Used Unwinder for sale (403)

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 808, The machine is designed for straightening and cutting wire with a diameter of 4-10 mm and a tensile strength of 400-700 N/mm2, using appropriate straightening and cutting tools. The maximum length of the cut wire is 3000 mm. Wire coil: maximum coil weight 1500 kg, maximum coil height 1000 mm, internal coil diameter 450 mm. The total length of the machine, including the wire unwinder, is approximately 10 m. Machine weight: 8 tons. Dsdpfozy Et Tex Ak Aekw Location: In our workshop.

Year of construction: 2014, condition: refurbished (used), Now available: Mueller Apparatebau unwinder 6802C available. Completely refurbed and like new. Direct available for your production. Dsdpfxehd Nxvo Ak Askw

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately. PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications Dkedpfjz Hvmhox Ak Aew - Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm - Maximum speed: up to 600 m/min - Maximum gross capacity: approx. 150 tonnes/day - Basis-weight range: approx. 45–130 g/m² - Grades produced include office, copy, writing, printing, envelope and newsprint papers - Installed electrical power: approx. 2.5 MW - Steam consumption: up to approx. 16 tonnes/hour Stock preparation / deinking plant - Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions - Essential components listed in the available technical documentation are reported to remain installed on site - Older Siemens S5 and Teleperm control and automation system Goebel U16M Built in 2005, machine no. 053-9031. - Working width: 2,800 mm - Maximum speed: 2,000 m/min - Maximum unwind diameter: 2,000 mm - Maximum rewind diameter: 1,500 mm - Minimum cutting width: 150 mm - Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator Operating status and sale terms Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults. Asking prices: - PM 5 and deinking plant: €2,200,000 - Goebel U16M: €250,000, offered separately

Condition: good (used), Year of construction: 2021, Pallet wrapper, ergonomic stretch wrapping machine with film-saving unwinder – used: Price ex works: €1,950 (net) Manufacturer: KEMAPACK Type: Stretchmobil PWR-A4 Year of manufacture: 2021 The device is not self-propelled; only the carriage movement is motorized. Space-saving and cost-effective pallet wrapping, requires only 600 mm of space around the pallet, for all types of packaged goods up to a maximum pallet height of 2,000 mm, Dodpfxo Ahw Nre Ak Aekw ideal for light and unstable products, can be used in various locations, start/stop control via toggle switch, stretch wrapping machine with motorized pre-stretch 100% Connection: 100-240 V / 50/60 Hz Battery: 24V / 17 Ah, sufficient for up to 70 pallets Suitable film type: PE hand stretch film 17-35μ with a film width of 500 mm Battery charger included The motorized carriage movement guarantees an extremely ergonomic working method. This makes it possible to wrap even low and light or unstable pallets very comfortably and without effort. Condition: good Available: immediately Location: 65479 Raunheim

Year of construction: 1993, condition: used, functionality: fully functional, We offer this used ALMORE Mini calo cutting line for thermal insulation, built in 1993, with a double unwinding unit from Jouanel, in very good working condition. These machines are specialized in sheet metal processing and are particularly suitable for thermal insulation, industrial thermal insulation, and ventilation workshops. Functions include: length cutting, deburring, punching, and profiling. Machine weight: 2 tons. If you have any questions or need further information, please do not hesitate to send us a message or call us. Dkjdpfx Ajz Dtmask Aow

Condition: good (used), Discharge – hydraulically expandable reel Reel drum: 800 mm long Reel diameter: max 520 mm, min 485 mm Dksdpfow Uqmvex Ak Asw Travel distance: approx. 200 mm Load capacity: 16,000 kg Drive: electric motor / gearbox Power: 4.0 kW Gearbox speed: 700 min-1 Manufacturer: Bauer

