Used Veneer Roller Dryer for sale (10,690)

Condition: ready for operation (used), Year of construction: 2007, Output: 144m³/h, operating pressure: 25.5bar, speed: 1500rpm, weight: 132kg. Ijdpfxotpct Ns Akxeif

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Iisdpjzka H Ajfx Akxof

Condition: ready for operation (used), Year of construction: 1999, A dryer Cremona is available. Sections: 6, temperature zones: 2, cooling section: 1, width: 4200mm. Production capacity: approx. 80 sheets/min. Documentation available. An on-site inspection is possible. Iiodpfow I E Dpsx Akxef

Condition: ready for operation (used), Year of construction: 2016, A complete combined gravure/immersion roller system for Chadwick wallpaper rolls is available. Working width: approx. 560mm, substrate: paper/fleece, gravure printing process: water-based, printing units: 7, technical output: 180m/min, realistic output: 140m/min, production output: approx. 13000-15000 rolls/24h. 1) Windmöller & Hölscher 892C unwinder, year of manufacture: approx. 1970s. 2) 7x Chadwick gravure printing units. 3) Under-paper unwinding and gluing station. 4) Lenze pulling station. 5) 2x Saueressig cold embossing stations, year of construction: 1986/1989. 6) 2-section continuous dryer, total length: approx. 8m. 7) Double roller cooling station. 8) Web monitoring system WV-Star 500, year of construction: 2016. 9) Aligning and cutting system Saueressig 200440Y, inscription: G9, year of construction: 1989. 10) Ritter automatic roller machine. 11) Turning station Saueressig 201482Y, year of construction: 1989. 12) Inclined conveyor belt, working width: approx. 1000mm, length: approx. 3000mm. 13) Centralized supply and exhaust air unit SitVerba, year of construction: 2016, supply air fans: 7, exhaust air fan: 1. The entire system was equipped with new direct drives, drive control, system control, control cabinets, piping construction, process air technology, etc. and completely overhauled in 2016. Documentation available. On-site inspection is possible. Iedswqqv Depfx Akxsif

Year of construction: 2016, condition: ready for operation (used), A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible. Iisdpfsxtfgyox Akxof

Year of construction: 2021, condition: ready for operation (used), A continuous drying system ESC for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculated air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. Belt height: 900mm, discharge element length: 500mm, infeed length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Iiodpoy E S E Nefx Akxof

Year of construction: 2020, condition: ready for operation (used), A continuous drying system ESC with an integrated UV intermediate module for printing use is available. Heating chamber: fan type: TRZ 250-3, length: 2000mm, recirculating air volume at 510Pa: 3400m³/h, max. temperature: 80°C, heating capacity: 18kW. Cooling chamber: fan type: TRE 250-3, length: 2000mm, air volume flow: 3400m³/h. UV intermediate module: belt width: 1700mm, emitters: 2, max. emitter power: 120W/cm. Belt height: 900mm, outlet element length: 500mm, inlet length: 1200mm, zone lengths: 2000mm, system width: approx. 2250mm, total length: approx. 10700mm. Documentation available. An on-site inspection is possible. Iijdpfjy E S E Ajx Akxjf

Year of construction: 1999, condition: ready for operation (used), A veneer line Cremona is available. 1) Vertical cutter Cremona, year of manufacture: 1999, working width: 5400mm. Includes lifting device. 2) Dryer Cremona, year of manufacture: 1999, control: Siemens PLC, control year: 2019, working width: 5400mm, vacuum feed width: 5400mm, sections: 6, temperature zones: 2, cooling section: 1. Production capacity: approx. 70 sheets/min. Documentation available. An on-site inspection is possible. Ijdpfx Ajw I E Dvskxjif

Year of construction: 2016, condition: ready for operation (used), A total of five (5) compact Helios granulate dryers with integrated conveying and control are available. Year of manufacture: 4x2016/1x2019, drying hopper volume: 30l, suction lance length: 810mm, drying capacity: approx. 6kg/h, max. drying temperature: 185°C. Machine dimensions X/Y/Z: approx. 420mm/420mm/625mm, weight: approx. 80kg, control: WINneo basic. Including conveying unit with dedusting and dust collection container with filter. Documentation available. An on site inspection is possible. Iodpfxeydp Abo Akxeif

Condition: ready for operation (used), Year of construction: 2013, Offered is a precision sheet metal straightening machine. Material width: 1500mm, material thickness: 1-2mm, suitable for: aluminum, control: Siemens Simatic OP177B. Equipped with roller conveyor discharge frame. Additionally available spare parts: Siemens Control Unit 24V DC (6SL3040-1NB00-0AA0), Siemens compact asynchronous motor 15kW (1PH7133-2DF02-0BA0), Siemens synchronous servo motor (1FK7042-5AK71-1KG0), Siemens Sinamics Basic Line Module (6SL3130-1TE22-0AA0), Siemens Simatic Panel OP177B, INA cam rollers. Weight: approx. 6700kg, overall dimensions X/Y/Z: approx. 2400mm/1600mm/1800mm. Inspection possible by arrangement. Iiodpfsy Uyfvox Akxjf

Year of construction: 2015, condition: ready for operation (used), A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible. Iisdeynltdepfx Akxef

