Used Veneer Slicer for sale (778)

Condition: like new (used), Treif Breadslicer 4-24MM In good working condition for more information please sent an request Rcodpfeumpg Rjx Ab Reh

Condition: used, Year of construction: 2022, Additional skid Mowing disk with front wing Swath guide left Warning signs / and lighting / Rcsdpfxot Iwfwj Ab Rjh

Condition: used, Year of construction: 2024, Swath guiding device Set of scrapers Mower combination Center suspension Hydraulic / folding of side guard Mower disc with conveyor blade Hydraulic / transport lock CE equipment package Standard PTO shaft mounted / Rcodpfx Abet Eazce Roh

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Rodeq Rb Irspfx Ab Roch cutting length 3100 mm with rear fence

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Rodpfx Abopvk Dis Roch Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Year of construction: 2026, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C Redpsff Agisfx Ab Rsch NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: new, Year of construction: 2024, The Uniq series is a full-fledged base model in our product range and shares all the characteristics that have made the Kündig edge sanding machine renowned in the market as a robust, versatile precision tool. Part of its extremely robust construction is the motor-driven oscillating sanding unit, which offers a maximum oscillation stroke of 90 mm and the possibility of motor-driven inclination of up to 45°. All common edge processing operations can be performed at the up to four sanding stations. Kündig Uniq edge sanding machine, front and rear Ingenious design – the sanding unit The heart of all our edge sanding machines is the sanding unit. It offers a range of intelligent functions and features. For example, in our machines, the sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. The oscillation stroke, as well as the oscillation range, are easily set by pressing a button. Thanks to the flexible adjustment and the large oscillation stroke, sanding belts can be used optimally over their entire width, without laborious adjustment of the worktable height. The oscillation mechanism is driven by a separate motor. The tilting of the sanding unit is also conveniently done using a rotary switch and with the help of its own motor. The unit can be tilted between 90° and 45°. Thanks to the well-thought-out pivoting mechanism, the full oscillation is always available and simultaneous sanding on both sides is possible. The different table heights of the front and rear sanding stations also ensure that the belt is not used at the same height at the same time. Furthermore, the combination of the pivoting mechanism and the different table heights ensures that the distance between the sanding unit and the worktable remains minimal at every angle of inclination. Changing the belt is also quick and easy, taking only seconds. The four sanding stations 1. Sanding station: "Veneer side" The front sanding station is used for the precise calibration of materials and functions like a planing machine. The feed stop is adjusted using a rotary handle to set the material removal to within a tenth of a millimeter. Importantly, the stop is not tilted. The feed stop, sanding pad, and discharge stop are always parallel to each other. Rounding of workpieces is thus excluded. Fine adjustment of the sanding pad for grain compensation or setting to zero between stops and pad is possible via a handwheel. The massive worktable is fitted with sliding pads on this side. 2. Sanding station "Solid wood side" This station is ideal for sanding flat, angled, chamfered, or externally rounded workpieces. Again, the entire sanding unit oscillates. The belt runs across its entire width on a graphite surface that keeps it cool. On the solid wood side, there is also a mitre stop. Rjdpfx Absfig Rwj Rjch Supplied accessories: Half-round table Additional table with sanding rollers Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Edge grinding machine with an overhead feed mechanism What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table, featuring a rubberized feed belt and an overhead pressure bar. This significantly simplifies the grinding and production of bevelled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it provides assistance when processing exceptionally large or small parts. The feed speed can be continuously adjusted between 3 and 15 m/min. A soft conveyor belt at the bottom and rubberized rollers on the upper pressure bar gently convey the material. An optional second, lower conveyor belt is also available. The upper pressure rollers can also be replaced with a rubber band, which is particularly helpful when grinding extremely small parts. Rcsdpfx Ajhqb Rcjb Roh The Uniq-S is recommended as an all-rounder that enables all types of processing – from solid wood to fine veneer edges – with high quality. The continuously adjustable feed speed allows for optimal adaptation to the material. 1. Grinding station: “Veneer side” 2. Grinding station: “Solid wood side” 3. Grinding station: “Additional table” 4. Grinding station: “Half-round table” Location: Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 1986, Equipment: hot water, THROUGH FEED VENEER PRESS LINE, FOR DOOR PRODUCTION Maximum press measures : L 4200 x 1400 mm Heating : Hot water Maximum pressure : 200 ton Glue station : MECMAN 800, spray glue, 8 pc. of spray guns, pump. Has been used for waterproof door production, polysteren on laminate/composite. Total length : Infeed rolls + press + outfeed rolls : 11000 + 5500 + 5000 = 21500 cm Can be examined in working condition Redpfx Asw Ulv Ejb Rsch

