Used Valpres Ball Valve for sale (8,828)

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Iedpfx Acowhdnholjif Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: new, Year of construction: 2026, Set including the LUFT 700 VSD+PM screw compressor, a vertical 200-liter compressed air tank with fittings, and the IZBERG N10S air dryer. The LUFT series screw compressor from the Polish brand CORMAK represents state-of-the-art pneumatic solutions combined with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high efficiency guarantee effective and trouble-free operation. Compressor Technical Specifications Motor power: 5.5 kW / 7.5 HP Voltage: 400 V / 50 Hz Air delivery at 0–6 bar: approx. 690 L/min Air delivery at 6 bar: 690 L/min Air delivery at 8 bar: 650 L/min Air delivery at 10 bar: 650 L/min Outlet connection (G): 1/2" Dimensions: 800 × 520 × 740 mm Weight: 95 kg IZBERG N10S Air Dryer – Technical Specifications Inlet / outlet connection (BSP): 1" Isdpfxjyguq As Acleif Maximum working pressure: 10 bar Maximum inlet air temperature: ≤ 38°C Pressure dew point: 3°C Capacity: 1500 L/min Power: 0.58 kW Supply voltage: 230 V Dimensions (L × W × H): 380 × 600 × 625 mm Weight: 31 kg Refrigerant type and quantity: R134a, 400 g 200 L Pressure Tank – Technical Specifications Weight: 80 kg Number of connections: 6 Connection sizes: 1/2", 1", 2" Overall dimensions: 166.5 × 45 cm Tank capacity: 200 L Working pressure: 11 bar Wall thickness: 4 mm Diameter: Ø 450 mm Height: 1665 mm Included Accessories 1/2" plug – 2 pcs 1/2" nipple – 1 pc 1/2" tee fitting – 1 pc 1/2" to 1/4" reducer – 1 pc 1/4" pressure gauge – 1 pc 1" to 3/4" reducer – 2 pcs 1/2" ball valve – 1 pc Important Notice! The accessory set does not include a safety valve. A suitable safety valve must be purchased and installed separately by the user.

Condition: excellent (used), MyRef MY-ZB26-TFD refrigeration unit MyRef MY-ZB26-TFD condensing unit suitable for refrigeration applications Typical applications are Freezer cabinets in supermarkets and minimarkets cold stores Beer cellars Milk cooling systems Standard equipment Copeland Scroll M compressor ZB series with sound insulation hood Oil sump heater Liquid receiver with burst protection Filter dryer Sight glass visible from outside Ball shut-off valves Component-tested combined HP/ND safety pressure switch Electrical equipment: IP 55 switch box, compressor contactor, DIN rail mounting Condenser is integrated and protected in the housing Condenser fins coated with epoxy resin phenol (gold paint*) High-quality housing: solid in 1.5 mm galvanized and powder-coated sheet steel, base plate and feet in 2 mm sheet steel Frame construction with individually removable panels; all screws and components can be accessed from the front with minimal effort Blind rivet nuts with carriage bolts for secure, durable fastening without rust problems Pressure-controlled speed regulator with EMC filter Space-saving installation of several units next to each other possible; required mounting distance 25 mm Type: MyRef -ZB26-TFD Copeland Scroll Condensing unit Type: MyRef -ZB26-TFD Built-in compressor type: ZB19-KQE-TFD-525 Sound pressure level: 39 dbA-10 m Collector volume: 6 liters Air volume: 4500m³/h Cooling capacity: 9 kW Voltage: 400V,3PH,50Hz Power consumption: 8.9 A Dimensions: Iedpfxjvtl T De Acleif HxWxD 715 x 1120 x 450 mm Weight: 102 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), Batch ball mills find applications in various industries where the processing of materials in discrete batches is required. The versatility of batch ball mills makes them suitable for a range of applications. Here are some common batch ball mill applications: 1. Ceramics Industry: - *Glaze Preparation:* Batch ball mills are extensively used in the ceramics industry for preparing glazes. Raw materials such as feldspar, quartz, and clay are ground with ceramic balls to achieve the desired particle size for glaze formulation. 2. Chemical Industry: - *Material Grinding:* Batch ball mills are used for grinding and blending various chemical materials. This includes the production of pigments, dyes, and other specialty chemicals where precise particle size control is crucial. 3. Pharmaceuticals: - *Drug Formulation:* In pharmaceutical manufacturing, batch ball mills are used for grinding and blending powders to create drug formulations. The controlled environment provided by these mills is essential for maintaining the integrity of pharmaceutical compounds. Isdpsq I N H Njfx Aclsif 4. Food Industry: - *Ingredient Mixing:* Batch ball mills may find application in the food industry for mixing and grinding ingredients. This can include the production of food additives, flavorings, and other powdered or granular products. 5. Mining and Minerals Processing: - *Ore Grinding:* Batch ball mills are used in mining and minerals processing for grinding minerals and ores. The controlled grinding helps in obtaining the desired particle size for subsequent processes, such as mineral separation or extraction. 6. Paints and Coatings: - *Pigment Dispersion:* In the paints and coatings industry, batch ball mills are employed for dispersing pigments into paint formulations. Achieving a uniform particle size is crucial for the quality and appearance of the final coating. 7. Building Materials: - *Raw Material Grinding:* Batch ball mills are used in the preparation of raw materials for the production of building materials, such as cement and concrete. Grinding of materials like limestone and clay helps in obtaining the desired fineness for subsequent processes. 8. Electronic Materials: - *Ceramic Powder Processing:* In the electronics industry, batch ball mills can be employed for processing ceramic powders used in the production of electronic components and insulating materials. 9. Research and Development: - *Material Testing:* Batch ball mills are often used in research and development laboratories for testing and optimizing material formulations. They provide a controlled environment for small-scale processing and experimentation. 10. Customized Applications: - *Specialized Processes:* Batch ball mills can be adapted for various specialized processes in different industries where precise grinding and mixing are required. Custom modifications can be made based on specific application requirements. When using a batch ball mill, it's important to consider factors such as the type of material being processed, desired particle size, and the specific requirements of the end product. Additionally, following the manufacturer's guidelines and maintaining proper operating conditions are essential for efficient and effective milling processes. Technical details We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length X ton) 3050mm x 175t Installation height 530mm Outreach 450mm Stroke 265mm Y1, Y2, X - 3 axes Iisdpsttatbefx Acljf Control unit - DT 15 Manuel F. AKAS FPSC safety system CE F.AKAS BVLT light barrier and safety cages (for tandem press brakes) Servo motor backgauge & linear guide & Ball screw system (X) Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard -Electrical equipment according to worldwide standard Selected options -Control unit - Delem 66S - NEW -Motorized crowning - X=650mm X,R, Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Condition: new, Year of construction: 2026, New Kaeser after-compressor N153-G (10/40) with ball valve and pressure switch on the inlet side with ball valve and pressure switch on the outlet side with check valve Time of delivery: 6 Wochen Iodjwl Icdspfx Acloif Technical Data:Inlet pressure: 10 bar Outlet pressure: 40 bar Pressure ratio: 3.7 Flow rate: 0.89 m³/min Min. ambient temperature: 2 °C Max. ambient temperature: 40 °C Compressor block speed: 650 rpm Number of cylinders: 2 Rated power of drive motor: 4.0 kW Efficiency class of drive motor: IE3 Protection class of drive motor: IP 55 electrical supply: 400 V / 3 / 50 Hz Sound pressure level: 74 dB (A) Compressed air connection on the inlet side: G 3/4" Compressed air connection on the outlet side: G 1/2" Dimensions W x D x H: 1390 x 720 x 820 mm Weight: 255 kg Visit our store.We always have a large selection of new and used compressors in stock!

