - SprintLine, fast processing - LensLine - FlyLine - ContourLine, for producing small holes - Microweld - Spray device - Position laser diode - Programmable cutting gas pressure - Automatic switch-off - Work area lighting - TruTops Laser lite - CO2 laser TruFlow 3200 with high-frequency excitation, mirror telescope and maintenance-free turbo radial blower - Laser control TASC 3, logbook function and cooling unit - Laser cutting head with 5 and 7.5 lens and quick-change device - ControlLine, capacitive height control and process control - Sinumerik 840D control: Open control - Causes of error messages via diagnostic functions Extended machine equipment - Pallet changing system - Laser cutting heads 5" and 7.5" - Additional laser cutting head with 3.75" lens for high-speed cutting Knedpfsixl Tnex Ag Asd - Dimensions in mm: approx. 9300 x 4600 x 2000, weight in kg: approx. 11500 Year of manufacture: 2008 Special price €55,000 net Machine has been dismantled. Can be viewed by prior arrangement. If you are interested, please contact us

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Max. sheet thickness: 6 mm Knodsxhfnaspfx Ag Asd MACHINE DETAILS Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg

Condition: good (used), Year of construction: 2010, laser power: 4,000 W, Trumpf 5 axis laser machine, Year of manufacture 2010, Siemens control, travel X/Y 4000/1500 mm, Knedpfx Asvbdy Esg Aod 1 burning head, laser power 4 KW, Laser On 47950 hours, beam on 6200 hours, ADC cutting head 155 mm, Positioning laser diode, Teach panel, power cycles, Trumpf remote connection, Machine weight approx. 19,000 kg,

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on: 24,314 h Kjdpfexfin Sex Ag Ajnd Laser on: 55,176 h

Condition: ready for operation (used), Year of construction: 2003, General Data Machine weight 24000 Main Drive Pressing force 3200 kN Bending length 4080 mm Additional Equipment Backgauge system: 5-axis backgauge system with control cabinet air conditioning Safety device: BendGuard safety device Foot switch This TRUMPF TrumaBend V320 press brake was manufactured in 2003. It features a press force of 3200 kN and a bending length of 4080 mm. Equipped with a 2D graphic control DA 69 on a Windows platform and a 10.4" color screen, it ensures precision and ease of use. The machine includes a sturdy all-steel frame and electro-hydraulic top drive. Contact us for more information about this machine. Application Types Bending Ksdpjxd H Srofx Ag Ajnd

Condition: ready for operation (used), Year of construction: 2000, control type: CNC control, working width: 3,100 mm, stroke length: 365 mm, type of crowning: CNC-controlled, power: 37 kW (50.31 HP), Hydraulic Press Brake Manufacturer: TRUMPF Model: TrumaBend V230 Year of manufacture: 2000 Technical Specifications Manufacturer: TRUMPF Model: TrumaBend V230 Year of manufacture: 2000 Press force: 230 t Bending length: 3060 mm Frame gap: 2690 mm Throat depth: 410 mm Worktable: 200 mm Installation height: 535 mm Stroke: 365 mm Connection Values Electrical: 37 kW Pneumatics: 6+1 bar Hydraulic oil capacity: 400 l Dimensions: approx. 3.75 x 2.90 x 3.10 m (L x W x H) Weight: approx. 18.2 t Equipment • 2D graphic control Delem DA-65W • Controlled axes: X, R, Z1, Z2, Y1, Y2 • Hydraulic tool clamping top and bottom • WILA tool adapter • CNC-controlled crowning • Pneumatic die shifting • 2 support arms, laterally adjustable Kodjxdkzwepfx Ag Ajnd All information given without guarantee. A powered demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2001, operating hours: 13,030 h, machine/vehicle number: 090038, punching force: 2,200 t, We are offering our Trumatic 5000R laser punch press for sale. The machine is used and in very good condition. Knodpsunh D Djfx Ag Asd Basic data from the type plate: Max cutting force: 220 kN Type 9121 No. 090038 Year of manufacture: 2001, spare parts Network: 400 V/50 Hz Connected load: 29kVA Supply voltage: 400V Control voltage: 24V= Necessary protection: 3x50A Compressed air connection: 7-14 bar Machine weight: 17500kg Main features of the machine: - Tool rail - 21 tools and 4 handles - working area 3070x1660mm - max. sheet thickness 8mm - Rotation axis of the tool head C1 and C2 - Forming function - Thread function - Multibend function - Pneumatic press - automatic sliding of the details 500x500mm - water-cooled servomotors Additional equipment of the machine: - light barrier Softpunch function - Details slide sensor - Device for blowing out small details - System for chip extraction - Separate lubrication of punching and threading tools Number of NC units: 13030h We sell machines without tools. Machine regularly maintained by authorized Trumpf service with original spare parts, last machine maintenance on 21.02.2024r.