Year of construction: 2026, condition: as good as new (ex-display), The VPR-3500 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-3500 press is also swivelable and mobile. Possible applications: Veneering / Form bonding / Encasing… Coating of various profiles (veneer, paper, plastic…). Wood bending: Production of curved and laminated components. Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work area: 3500x1500mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m3/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Available ex warehouse, 54634 Bitburg Rcjdpfx Ajdvldajb Roh - Free loading -

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Rodpedwh E Asfx Ab Rsch Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Rcjdod R Ev Dopfx Ab Rsh Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 1524/1, Ludy machinery for cutting veneer and producing veneer edging. Suitable for the precise cutting of veneer into strips and for preparing edging for furniture manufacturing. Robust construction, simple operation, ideal for production environments. Rsdpfszg Dpajx Ab Rjch

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 141012/1, Equipment: CE marking, The machine is designed for efficient gluing and pressing of veneer edges, with continuous material feeding. It is suitable for carpentry and furniture production, where precise and stable edge processing is required. It features a robust construction, simple operation, and reliable performance. Rcjdpozg Dt Sefx Ab Rsh

Condition: excellent (used), Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, For sale: Ludy Machinery veneer joining machine with winding function. This machine is designed for efficient joining and stacking of veneer strips into a roll. Suitable for processing veneer in the production of plywood, laminated materials, and other woodworking applications. Robust construction, simple operation, and reduced material handling. Rodpezg Dx Isfx Ab Rjch

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Shelf length: 3000 mm Shelf width: 1300 mm 6 hydraulic cylinders, 75 mm Clearance: 400 mm Water heating Rodpozfgarofx Ab Rjch Year of manufacture: 2001 Weight: 3200 kg Overall length: 440 cm Overall width: 190 cm

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,450 mm, travel distance Y-axis: 1,110 mm, travel distance Z-axis: 1,800 mm, number of axes: 3, This 3-axis MASSIVIT 1800 PRO was manufactured in 2019. It features a maximum printing volume of 1,450 × 1,110 × 1,800 mm and a maximum linear printing speed of 300 mm/s. The machine is available with either one or two printing heads, with the two-head configuration available at an additional cost. If you are looking to get high-quality large-scale 3D printing capabilities, consider the MASSIVIT 1800 PRO plastic 3D printer we have for sale. Contact us for further details. Rcjdpoz Hdflofx Ab Reh • Printing technology: Gel Dispensing Printing (GDP) • Printing heads: Two machines available: one equipped with 1 printing head and the other with 2 printing heads. The machine with 2 printing heads is available at an additional cost. • Max build volume (X/Y/Z): 1,450 × 1,110 × 1,800 mm • Max linear printing speed: 300 mm/s • Z-axis printing speed: up to 350 mm/hour (specified for a 1 m diameter cylinder) • Layer thickness / resolution: 1.3 mm (Normal), 1.0 mm (Quality), 0.8 mm (High Resolution) • Special printing modes: Mega-Quality, Variable Resolution, Mold Mode • Supported materials: Dimengel 90 (all-purpose), Dimengel 100 (translucent), Dimengel 300 (transparent) • Material system: Single-material • Software: Integrated software incl. Massivit SMART Pro Slicer and Estimator Tool; advanced slicing algorithms; Mold Mode; Variable Resolution; Mega-Quality • Monitoring & automation: Automatic time-based cleaning; camera on printing head tip; remote monitoring; remote operation/support via computers, tablets, and phones • Current machine status: Two units available; being replaced by new machines. Replacement container ETA 29 Oct 2026; installations expected early November. Both units purged/drained and currently not in operation.

Condition: used, Year of construction: 1997, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Typ 250 R.B.S.EH, total width: 1,300 mm, total length: 3,200 mm, total height: 1,400 mm, trimming length: 2,960 mm, overall weight: 2,500 kg, table length: 25,002,920 mm, table width: 920 mm, table height: 900 mm, STEKO 250 master press, long belt grinder, veneer saw Cutting length 2970. Press 2500 x 1100, 920 for push-through operation Redpjz Ecfhefx Ab Rech Grinding table 2500 x 930 Includes existing grinding belts.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 220 V, The JAC Eco+ 450 (also referenced as the ECH 450/99) is an automatic, mobile bread slicer manufactured by JAC Machines, featuring their patented Intelligent Slicing Control (ISC) system. This machine is suitable for slicing bread with a maximum dimension of 440 x 160 mm. Key Features Intelligent Slicing Control (ISC): An automatic pressure and slicing speed regulation system that adjusts cutting parameters based on bread consistency without requiring manual adjustments. Jacflaps: A specialized mechanism that holds the loaf together securely to make unloading seamless. Loaf Pusher Heights: configurable with Extra low (50mm), Low (80mm), or High (100mm) The slicing thickness is 14 mm. Amperage: 4 A Frequency: 50 Hz Power supply: 230V single phase Blade/Knife Count: 34 knives Working width: 450 mm Rodpfxoz Evime Ab Rsch Blade dimensions: 13 x 0.5 mm steel Max. Loaf dimension: 44 x 31 x 16 cm Motor power: 0.49 kW Noise level during operation: < 70 db Surround environment temperature: 5 to 40°C Surround relative humidity: 30%-95% With metal & plastic crumb tray: 18-liter capacity (accessible via front tilting door); Outside dimensions: length 600 mm x depth 750 mm x height 1300 mm Machine weight 180 kg This machine is in good condition Video: Price Euro 1.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: Rcjdpfx Asyxp Tweb Roh External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min Rjdpfx Asqy Em Tsb Rjch

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Rcodpfx Aoymmgijb Rjh Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: used, Year of construction: 2012, axis stroke (X,Y,Z) 5.910,1.815,655 mm Number of spindle head vertical 14 St. Number of spindles head horizontal 4 St. main drive 12 kW tool taper HSK F63 Number of axles 5 St. Number of tools 20 St. working area 5005 x 1450 x 200 mm Number of working hours 3108 h Masterwood Project 455 L, 5-axis CNC machining center ----- Machine can be viewed while still in operation! Sold ex-site. Dismantling and reinstallation by experienced Masterwood technicians available as an option! The Masterwood Project 455 L is a highly flexible, numerically controlled 5-axis machining center featuring a robust gantry design. It has been specifically developed for the sophisticated, complete processing (drilling, milling, grooving) of solid wood, panel materials, windows, doors, and stairs. Thanks to its extended "L" configuration, the machine offers an exceptionally large working area for extra-long components. Summary of technical specifications: ----- Travel ranges: X = 5,910 mm, Y = 1,815 mm, Z = 655 mm Max. workpiece dimensions: length 5,005 mm, depth 1,450 mm, height 200 mm Max. axis speed: X = 80 m/min | Y = 80 m/min | Z = 25 m/min Work table system: "TUBELESS" (hose-free) work table with vacuum clamping system Number of table beams: 8 table beams (L-version) Positioning aids: 4 workpiece lifting devices (for heavy components) Stops: 8 rear stops, 8 intermediate stops, 1 side stop on each side (right/left) Vacuum pump Main spindle: ----- Milling spindle (main spindle): 12 kW, 5-axis spindle Spindle cooling system: Liquid circulation cooling (for maximum continuous load) Tool holder: HSK-F63 C-axis (rotation): Indexable by ± 360° Fixed drilling head: ----- Total spindles: 19 independent drilling spindles. • Vertical spindles: 7 in the X-direction, 7 in the Y-direction. Rcjdpfxsz Hz Iws Ab Rjh • Horizontal spindles: 2 double spindles in the X-direction, 1 double spindle in the Y-direction. • Spindle spacing: 32 mm standard grid. • Integrated grooving saw: Saw unit in the X-direction, saw blade Ø 125 mm (4,000 rpm). Tool changing system ----- Carousel magazine: 16-position tool changer Additional positions: Linear tool changer with 4 positions on the machine bed for large-format tools (e.g., profile cutters or saw blades up to Ø 350 mm). Control System & Software ----- Hardware: High-performance PC-based control system with a Windows interface and a 17" color TFT monitor. Network: Integrated Ethernet card for easy online connectivity. Software Package: • MasterWork: Graphical programming system (CAD/CAM interface, DXF import, macros). • Master AT: Graphical setup aid for the optimal positioning of vacuum pods and support beams. Remote Maintenance: Equipped for "Teleservice On-Line" for direct online troubleshooting. Accessories: ----- Various vacuum clamping devices 4 solid wood clamps Veneer stops Selected tools as shown (available upon request) ----- Price for the above-mentioned machine available upon request! ----- Further Information:...

Condition: excellent (used), For sale: a Tünkers roller laminator designed for the uniform application of adhesive to paper, cardboard, corrugated board, and other flat materials. This machine is used in bookbinding facilities, printing houses, packaging production plants, and during laminating and coating processes. The machine is equipped with a Hitachi X200 frequency inverter, which allows for smooth adjustment of the roller speed and adaptation of the operating parameters to the type of material being processed. Its robust, industrial design and precise roller arrangement ensure even distribution of adhesive across the entire working width. Technical data: Manufacturer: Tünkers GmbH Country of manufacture: Germany Type: roller laminator / adhesive application machine Electric drive Speed control via Hitachi X200 frequency inverter Motor with PTC thermal protection Metal work table Adjustable roller pressure Machine number: 12/201118/28 Applications The device is intended for: applying adhesive to paper and cardboard, laminating paper onto corrugated board, laminating materials, gluing veneers, packaging production, bookbinding operations, printing applications. Included in the set: Tünkers roller laminator, Hitachi X200 frequency inverter, wiring, Rjdpjz Snacjfx Ab Rech components visible in the photos. Condition The device is used and shows normal signs of wear. It is sold in the exact condition and with the complete set of components as shown in the photos.

Condition: excellent (used), For sale: a glue roller from Karl Tränklein, a renowned German manufacturer of bookbinding machines. This device is designed for the precise and uniform application of glue to paper, cardboard, corrugated board, veneer, and other flat materials. Rcedpfxsz Snahe Ab Rjh The machine is equipped with an electric drive, a metal working roller, and adjustable glue application settings, allowing the operating parameters to be adapted to the type of material being processed. Its robust, heavy-duty construction ensures stability and long-term durability. Technical specifications: Manufacturer: Karl Tränklein Country of origin: Germany Type: glue roller / applicator Drive: electric Power supply: 400 V Adjustable glue application Metal working roller Work table with guides Drip tray for excess glue Heavy-duty, robust construction Applications: bookbinding, printing, packaging production, gluing paper, cardboard, and corrugated board, applying glue to veneer and other flat materials. Condition: used, fully functional. It shows normal signs of wear and tear from use. The visual condition and completeness are consistent with the photos.