Used Unwinder for sale (369)

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Bwedpju D Ariofx Afpeh Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: good (used), For sale is a winder plant with several modules Proprietor GEORG SAHM GMBH & CO. KG MACHINE FACTORY Number of modules 6 Types 5*Bitensor 910 E / 1* Sahm 410 E Sahm 410 E Winding speed Max. 350 m/min Winding width Max. 300 mm Drive Frequency controlled Frame 3-tier Bobbin diameter Max. 355 mm Yarn tension 100 to 1250 cN Laying system Electronic Bitensor 910 E Year of manufacture 2015 Unwinding speed 70 to 200 m/min Transverse length of unrolled packages Max. 300 mm Drive frequency controlled Frame 3-tier = 9 unwinding units Yarn tension 50 to 400 cN Weight of unrolled packages Max. 12 kg Tube inner diameter of unrolled packages 75 to 94 mm Package diameter of unrolled packages Max. 320 mm Prices plus VAT S2qax Viewing possible by appointment. Contact us, our team is happy to help you. Bwedpfx Afslz Snnopeh Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: used, Year of construction: 2014, efi Vutek GS 3250 LXpro LED Print width: 3.2 m Colors: 8C + White Resolution: 12pl-1000dpi Production speed: up to 224 m²/h Roll option: Bwodox R U Evjpfx Afpsh 2 tables efi Fiery server Optional: heavy-duty unwinder

Condition: new, Year of construction: 2025, functionality: fully functional, The (fish mask shape) mask machine offered here combines efficiency and safety features with an optimized fit. These product features are, among other things, thanks to the use of ultrasonic technology, an intuitive HMI with touch screen for easy and clear operation as well as an optimized and robust unrolling unit made of steel. Process steps at a glance: Feeding of the filter fleece via a web edge control system, as well as the nose wire, uniform welding of the mask with subsequent folding and separation of the base body. The next process step deals with the attachment of the earband using ultrasonic technology. Optionally, a camera inspection, stacking unit, and a tubular bag machine can be ordered separately. In detail: - Welded unwinding unit with a total of 4 manual tensioning shafts, magnetic powder brakes and web guide control system for feeding the filter fleece. - Nose wire is fed in by means of another unwinder. - The use of panes in combination with slim aluminum profiles allows a good insight into the production while at the same time providing full protection for the operator. - We are happy to offer you various printer systems on request to print the legally required information on your mask. - The use of ultrasonic technology and the use of durable materials such as titanium guarantee increased machine availability compared to conventional materials. - High precision through the use of servo-driven motors. - Uniform material feed and material guidance, as well as separation by means of a rotary cutter with lateral marking output. - High-resolution, user-friendly MHI's with touchscreen. - Mask body welding using ultrasonic technology with subsequent folding matrix and welding of the upper and lower surface. - Precise separation of the mask from the marking with the help of a rotary blade, with subsequent ejection of the mask and lateral ejection of the marking. - Subsequent ear band embossing by ultrasonic technology. - Optional: Camera inspection with good and bad detection - Optional: Subsequent output to a stacker. - Optional: Output to a flowpack station for individual mask sealing. Performance data & dimensions: - Power consumption: approx. 4-5 KW during operation - Power connection: 220 V/ 50 Hz - Quantities: 80 masks/min. - Compressed air: 7-10 bar - Weight: approx. 2.5 t - Dimensions: 8200x5000x1800 mm (LxWxH) - Mask dimensions closed (longest and widest point): 205 x 82 mm (+- 2mm) We would be happy to send you an individual, high-quality offer. For this we ask you to give us your company data in advance. Bwodpfx Ash Uuhcsfpsh