Condition: ready for operation (used), Year of construction: 2001, For sale is a complete set of equipment from two specialized production lines dating back to 2001 (machine park liquidation), designed for the production and final processing of electric motor stators. The machines are from reputable Italian manufacturers. The set includes two dedicated lines: 1. Line 63 (for stators with an outer diameter of ⌀90 mm / inner diameter of ⌀50 and ⌀47 mm): * Hydraulic press for the pre-forming of stator cores. * Core winding machine (stator core tying machine). * Final hydraulic press for forming the cores to their final dimensions (PiErre Galaxy A-100 with an Onda Impianti power unit). 2. Line 71 (for stators with an outer diameter of ⌀110 mm / inner diameter of ⌀55 mm): * Press for pre-forming. * Core winding machine (Mussino L.D.A.). * Final hydraulic press (PiErre Galaxy A-100). * Machine for joining the winding lead with the connection lead (Inarca Splice-Mat 1000). Dsdozuuimspfx Ak Ajkw The lines also include: * Main machine, DMG MECCANICA s.r.l., model IM3E (year of manufacture 2005). * Set of winding wire unwinding and feeding units, Min Jen Precision Machinery, model MPI-0850FD, complete with additional tensioning equipment and plates. The machines have complete safety guards, and the hydraulic power supply is provided by high-performance Oleodinamica power units from Onda Impianti. It is possible to adapt the tooling to other types of motors. The equipment is ready for loading. Please contact us.

Condition: good (used), Year of construction: 2016, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 1087-1210063, Printing solution: Xeikon QA-P toner Working resolution: Digital frontend Xeikon X-800 with toner optimization module Finishing solution: Unwinder, WFM, high-capacity stacker, Kern end processing solution Year of manufacture: 2016 Dkodpfxjx Ap Rho Ak Asw If interested, we are happy to provide further information or video material. Disassembly was carried out by the Xeikon representative.

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Dsdpfx Akeu H R Iqs Aokw Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Condition: excellent (used), Year of construction: 2021, operating hours: 700 h, functionality: fully functional, Flexor 380B Mono Film and paper cutting machine Material web width: 380 mm Dkodpjz Ag Nbjfx Ak Asw Unwinding diameter: 800 mm Rewinding diameter: 1 x 500 mm Standard rewinding shaft diameter: 76 mm Machine will be factory-inspected, 3 months warranty.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 837172, total width: 1,300 mm, total length: 2,040 mm, total height: 1,560 mm, outer diameter of label roll: 300 mm, inside diameter of label roll: 76 mm, input voltage: 230 V, Top and bottom labeling machine 652C Machine direction of travel: from left to right, as viewed from the operator side - Equipped with the HERMA Eco labeler Labeling speed of 30 m/min - Side belts, approximately 350 mm long, for stabilizing and guiding the products - with mechanical unwinder, electromechanical label sensor FS03, release edge, and mechanical rewinder Dedpfoz R Uv Ssx Ak Ajkw Further information available upon request We regularly have other demonstration machines available. We would also be pleased to invite you to our showroom to familiarize yourself with the machines during a visit or live demonstration. Please feel free to bring your own products so that we can demonstrate the application in a practical manner under your specific conditions.

Condition: excellent (used), Used textile spreader BKR M300, with floor loader for fabric rolls, table length 8 meters, fully conveyorized, width 2.04 meters, working width 1.80 meters. In good condition. Dkedjx Rdw Uopfx Ak Aow

Condition: used, Year of construction: 2020, Spray coating machine Manufacturer: Homag Type: PROFI GSF100/P/13 Year of manufacture: 2020 Technical data Spray machine for automated coating of furniture components, doors, stairs, and interior design elements with water-based or solvent-based paints. - Sled runner with a spray arm to accommodate four spray guns - Workpiece transport with a vacuum conveyor belt with additional paper support - Feed speed: 1 - 4.5 m/min - Average coating speed: 1.5 - 2.5 m/min - Working height: 900 mm - Extraction volume: approx. 10,000 m³/h - Diameter of extraction nozzle: 350 mm - Electrical connection power (without additional equipment): 10 kW - Compressed air consumption (without spray application): approx. 150 nl/min Workpiece parameters Workpiece width: 100 - 1300 mm Workpiece length: 300 - 3000 mm (without additional workpiece support) Workpiece thickness: 5 - 60 mm Workpiece weight: max. 80 kg Workpiece material - Chipboard, MDF and HDF boards - Solid wood components - Lightweight panels - The difference in height between workpieces may be a maximum of 2 mm Coating material - Paint based on water or solvent Electrical parameters - Operating voltage 400 volts, 50 Hz Roller table for machine infeed/outfeed - Powered roller table for automatic transport of workpieces Mobile paper roll trolley - For quick changing of the unwinding paper roll Touchscreen operation Dodpfxo Adr Hxj Ak Askw - Machine operation is performed via a touchscreen control panel, which is ergonomically positioned on the operating side of the machine. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Dsdpfx Akjzuyg Re Aokw Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Year of construction: 1998, condition: excellent (used), Max. roll diameter, unwinder: 750 mm (Shaft 76) Max. roll diameter, rewinder: 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Djdpfx Akszn Ayys Aekw Manufacturer: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are low; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x Razor blades