Year of construction: 2020, condition: ready for operation (used), A continuous kiln with rollers suitable for the ceramics and glass industry is available. Clear passage width/height: 700mm/100mm, kiln channel length: 6000mm, cooling zone length: 1600mm, total kiln length: 8000mm, conveying height above floor: 900mm, max. temperature: 850°C, operating temperature: 800°C, total heating capacity: 75kW, number of heating/control groups: 7. Control system: Siemens Simatic HMI, control and automation system: Jumo mTRON 7, operating hours: 23165h. Documentation available. On-site inspection is possible. Iijdpfx Akot R Tq Ijxof

Condition: used, Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible. Isdjzulg Nopfx Akxoif

Condition: used, 3700mm long, 960mm high, and adjustable Storage location: Nattheim Ijdpev Dauqjfx Akxeif

Condition: used, Year of construction: 1985, Cutting length: 3100 mm Cutting height: Adjustable from 0-45 mm Saw unit: Powerful three-phase motor 220/380 volts, 1.8 kW power Clamping bar at the top with a handwheel Iiedpfx Aevvkazokxjf Storage location: Nattheim

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Iisdpfjvvkblsx Akxjf Storage location: Nattheim

Condition: used, Cutting length: 3000 mm Cutting height: adjustable, 0 - 45 mm Saw unit: 1.8 kW Clamping mechanism: operated via handwheel Iiodpfjy Hrzajx Akxef Location: Nattheim

Condition: used, Year of construction: 1995, Stand-outreach: 630 mm, table model. Veneer thickness: 0.4 - 2.0 mm. Feed rate: approx. 7 m/min. Operating voltage: 230 V. Dimensions: 880 x 370 x 480 mm. Weight: 35 kg. Iiedpfx Aoy Hry Nokxef Storage location: Nattheim.

Condition: ready for operation (used), Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible. Iodpszukt Ijfx Akxjif

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 861953, cutting length (max.): 2,050 mm, cutting height (max.): 60 mm, overall weight: 1,600 kg, cutting width at rip fence: 800 mm, Casati TSA/0 2050 Machine Number : 861953 Year of Construction : 1986 Cutting Lenght 2050 Cutting hight 60 Max rear feed width 800mm Min rear feed width 25mm Iedpsztyfqsfx Akxeif

Condition: good (used), Year of construction: 1994, Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 3.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 10 to 46 m/min -Roller width: 250 mm Ijdpfx Ajzn Iw Dskxjif -Roller diameter: 83 mm -Axle spacing: 130 mm -Conveyor length: approx. 2900 mm -Base: height adjustable -Pneumatic equipment: not functioning -Dimensions: 3000/470/H1120 mm -Weight: 281 kg

Condition: used, Year of construction: 2011, Stand-off distance: 920 mm Iodpfezqyx Sox Akxjif Feed rate: 15 m/min

Condition: excellent (used), functionality: fully functional, Kuper ZV800E veneer longitudinal cutting guillotine Cutting width: 800 mm Ijdpfx Ajzrm Txokxeif Cutting height: 55 mm Power supply voltage: 380 V, three-phase, 50 Hz Knife activation: two-hand control for safety Brake motor power: 2.5 kW Year of manufacture: 1998 CE marking

Condition: used, Year of construction: 1995, functionality: fully functional, JOSTING EFS 2300 L is a heavy-duty single-knife veneer guillotine designed for accurate cutting of veneer sheets and veneer packs. The machine has been modernized and upgraded with an electronic positioning and control system, improving cutting accuracy, repeatability and ease of operation. Manufacturer: JOSTING Model: EFS 2300 L Machine type: Veneer Jointing Guillotine / Veneer Pack Cutting Machine Cutting length: 2,300 mm Iiedpfx Akszu Au Doxsf Maximum insertion height: 80 mm Parallel fence range: approx. 20–720 mm* Pressure bar: Hydraulic cylinder with two pressure stages Cutter bar drive: Brake motor, gearbox and crank drive Parallel fence: Motor-driven positioning system Connected load: approx. 7.7 kW Machine footprint with parallel fence: approx. 3,640 × 1,700 mm Machine height: approx. 1,700 mm Net weight: approx. 3,000 kg Modernization INCLUDES: Digital LCD display Electronic measurement display in millimetres Numeric keypad for direct entry of required cutting dimensions Automatic positioning of the parallel back fence Programmable cutting dimensions Cutting sequence / step programming functions Electronic adjustment and positioning controls Start/Stop control directly from the operator panel Manual fine-adjustment controls Centralized operator interface combining machine and positioning functions

Condition: used, Year of construction: 2019, functionality: fully functional, KUPER FWS 1250 Veneer splicing machine for sale! Currently in production, available in January 2027. For joining veneers approximately 0.3–3.0 mm thick. The machine applies a special glue thread in a zigzag pattern, providing strong and tight joints even with wavy veneers. During pressing, the glue thread is embedded into the veneer, eliminating the need for additional sanding. Technical data: Throat depth: 1250 mm Iiodpfxozu Auqj Akxef Feed speeds: 15 / 30 / 45 / 60 m/min Veneer thickness: 0.3–3.0 mm Voltage: 400 V, 50 Hz, 3-phase Compressed air connection: R 1/4" Air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA