Used Valpres Ball Valve for sale (8,830)

Condition: good (used), - Capacity: approx. 4,500 liters - Filling quantity: approx. 3,000 - 3,500 kg - Equipped with a slow-speed special agitator Equipment: - Bottom outlet: ball valve, DN 65 - Clear outlet: DN 40 - Oval manhole - Drain valve - Level indicator - Dome, DN 300 Itodpfxszc H Ufj Afvjk - In good condition Dimensions: Diameter: 1,700 mm Height of curved bottom: 200 mm Shell height: 2,000 mm Overall height: approx. 2,800 mm

Condition: good (used), functionality: fully functional, A fuel transfer device is being offered for sale. Inspection possible by appointment. Manufacturer: GL GmbH Metall- und Werkstattechnik − Model: 100/100 S − Serial number: 3448 Iedext H Ilopfx Afvjtk − Year of manufacture: 08/2017 − Technical data: > Tank capacity: 100 litres > Delivery rate: 15 l/min > Weight: 92 kg > Fill level indicator: visual > Mobility: mobile > Switching suction/return filling: Single-lever operation/ball valve > Tank change: manual

Condition: used, mileage: 547,604 km, power: 338 kW (459.55 HP), first registration: 08/2003, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, brakes: retarder, gearing type: mechanical, emission class: euro3, Equipment: parking heater, Well-maintained MAN 27.460 suction/flushing combination unit from Müller, Canalmaster F130 EG, with a remote control, a telescopic boom, and a Rottec Tec 200 vacuum pump with a Uraca high-pressure pump (P3-45/60). - Müller combination suction/high-pressure flushing unit - Canalmaster F130 EG - Rottec Tec 200 vacuum pump, rotary compressor vacuum pump, water-cooled - Max. 1500 rpm, 1170 m3/h max. flow rate with free passage - Uraca P3-45 high-pressure pump with 205 bar and 330 l/min - Piston extension – pneumatic - Combination cassette boom - Remote control - Tank capacity: 13,000 liters - 10,500 liters sludge - 2,500 liters fresh water - Discharge/emptying piston as an adjustable partition between sludge and water chamber (3-stage pneumatically adjustable) - Suction/emptying nozzle DN 100 (shut-off slide valve) - Ball valve as a second shut-off valve on the outside. Level indicator on the rear side - Flushing system: HD hose reel DN 25, hydraulically swivelable approx. 180° to the left - HD hose reel DN 13 - Cassette boom: Suction hose cassette DN 100, hydraulically extendable approx. 1250 mm - Approx. 17 m hose length, approx. 8 m lifting height. Connection arm fittings with tanker couplings (brass) DN 100 - Storage compartments: Hoses on both sides, tool/equipment cabinets with approx. 140 liters capacity - 6x2 drive axles - German vehicle, second owner - Leaf spring suspension - Air-suspended cab - Cruise control - Differential locks Itsdpfx Ajzuq U Ejfvek - Radio - Auxiliary heater - Bed - Dual H-shift transmission - Financing available through our partner banks; we will gladly assist you. We expressly reserve the right to sell the item in the meantime, as we also offer it on other platforms. Information on accessories is without guarantee. Subject to change, prior sale, and errors. We strongly recommend and encourage an inspection and assessment to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and assessments are possible and expressly desired by appointment.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Itedpsq Nx Alsfx Afvjk Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, pneumatic pinch valve, disc valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve -Material -pinch valve pneumatic -Connection: DN125 -Width: 180 mm -Nominal pressure: PN16 -Quantity: 2 pieces available -Price: per piece -Dimensions: 251/265/H345 mm Itedpfxedyk A Ej Afvjk -Weight: 20 kg/piece