Year of construction: 2022, condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (please call ). Magni outrigger with rope winch JW2000 / 2 tons / suitable for RTH & TH series / year of manufacture: 2022 / DEMO unit / in stock & immediately available Price: €6,990.00 net / €8,318.10 gross - Max. load capacity: 2,000 kg - Length: 2,390 mm - Rope diameter: 10 mm - Working length of rope: 25,000 mm - Rope payout speed: 24 m/min - Automatic attachment recognition: yes - Lattice boom outrigger with integrated rope winch - Lattice boom construction made of tubular profiles with an optimal weight/performance ratio - Rope winch with pressure roller and hydraulic limit switch for rope winding/unwinding This attachment is suitable for the RTH and TH series. Product code: ATT-04-015 We have many other attachments for Magni in our warehouse that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telescopic handler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Dksdpfezb Ugmsx Ak Aew In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Magni range! Subject to errors and prior sale! Internal ID: 019995 = More information = Year of manufacture: 2022 New: No Intended use: Construction Please contact Marius Herden for further information.

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul Dkedjzzz N Hjpfx Ak Asw - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, WIDMANN automatic film unwinder, film unwinder Dkjdpoud U Sfjfx Ak Aew Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg good condition

Condition: like new (used), Year of construction: 2022, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, power: 56 kW (76.14 HP), coil weight: 10,000 kg, A high-performance profiling line (roll forming machine) T153 for the production of sheet metal profiles (153 mm) is for sale. Year of manufacture: 2022 Condition: Excellent (practically new equipment). The machine has only undergone minimal operation – it has processed a maximum of 50 tons of material. Main advantage: The line is completely set up, connected, and ready for immediate testing. You don’t have to wait months for delivery from the factory, nor spend large sums of money on commissioning and adjustment. The equipment is ready to be integrated into your production immediately! ⚙️ Technical specifications: Material thickness: 0.7 – 1.5 mm Line speed: 8 – 12 m/min (high productivity) Main motor: Powerful 18 kW x 2 drive Dkjdpfx Akjy Uzzfj Ajw Hydraulic unit motor: 5.5 kW Overall dimensions of the line: Length 50 m x Width 2 m x Height 1.2 m 📦 Complete line assembly: - Coil unwinder: Designed for heavy coils up to 10 tons, motor power – 11 kW. - Profiling machine T153: Main forming unit. - Automatic stacker: Length 12 m, power 4 kW (enables the automation of receiving and storing finished long products, which significantly reduces personnel costs). 🔥 Why this is a beneficial offer for your business: Minimal wear and tear: Processing only about 50 tons is considered test operation for machines of this class. You are buying a practically new machine at the price of a used one. Ready for testing: The equipment is currently connected. You can bring your own material, start the line, and personally verify the perfect geometry of the finished profile. Fast start: The machine is located directly in the Czech Republic, and it is ready for dismantling and shipment. No lengthy international paperwork or customs duties. 📍 Location: Hradec Králové, Czech Republic. Upon request, we will gladly provide additional photos and a video of the machine in operation. Call or write to inquire about the price, dismantling, and shipping conditions. We will be happy to answer all technical and organizational questions!

