Used Turret Punch for sale (3,244)

Condition: excellent (used), Trumpf We offer a laser and punching machine here. Technical specifications: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser power: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN active back-up): 220 kN Active back-up (programmable in steps): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: Punching operation: 35 mm Laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous stroke sequence: Punching: 900 strokes/min Marking: 2800 strokes/min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on the linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Dodpfozd Ulaox Ab Njwc Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average positioning spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Dedpozil Dkjfx Ab Njwc Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 pieces Tool change time: 1.5 - 6.5 sec Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes including tool cabinet with tools including Quick-Set

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: 36817, Vulcan 24" OD × 20" Sonic Loop Turret Coiler Winder with Automatic Cut & Transfer – BRAND NEW The Sonic Loop Turret Coiler is a two-spindle turret-type winding system designed for continuous, virtually tensionless coiling of extruded profiles. The extrudate is fed to the coiler through an ultrasonic sensing dancer system, which monitors the position of the extrudate loop and automatically adjusts the speed of the servo-driven winding spindles. This provides smooth, controlled winding while minimizing tension on the extruded product. Djdpfezz N Evjx Ab Newc The unit is equipped with an automatic cut-and-transfer system, allowing the product to be rapidly transferred from the full reel to a new empty reel without interrupting the coiling process. Technical Specifications Winder Type: Two-spindle turret coiler Maximum Reel OD: 24" Reel Width: 20" Centerline Height: 42" Line Speed: Up to 200 FPM on 8" diameter core Drive: Servo-driven spindles Loop Control: Ultrasonic sensing dancer Cut & Transfer: Automatic Electrical Supply: 380 VAC, 50/60 Hz, 3-phase Condition: Brand New / Never Used The equipment was manufactured and underwent final assembly/testing at the Vulcan facility before shipment. It has never been placed into production and is currently stored and ready for shipment. Original documentation is available where applicable. Available for immediate sale. Inspection and shipping arrangements can be coordinated with the buyer.

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. These are two single-station forming systems from the premium manufacturer FRIMO. They were used in the automotive sector and were in production until recently. The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. Dwedpfx Aszrg I Aob Noc These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a high-performance DIMECO LINAPUNCH MC-F CNC coil punching system for the automated processing of strip material directly from the coil. This system is particularly suitable for the economical production of perforated sheets, mounting plates, fastening rails, ventilation components, and customer-specific punched parts in medium to large quantities. Direct processing from the coil significantly reduces material consumption, setup times, and per-piece costs. The LINAPUNCH technology combines the flexibility of a CNC punching machine with the productivity of a continuous coil line. The system operates with standardized thick-turret tools and enables highly productive manufacturing processes. Technical data: Manufacturer: DIMECO Type: LINAPUNCH MC-F Machine type: CNC coil punching system / punching line Dodpfszmv Dvjx Ab Njwc Control: CNC, Siemens Simostar 370 Coil processing: Coil inner diameter: 508/610 mm Coil outer diameter max.: 1700 mm Coil weight max.: 6000 kg Strip width min./max.: 170 to 525 mm Material thickness: 0.4 to 3 mm Product length max.: 6000 mm Feed length programmable Servo-controlled NC strip feed Automatic strip guidance Punching technology: Punching force: approx. 20 t Multi-axis punching system (X/Y axis) Programmable punching stroke Auto-index function Multi-index function Tool holder for standard thick-turret tools Number of punches: 26 pieces Number of punching heads: 1 piece Number of revolving tool stations: 2 Consisting of: Coil unwinder Leveling unit NC feed LINAPUNCH MC-F punching head Shear Ink marking unit Drop table stacker 2 lifting tables Control panel with CNC control Safety enclosure Application areas: Electrical industry Switchgear construction Ventilation and air conditioning technology Metalworking Profile and component manufacturing Series production from coil material EXW, assistance can be provided with dismantling and loading.

Year of construction: 2026, condition: new, Punching knives eroded from solid steel Our punching knives are manufactured from selected steels and are available in a wide range of geometries and standards of all types such as ISO, DIN, JIS, ASTM, IEC. They are characterized by: - competent steel selection - material specific cutting geometry - optional equipment with various specimen ejectors and clamping spigots - individual production in different heights possible Dwsdpfokkhkusx Ab Njc - also possible as multicutter - long tool life - excellent cutting finish - optimal cutting results - suitable for every type of press e.g. manual toggle presses, pneumatic and hydropneumatic presses