Condition: used, functionality: fully functional, 1. BALL RECIRCULATING UNIT KUVE20-B-1947 PART NO.: 386954 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: FR 2. WATER MANIFOLD COMPLETE PART NO.: 1996899 1 SET Machine: T3030 L20 3. WELDING HEAD WS OPTICS 1 SET Machine: T3030 L20 4. CUTTING HEAD LENS 250 D40 – 17616 PART NO.: 1497234 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: DE Ijdpfox Uzblex Afvjtk 5. (R)GRID VOLTAGE UNIT PART NO.: 0983675 1 PC. Machine: T3030 L20 6. BELLOWS Y-AXIS 93614-102-40 PART NO.: 0141394 1 PC. Machine: T3030 L20 7. EXPANSION VALVE TGEN 25TR MOP70 R134a PART NO.: 1627195 1 PC. Machine: 3030 6kW 8. BELLOWS X-AXIS 1854032 PART NO.: 606083 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: IT 9. TRIODE UP TO 4KW RS3021CJ PART NO.: 903994 1 PC. Machine: T3030 BRAND: THALES 10. FILTERS 8 PCS. Machine: T3030 11. BELLOWS Y-AXIS PART NO.: 1226193 1 PC. Machine: T3030 5kW 12. DISK BELLOWS Y-AXIS PART NO.: 1353514 1 PC. Machine: T3030 5kW 13. BOX BELLOWS PART NO.: 0978079 1 PC. Machine: T3030 5kW

Condition: good (used), Used stainless steel pressure vessel Item number: 10471 Last application: Cosmetics Volume: approx. 750 liters Type: Standing on 4 rollers with galvanized forklift tunnel Material (in contact with the medium): 1.4301 stainless steel Design: Single-walled Bottom: Conical bottom Top: Arched Operating pressure according to nameplate: +2.2 bar Dimensions of the vessel: Outer diameter: 980 mm Height of legs: 190 mm Distance from outlet to bottom: 180 mm Overall height: 1750 mm Overall width: 1170 mm Overall length: 1000 mm Materials: Inside: 1.4301 / AISI304 Outside: 1.4301 / AISI304 Equipment: Outlet: DN32 mm Outlet type: Ball valve Manhole: 355 mm Iedpfx Afsfdgrqjvjtk Various connections Forklift tunnel

Condition: used, axle configuration: 2 axles, first registration: 03/2023, Equipment: ABS, Equipment: Sliding trailer 20 S * Dimensions and weights * External overall length approx. 7,055 mm * Overall width approx. 2,500 mm * Laden height approx. 1,150 mm * Roller track length approx. 6,890 mm * Wheelbase 5,240 mm * Unladen weight approx. 3,460 kg * Technically permissible total weight approx. 20,000 kg * Permissible total weight approx. 18,000 kg * Payload approx. 14,540 kg * Designed for containers with a length of 5,000 to 7,000 mm according to DIN 30722. * (Technical changes reserved.) * Chassis: * Chassis construction made of welded I-beams in QSTE steel * 4 container locking devices and upper sliding frame locking device, pneumatically operated * Side protection device according to RL 89/297/EWG, closed (position 2) * Bogie: * Bogie 980 FM including ball bearing turntable 90/1100/22 (low maintenance) Itedpfxsy Trycs Afvok * Drawbar: * Drawbar 2600/980/100/30, inclined drawbar pin * with height adjustment (coil spring with locking mechanism) * Drawbar with DIN drawbar pin, internal diameter D=40mm, external diameter D=110, thickness 30mm * Axles: * 2 x 10 t axles for 19.5 disc brakes, ET 138, manufacturer at manufacturer's choice. * Disc brake diameter approx. 370mm, * Wheel fastening by center centering according to DIN 74 361 Part 3. * Braking system: * Air brake system according to EU directive with interlock-proof * Duomatik coupling head * Conventional air suspension system, * EBS Type 4S/3M, electronic braking system with ROLL Stability, * Double-diaphragm spring accumulator cylinder on the rear axle, * Release valve for separate release of the spring accumulator brake. * Lighting system: * Lighting system 24 Volt, full LED according to RL 76/756/EWG with multi-chamber lamp * (Hella) and license plate lights integrated into the light panel * 1 x 15-pole plug connection * 6 LED side marker reflector lights * 2 LED outline lights, white, at the front * 2 LED position lights at the rear, separately mounted * 1 reversing light (position 3) * Tires: * Regional traffic tires, tire manufacturer at manufacturer's choice * 8-ply 265/70R19.5 (7.5x19.5) * Steel wheels ET 138, wheel nuts unpainted * Underrun protection: * TÜV-tested underrun protection made of aluminum. * Two vertical delta-shaped impact protection profiles serve to protect the rear during * loading and unloading. * Accessories: * 4 plastic fenders, half-shells at the front and rear, single-wheel fenders * 4 anti-spray mud flaps * 1 lockable plastic toolbox * 1 chock with holder * 1 license plate holder * 1 A-sign for the transport of waste materials * 1 net box (position 4) * 2 container guides * 3 small EBB stickers (position 5) * Painting: * Chassis color: MB 7350 Novagrau * Upper sliding frame: MB 7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 silver * Contouring marking at the rear: red * Contouring marking on the side: white * SSE: RAL 7001 Silbergrau (position 6) * Rear panel/light panels: RAL 7001 Silbergrau (position 6) * Underrun protection: aluminum-anodized (silver) * Locking hooks, container guides: yellow * Documentation: * Included in the scope of delivery: * Commissioning and brake test report * Operating instructions * Maintenance instructions from axle manufacturer * Spare wheel holder removed All information without guarantee. Errors and omissions excepted. Subject to prior sale.

