Used Trumpf Trubend 5170 for sale (411)

Condition: good (used), functionality: fully functional, Year of construction: 1998, operating hours: 31,792 h, Hydraulic Press Brake Manufacturer: TRUMPF Model: TrumaBend V320 Year of Manufacture: 1998 Technical Details Manufacturer: TRUMPF Model: TrumaBend V320 Year: 1998 Operating hours: 31,792 h (read-off value) Pressing force: 320 t Bending length: 4,080 mm Distance between uprights: 3,680 mm Throat depth: 410 mm Lajdpfx Ajx Ar T Esgzek Approach speed: 150 mm/sec Return speed: 135 mm/sec Bending speed: 10 mm/sec Stroke: 365 mm Installation height: 535 mm Space requirement: approx. 4.65 x 2.31 x 3.1 m Weight: 24.5 t Equipment: • 2D graphic control Delem DA • Pneumatic die shifting • 2 movable support arms • Hydraulic tool clamping, top and bottom • CNC-controlled crowning • Controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 • Upper tool OW 202/S, 28°/R1, H 220 mm, L = 4,000 mm, segmented • Lower tool EV006-W20, 30°/R2, H 100 mm, L = 4,000 mm, segmented All information subject to verification. A demonstration is possible at any time in our showroom.

Year of construction: 2013, operating hours: 7,166 h, condition: like new (used), functionality: fully functional, TruMark Station 5000, with roll-off device for diameter marking, as good as new, hardly used. Table size 680x700 mm Working height 1050 mm Control TRU TOPS Mark Laedpfxofxq Dus Agzek Max. tool height 500mm max. workpiece weight 50 kg Space requirement approx. 1.8 x 1.4 x 2.0 m Weight 580 kg Connected load 1,8 kW TruMark Station 5000 X Y axis Protection filter 200x100 mm Laser TruMark 5040 with ytterbium fiber laser as laser beam source 1062mm +-3 mm Control computer with Windwos 7 Pilot laser TruMark Series 5000 Vavigator

Condition: used, Year of construction: 2000, CNC press brake Manufacturer: Trumpf Model: Truma Bend V170 Laedpfjx Di Hxex Agzjk Year of manufacture: 2000 CNC control: Delem Press force: 170 t Working width: 4 m Crowning Backgauge 6 axes Hydraulic tool clamping Height: 2.9 m Without tools 161225

Condition: used, Year of construction: 2012, table length 3000 mm table width 1500 mm burner heads 1 Control Trumpf total power requirement 73 kW Laser cutting machine Trumpf TruLaser 3030 Lean Edition Laser power 3200W Type L 20 Year of construction 2012 Net 400V/50Hz Total power requirement 73 kVA Control voltage 24V Fuse 3 x 125 A Air connection 7-10 bar Nitrogen connection 30 bar Oxygen connection 20 bar Beam one hour 7755 Laser one hour 25263 Machine is in very good condition Ljdpfsr Er Rbsx Agzjak and optimized by Trumpf in 12/2022. Documentation: Completely available

Condition: new, Year of construction: 2025, laser source manufacturer: TRUMPF, laser power: 6,000 W, Equipment: CE marking, TruLaser 1030 Lean Edition Offer Laedpfoxn Irbsx Agzsk Cost-Effective Swiss-Made Machine Efficient and Powerful Laser Cutting When it comes to laser cutting, value for money counts: the sturdy machines of the TruLaser Series 1000 Lean Edition perform their tasks efficiently and economically. With their relatively low investment cost, they are profitable even at low utilization rates. With 6 kW of power, they cut all materials up to 25 mm thickness and deliver top-quality results. Get started immediately: the machines are intuitive to operate, and cutting data is already integrated. Wide Range of Materials and Features Mild steel, stainless steel, aluminum, copper, brass, and FlyLine Technologies and processes for maximum process reliability and durability Collision protection, nanojoints Easy Operation Pre-qualified cutting data, cutting guide, online lens monitoring, multi-sheet processing, fully automatic pallet changer Including: - TruLaser 1000 Lean Edition - Fully automated pallet changer and 6 kW laser - Programming software - Training & Services: * E-learning package for programming software * Operator training for software * Operator training for the machine TRUMPF Quality Worldwide, our rapid remote service support addresses your needs quickly and reliably. For further technical details, please refer to the technical data sheet or visit our website. If you have any questions, don't hesitate to contact us. About TRUMPF: With 100 years of company history, we've helped shape thousands of sheet metal fabrication operations in Germany alone. We share this experience every day with our customers. Thanks to innovative machines and features, the most comprehensive service concept on the market, and our experts in software, automation, and smart factory solutions, we always provide tailored offers to meet your requirements. PS: We are also happy to support you with financing. TRUMPF Financial Services offers financing, leasing, and pay-per-use models to help you successfully overcome financial and business challenges.