Condition: excellent (used), Used stainless steel vessel / transport container / IBC Previous application: Chemicals Item number: 10885 Capacity: 999 liters Type: Vertical, in galvanized stacking frame Material (wetted parts): 1.4301 / AISI304 Manhole: 400 mm Version: Single-walled Operating pressure (as per nameplate): -0.6/+3.0 bar Operating temperature: 20 °C Tank dimensions: Overall width: 1200 mm Overall length: 1200 mm Overall height: 1750 mm Materials: Internal: 1.4301 / AISI 304 External parts: Galvanized steel Features: Nameplate: yes Iodpfxjxr Arde Acloif Outlet diameter: 45 mm Outlet valve: Ball valve Distance from outlet to floor: 270 mm Ball valve on the top panel Empty weight: 288 kg

Condition: used, MOZZARELLA STRETCHER APPROXIMATELY 1.5 TONS BRAND: ALMAC MILK PASTRIZER ( 5,000 LITRES PER HOUR ) FULLY AUTOMATIC STEAM VALVE AND AUTOMATIC DIVERT VALVE AND A TINY TAG TO RECORD TEMPERATURES BRAND: REDA DOUBLE VACUUM SEALER AND GAS FLUSH AVAILABLE HAVE INSTALLED A BRAND NEW PUMP BRAND: VIKING DIPPING MACHINE IT IS FOR SHRINK WRAP PRODUCTS AFTER SEALING NEVER USED BRAND: VIKING STEAM MOZZARELLA COOKER ( 40kg PER BATCH ) 120kg PER HOUR APPROXIMATELY 5 YEARS OLD, IN EXCELLENT CONDITION , ALSO COMES WITH PLATFORM BRAND: DIMA CHEESE STICKS MACHINE ( MOULDER ) IT CAN PRODUCE APPROX 30,000 STICKS PER HOUR, IT COMES WITH SIEMENS TOUCH SCREEN, FULLY AUTOMATIC & MANUAL OPTIONS. APPROXIMATELY 5 YEARS OLD ( ONLY USED A COUPLE OF TIMES ) EXCELLENT CONDITION BRAND: MILYLAB MOZZARELLA MOULDER IT CAN PRODUCE APPROXIMATELY 1.5 TONS PER HOUR IT CAN PRODUCE UP TO 10KG BLOCK, BOCCONCINI 25g, MILK CHERRIES 10g, AND MOZZARELLA BALLS 500g BRAND: ALMAC Iijdozc Il Sspfx Aclsf CHEESE VAT (5000 litres ), BRAND: SORDI THE CHEESE VAT IS 3 YEARS OLD IT INCLUDES SIEMENS TOUCHSCREEN & CURD PUMP; CIP CONNECTIONS AND A WATERPROOF STANDING PLATTFORM IT HAS ON ONE SIDE CUTTING BLADES AND ON THE OTHER SIDE HAS PADDLES PERFECT FOR PRODUCING HARD , MOZZARELLA AND SOFT CHEESES HEAVY DUTY CIP STATION FULL AUTOMATIC OR MANUAL OPTIONS 300 LITRE CLEANING TANK APPROXIMATELY 3 YEARS OLD IN EXCELLENT CONDITION BRAND: SORDI