Condition: good (used), Year of construction: 1990, machine/vehicle number: X0006, Offer 25364 Technical Data: - Punching force: 200 kN - Max. sheet thickness: 6 mm - Max. punching diameter: 90 mm Dwodpfx Ajx I Nc Rjb Nsc - Stroke: 42 mm - Throat depth: 400 mm - Maximum strokes per minute: 200 spm - Installation height: mm - Drive: 400 V / 3 kW - Required space approx.: W 1000 x H 1650 x D 1200 mm - Weight approx.: 1400 kg - Including: positioning table, quick-change punch device, foot switch, emergency stop switch, various punches and dies The machine can be inspected by appointment at the 63322 Rödermark site. Company Erich Mieth: Tel. 06074-90877 Monday - Friday: 9:00 am - 12:00 pm and 2:00 pm - 5:00 pm The price includes 19% VAT. You will receive an invoice with VAT shown separately. Sale to commercial customers only. Payment by bank transfer before collection of the machine.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Single-column vertical turning lathe | Dörries VCE 1400 The machine was overhauled in 2010 by Hering, has recently been cleaned, and is in good condition. Dwedpfx Aboyft Nns Noc - Table diameter: 1,000 mm - Swing diameter: 1,400 mm - Turning height: 1,100 mm - Siemens CNC control type 840 D Shop Turn - Tool changer - X-axis travel: 2,000 mm - Z-axis travel: 700 mm - Slide adjustment: 1,000 mm - Rapid traverse: 6,000 mm/min - Spindle speed: 500 rpm - Handwheel - Total power requirement: 62 kW Inspection possible at any time by appointment. #Tags: Doerries | VCE1400 | Dörries VCE

Condition: good (used), Manufacturer: LVD STRIPPIT Type: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Under power inspection possible Large package tooling WILSON Auto indexing rotation tools included Laser safety guids included Specifications Metric US standard Table load 150 Dwjdjv Ic Tqjpfx Ab Njc Working area X axis 2500 mm Working area Y axis 1250 mm Working area X axis with takeover 5000 mm Punching force 20 T Max. sheet thickness 6 mm Turret positions 30 Auto index. positions 4 Positioning speed X and Y axis 4500 mm/min. Turret change speed 900 rpm Dimensions (estimate) Length 6400 mm Width 5600 mm Height 2445 mm Weight 16500 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3 h, functionality: fully functional, pressing force: 20 t, working width: 1,250 mm, travel distance Y-axis: 1,270 mm, sheet thickness (max.): 6 mm, working length: 1,250 mm, No minimum price – guaranteed sale to the highest bidder! Machine from a training workshop with only 3 hours of punching time! Submission of a bid obligates timely collection by 21/11/2025! TECHNICAL DETAILS Pressing force: 200 kN Maximum sheet thickness: 6 mm Turret stations: 51 Auto-index stations: 4 Y-axis travel: 1,270 mm Working area: 1,250 x 1,250 mm MACHINE DETAILS Control system: AMNC-F Weight: 12,500 kg Electrical data Full load current: 55 A Short-circuit current: 25 kA Power consumption: 19 kVA Nominal voltage: 200 V Frequency: 50 Hz Operating hours Punching time: 3 h Power-on time: 895 h EQUIPMENT Solution Pack Blank School offline software AP100 2D CAD Dwjdpsxn Rvisfx Ab Njc Production Designer 3D VPSS3i Blank Tooling package valued at EUR 8,000

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 070804, punching force: 16 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,070 mm, travel distance Y-axis: 1,280 mm, punching diameter: 76 mm, TECHNICAL DETAILS Punching force: 165 kN Working area: 2,070 x 1,280 mm Sheet thickness: 6.4 mm Workpiece weight: 150 kg Punch diameter: 76.2 mm Dwedpfx Aszapqdjb Noc X-axis speed: 80 m/min Y-axis speed: 55 m/min Control system: CC 220 MACHINE DETAILS Machine weight: approx. 8,000 kg

Condition: good (used), functionality: fully functional, Amada LC 2012 C1 NT / Punch-Laser Machine, Year of manufacture 2012, Control system: AMNG - Fanuc Series, Punching force: 200 kN, Punching area: 2,500 x 1,270 mm, Dwedpjzp D H Djfx Ab Njc Laser power: 2,500 W, Laser cutting area: 2,000 x 1,270 mm, Z-axis travel: 100 mm, Max. table load: 150 kg, Revolver turret: 46 stations.

Condition: good (used), Offer 80216 Dwjdpfx Aozrvmnsb Njc Technical data: - Various pass-through openings, round and square - Length approx. 450 mm - Width approx. 450 mm - Plate thickness approx. 120 mm - Table height with base frame 720 mm - Space requirement: W 500 x D 500 x H 720 mm - Weight approx. 120 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Pressing force: 220 kN Sheet metal thickness - max.: 6.4 mm Punch diameter: 76.2 mm Travel range X-axis: 2,500 mm Travel range Y-axis: 1,250 mm Djdezk A Ntepfx Ab Newc Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed Simulation: 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions: 6,400 x 5,800 x 2,100 mm Machine weight approx.: 11,050 kg Operating hours: 30,430 h

Condition: used, Surfacing and jig boring machine LIZUAN • Maximum diameter: 80 mm • Minimum diameter: 10 mm • Maximum lenght: 1.000 mm • Minimum lenght : 70 mm Dwodpfx Ajzcpqijb Nsc