Condition: used, Year of construction: 2012, TRUMPF TruLaser 5040 6kW Laser, manufactured in 2012 in Germany by TRUMPF Maschinen Grüsch AG. The machine has been continuously serviced, upgraded, and maintained throughout its entire operation period. The TRUMPF TruLaser 5040 (L18) laser cutting machine is designed for precise cutting of sheet metal made from materials such as steel, aluminum, copper, and brass. Laser cutting is performed using a stable 6 kW laser beam generated by a high-efficiency resonator. A range of additional systems streamline the machining process while enhancing cutting quality. The entire cutting process is fully automated, thanks to the automatic pallet changer system. This system enables simultaneous loading and unloading of workpieces during operation, thus increasing productivity and minimizing machine downtime. The TruLaser 5040 is offered with extensive equipment, including additional cutting heads and an advanced CNC controller with many useful features. Lasdpfxjx Nil Ij Agzjk In September 2022, the complete set of quartz tubes, all internal optics, and the lamp were replaced. The external optics were cleaned and calibrated in September 2025. Filters and oils were changed according to TRUMPF’s recommendations. Once a year, the water was changed along with flushing the CU and AL circuits. All these procedures are documented with proper service reports. Both original lenses for both heads and an optics case are supplied with the machine. Technical specifications of the TRUMPF TruLaser 5040 laser cutting machine: - Laser power: 6 kW - Travel (X/Y/Z axes): 4000/2000/115 mm - Maximum cutting thickness (mild steel): 25 mm - Maximum cutting thickness (stainless steel): 25 mm - Maximum cutting thickness (aluminum): 25 mm - Maximum cutting thickness (copper): 10 mm - Maximum cutting thickness (brass): 10 mm - Operating hours: 51,839 h - Machine on-time: 79,497 h - Compressed air connection: 7-10 bar - Nitrogen (N2) supply: 30 bar - Oxygen (O2) supply: 20 bar - Connected load: 120 kVA - Machine power supply: 400 V; 50 Hz TRUMPF Laser Cutter Equipment: - CNC control: TRUMPF - Laser source: TRUMPF TruFlow 6000 - BrightLine system (improves quality of thick sheet cutting) - FlyLine system (fast hole cutting in thin sheets without pre-piercing) - PierceLine system (monitors and controls piercing process, reducing duration by up to 80%) - 250 mm cutting head - 175 mm cutting head - Automatic pallet changer system - Cutting with compressed air, nitrogen or oxygen - Longitudinal conveyor belt

Year of construction: 1997, operating hours: 47,122 h, condition: ready for operation (used), Control Unit Ljdjx D Ec Aspfx Agzjak Model DA-65 Brand DELEM Additional Equipment Hydraulic clamping system This 6-axis TRUMPF Trumabend V170 press brake was manufactured in 1997. It features a bending force of 1700 kN and a maximum bending length of 4060 mm. The distance between uprights is 3680 mm, and it includes a hydraulic clamping system. Consider the opportunity to buy this TRUMPF Trumabend V170 press brake. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 41,657 h, controller model: SINUMERIK 840 D SL, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Laser power: 5,000 W MACHINE DETAILS Control: SINUMERIK 840 D SL Operating hours Total operating hours: 67,508 h Laser on hours: 41,657 h Current laser output (as of 27.04.2023): 5,335 W EQUIPMENT Torque drive in combination with linear direct drives Enclosed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with internal lighting Automatic pallet changer (longitudinal direction) 17" touch colour display Wide longitudinal conveyor belt TruDisk power supply via the machine Workspace illumination Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Solid-state laser TruDisk 3001 with 1 LLK output LLK according to standard layout Laser cooling unit (water-air) Excitation via pump diodes Laser power control Universal cutting unit with fully adaptive lens system Cutting head strategy Protective glass against lens contamination Condition monitoring of protective glass ControlLine: height control and sheet outer edge detection Simple shop programming Extended shop programming Fast re-production Integrated technology data Ljdpfex A Hagox Agzoak Automatic shut-off Programmable cutting gas / pressure selection FastLine FlyLine AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified viewing window, right-hand door Electric roller roof