Condition: used, Year of construction: 1992, Second-hand machine Year of manufacture: 1992 Iisdpfx Aezk Nl Uocljf Features and technical specifications: Electrically and oil-hydraulically controlled frame press Pressure up to 1,200 kg Two movable longitudinal pressure beams are mounted on double ball bearings and guide rails These rails allow for continuous height adjustment of the cylinders The press cylinders are adjusted using a quick-adjustment pressure lever with self-locking mechanism Two electric-hydraulic control valves (with 3 operating stages) are operated by hand levers This allows you to press with precision and assemble even the most complex frame constructions Working height x working length: 2000 x 3000 mm with 3 vertical pressure cylinders with 2 horizontal pressure cylinders Pressure cylinder stroke 120 mm Three-phase motor 1.3 kW Pressure control unit/press pressure adjustable 0–60 atü Dimensions: 3950 x 900 x 2550 mm Weight approx. 620 kg Availability: at short notice Storage location: Flörsheim

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Machine Description BRINOX LEP 12 – CIP System Precipitation PRE LEP 12 CS6725 Package 5 Manufacturer BRINOX Prozess- und Edelstahltechnik GmbH, Offenburg Year of Manufacture 2020 Serial Number 1003614 Technical Data Compact CIP skid system in stainless steel frame design. Product designation: LEP 12 – CIP System Precipitation PRE. Dimensions approx. 1520 x 970 x 1994 mm. Product-contact parts: Stainless steel 1.4435. Frame and structural components: Stainless steel 1.4301. Integrated shell-and-tube heat exchanger by NEUMO. Centrifugal pump in hygienic design. Piping fully welded in pharmaceutical grade. Insulated media lines. Fittings incl. GEMÜ ball valves. Various integrated pressure gauges and measuring instruments. Calibrated pressure measurement system (Fluke pressure transducer, measuring range −1 to 20 bar, resolution 0.001 bar, accuracy 0.06 % FS). Media Connections: NaOH Acetic acid CIP supply CIP return Black steam Black steam condensate Neutralized wastewater Pressure tightness test performed with compressed air. Test pressure range approx. 3.19–3.24 bar. Maximum measured pressure drop < 0.015 bar during the test period. Result: passed. Application CIP cleaning system for pharmaceutical process plants, especially for precipitation vessels. Suitable for caustic and acid cleaning as well as steam integration. Designed for hygienic applications in pharmaceutical production. Construction Welded, compact skid design with robust stainless-steel frame construction. Hygienic piping layout with defined media paths. Integrated shell-and-tube heat exchanger for CIP media temperature control. Integrated process pump, valve technology, and instrumentation on a compact frame. General tolerances according to EN ISO 13920. Industrial design with crane lugs for transport. Condition New, unused, and in original packaging. The system was only inspected as part of the FAT process and has never been in production use. FAT / Documentation Status Complete Factory Acceptance Tests carried out. Pressure tightness tests successfully passed. Calibration certificates available. All test protocols fully documented. Complete Documentation List FAT documentation Pressure test protocols Calibration certificates P&ID 3D drawings Material and welding documentation Nameplate and manufacturer documentation Special Features Pharma-grade material selection. Compact, immediately ready-to-use skid unit. High-quality components from renowned manufacturers. Complete technical documentation available. Iisdpfxjyl H Taj Acljf Immediately available.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, BRINOX LEP13.2 – AS Storage Tempering Unit – GMP – Year of Manufacture 2020 – Like New Manufacturer: BRINOX Process Systems LEP13.2 KK6772 Package 12 System type: LEP13.2 – AS Storage Tempering Unit Project: Ammonium sulphate system Year of manufacture: 2020 Serial number: 1003624 Tag number: MR-ASF-ASF61-KK6772 Location: Germany DESCRIPTION For sale is a nearly new LEP13.2 tempering unit in pharmaceutical GMP-compliant design, manufactured by BRINOX Process Systems. The unit is constructed as a compact, pre-assembled skid unit and was designed for use in an ammonium sulphate storage system. Complete project and FAT documentation is available. TECHNICAL DATA Type: LEP13.2 – AS Storage Tempering Unit Medium: Ammonium sulphate Design: Pharma / GMP Materials: Stainless steel 1.4435 / 1.4301 Control air pressure: 6 bar Pressure and leak testing performed FAT successfully completed MAIN COMPONENTS 2x KSB Movitec centrifugal pumps Alfa Laval plate heat exchanger Electric instantaneous water heater Reflex expansion vessel Samson control valve GEMÜ ball valves (manual & pneumatic) Labom pressure gauges Comprehensive sensors & measuring instruments Insulated pipework Stainless steel skid frame construction APPLICATIONS Temperature control of process media Use in GMP-regulated production areas Pharmaceutical and biotechnology plants Media circuits with temperature control CONSTRUCTION Compact, closed skid unit Fully piped Professionally insulated piping High-quality industrial components Service-friendly layout Completely dismountable and transportable CONDITION Condition: New, original packaging Year of manufacture: 2020 Project-specific unit Hardly any operating hours Visually and technically in excellent condition DOCUMENTATION FAT documentation Pressure test certificates Ijdpfxjyl Na Nj Aclsif P&ID diagrams Layout drawings Factory certificates according to EN10204 Materials lists EU declarations of conformity FEATURES Complete GMP documentation High-quality brand components Ideal for pharmaceutical and biotech applications Immediately available Significantly below new price