Condition: used, Year of construction: 2002, Working area 3000x1500 mm Max. punching force 220 kN Max. sheet thickness 6 mm Dimensions 7500 x 7500 x 2500 mm Knedpfx Agexfh Tyo Asd Machine weight approx. 17,500 kg

Condition: excellent (used), Year of construction: 1997, pressure 170 t chamfer lenght 4080 mm distance between columns 3680 mm column arm 410 mm dayligth 385 mm stroke 215 mm ajustment speed 200 mm/sec working feed 1-10 mm/sec return speed 135 mm/sec table width 200 mm table height 1050 mm Number of working hours 25.430 h oil volume 350 l total power requirement 29 KVA weight of the machine ca. 16.450 kg. range L-W-H 4620 x 2210 x 2885 mm Machine in good condition Regularly serviced by the manufacturer CNC backgauge with 8 axes (!!) - in checked conditions - machinevideo - ?v=yEaRj0XJAC4 Equipment: - CNC electro-hydraulic press brake/die bending press - DELEM CNC control - swiveling front left * High-resolution graphic screen * Clear, concise menus in the operator's language * Large tool and product library * Graphic 2D programming Knjdpfexcp Rbjx Ag Aod * Automatic bend sequence calculation and collision detection * Emergency stop button at front - CNC axis adjustment: * Y1 - Y2 - X1 - X2 - R1 - R2 - Z1 - Z2 axis + CNC crowning - X axis - adjustment speed: 500 mm/sec. * Max. stop range: 860 mm - R axis - Adjustment speed: 300 mm/sec. * Max. travel: 250 mm - Z axis - Adjustment speed: 1000 mm/sec. * Max. travel: 3260 mm - CNC electric motor table crowning - CNC electro-pneumatic die shift (I axis) - WILA / TRUMPF upper tool clamping - hydraulic - WILA / TRUMPF lower tool clamping - hydraulic - 2x front, robust support arms - movable - 1x freely movable 2-hand/foot control - 1x freely movable foot switch - Side safety device (swivel doors) - Rear safety device (sliding doors) - Original operating instructions

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 26,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, cutting speed: 300,000 mm/min, workpiece weight (max.): 1,800 kg, TECHNICAL DETAILS Travel ranges X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 115 mm Maximum workpiece weight: 900 kg Laser: TruDisk 5001 Maximum power: 5,000 W Wavelength: 1.03 µm Maximum sheet thickness Mild steel: 25 mm Stainless steel: 20/25 mm Aluminum: 20/25 mm Copper: 10 mm Brass: 10 mm Speed Simultaneous: 265 m/min Accuracy Positioning deviation Pa: 0.05 mm Maximum mean positioning deviation Ps: 0.03 mm MACHINE DETAILS Control unit: Siemens Sinumerik 840D SL Dimensions & Weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg Power consumption Total system: 7–39 kW Resonator: 5 kW fiber Ksdpexd Afhjfx Ag Ajnd Beam on hours: 26,000 h Operating hours: 68,000 h