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation Laodjx Aq Axspfx Agzsk - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 84,004 h, laser power: 3,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, Equipment: safety light barrier, Working range: X = 3000 mm / Y = 1300 mm / Z = 600 mm B = +/- 135° C = n x 360° Standard configuration: - Fixed pendant control panel - Teach panel - Teach software - TruDisk 3001 solid-state laser - Air cooler Cooling and pilot laser (switch) Lsdpfxorb Dg Ne Agzjak - LLK with 30 m - Prepared for laser cutting - Cutting gas: nitrogen - Dynamic cutting optics with f = 150 mm - Magnetic coupling - FocusLine - Control: Siemens Sinumerik 840 D (open control on PC basis) - Network card Special configuration: - MDE interface - FastLine Cell - ObserveLine - Rotation changer D = 4000 mm incl. rear step protection - Scrap conveyor belt - 4 x configurable control interface - Valve terminal for 8 pneumatic clamps per side - 2 x loading status light for rotation changer - 3 x horizontal pre-crushing interface - Protective cabin for rotation changer incl. light curtain, protective grille and signal light - Status lights below and above - Video surveillance with camera and monitor holder - incl. extraction system

Condition: ready for operation (used), Trumpf TruPunch 3000 Stanzmachine, Punching Machine, 1st owner Ljdsx I Iwgepfx Agzeak

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A0045A0406, sheet thickness (max.): 6 mm, total length: 2,000 mm, A TruPunch 1000 in mint condition. Can be seen running in our building in Bruges. The machine has the following options: MultiTool, Threadcutting, Detection of sheet Laodsx Hi Evspfx Agzsk

Condition: ready for operation (used), Year of construction: 2012, punching force: 18 t, total height: 2,252 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, General Data Ledpfx Ajx D Dkljgzeak Measurements height 2252 mm Control Unit Brand BOSCH Model MTX CMP70 Dimensions Machine Length 6500 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1250 mm Main Drive Punching force 180 Kn Maximum sheet thickness 6.4 mm This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. Application Types Punching

Year of construction: 2006, condition: used, machine/vehicle number: 21201, max. working width: 3,550 mm, pressing force: 3,000 kN, machine weight: 19,100 kg, drive power: 29.5 kW, with various bending tools, 1 workbench approx. 200x70 cm, 6-way/2-door Ljdpex Akmkofx Agzjak

Condition: good (used), functionality: fully functional, Year of construction: 2011, laser power: 5,000 W, CNC Laser Cutting System TruLaser 5030 (L16) 5000 Watt X Working Area max.: 3000 mm Y Working Area max.: 1500 mm Z Working Area max.: 115 mm Control: Siemens Sinumerik 840D SL Laser Power: 5000 Watts Operating hours: 56,521 h Laser on time: 23,563 h Sheet thickness St. max.: 25 mm Sheet thickness Va. max.: 20 mm Sheet thickness Al. max.: 12 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit KKW Riedel from 2003 - TFT color display - Longitudinal conveyor for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 laser TruFlow 5000 - Maintenance-free turbo radial blower - Cutting head with 250mm lens - Universal quick-change unit (UTI) with bus connection Laedsx Ap Sfepfx Agzok - ControlLine: Height control and sheet edge detection - SINUMERIK 840D - Automatic shutoff - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE marking - Light barriers - Multi-chamber extraction system - Compact dedusting unit - High-speed cutting head 175mm focal length

Condition: refurbished (used), functionality: fully functional, Year of construction: 2012, control type: CNC control, CO2 Laser Cutting System Manufacturer: TRUMPF Model: 3030 Lean Edition Ledpfx Aox H Abwegzoak Year of manufacture: 2012 / overhauled in 2023 Laser operating hours: 23,295 hours Working hours: 7,181 hours Working area: 3000 x 1500 x 115 mm Power: 3,200 watts Control: Siemens 840 D SL Sheet thickness (steel): 20 mm Sheet thickness (stainless steel): 12 mm Max. speeds: 140 m/min Accuracy: 0.1 mm Length: 6,500 mm Width: 7,600 mm Height: 2,200 mm Weight: 12,000 kg