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Product: LEP13.1 – AS-Batch Temperature Control Unit System type: Temperature control unit for ammonium sulfate batch system Year of manufacture: 2020 Serial number: 1003620 Tag number: MR-ASF-ASF61-KK6770 Equipment number: 20022748 Media Connections / Process Data WCOV – Chilled water supply: 6 °C WCOR – Chilled water return: 12 °C WSV – Process/municipal water AIP10 – Control compressed air 6 bar Design as a closed temperature control module with integrated pump and heat exchanger technology. Dimensions Overall dimensions as per layout: approx. 1920 x 1435 x 1573 mm (L x W x H) Compact, skid-mounted unit with welded stainless steel frame. Construction Frame construction in stainless steel Fully insulated piping (industrial insulation) Stainless steel shell-and-tube heat exchanger Electrical inline water heater WT1011 Pump PU1021 Pump PU9203 Heat exchanger WT1001 Expansion vessel BH9701 Fittings: GEMÜ shut-off valves Pneumatically actuated valves Manual ball valves Pressure gauges Sensors and instrumentation as per P&ID Complete piping and component labeling provided. Condition New and in original packaging. Not yet put into operation in production. Factory new condition. Supplied directly by the manufacturer Brinox. FAT / Test Status FAT carried out. Leak test: Test medium: Compressed air Test pressure: approx. 3 bar Holding time: 1 hour Result: Passed Calibration: Pressure gauge calibrated Measuring range: 0–10 bar Calibration certificate available Traceable to national standards Documentation Turn-Over-Package complete Included documents: FAT plan FAT report Non-conformance form Layout drawing check Maintenance and calibration accessibility check P&ID review Leak test report Calibration certificates Documentation check Factory certificate 2.1 according to EN 10204 Iodpfx Acoyl Izxjleif LBM material list incl. EU declarations List of installed components – equipment List of installed components – instrumentation points (PLT) Material parts list for as-built isometry Key Features GMP-compliant construction Pharma/biotech project quality Full traceability Compact plug-and-play skid design Completely piped, insulated, and ready to connect Immediately available

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP2.3 – Wash Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003507 LEP2.3 KK6761 Package 8 Tag No.: MR-INH-VPR61-KK6761 Equipment No.: 20023781 Technical Data System Type: Temperature control unit / heating and cooling module for wash solution (CIP or process washing system) Design: Compact, fully pre-assembled skid unit in robust stainless steel frame construction, crane-liftable via integrated lifting points. Frame and Construction: Welded stainless steel construction in industrial design, free-standing, multi-level piping configuration for optimal space utilization. Maintenance-friendly access from multiple sides. Integrated cable trays. Piping: Stainless steel process piping in hygienic design, welded and partially flanged. Multilayer thermal insulation of main lines and apparatus. Integrated drain and vent fittings. Valve Technology: Multiple manual ball valves (GEMÜ) in main and bypass circuits. Pneumatically actuated control and shut-off valves for automatic temperature regulation. Diaphragm and control valves integrated in the heating and cooling circuit. Instrumentation and Control: Temperature measurement points in both supply and return lines. Pressure sensors in the process section. Integrated flow measurement. Electrical junction box with protective labeling. Automatic temperature control via pneumatic control valve. Iedpfx Acjyl It Isljif Heat Exchanger: Cylindrical stainless steel heat exchanger, insulated and integrated into the piping system. Designed for controlled heating and/or cooling of the wash solution in a closed loop. Pump Technology: Two electrically driven centrifugal pumps with red-painted motors for process recirculation within the temperature control unit. Electrical: Electrical junction box with warning markings. Wired sensors and actuators. Prepared for integration into a central PLC or process control system. Application This system is used for precise temperature regulation of a wash solution within a pharmaceutical or biotechnological process system. Typical areas of application include CIP systems, production plant washing stations, and temperature-controlled cleaning processes in the pharmaceutical and biotechnology sectors. The wash solution circulates in a closed loop via pumps, is temperature controlled by the integrated heat exchanger, and continuously monitored by sensors. Temperature is regulated automatically via pneumatic control valves to maintain defined setpoints accurately. Construction Compact modular skid design with fully insulated main lines. Stainless steel surfaces in hygienic industrial finish. Clearly organized media routing and structured piping layout. Crane-transportable via integrated lifting points. Condition Year of manufacture 2020. Very good visual and technical condition. Professional execution in pharmaceutical plant engineering. FAT / Documentation Typically supplied with CE conformity, Factory Acceptance Test (FAT), and technical documentation including P&ID diagrams and material certificates for product-contacting components. Special Features Fully insulated temperature control module in a compact, high power density design. High-quality valve technology (GEMÜ). Multiple integrated measurement and control points. Suitable for validated pharmaceutical processes. Industrial, pre-assembled skid solution with clearly structured media routing.