Condition: new, functionality: fully functional, machine/vehicle number: Flowpack, Year of construction: 2023, - short delivery time, less than 10 weeks! - Model name: Rotection PU flow-wrapping machine Features: Steel frame/stainless steel construction, Fixing of the unwinder by hand without compressed air, Automatic roller centering for precise application, Automatic stop for empty products (no product - no bag), Simple touchscreen operation via color symbols Continuous feeding of products via sensor control, pressure mark sensor included, safety covers 3-sided welded seam packaging (fin seam), longitudinal sealing on the underside of the bag, rotating transverse sealing system Bwodpfxsq Ikfmj Afpjh Can be combined with upstream and downstream machines, Customer-specific modifications / designs on request Additional options (on request and at extra cost): Thermal transfer printer, e.g. best-before date, print width up to 60 mm, stainless steel finish/lacquering, cooling applications for ice cream packaging, zig-zag knife, Euro hole punch etc., applications for shrink films (flow shrink), gas flushing units for protective atmosphere (extend product shelf life), automatic product feed systems, intermittent insertion systems, perforation units (tear strip) for easy opening, length-dependent product processing by photocell scanning Horizontal production orientation Conveyor system either chain conveyor or belt conveyor, length as required Film feed from below Flexible and fixed forming shoulder Operator display 10" touchscreen with memory functions, swivel arm for convenient operator handling Drives & control 8 servo motors and PLC control Packaging length 120-600 mm Packaging width 70-250 mm (depending on film width) Packaging height max. 80 mm (depending on forming shoulder) Speed 25-100 bags/min Film width 200-600 mm Consumption approx. 7 KW Power supply 220-240 V / 50 Hz / 1-phase Machine weight approx. 1000 kg Machine dimensions approx. 5230 x 1380 x 1460 mm System material 304 stainless steel Pressure mark sensor Yes External compressed air required Yes Printer holder at extra charge Delivery time Current delivery time less than 10 weeks

Condition: new, functionality: fully functional, machine/vehicle number: V1 01HUNG60KET9ESGRBMSZ601W, Year of construction: 2023, ! short delivery time, under 10 weeks ! !! We are happy to advise you !! Model name: Rotection Box-Motion U Production orientation ////: Horizontal Conveyor system ////: Chain conveyor belt, length as desired Film feed ////: from below Form shoulder ////: flexible and fixed Operator display ////: 10" touchscreen with memory functions, swiveling through extension arm for comfortable operator handling Drives & control ////: 9 servo motors and PLC control Packaging length ////: 200-600 mm Bwjdsq Ikgyepfx Afpoh Packaging width ////: max. 250 mm (depending on film width) Packaging height ////: max. 120 mm (depending on forming shoulder) Speed ////: 10-60 bags/min. Film width ////: max. 600 mm Consumption ////: approx. 9 KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 1500 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: 304 stainless steel Print mark sensor ////: Yes External compressed air required ////: Yes Printer holder ////: for an additional charge Delivery time ////: Current delivery time under 10 weeks Features: • Box motion end seal • Steel frame / stainless steel construction • Splice function, dependent on material and speed • Fixing of the unwinder by hand without compressed air • Automatic roll centering for precise application • Automatic stopping for empty products (no product - no bag) • Simple touchscreen operation using color symbols • Continuous feeding of products through sensor control • Print mark sensor included • Safety protective covers • 3-sided weld seam packaging (fin seam) • Longitudinal welding on the underside of the bag • rotating cross-welding system • can be combined with upstream and downstream machines • customer-specific changes / designs on request Additional options (on request and for an additional charge): • thermal transfer printer e.g. best-before date, print width up to 60mm • stainless steel finish / varnishing • cooling applications for ice cream packaging • zig-zag knife, euro hole stamp etc. • applications for shrink films (flow shrink) • gassing units for protective atmosphere (extend product shelf life) • automatic product feed systems, cyclical insertion systems • perforation units (tear thread) for easy opening • length-dependent product processing through photocell query

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic Bwodpfoi Exp Esx Afpeh -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Condition: good (used), Double reel, reel, unwind reel, motorized reel for sheet metal processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, sheet metal unwinder -Manufacturer: OBRU, height-adjustable reel with drive -Diameter/Width: adjustable, see photos Bsdpfjhfavujx Afpewh -Dimensions: 750/730/H1130 mm -Weight: 114 kg

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press Bwedpjpwnf Njfx Afpeh -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm -Weight: 312 kg

Condition: good (used), functionality: fully functional, Year of construction: 2010, operating hours: 14,500 h, Solid, fully functional Twinmaster 16X+ textile winder. Ideal for large print runs – thanks to automatic straightening and five unwinders, hydraulically regulated material braking guarantees even roll unwinding. The machine is regularly serviced, ready to work immediately. Bwjdpfownpd Iox Afpjh