Condition: used, machine/vehicle number: WFDFLT21301003569, empty load weight: 2,400 kg, maximum load weight: 11,000 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 03/2014, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer to our choice for 2 kingpins with ball bearing swivel, stop max. 20°, telescopic support leg, 2 chock blocks with holder, steel underrun protection, half-shell mudguards. CLG drawbar with tested 50 mm towing eyes for the dolly and the tractor unit. BPW disc brake axles, air suspension with lift and lower valve. 2-line pneumatic brake system, spring-loaded parking brake, Duomatic coupling head at the front, with connection lines to the tractor unit, 2 fail-safe coupling heads for the semi-trailer. EBS, electronic brake system with EBS plug at the front, with connection cable, CAN router, EBS connection cable to the semi-trailer. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! Axle load recognition for trucks via EBS, not installed. 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, 2 white position lights at the front in LED. 2 white/red marker lights at the rear in LED, 1 x 15-pole plug at the front, with connection cable to the truck, 1 x 15-pole plug with connection cable to the semi-trailer, cable routing for camera system. Ijdpfx Afsi Rizmovetk Country of registration: Germany, with Dekra approval, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Fifth wheel height approx.: 1150 mm.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,950 kg, maximum load weight: 15,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,080 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy arms based on 20" dimensions for 7.15 m and 7.45 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center measuring approx. 200 mm in length and 800 mm in width! Swivel mount with heavy-duty ball bearing swivel ring Wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Quarter-shell fenders in front and half-shell fenders in the rear Includes mud flaps for fenders Large Fliegl mud flap mounted transversely on the underrun protection at the rear *Trailer coupling system (turntable) Drawbar with certified 40 mm drawbar eye *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake Isdpjzfp S Dofx Afvjtk 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lift & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly “TPMS” tire pressure monitoring system according to ECE R 141, display in the towing vehicle via EBS *Wheels and tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, multi-chamber lights, yellow LED side lighting Yellow LED side lighting linked to the turn signals “Flashing side lights” 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, additional LED work light(s) at the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of registration/license plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Chassis galvanized or painted in colour of choice

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2, First registration: 06/30/2026. New tractor with dealer pre-delivery registration. Standard equipment / technical data: Engine, Rated power (ISO) 82 / 110 kW/hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - single-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-sensing reversing shuttle, 4-stage load shifting, Permanently cooled wet disc clutches with independent lubrication system, Dual-speed PTO: 540 / 540E / 1000, PTO switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / Lift: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single/double acting, MR + 1x single/double acting, NL, SST, Quick coupler Cat. 3 with balls and catch baskets Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lift struts on both sides and 2 lateral stabilizers, EHR with external control on both fenders. Electrical equipment: Thermo start, 120 A alternator, Battery disconnect switch (electrical), Power supply (12 Volt) for external devices with plug. Axles / Additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Height-adjustable automatic trailer hitch, Fenders, external width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Driver's seat: Low-vibration mounted standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver's seat with armrests, swivel adapter, safety belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Ijdpoyvmq Isfx Afvotk Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplings, 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Co-driver/passenger seat with belt, Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter & armrests, Rear window wiper/washer system, Battery.

Condition: good (used), Used stainless steel pressure vessel with insulation and electric heating. Article number: 10467 Quantity: 15 pieces Last application: Cosmetics Volume: approx. 350 liters Type: Standing on 4 rollers with forklift tunnel Material (in contact with media): 1.4301 stainless steel Design: Single-walled with insulation Bottom: Conical bottom Top: Arched Ijdpfx Afefdgrlovjtk Operating pressure according to nameplate: +3 bar Vessel dimensions: Outer diameter: 740 mm Height of feet: 190 mm Distance from outlet to bottom: 190 mm Overall height: 1850 mm Overall width: 960 mm Overall length: 740 mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Features: Outlet: DN32mm Outlet type: Ball valve Manhole: 645 mm Various connections Electric heating, not tested Forklift tunnel

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover Iodpfx Afevlpctjvstk a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: used, machine/vehicle number: WFDFLT21301008306, empty load weight: 2,000 kg, maximum load weight: 11,400 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2018, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer's choice for 2 kingpins, with ball bearing swivel, stop max. 20°, lockable, support on the drawbar, shims with holder, steel underride guard, quarter-panel fenders in front of and behind the axle assembly, with tarpaulin cover for empty journeys. CLG lower coupling drawbar with tested 50 mm towing eyes for the dolly and the tractor unit. BPW disc brake axles with 370 mm disc diameter, air suspension with raise and lower valve. 2-line compressed air braking system, spring brake parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, 2 keyed coupling heads for the semi-trailer, incl. connecting spiral cable. EBS manufacturer Wabco, electronic braking system, with CAN router, with EBS plug at the front, with connection cable. EBS connection cable to the semi-trailer. Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Axle load recognition for trucks via EBS, not installed for trucks. 24 Volt, 4 x 3-chamber lights + 1 round rear fog light, yellow LED side lighting, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin plug at the front, with connection cable to the tractor unit, 1 x 15-pin socket, with connecting spiral cable to the semi-trailer, cable for reversing camera system with socket, additional LED work lights at the rear, switched via reversing light. Itedpfx Afei Riyaevjk Country of registration: Germany, with Dekra inspection, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Fifth wheel height approx.: 950 mm.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Isdpfxezd Eyno Afvstk Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 41 mm, saw band length: 6,880 mm, Fully automatic horizontal mitre saw for cuts from +60° to -60°, equipped with Siemens control system and 2000 mm material feeder - Dual-column guided horizontal bandsaw for cutting solid bars and bar profiles - Siemens S7-1500 control with extensive functionality, operated via a 7'' touchscreen display - Standard with 2000 mm material feeder -> frequency-controlled feed via ball screw and servomotor - Material database with preset sawing parameters and characteristic curves - Sawing movement via ball screw and servomotor - With ARP (automatic cutting feed regulation) -> automatic saw blade feed based on material resistance. The feed rate is continuously adjusted to the current cutting load. ARP enables shorter processing times and longer saw blade service life. - Automatic positioning after entering the desired angle - Hydraulic clamping of the turntable allows for precise angle cuts - Robust machine frame and minimal distances between the saw blade, machine guideways, and workpiece minimize vibrations for optimal cutting performance - Infinitely variable cutting speed from 15 to 150 m/min - Saw drive via bevel gearbox, asynchronous motor, and frequency inverter - For straight cuts, clamping of the material before and after the cut via split vise - Adjustment of hydraulic vise pressure via a control valve with pressure gauge - 7° saw blade inclination and hydraulic band tension increase blade service life Itsdex Uk Arepfx Afvsk - Front blade guide automatically moves parallel to the movable vise jaw - Swarf removal brush driven by blade wheel - Emulsion cooling with fluid distribution to the blade guides and directly into the cutting channel - LEUZE safety light barrier in front of the machine and material feeder - More powerful motor available as an option - Blade guides with integrated cooling system

Condition: used, Used stainless steel container / transport container Containers are cleaned and checked for leaks! Last intended use: Chemicals Article number: 10424 7 pieces available Volume: 1000 L Type: Standing in a galvanized frame Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Bottom: Arched Top: Arched Operating pressure according to nameplate: +0.33 bar Container dimensions: Manhole: 455mm Cylindrical height: 1000mm / 930mm Total width: 1200mm Total length: 1100mm Total height: 1700mm Distance from drain to floor: 240mm Materials: Inside: 1.4301 / AISI 304 Frame: Galvanized steel Itsdpfsv Duppox Afvok Facilities: Nameplate: Yes Outlet diameter: 540mm / 730mm Outlet Type: Ball valve / disc valve

Condition: new, Year of construction: 2025, Spray cleaning system, type S80 (special edition) Robustly designed parts cleaning system with basket drive via gear motor, made of stainless steel 1.4301, - 3-sided arrangement of nozzles made of stainless steel, including stainless steel wide-spray nozzles - completely made of stainless steel, externally powder-coated in RAL 7016 - automatic steam extraction fan Itsdpfx Afspm Ed Eovek - coarse filter (removable basket) in the return line - HMI for program setting - complete insulation of tank and lid - electronic/mechanical lid monitoring - washing pump made of stainless steel (manufacturer: Lowara) - pressure regulation of the washing pump including pressure gauge - level sensors / dry-run protection - drain connection with ball valve - mobile version on rollers - basket diameter: 780 mm - usable height: 430 mm - max. load weight: 100 kg - spray pressure: 3 bar - tank volume: 130 liters - heating: electrically adjustable (RT - 80°C) - connection power (electrical): approx. 6.5 kW - system dimensions (W x D x H): 1,050 x 1,112 x 1,850 (h) mm (with lid open)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension Itodpfx Afjzd Uvljvok BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm]: 3550 Press force [t]: 400 Control: Cybelec ModEva 10s Operating hours [h]: 94,201 Standard equipment: - Robust machine frame as all-steel, welded construction - Ram with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system - CNC back gauge for X and R axes, safe finger adjustment from the front via safety interlock - EHT upper tool clamping system, manual, head width 26mm, max. load 3000 kN/m - EHT lower tool clamping, manual, clamping width 90mm for block and 13mm for single V-dies, without clamping - Control: CYBELEC ModEva 10S on Windows, 2D graphical control with 10.4" color display - Control cabinet air conditioning + Back gauge - System 1, 5 axes, straight fingers, 140mm width, R-axis travel 150mm + EHT quick-clamp device for upper tools, pneumatic, head width 26mm, max. load 3000 kN/m (self-centering horizontally) + EHT pneumatic lower tool clamping, clamping width 55mm + Hardened insert strip for EHT lower tool clamping 55mm / 90mm + CNC-controlled lower tool shifting, stepless positioning via back gauge 1 (max. working length 4550 mm) + CNC-controlled crowning device integrated in table, without tool clamping, max. load 3000 kN/m + Lazersafe safety system (for max. upper tool height 440mm) + Additional foot switch Isdpfxoy Sauro Afvetk + Bending aid, 1st arm, max. load 1500N, with 2 integrated standard support rails + Bending aid, 2nd arm, max. load 1500N, with 2 integrated standard support rails + 2 support rails for a bending aid with 14mm T-slot, ruler, and ball rollers + 2 table extensions for bending aid + Left short park position + Right short park position

Condition: used, Year of construction: 2006, Related document 3v-cogeim-plan-dessin.jpeg Technical description 316L stainless steel Closed cartridge filter Working pressure : -1 / +6 Bar. Working temperature : -10 / +140 °C Capacity : 1130 L Iodpox R Amzefx Afvetk Atex unit : Ex II 2G IIB Equipments on the equipment : Input for level indicator Wash nozzles x 16 Wash balls x 2 Top air wash nozzles with Novaseptic Valve Membrane X3 Window x 2 Filter Cartridges 5 μm x 12