Condition: used, Year of construction: 1970, Diameter of the table 3000 mm turning diameter Max. 5500 mm column travel 1000 mm table turning speeds 82 U/min table load max. 25 t turning height 2000 mm weight of the machine ca. 75 t Workpiece height 1850 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Dwsdpozhn Txofx Ab Nsc If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 12,100 h, Manufacturer TRUMPF Type TruMatic 1000 - 1600 Fiber (K07) Year 2018 X-axis travel 3000 mm Laser nominal power 3000 Watts Control system Bosch CML 45 Punching force 16.5 to Max. sheet thickness 6.4 mm Max. material weight 150 kg Standard configuration Machine ⦁ Box frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 stations for clamps and tools ⦁ Hydraulic clamps (3x) ⦁ Drives with maintenance-free AC motors ⦁ Follow-up device with programmable pressure foot ⦁ Foot switch for closing the clamps ⦁ Part separator chute, right ⦁ Part removal flap, left ⦁ Sensor for part removal flap ⦁ Work area lighting ⦁ FocusLine ⦁ SortMaster Compact (retrofit option) TRUMPF Laser ⦁ LLK according to standard layout (10m) ⦁ Laser power control ⦁ Laser log function ⦁ Enclosed beam guidance via laser light cable (LLK) ⦁ Separate power supply for the TruDisk Compact cutting unit ⦁ Solid-state laser compact cutting system ⦁ Protective glass ⦁ Collision protection ⦁ ControlLine Punching head ⦁ Delta drive ⦁ Rotatable single-station tool adapter ⦁ Programmable pressure foot position ⦁ Tool length compensation ⦁ Punch spray lubrication ⦁ Punch slug vacuum ⦁ Forming function ⦁ Punching stroke counter Control system ⦁ TRUMPF control system based on Rexroth IndraMotion MTX ⦁ Touch panel with TFT 19" color screen ⦁ Integrated technology data ⦁ Programmable cutting gas pressure ⦁ Interface for remote maintenance ⦁ Automatic shutdown with wake-up function Dedpfx Aszgfnqob Nswc ⦁ Program manager ⦁ Production plan Options: Copper cutting package Brass cutting package Compressed air cutting Outfeed of small parts Brush tables Multitool Sensor for part separator chute Sign function, quick beading Multibend Thread forming Deburring roll technology Sorting function for part separator chute Height-adjustable clamps

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, turning height: 2,200 mm, workpiece weight (max.): 18,000 kg, turning diameter: 3,300 mm, feed length Y-axis: 2,050 mm, faceplate diameter: 3,000 mm, spindle speed (max.): 112 rpm, power of the servo motor: 70,000 W, Table diameter: 3000 mm - Manual 4 Morse Turning diameter: 3300 mm Djdpfx Absznl Sfe Nowc Maximum permissible weight: 18 tons Maximum workpiece height: 2200 mm Number of rams: 1 Ram stroke: 1200 mm Vertical travel of the cross slide: 2050 mm Spindle motor power: 70 kW Spindle rotation speed: 0 - 112 RPM Number of speed ranges: 3 Tool changer: 14 positions USED MACHINE OVERHAULED IN 2016

Condition: excellent (used), functionality: fully functional, turning height: 1,800 mm, workpiece weight (max.): 12,000 kg, turning diameter: 2,500 mm, rotary table diameter: 2,000 mm, spindle speed (max.): 200 rpm, power of the servo motor: 55,000 W, CNC Fanuc 18i TB Turning diameter: 2500 mm Maximum turning height: 1800 mm X-axis travel: -200 to +2150 mm Ram travel: 1000 mm Ram section: 240 x 240 mm Spindle motor power: 55 kW Spindle rotation speed: 200 rpm Faceplate diameter: 2000 mm – 4 independent Morse tapers Maximum permissible weight: 12 tons Dwodpfx Abeznl Tpj Nec Number of speed ranges: 2 Tool changer: 12 positions Moving cross slide USED MACHINE

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 Dwsdpoyylqbefx Ab Njc LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Condition: used, functionality: fully functional, machine/vehicle number: 0167694409306, throat depth: 760 mm, Equipment: centralized greasing system, used Mubea stamping machine fully functional price negotiable Dwedjy Ticnopfx Ab Nsc

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: VP600 760 01, used Mubea VP 600/760 Dwodpfjy Tihwjx Ab Nec Price: VP

Condition: used, functionality: fully functional, machine/vehicle number: 1028789976479, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender Price negotiable Dodpfoy Tip Ijx Ab Njwc

Condition: used, functionality: fully functional, machine/vehicle number: 0171793397124, input voltage: 220 V, input frequency: 50 Hz, used Muhr & Bender HIW 550/510 Price negotiable Dwodpfx Aboy Tivue Nec

Condition: not inspected (used), Faceplate: 2500 mm Swinging diameter: 3200 mm Max. turning height under tool: 2500 mm Max. workpiece height under support: 2780 mm Max. workpiece weight: 25 tons Cross slide: 2000 mm Ram travel, vertical: 1600 mm Ram travel, horizontal: 1800 mm Ram cross-section: 250 x 300 mm Dwedjzdk A Uepfx Ab Nsc Smallest distance between two rams: 1150 mm Faceplate drive: 71 kW Faceplate speed: 125 rpm Milling drive motor: 18 kW Milling drive speed: 1600 rpm Milling drive torque: 710 Nm