Year of construction: 2011, condition: excellent (used), PLANT WILL BE AVAILABLE FROM AUGUST AND HAVE TO LEAVE THE PRODUCTION! - Filter for dust extraction has been renewed in February 2023 - Hoses for coolant circle has been exchanged for 3 year ago - Next maintenance is scheduled in May 2023 Brand: Trumpf Type: TruLaser 3030 Year of construction: 2011 Laser: TruFlow 5000 (5 kW cutting power) Controller: Trumpf based on Siemens 840D SL Counting hours machine ON: ca. 40.257 h Beam ON: ca. 17.157 h Working area: X- axis 3.000 mm Y- axis 1.500 mm Lsdpfxsmmbwie Agzsak Z- axis 115 mm Sheet thickness max.: - Structural steel (O2) 20 mm - Stainless steel (N2) 15 mm - Aluminium (N2) 10 mm Electrical supply: 400V/3Ph/50Hz 105 kVA / 160 A Measuring & Weight: - Length 9.300 mm at length installation and 6.500 mm if cross installed - Width 4.600 mm at length installation and 7.600 mm if cross installed - Height 2.200 mm - Weight approx. 12.000 kg Equipment: - 2 x laser cutting heads 250 mm - Automatically nozzle changer - Technical documentation Machine has been anual checked and maintained by Trumpf service An inspection under power is by arrangement possible Prior sale and technical mistakes reserved Request more information

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, machine/vehicle number: S2321M0007, laser power: 400 W, This TruLaser Cell 3000 is used to cut parts out of coil, in thin sheet-thicknesses. It has an automatic feed of the material in the lasercel. The machine is visible in production. Lasdpjx Hiy Hjfx Agzok

Year of construction: 1998, condition: ready for operation (used), General Data Machine weight 8600 kg Ljdpfxex D N Sue Agzsak Control Unit Model Delem 65 CNC control Main Drive Bending length 2550 mm Additional Equipment Extended Installation Height and Stroke: Additional 150 mm each 2nd Foot Switch This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2001, Main Drive Number of axis 5 Additional Equipment Top drive concept in two-cylinder design y1/y2 Lodjx D Nkdjpfx Agzoak Electro-hydraulic ram drive with proportional valve technology Ram travel measuring system with spring deflection compensation via glass scales Modern block hydraulics Cnc backgauge system Safe finger adjustment from the front Self-centring, manual, hardened upper tool holder for vertical tool change Hardened, manual lower tool holder Programme-controlled lower tool displacement (i-axis) for 2 positions Modern protective cover This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2003, operating hours: 24,628 h, General Data Machine weight 17500 kg Laedpfx Asx D Htpogzok Control Unit Model WIN NT Brand TRUMPF Main Drive Punching force 220 kN Movement X-Axis Movement 3125 mm Y-Axis Movement 1650 mm This Trumpf Trumatic 5000 R Punching machine was made in 2003 and has 24628 production hours. It is equipped with a Trumpf WIN NT control unit. The machine has a punching force of 220 kN. Application Types Punching

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Main Drive Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Application Types Punching Ledpfxsx D Nwwo Agzjak

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, General Data Measurements width 2210 mm Measurements depth 5000 mm Measurements height 3100 mm Machine weight 18000 kg Lsdex D Ilyspfx Agzeak Control Unit Brand TRUMPF Main Drive Pressing force 1700 kN Bending length 4080 mm Stroke 365 mm Number of axis 8 This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Application Types Bending

Year of construction: 2011, operating hours: 18,595 h, condition: ready for operation (used), General Data Measurements width 4600 Measurements depth 9950 Measurements height 2400 Machine weight 12000 Control Unit Brand SIEMENS Model Sinumerik 840 D Main Drive Spindle speed range 300 Lasdpjx D Sgzsfx Agzsk Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Max Material Thickness Steel 20 mm Stainless steel 15 mm Aluminium 15 mm Additional Equipment Closed machine frame with an integrated laser unit Torque drive combined with direct linear drives Enclosed beam delivery via fiber optic cable Water-air chiller for machine cooling Integrated electrical cabinets with internal lighting Automatic pallet changer (lengthwise installation) Power supply through TruDisk integrated into the machine Working area lighting Wide longitudinal conveyor Positioning laser diode This TRUMPF Trulaser 5030 Fiber was manufactured in 2011. A robust fiber laser cutting machine, it features a 3000 Watt laser output and a working area of 3000 x 1500 x 115 mm. Capable of cutting up to 20 mm steel, 15 mm stainless steel, and 15 mm aluminum, it operates with a Siemens Sinumerik 840 D control system. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 Fiber machine we have for sale. Contact us for more information. Application Types Cutting

Year of construction: 2006, condition: ready for operation (used), This TRUMPF TRUMATIC L3030 was manufactured in 2006. It features a 2700 kW CO2 laser and Siemens CNC control, handling board sizes up to 3000x1500 mm. Consider the opportunity to buy this TRUMPF TRUMATIC L3030 CO2 laser cutting machine. Contact us for more information. Application Types Cutting Lajdpfx Ajx D Sivogzok