Condition: new, Year of construction: 2024, R5 RA 1600 B 4EB XXXZ 4.00 PCS 05.12.2023 25,000.00 / 1 PCS 100,000.00 Explosion protection Ex Inside II 2G Ex h IIB T3 Gb X Outside II 3G Ex h IIB T3 Gc X Without motor Ex B5-550 d65 50/60Hz Coupling PKZ 20 ATEX Oil separator with: - Antistatic venting element - G3/4 for thermostat probe Heat exchanger 41.2kW without air cooler Base frame with bore d50 Vibration dampers 4xd100 + 3xd150 Cooling water inlet G1/2 vertical with temperature controller Water valve, bypass with ball valves, G1/2 coupling Cooling water outlet G1/2 vertical with G1/2 coupling Ball valve DN25 G1 in oil drain Without temperature switch in gas Without temperature switch in oil Without level switch G3/4 Filter differential pressure gauge elevated with angle Thermometer 0-120°C R1/2 with extension Without resistance thermometer PT100 valve side 4 units available Unit price !!!!! Itjdpfx Afjyzbd Tjvjk

Condition: repair required (used), Year of construction: 1998, functionality: limited functionality, turning length: 330 mm, turning diameter: 248 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 370 mm, The machine’s control system is defective. TECHNICAL DETAILS Turning diameter: 248 mm Turning length: 330 mm Travel distance X-axis: 370 mm Travel distance Z-axis: 190 mm Itodpfx Afozul Utevjk Spindle bore: 45 mm Spindle speed: 6,000 rpm Tailstock quill travel: 120 mm MACHINE DETAILS Transformer: 400 V / 200 V EQUIPMENT Integrated CNC control Machine and control as a closed transport unit Linear guides in the X and Z axes Continuously variable AC main spindle drive Programming for constant cutting speed Integrated cold light Power meter for the main spindle drive Controls for automatic, manual operation and CNC programming Central control panel on the right side of the machine High-dynamic three-phase servo motors for the X and Z axes Backlash-free, pre-tensioned precision lead screws for the X and Z axes Automatic central lubrication with electrical monitoring for bed, cross slide and ball screw drives Coolant system with tank, pump, lines and nozzle Electric 12-station turret system MORI SEIKI with automatic direction logic Direct coolant supply through the turret Fixed hydraulic unit for the power chuck Full enclosure of the working area Front sliding door with large viewing window Electrical connection for chip conveyor prepared Data interface V.24 / RS-232-C Control cabinet Freestanding transformer 400 V / 200 V

Condition: new, Year of construction: 2023, First registered: October 5, 2023_____Total weight 22000 kgOwn weight approx. 6000 kg Maximum payload 20000 kgPermissible support load 3000 kg (4000 kg*)Parabolic suspension 24000 kgStandard capacity 12 m³Transport capacity (SAE 221) 16.4 m³Oil requirement 36.7 litersTipping angle 61°Traction requirement 150 HPTowing height 510-550-590 mmFloor width 6 mm HARDOX 450Wall width 6 mm HARDOX 450Side wall height inside 1185 mmFloor length inside 5400 mmTotal length 7280 mmTotal height of the trough without elevation at the front (with standard tires) 3050 mmVehicle width (with standard tires) 2570 mmStandard tires 620/60 R26.5Color Stronga YellowSpeed 40 km/h4000 kg with K-80 ball head couplingStandard equipmentBPW axle, brake 410x180, axle cross-section 150x150mm,WABCO compressed air brake for all wheelsHandbrake24 ton parabolic suspension, 1525 mm distance between axles, spring mounted on axlesSuspension drawbar with rubberball head coupling plate, height adjustable in 3 positionsScrewed-on towing eye, Scharmüller 50mm diameterSupport foot with fast gearTires 620/60 R26.5 Nokian Country KingQuarter fenders front and rearWheel fenders on the sides of the tubRemovable underrun protection at the rear12 V LED lighting systemHydr. opening tailgate with hydr. Valve2 wheel chocks Special equipmentALB brake valves for air brakeAutomatic slack adjuster32t parabolic suspension, 1525 mm distance between axlesSpring-loaded drawbar with leaf springsBall head coupling Scharmüller D-80 mmSteel toolboxSide underrun protectionTwo LED work lights at the rear,Storage location:null Itjdpfx Afjnr D Twsvsk

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Itjdpszicl Esfx Afvjk Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Special features: Cabin structure: in a robust steel construction and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet The control cabinet contains all contactors and fuses with VPS control