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Winder diameter: approx. 1,800 mm Operating voltage: 400 V Frequency: 50 Hz Rated current: 35 A Dedj Adu Tnjpfx Ak Aekw MACHINE DETAILS Manufacturer: Schleicher Type: Z134 Year of manufacture: 1995 Connected load: 11 kW Dimensions (L × W × H): 2,000 × 2,000 × 2,400 mm Weight: 700 kg EQUIPMENT Coil unwind unit

Condition: good (used), Year of construction: 2017, Manufacturer / Model: Durst · Tau 330 Year / Serial No.: 2017 · Printing: 7 colors: Cyan, Magenta, Yellow, Black, Orange, Violet, and White Speed: 40 linear meters/minute, as specified Dedpfxo Agwr Ao Ak Ajkw Web Handling: Roll unwinder · Web guide · Splice table · Roll rewinder Treatment & Drying: Corona unit – revised 2026 · UV drying unit – revised 2026 Ink & Cleaning: Ink supply system · Low-migration ink · Automatic cleaning system Controls & Workflow: Main touchscreen monitor · PMS Webgui data processing · Insetting capability Inspection & Cooling: Inspection table · Chiller included

Year of construction: 2021, condition: like new (used), functionality: fully functional, Component 1: ATM-800 P Tangential Dereeler (2 pieces) Heavy-duty dereeler for controlled unwinding of copper wire coils. • Max. coil diameter: 800 mm • Max. coil width: 300 mm • Pickup hole: Ø52 / Ø56 mm • Max. coil weight: 300 kg • Braking force: 100 - 2000 N • Brake torque: 3 - 800 Nm • Max. speed: approx. 5 rpm • PLC control with torque sensor Dsdpsz Ap R Isfx Ak Ajkw Component 2: HBK-40-S Automatic Taping Machine Professional automatic taping machine for coil and conductor insulation. • Servo-controlled taping head • Operator terminal and display • Integrated X-axis guidance • Electric hysteresis brake • Automatic overlap control via encoder • Suitable for various insulation materials

Year of construction: 1995, condition: good (used), Max. roll diameter, unwinder: 700 mm (Shaft 76) Dkodpfx Akozn Azwe Asw Max. roll diameter, rewinder: 450 mm Max. web width: 330 mm Max. speed: 220 m/min Description: Unwinder, splicing table, web guiding system, cutting unit, rewinder, counters (labels or meters), missing label detection with visual inspection.

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: H345, type of input current: three-phase, Equipment: documentation/manual, MPS EF330-6 UV flexographic label printing press, year 2008, machine no. H345, with approx. 30 million metres. The press was previously used for aluminium lid stock printing in Switzerland. Main equipment: - 6-colour UV flexographic printing press - GEW UV curing system: 5 × VCP + 1 × E2C, 6 e-Bricks - Heavy-duty unwind and rewind - 6" plus 3" unwind shafts, and 3" rewind air shaft - Roll lift on unwind and rewind - BST web guide with ultrasonic sensor - BST Powerscope web inspection - Vetaphone corona treater - Double-sided Teknek web cleaner - Automatic servo register - Rotary die-cutting station + Kocher & Beck GapMaster - FST edge trimming with two crush knives - 6 anilox rollers - 7 magnetic cylinders + 42 print cylinders mady by Spilker, covering repeats from 8" to 13.25" The machine has a documented service and maintenance history, including the original MPS installation documentation, GEW UV servicing, Bosch Rexroth servo maintenance and BST web-guide upgrade. Current condition: The press is operational and can be inspected under power. The Cool Master process chiller currently requires repair and is not in service. Dksdpfoz Itb Sjx Ak Ajw The GapMaster requires re-synchronisation following replacement of a support cylinder bearing. There is no known mechanical defect; adjustment requires the appropriate setup gauge.

Condition: used, Year of construction: 2019, functionality: fully functional, Flexographic printing machine Rotary Print 260 from 2019, Tech-Wash 8 UV colours Manual colour registration Web guiding control One die-cutting station Web width: 250 mm Max. roll diameter on unwinder: 1000 mm Max. roll diameter on rewinder: 1000 mm Max. roll diameter (matrix) on rewinder: 500 mm Machine working speed up to 120 m/min depending on material type Dedpfx Asxrdb Hjk Ajkw Units for web-turning, peel-off, lamination included Comes with 10 anilox rolls, 7 sets of printing cylinders, and 7 magnetic cylinders. Machine is 100% operational and in continuous use.