Condition: good (used), Year of construction: 1999, Lg 33922 Unwind-straightener combination SOPREM BRH 7-200-80U-1250 BAP strip width max. 200 mm Coil weight max. 1,250 kg Spreading range approx. 380 to 430 mm Coil outer diameter max. 1,300 mm Bwedpfx Aohuwacofpjh Strip thickness approx. 0.8 to 3 mm Working direction from right to left

Condition: used, Year of construction: 1998, machine/vehicle number: 000373, Comm. no.: Lg 34723 Double decoiler LORENZ HH 2000.2 Used, in good condition year of construction 1998 - machine no. 000373 with - hydraulic spreading and automatic retensioning - belt center adjustment manually via spindle - counterholder with quick clamping - circular protection ring - easily exchangeable clamping cylinder (service-friendly) Bwodpfxsnbdyas Afpsh - manual swiveling - direction of rotation changeover (top-bottom unwinding) load capacity max. 2.000 kg/side strip width max. 300 mm Coil inner diameter approx. 360 to 420 Coil inner diameter approx. 460 to 520 mm Coil outer diameter max. 1,800 mm with drive via three-phase geared motor and pneu. brake. drive power approx. 2.2 KW/side Unwinding speed approx. max. 40 m/min. Coil limitation via fixed limiting ring at the rear and adjustable counterholder (with quick clamping) at the front. Coiler stand with base frame with lateral shifting for coil center positioning. Currently without electric control. Can be re-engineered and offered on request.

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 06 61 218, Comm. no.: Lg 32821 Single side decoiler BBT ABH 2000/400 exhibition machine, unused machine no.: 06 62 218 year of manufacture: 2021 Technical data load capacity approx. max. 2.000 kg strip width max. 400 mm Coil inner diameter approx. 450 to 520 mm Coil outer diameter max. 1,500 mm Unwinding speed approx. 2 to 15 min.-1 With adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Spreading of the support segments manually by means of hand crank via joints Number of supporting segments 3 Coil side guide via strong limiting arms, clampable. Reel stand in strong box construction as welded design. construction. Bsdpfx Asg U Utvjfpewh Additional equipment: Shutdown "belt loop too small" by antenna switch, attached to the column of the bottom housing of the loop control. Infinitely adjustable in height. Tape side guide at the bottom housing of the loop control, by means of lateral guide rods. The passage width is continuously adjustable.

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Bsdpemxkggefx Afpewh Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Year of construction: 2008, condition: like new (used), PRATI - VEGA PLUS LF330 CNT  Brand / model Prati / Vega Plus LF330 CNT (2008)  Type converting machinery  Year / SN 2008 / LF 020  HS Code 8441 1010 Description:  Slitter  Cutter  Rewinder with inspection and label checking.  Unwind with tension control and single edge guiding.  Pneumatic bars on the splice tables for changing rolls.  Color touch screen operation for all functions, programs and jobs.  For automatic non-stop rewinding (3-spindle turret) and cutting rolls (including 12 roll knives and a bar with 14 fixed knives) in register to smaller size rolls.  Waste suction removal.  During the process the labels can be counted (numbers and meters) and checked for quality and missing labels with a missing label system.  Size Min. / max. web width: up 150 - 330 mms  Min. / max. paper weight: 90 - 160 gsm  Roll diameter max. unwind: 1000 mms  Roll diameter max. rewind: 400 mms (280 mm when in use with the 3 shafts turret)  Shaft diameter unwind: 76 mms  Shafts diameter rewind: 12 with different sizes (3×25 mm, 3×40 mm, 3×45 mm, 3×76 mm) Bodpfx Afsqnvh Tepowh Speed: 0 - 200 m/min Electrics 400 V, 3 Ph, 28 kW, 50 Hz. Video link 2:

Condition: good (used), Year of construction: 1993, functionality: fully functional, SPECIFICATION Flexographic Printing Machine KDO, UK-made – 6 printing stations. - Web width for printing: 260 mm (10.5”) - Maximum unwinding diameter: 304 mm (12”) - Minimum unwinding diameter: 152 mm (6”) - Lateral adjustment: o 9 mm when the machine is stopped o 3 mm during machine operation - Unwinding: o Shaft diameter: 76.2 mm (3”) o Reel diameter: 450 to 500 mm - Rewinding – 2 stations, shaft diameter: 76.2 mm (3”) - Waste removal during die-cutting: Bsdpex S Hxqsfx Afpjwh o 2 stations, shaft diameter: 76 mm - Longitudinal slitting - Die-cutting device – 3 stations: 1. Label die-cutting station 2. Edge punching station 3. Cross perforation station - 3 cutting cylinders, 12” - Printing & inking stations – dual roller system: o Rubber roller o Anilox raster roller - Drying – each printing station equipped with a dryer, infrared lamp, and fan with adjustable drying power - Drive – electric motor 380/420 Volt - Power supply: 3 x 415V - One revolution: 12” (~30.5 cm) - Web guiding - Web activation station - Raster rollers: o 300/20 LPI – 3 pcs. o 450/14 LPI – 3 pcs. - Printing cylinders: o 12” – 6 pcs. o 11” – 6 pcs. - Ink trays – 6 pcs.

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 24, Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display Bwodpfxsn D E A Ts Afpoh

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Bwsdpfx Afen D Ew Iepeh Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: VP320C46009320240131V002, Max. media roller: 450 mm Max. media width: 320 mm Max. label roller: 310 mm max. label length: 1200 mm Max. media thicker: 0.3 mm Technical data Speed: max. 7.3 m/min Printing process: CMYK LED toner technology Print processor: 933 MHz, 2 GB, RAM 2G; HDD 40 G Warm-up time: under 28 seconds Interface: TCP/IP Web width: min. 210 mm, max. 330 mm Print width: max. 304 mm Print length: max. 1,200 mm Roll diameter: max. 450 mm (unwinding and rewinding) Roll weight: max. 47.2 kg (unwinding and rewinding) Printing material: 30 - 350 g/m² Resolution: 1200 x 2400 dpi Toner capacity: CMY: 18,500 pages A4 at 5% coverage K: 26,000 pages A4 at 5% coverage Fixing: 480,000 pages A4 Service life Dimensions: 1400 x 850 x 1600 mm Weight: 350 kg Bwedsvf Inbopfx Afpjh Ambient: Temperature 20°C - 24°C, relative humidity 45 – 55% Connection value: 220 – 240 V AC, 50 – 60 Hz, 3.8 KW

Condition: refurbished (used), Year of construction: 2013, We have multiple Mueller Apparatebau paper cutting systems available! Paper cutters fo pin feed available. We offer all machines after complete maintenance. We mostly have model 6612 but we also have a paper cutter system type 6611. Next to that we have a lot of other Mueller modules like unwinder, collating module and folding modules etc etc! Bodpfxjtwc Abe Afpswh Just let us know and we have the solution!

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 2,000 h, degree of automation: automatic, actuation type: electric, Horizontal Flow-Pack Packaging Machine – Complete Configuration • Complete horizontal Flow-Pack electronic packaging machine with rotary sealing jaws and top-mounted film reel holder, constructed with a painted steel frame (RAL 9007). • Cantilever construction: all mechanical transmissions located at the rear, fully separated from the product path. • Infeed conveyor belt, 2800 mm long, equipped with bridge and AISI 304 stainless steel side guides. • Pushers and pusher supports made from food-grade approved plastic material. • Hermetic longitudinal sealing system, achieved by three independent sets of rollers (Ø120 mm each): • First set: film pulling • Second set: sealing • Third set: guidance • Equipped with pre-heating system and cooling units. • Transversal sealing jaws, 300 mm wide, fitted with cutting knives. • Electronic torque limiter and low-pressure system on transversal sealing jaws. • Drive system with three Schneider Lexium 28 brushless motors: • One for infeed conveyor • One for longitudinal sealing rollers • One for transversal sealing jaws • Managed via 3 Schneider Lexium 28 digital inverters. • Automatic centering system for the film reel holder (600 mm opening), cantilever mounted on the upper section. • Outfeed conveyor belt, 1 meter long, with separate motor and inverter control. • Safety guards made from impact-resistant plexiglass, equipped with safety micro-switches. • 7” color touchscreen with memory and recall functions for: • Machine speed • Bag length • Temperature setting • Jaw deceleration • Pusher position for progressive product discharge • Accessory activation • Program memory: up to 99 recipes • Adjustable forming box • Machine operation: left to right • Pneumatic components: FESTO • Manufactured in accordance with CE standards Technical Specifications Bjdpfxsx Uy Ude Afpewh • Power supply: 400 V, 3-phase, T+N • Packaging speed: • 80 pcs/min for products 220 mm (L) × 70 mm (W) × 70 mm (H) • 10 – 120 packs/min (depending on pack length) • Package dimensions: • Length: 80 – 600 mm • Width: 10 – 290 mm • Height: up to 110 mm • Machine dimensions (L × W × H): 3800 × 1000 × 1900 mm • Weight: 600 kg • Installed power: 3 kW • Voltage/frequency: 400 V / 50 Hz / 3-phase Optional Equipment / Additional Features • Printer interface and preview (signals and control via touch panel) for VIDEOJET 6330 • Belts on longitudinal sealing jaws for better product handling • Motorized film unwinding • Film mark photocell • Pre-installed for Modified Atmosphere Packaging (MAP) with gas pipe and solenoid valve • U-shaped slit sealing jaws • Automatic film reel centering

Year of construction: 1986, condition: used, We offer for sale a complete paper roll rewinder with high utility value. The machine has undergone a range of significant upgrades, greatly enhancing its reliability, quality of operation, and performance. The unit is fully assembled and ready for immediate use. Technical Data: - Machine type: FAMPA KM36 slitter - Year of manufacture: 1986 - Manufacturer: Fampa Beliot, Poland - Working width: up to 2450–2500 mm - Max. working speed: up to 1000 m/min - Paper grammage range: 30–400 g/m² - Max. unwinding roll diameter: Ø 2000 mm - Max. winding roll diameter: Ø 1500 mm Machine Upgrades and Advantages: - Drive system upgrade – value approx. EUR 95,000. The old thyristor (DC) drive has been replaced with a modern system based on two Siemens (AC) motors. - New DIENES knife holder (Germany) – value approx. EUR 50,000. Completely new knife carriage, capable of operating up to 9 knives simultaneously. - GOHA ES automatic unwinder – value approx. EUR 70,000. - ProfiCool Genius PCG 300 01-NEB chiller – capacity 2.9 kW. - Control cabinet modernization – improved safety and operational reliability. Commercial Information: The machine is complete and in our plant storage. Location: 57-256 Bardo Availability: Immediate For further information or to arrange a viewing, please contact us. Bedpfx Asx Sdctsfpjwh

Year of construction: 2014, condition: used, functionality: fully functional, Type of machine REWER Manufacturing year 2014 Weight 2000 kg Power supply 14 KW Voltage 3x400 V Air pressure 7 bar Rewound material foil: OPP, PET, PVC, OPS, LDPE: 40-50 mkm. cardboard Width of material 500 mm Max. winding diameter 800 mm 1 shaft core 76 Max unwinder diameter 800 mm 1 shaft core 76 Winding speed 0-400 m/min Max weight 400 kg Wind direction right to left or left to right (both side) Lay-on shaft 2 psc. Rewinder and unwinder separate Web guide system with ultrasonic sensor 1 psc. Waste winder with splice table 1 psc. Slitting module rotary knife Control panel touch screen Adapter diameter 152 mm. 2 psc. Bwedpfx Afekw Ufzepeh Stroboscope with tape control sensor

Condition: excellent (used), LAMINATING LINE, also for panels with ‘J’, ‘U’, ‘L’ profile and 45° angles. Minimum/maximum panel dimensions: mm 260-1300 (width) x mm 1850-4250 (length) Coating: decorative paper > 40 g/m2 - 120 g/m2 or PP, PET, PVC PUR glue (with NORDSON premelter) Consisting of: 01) "ESSEDUE" double station bridge Loader 02)"‘BUFTERING" caibrating-sanding machine Mod. SWT 955 Bjdpswd Tcaefx Afpjwh 03) Motorised roller conveyor ‘HOMAG’ Mod. TVL 100 04) Cleaning-sweeping machine ‘WANDRES’. 05) Gluing system with 2 pre-melters ‘NORDSON’ for PU glue 06) Machine ‘HOMAG’ Mod. KFK 200 with: - Double glue spreader - Coil unwinder - Calender (rollers press) - Side folding and pressing zone for excess material - Panel side trimming zone 07) Cross Cut machine "HOMAG" 08) "ESSEDUE" double station bridge Unloader

Condition: excellent (used), MEMBRANE PRESS Bwsdpfx Aforwxz Rspoh For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system