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer BRINOX d.o.o. Project Number B-0001113-LEP2.3 LEP 2.3 KK6762 Package 9 Module M024 Product Description LEP2.3 – Wash Solution Temperature Control Unit Serial Number 1003572 Equipment Number 20022782 Tag Number MR-INH-VPR61-KK6762 Year of Manufacture 2020 Technical Data System Type Pharma temperature control skid for precise temperature regulation of wash and elution solutions. Constructed as a compact, multi-level stainless steel frame design with fully integrated pump, heat exchanger, and valve technology. Dimensions Length 1920 mm Width 1365 mm Height 1840 mm Design Fully pre-assembled, insulated temperature control skid Pharmaceutical design according to GMP requirements Industrial stainless steel frame construction Materials Product-contact parts: Stainless steel 1.4435 / 1.4571 Frame construction: Stainless steel 1.4301 Welds as per EN ISO 13920 D Insulation Completely insulated piping and equipment Closed-cell high-performance insulation with black protective sheathing Main Components PU1021 Process Pump PU9203 Chilled Medium Pump WT1001 Plate Heat Exchanger WT1011 Finned Tube Heat Exchanger BH9701 Expansion Tank Pneumatic Control Valves GEMÜ Stainless Steel Ball Valves Pressure Transmitters Temperature Measurement Points Pressure Gauges Electrical Junction Box with Warning Labels Stainless Steel Cable Trays Media Chilled Brine Supply / Return Wash Solution Process Medium Control Air 6 bar All media connections sealed at factory and packaged securely for transport. Leak Testing Performed as pressure test with compressed air. DP-01 Medium: Compressed Air Test Pressure: 3.15 bar Pressure Drop: 0.13 bar Date: 27.07.2020 Result: Passed DP-02 Medium: Compressed Air Test Pressure: 3.28 bar Pressure Drop: 0.07 bar Date: 26.07.2020 Result: Passed Pressure holding time: 1 hour each No leaks detected Calibration Certificates Calibration Laboratory: LOTRIČ Metrology Certificates according to EN ISO/IEC 17025 Measurement Ranges: –1 to 20 bar and 0 to 10 bar Calibration performed Documentation Scope FAT Plan and Report Deviation Report Layout Drawing Check Maintenance Inspection P&ID Leak Test Report Calibration Certificates Works Certificate 2.1 EN10204 Material List As-Built Isometrics Complete Turn-Over Package Inspection Status FAT performed Pressure test passed Calibrations available PED-compliant design Pharma documentation complete Application Temperature control of wash and elution solutions in biopharmaceutical production facilities Suitable for GMP environments Condition New system Original packaging Unused Year of manufacture: 2020 Factory condition Fully documented Iodpfxoyl Iwte Aclsif Immediately available

Condition: used, Year of construction: 2019, Overview  This vacuum filling and capping monoblock was manufactured in 2019 by the German company ALWID Maschinenbau GmbH. The model ALWID-SUPERIOR-48HV-10PP is designed for level filling of glass bottles using a high-vacuum system, making it ideal for low- to medium-viscosity liquids such as spirits or similar products. The system features 48 filling valves and a 10-head ROPP capping unit, ensuring efficient, high-precision operation. With a performance of up to 12,500 bottles per hour (0.7 L), it offers a professional solution for high-speed bottling lines. The machine is CIP-capable, equipped with spray balls, and includes a Siemens S7 control system. It has approximately 14,000 operating hours and is already dismantled. Missing peripheral components such as the cap sorter, bunker conveyor, and chutes can be procured upon request and a factory overhaul is also available upon demand. Technical data  Ijdpsxqhvlsfx Aclsif - Filling system: High-vacuum with liquid ring pump - Capping system: 10-head ROPP (PP) closer - Capacity: Up to 12,500 bph (0.7 L bottles) - Filling valves: 48 - Bottle size: Max. 105 mm (W) × 65 mm (D) for shaped bottles (every second valve used) - Control system: Siemens S7 - Cleaning system: CIP with spray balls - Operating hours: Approx. 14,000 h - Working direction: Right to left - Dimensions (machine): 4.20 m × 2.80 m × 2.90 m (W×D×H) - Dimensions (filling tower): 1.40 m × 1.30 m × 3.40 m (W×D×H) Scope of delivery  - Filling and capping block | ALWID Maschinenbau GmbH | ALWID-SUPERIOR-48HV-10PP | 2019 | High-vacuum filler with 48 filling stations and 10 ROPP capping heads, Siemens S7 control system, CIP-capable, approx. 14. 000 operating hours - Filling tower | ALWID Maschinenbau GmbH | - | 2019 | 3.40 × 1.30 × 1.40 m, part of the system - Format parts | ALWID Maschinenbau GmbH | - | 2019 | 10x PP28x22 mm deep capping heads, 1x format set for 76 mm straight-neck bottle - Accessories | 2 EURO pallets with format and head components  

Condition: used, Year of construction: 2012, Overview  This 20 hL brewhouse was manufactured in 2012 by Schwarzenbeker. It is a 2-vessel system (Mash/Boil + Lauter/Whirlpool) with a net capacity of 18–19 hL and a maximum mash load of 600 kg. The brewhouse is steam-powered with a double steam jacket and PLC-based automation, offering recipe management and precise process control. It is in generally good condition, though a minor review is recommended. The package also includes a biomass steam generator (Teivy, 2012), a malt mill (Robix, 2012), and a plate filter (Cespedes, 2013). Technical data  - Capacity: 20 hL gross / 18–19 hL net - Configuration: 2-vessel system – Mash/Boil + Lauter/Whirlpool Iodpfx Acsyb S Egsljif - Max. mash load: 600 kg - Average efficiency: 83% - Average lautering time: 2 hours - Heating system: Double steam jacket (lateral + bottom, independent) - Max. pressure: 3 bar - Automation: Touch-screen PLC, VFD for pump/agitator/cutter, temperature control, programmable mash recipes - Monitoring: PT100 temperature probes in Mash/Boil and heat exchanger outlet - CIP: Spray balls in Mash and Lauter vessels - Safety: Pressure relief valve in Whirlpool - Other features: Auger feed connection, operation manuals included Scope of Delivery  - Brewhouse | Schwarzenbeker | 20 hL Brewhouse | 2012 | 2-vessel system, steam-heated, PLC automation - Steam Generator | Teivy | Biomass Steam Generator | 2012 | Pellet-fired, fully functional - Malt Mill | Robix | Roppi-1100 | 2012 | Incl. metal detector magnet - Plate Filter | Cespedes | – | 2013 | 50–98 plates, adaptors included, no pump  