Year of construction: 2004, condition: ready for operation (used), Additional Equipment Standard Equipment: Sturdy machine frame with welded, all-steel construction / Pressure beam with high bending strength / Electro-hydraulic top drive via proportional valves / Modern block hydraulics / Modufix upper tool holder system, manual and hardened / Lower tool holder for EV dies, manual clamping, programmable displacement / Safety device / CNC crowning / Prepared for BendMaster / Machine Equipment Upgrades: Increase in installation height and stroke by 150 mm each / Backgauge system with 6 axes and control cabinet air conditioning / Hydraulic and hardened upper tool clamping / Hydraulic lower tool clamping / Further Options: Prepared for ACB® / 3D control system with color display / Network / 6-axis sensor system / BendMaster (Standard Equipment): Sturdy base body with welded, steel construction / Lightweight handling arm in cast aluminum construction / Low floor travel, running to the right (travel 2750 mm) / Sheet metal sensor integrated in the C-axis arm / Rotary feedthrough for cable harnesses in the D-axis / Prepared for automatic gripper change / Sensor system for 4 axes backgauge / Vacuum generation / Safety fence with safety device and 3 sliding doors / Control system: Operator terminal with additional external I-PC / BendMaster Extension: Extended floor travel (travel 2000 mm) This TRUMPF Trumabend V130 press brake was manufactured in 2004. It features a sturdy all-steel frame, electro-hydraulic top drive, and a 6-axis backgauge system. Equipped with a CNC crowning and a 3D control system with a color display, it ensures precision and ease of use. Consider the opportunity to buy this TRUMPF Trumabend V130 press brake. Contact us for more information about this machine. Knjdpfxsxd H Uto Ag Ajd Application Types Bending

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4000 mm Y-AXIS TRAVEL: 2000 mm Z-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 245 m/min Kedpfsxqtx Sex Ag Ajnd WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM

Condition: used, Technical details: plate thickness: 10 mm material thickness: 4,5 - 10 mm capacity in W: 2000 Watt voltage: 220 mit 4 Meter-Kabel V machine weight approx.: 18 kg dimensions of machine: L: 550 x B: 120 x H: 260 mm Knjdju Ngfqopfx Ag Aod WELDING EDGE SHAPER - GRINDING MACHINE or PLATE SHAPER Hand tool Application: cutting and notching of plate-shaped workpieces Material thickness depends on material (max. 10mm) Tool = lower knife (die) and upper knife punch) optional with accessories As in the picture, for 200,00 Euro *

Condition: used, Year of construction: 2001, Technical details: tube diameter: 74 mm wall strength: 5 mm tube diameter min.: 10 mm tube diameter max.: 74 mm round material: Stahl max: 40 mm control: Trumpf-Rohrtechnik IsoBend 2.0 bending radius max.: max: 300 / min: 65 mm bending angle max.: max: 195 / min: 0,1 ° bending speed: (°/s): 90 / (°/s²): 190 °/s tube pipe draw up length: 3000 mm work pressure of hydraulic: Betriebsdruck max: 300 bar total power requirement: 43 kVA weight of the machine ca.: 8,5 t dimension machine xH: 6,5 x 1,6 x 1,6 m dimension control panel: 0,8 x 0,6 x 1,4 m It is a multi radius bending machine with bending head and swivel arm. (Cold bending machine) Kjdpfx Ageu Ibvho Asnd Possible applications: only for processing pipes, round steels and wires made of steel, stainless steel and non-ferrous metals. Due to the cross slide of the bending head, the following advantages can be listed: -free programmable X and Y axes -level change cross slide: tical travel = 300mm (vert. position freely programmable) and max. horizontal movement 350mm -Bending forms of different sizes within a stack of bending forms can be approached as required. The bending direction is to the right. Control software Trumpf-Rohrtechnik IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Slide rail (speed max. 362mm/sec. and acceleration max. 1100 mm/sec.) i.D. *