Condition: new, Year of construction: 2026, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel construction, rear outlet Iodpjzr Rl Ssfx Aclsif Superstructure: Water tank roll-off container, approx. 12,000 liters. ARCHIVE IMAGES Water tank without platform, approx. 12,000 liters - according to DIN 30722-1. - Internal dimensions (L x W x H): 5500 x 2394 x 1003 mm - Overall dimensions (L x W x H): 6,081 mm x 2,394 mm x 1,743 mm - Material grade: S235 (St-37) - Floor plate / wall plates: Smooth floor plate, thickness 5 mm, sides 3 mm, roof and rear wall 4 mm - At the rear, bottom: 2x Storz A couplings with ball valve (4 inches) - At the rear, top: one Storz B coupling with bend and cover (2 inches) - At the front, top on the hook: one Storz B coupling with bend, coupling, and cover (2 inches) - Galvanized and screwed-in step ladder on the front wall, pipe for venting (with ball valve for closing) - Frame made of INP180 - Manhole on the roof: diameter 600 mm - Inside: 3 baffle plates, diameter 600 mm (large cavities) - Waterproof (tested for watertightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 µm, externally primed with epoxy resin paint, 60 µm and painted with 2K paint (polyurethane paint B7), 40 µm in RAL color shade 3000 Red. With UVV label (DGUV), checklist (safety instructions), and warning marking - waterproof (tested for watertightness). Available from approximately the end of September / beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: new, Year of construction: 2026, color: red, overall weight: 14,630 kg, maximum load weight: 12,500 kg, empty load weight: 2,130 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, rear discharge Body: Water tank roll-off container, approx. 10,000 liters. ARCHIVE IMAGES Water tank with platform, approx. 10,000 liters - according to DIN 30722-1. - Clear internal dimensions L x W x H: 5400x2394x approx. 1000 mm (tank 4600mm, platform 800mm) - Overall dimensions L x W x H: 5,683mm x 2,394mm x 1,616mm - Material quality: S235 (St-37) - Floor plate / wall plates: floor plate thickness 5mm, sides 3mm, roof and rear wall 4mm - rear platform made of non-slip sheet metal 5 mm - Frame made of INP180 - Manhole on the roof: diameter 600 mm - Inside, 3 baffle plates, diameter 600 mm (large cavities) - A galvanized and screwed-on step ladder on the front wall - At the bottom of the rear wall, an A-connection with a tap - At the top rear, a B-connection with a flap for filling - On the front wall, a C-connection with a ball valve at the bottom left and right, pipes for venting - 2 greasable steel rollers, L=300mm - 2 riser pipes, galvanized and screwed-on (1 at the front and 1 at the rear) - 2 level indicators made of hose (1 at the front and 1 at the rear) Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 μm, externally primed with epoxy resin paint 60 μm and painted with 2K paint (polyurethane paint B7) 40 μm in RAL color 3000 Red. Iodezr Rl Eepfx Acleif With UVV label (DGUV), checklist (safety instructions), and warning marking - waterproof (water tightness will be tested). Available probably from the end of September / beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2026, color: red, overall weight: 14,630 kg, maximum load weight: 12,500 kg, empty load weight: 2,130 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, rear discharge Body: Water tank roll-off container, approx. 10,000 liters. ARCHIVE IMAGES Water tank with platform, approx. 10,000 liters - according to DIN 30722-1 - Internal dimensions L x W x H: 5400x2394x approx. 1000 mm (tank 4600mm, platform 800mm) - Overall dimensions L x W x H: 5,683mm x 2,394mm x 1,616mm - Material grade: S235 (St-37) - Floor plate / wall plates: Floor plate thickness 5mm, sides 3mm, roof and rear wall 4mm - at the rear, a platform made of non-slip sheet metal 5 mm - Frame made of INP180 - On the roof, a manhole: diameter 600 mm Iiodpfszr Rlxjx Aclsf - Inside, 3 baffle plates, diameter 600 mm (large cavities) - On the front wall, a galvanized and screwed-on ladder - At the bottom of the rear wall, an A-connection with a tap - At the top rear, a B-connection with a flap for filling - On the front wall, a C-connection with a ball valve at the bottom left and right, pipe for venting - 2 greased steel rollers, L=300mm - 2 vertical pipes, galvanized and screwed-on (1x front and 1x rear) - 2 level indicators made of hose (1x front and 1x rear) Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 µm, externally primed with epoxy resin paint, 60 µm and painted with 2K paint (polyurethane paint B7), 40 µm in RAL color 3000 Red with UVV sticker (DGUV), checklist (safety instructions) and warning marking - watertight (will be tested for watertightness) Available presumably from the end of September/beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, Year of construction: 2026, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel construction, rear outlet Body: Water tank roll-off container, approx. 12,000 liters. ARCHIVE IMAGES: Water tank without platform, approx. 12,000 liters - according to DIN 30722-1. Isdpfx Aezr Rmcocleif - Clear internal dimensions L x W x H: 5500 x 2394 x 1003 mm - Overall dimensions L x W x H: 6,081 mm x 2,394 mm x 1,743 mm - Material grade: S235 (St-37) - Floor plate / wall plates: Smooth floor plate, thickness 5mm, sides 3mm, roof and rear wall 4mm - At the rear, bottom: 2x Storz A connections with ball valve (4 inches) - At the rear, top: One Storz B connection with bend and cover (2 inches) - At the front, top, on the hook: One Storz B connection with bend, coupling, and cover (2 inches) - Galvanized and screwed-on step ladder on the front wall, pipe for venting (with ball valve for closing) - Frame made of INP180 - On the roof: Manhole, diameter 600 mm - Inside: 3 baffle plates, diameter 600 mm (large cavities) - Watertight (will be tested for watertightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200, 300 μm, externally primed with epoxy resin paint, 60 μm, and painted with 2K paint (polyurethane paint B7), 40 μm, in RAL color 3000 red with UVV label (DGUV), checklist (safety instructions), and warning marking - watertight (will be tested for watertightness) Available from approximately the end of September / beginning of October 2026. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, interim sale, and errors!

Condition: used, functionality: fully functional, Conical mixer steel gross 5000 litres net 3500 litres (70%) Iiedpfxeydu Uvj Aclof 2 outlets: 1x bottom outlet with original ball segment, 1x side outlet with slide gate valve (position for lump breaker) cantilevered mixing screw operates well (dismantled after factory shutdown) including base frame

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, tank capacity: 36,784 l, total height: 6,245 mm, inner diameter: 3,400 mm, outer diameter: 3,770 mm, overall weight: 4,000 kg, negative pressure: 0.02 Pa, overpressure (max.): 2 bar, 2 x 37 m³ CCT Vessels / Beer Pressure Tank / Fermentation and Storage Tank Technical Data / Dimensions Available units: 2 Total volume: approx. 36,784 liters Tank type: Pressure vessel Condition: used Suitable for food use: yes Design: suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Total height: approx. 6,245 mm (incl. insulation dome approx. 7,245 mm) Weight (empty): approx. 4,000 kg Specific weight of medium: 1.0 t/m³ Operating pressure: Overpressure Operating pressure: 2 bar Test pressure: 2.9 bar Cone wall thickness: approx. 3.5-5 mm Top head wall thickness: approx. 6 mm Shell/Cylinder wall thickness: approx. 3 mm Operating temperature: -10°C / +50°C Material: Inner shell material: Stainless steel V2A (1.4301) Internal surface: ground and pickled Heating/Cooling System Cooling medium: Glycol Operating pressure: 3.0 bar Operating temperature: -3 °C Heating/Cooling system material: Stainless steel V2A (1.4301) 1 x shell cooling zone with approx. 112 ltr. capacity 1 x cone cooling zone with approx. 40 ltr. capacity Insulation Insulation thickness: approx. 150 mm (shell + top head), cone: 100 mm Insulation material: PU foam Cone cladding: Stainless steel (1.4301) Shell cladding: Aluminium trapezoidal sheet Equipment Mounting type: Suspension lugs Number: 4 Fastening: fixed Iiedpfx Aeyhzrgsclef Top head type: Torispherical head Lower head type: Conical Top head: 1 x manway DN 1000 with insulated hood and vent DN 80 1 x roof edge railing 1 x spray ball DN 32 incl. spray tube (removable) 1 x Cleaning-Air valve combination (RLV) consisting of: 1 x vacuum valve DN 50 1 x safety valve DN 25 1 x cleaning connection DN 100 1 x air connection DN 50 (threaded) Shell: 2 x temperature measuring connection with insulated box 1 x condensate pipe DN 32 1 x sampling line DN 10 1 x cable protection pipe DN 50 1 x cleaning line DN 50 1 x return manifold DN 40 (cooling) 1 x supply cooling DN 25 1 x cooling vent DN 10 1 x cooling drain DN 20 Lower head/cone: 1 x sample valve DN 10 1 x swiveling cone NW 450 1 x cone with threaded outlet DN 100 Documentation: Drawing Inspection book TÜV certificate

Condition: used, Year of construction: 2022, operating hours: 458 h, power: 183 kW (248.81 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, all wheel drive, cabin, front linkage, parking heater, Engine and Transmission* Engine: Deutz TCD 6.1, 6 cylinders, 6057 cm³, Emission Stage V (Tier 5), SCR system, EGR, DPF, 237 hp rated power, 247 hp maximum power * Transmission: Continuously variable SDF TTV T7780 transmission with four driving strategies and PowerZero * , powershuttle with SENSE CLUTCH, four driving strategies (Auto+, Auto, PTO, Manual), electronic control Iedpszu U Trefx Acloif ----Cab and Comfort* Cab: MaxiVisionPro, air-suspended, level-regulated, additional air vents, InfoCenterPro with 5" color display * Seats: Driver's seat Max-Comfort XXL partial leather (WARRIOR), passenger seat padded, backrest extension, automatic safety belt * Connectivity: CTM module preparation, SDF Fleet Management, 1 year connectivity package, Monitor3 12" with extensive functions * Air Conditioning: Automatic climate control, sunroof with UV coating * Radio: DAB+ High Level radio with hands-free function, Bluetooth, USB * AGROSKY Performance Steering, EASY STEER * ISOBUS preparation, GNSS receiver for RTK NTRIP ----Lighting and Visibility* LED lighting: Numerous LED work lights (roof, hood, fenders), LED position lights, LED turn signals, LED brake light * Mirrors: Electrically adjustable and heated XL telescopic rearview mirrors with LED lighting ----Hydraulics and Lifting System* Hydraulics: Load-sensing variable displacement pump (210 l/min), 5 additional control valves electro-hydraulically, Power Beyond coupling * Lifting System: Electronic control unit for front linkage, rear linkage with electronic control (EHR), 11,100 kg lifting capacity, Walterscheid drawbar, hydraulic top link, lower link stabilization ----PTO and Hitch* PTO: Three electronically switched rear PTO speeds (540E/1000/1000E), Duo front PTO 1000/1000 ECO * Hitch: Automatic hitch, long drawbar with ball hitch, height-adjustable, Sauermann system ----Tires* Michelin tires: 600/70R30 front, 710/70R42 rear, rims fully welded, over-width marking ----Additional Equipment (WARRIOR Package)* Matte black paint, Warrior lettering, chrome grille above the exhaust, muffler with stainless steel trim, special seat and comfort equipment * Comfort package for front linkage, dirt-repellent floor mat, toolbox ----Other Equipment* Electronic parking brake, electronic engine control, Easy Steer, AGROSKY Performance Steering, compressed air service connection, dual-circuit compressed air brake system, toolbox, various sockets and connections, extensive warning and safety instructions and much more. ----Vehicle Number 9379-----Errors and prior sale excepted

Year of construction: 2013, condition: used, GEA Sour Cream Thermization Line Capacity: 1,500–2,000 l/h Year: 2013 Installed & Connected – Excellent Overall Condition Complete GEA Process Line We are offering a complete GEA Sour Cream Thermization Line originally designed for the thermal treatment of sour cream and fermented cream products. The line was installed in 2013 and remains installed and connected on site. It is available for inspection and can be offered complete with associated process equipment, automation, and technical documentation. The system was supplied as a complete GEA process line and includes a buffer tank, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and fully automated process control. Main Application Originally designed for: • Sour Cream • Fermented Cream (25% fat) Potential Applications • Kefir • Cultured Buttermilk • Drinking Yogurt • Ayran • Cultured Dairy Beverages • Other fermented and viscous dairy products Process Capacity • Approx. 1,500–2,000 l/h Original Process Parameters • Product: Sour Cream / Fermented Cream (25% fat)• Maximum product viscosity: 230 cP • Feeding temperature: 15°C • Thermization temperature: 55–70°C • Outlet temperature: 20–50°C Scope of Supply 1. Sour Cream Buffer Tank 10,000 L Stainless Steel Insulated Tank • Approx. 10,000 litre capacity • Stainless steel construction • Insulated design • Agitator with 5.5 kW drive • CIP spray balls • Temperature and level instrumentation • Hygienic dairy execution • Complete with service platform and access ladder Manufacturer: • PRO-WAM Year: • 2013 2. GEA Thermization Skid GEA Ecoflex Plate Heat Exchanger System Iiodozffzujpfx Aclof Complete thermization module including: • Regeneration section • Hot water heating section • Cooling section with ice water • Integrated hot water circuit • Stainless steel skid-mounted designMain features: • GEA Ecoflex plate heat exchanger • AISI 316 heat transfer plates • Maximum working pressure: 10 bar • Hygienic dairy construction • Fully integrated process control 3. Pumps & Process Equipment Product Pumps • Tuchenhagen TP centrifugal feed/CIP pump • Tuchenhagen VPSH positive displacement rotary lobe booster pump Process Equipment • Stainless steel process piping • Automated sanitary valves • Distribution valves • Butterfly valves • Temperature instrumentation • Pressure instrumentation • Auxiliary process equipment 4. Hot Water Circuit Complete hot water generation and control package including: • GEA Ecobraze brazed plate heat exchanger • Grundfos circulation pump • Samson steam control valve • Samson on/off valve • Spirax steam equipment • Expansion vessel with safety module • Temperature instrumentation• Pressure gauge 5. CIP Dosing System Integrated CIP dosing and cleaning section including: • Dosing pump • Suction lances with level sensors • Distribution valves • Water shut-off valve • Water reducing valve Designed for automated cleaning and sanitization of the process line. 6. Automation & Control Fully automated process control system including: • Siemens S7-315 PLC • Siemens MP277 10" HMI touch panel • Profibus / Ethernet communication • Automatic thermization control • Automatic CIP control • Alarm management • Process parameter monitoring • Data recording functionality • Festo pneumatic valve island • Stainless steel control cabinets Automation Level • Fully automatic production operation • Fully automatic CIP operation ...

Condition: used, Pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, slide, Permaflex pinch valve, hose pinch valve -Manufacturer: Prema-Service, PQV - pneumatic pinch valve -Type: PQV DN 125 -Hole circle: Ø 210 x 18 mm Isdjpumagjpfx Acljif -Quantity: 5x valves available -Price per piece -Dimensions: 350/270/H250 mm -Weight: 17kg/piece