Used Vep Construction Machine for sale (76,115)

Condition: used, New: Yes Colour: Silver Applicable material: Bitumen Empty weight: 9.500 kg Cargo space capacity: 50.000 l Productivity: 50 tph BITUMEN TANK (50 TONS) • Tanks capacity shall be 50 tons. • Tanks shall be produced in accordance with TSE and highway commission practices. • The tank shall incorporate a hot oil heating, • Seamless steel drawn pipe serpentine system to heat • The bitumentemperature up to mixer mixing temperature • The fuel tank shall incorporate level and heat indicator, suction nozzle, filling orifice, ventilation system, inspection hatch and drain outlet. • There shall be support legs under the tank and its surface shall be isolated with 50 mm rock wool and covered with 0,80 mm galvanized sheet. 1. HOT OIL GENERATOR • Generator capacity shall be 2 000.000 kcal/h. • The system shall be made according to diesel fuel system. • The generator shall incorporate a 1500 l filling tank. • The generator shall be horizontal, have seamless steel drawn hot oil pipe, double wall and circulation body. • Generator body shall be isolated with 100 mm rock wool and covered with aluminium sheet. • Generator system shall be produced according to manufacture standards and it shall incorporate an expansion tank, degasser, oil filter, valves and full automatic ignition controlled burner, control panel, pomp and necessary safety equipment. • The serpentine be made of min. 30 m2 seamless steel drawn pipe. • The generator shall be equipped with coupled warning system to protect the complete system in case of dangerous situations showing hot oil level or a decrease in heat transfer oil level. • The burner system shall be designed to activate automatically depending on the adjusted operation temperature of the heat transfer oil. • The system shall be produced in the form of a complete package. Dedex D A R Depfx Afnscc

Condition: used, New: Yes Applicable material: Bitumen Empty weight: 16.000 kg Capacity: 10 m^2/h Full Automatic Bitumen Emulsion System 1. COLLOID MILL (10 m3/hour) 1 2. FOAM TANK (5 m3) 1 3. BITUMEN FEEDING PUMP 1 4. FOAM LYE SYSTEM 1 5. PIPE NETWORK AND EQUIPMENTS 1 6. CONTROL PANEL SYSTEM 1 7. CHASSIS 1 FOAM TANK(1 pieces) a) Frame - Box profile - Capacity : 5 m3 - Tank body will be produced of 3 mm AISI 304 stainless steel plate - The welded connections will be manufactured with appropriate stainless stell TIG welding b) Heating - 2’’ stainless steel pipe - Oil input and output pipes will be 1’’ DN50,PN16,DIN 2633 - Tightness test will be done 6 bar pressure. Dsdsx D A Rkopfx Afnecc c) Mixing System - 3 kW 60 d/min rpm mixing motor - Drive will be provided with sprockets - Imperviousness will be obtained at beddings. - Bearings will be SKF or FAG. - The Fixed wings at exteriror walls will be mounted so that dispersion will be increased and a homogeneous structure will be provided. d) Heat displays will be digital and analogue and two outlets will exits. - Bitumen pump capacity will be as max. 8 m3/h bitumen pumping - Will be 7,5 kW 400 r/min reducer motor coupled. - Bitumen counter will be 10 m3/h capacity system. a) Pipes - Will be steel drawn pipes DIN 171175 (DN200,DN150,DN100,DN80,DN65,DN25) - Mill line will be manufactured as 1.5’’ inner pipe, 2’’ out jacket pipe. - Jacket pipes will be welded connection under TSE standarts. - Jumper pipes will be established from appropriate points of 0,5’’. b) Compensatories - DN 50,DN 80, PN 16 200°C c) 3 ways and 2 ways valves with heating - Complied to TSE standarts. - Will provide the conditions of working under high pressure (16 bar) and heat (230 °C) d) Hot Oil Valves - KLINGER or THERMO branded hot oil valve. Heat resistant. - Will be DN 25 PN16, DN65 PN16, DN50 PN16 e) Filter - Will be with 3 mm wire interior reservoir and it will be cleanable often and easy. - The panel will be in type of compiled to IC standarts.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, We offer 2 used screw pumps. Company: Montanbüro GmbH. Machine type: S5/7.5 kW. Year of construction 2017. Fully functional. Dodpfxjvdtagj Afnecc

Condition: excellent (used), functionality: fully functional, fuel type: electric, color: green, operation weight: 9,000 kg, Year of construction: 1976, Description For sale is a well-maintained Schwarz & Wirtz PERFECT WE100 semi-automatic pipe bending machine—a robust and reliable solution renowned for its precision and long service life. The WE100 series is widely utilized in industrial fabrication, shipbuilding, construction, metalworking shops, and piping industries due to its strong bending capacity and dependable performance. This unit is in good working condition and has only operated in a professional workshop setting. All functions have been tested; the machine delivers precise bends even at maximum specifications. Included is a complete set of bending dies and mandrels (doorns) for both SCH40 and SCH80 pipes, making it ready for immediate production use. A demonstration video is available upon request. Technical Specifications Brand / Model: Schwarz & Wirtz PERFECT WE100 Machine Type: Semi-automatic pipe bending machine Maximum Pipe Diameter: DN100 Maximum Wall Thickness: 10 mm Drive / Power: Heavy-duty industrial-grade Bending Capability: Suitable for carbon steel piping, hydraulic piping, gas lines, and industrial tubing Operation: Semi-automatic operation with manual adjustments Condition: Mechanically sound, no functional faults detected Included Tooling (Dies & Mandrels – Complete Set) The machine is supplied with a full tooling package for both Schedule 40 and Schedule 80 pipe bending: Bending Dies + Mandrels (Doorns): - DN50 – SCH40 & SCH80 - DN65 – SCH40 & SCH80 - DN80 – SCH40 & SCH80 - DN100 – SCH40 & SCH80 Dedsxxkcdspfx Afnecc This comprehensive set greatly enhances the machine’s production flexibility and overall value. Highlights & Advantages ✔ Fully operational and tested ✔ Good mechanical condition ✔ Complete die & mandrel set included (rare and valuable) ✔ Heavy-duty bending capacity ✔ Suited for demanding industrial applications ✔ High-quality German manufactured build ✔ Ready for immediate deployment ✔ Operation video available on request Condition Report - Mechanically sound - No electrical issues - Hydraulics operating correctly - Bending accuracy verified - Normal signs of use, no major faults - Always operated indoors in a professional workshop environment

Condition: excellent (used), functionality: fully functional, fuel tank capacity: 10 l, color: original, overall weight: 570 kg, empty load weight: 570 kg, operation weight: 570 kg, lifting power: 150 kg/m, Year of construction: 2015, operating hours: 1,400 h, Equipment: pallet forks, Probst Jumbo-BV-Vario vacuum kerb lifter. In perfect working order but has some age related marks. Very well maintained and regularly serviced. This machine enables the laying of up to 400m of kerbs to be laid daily with just one operator feeding the kerb layer with no manual handling and just moving levers! Honda GXV390 petrol engine which is bullet proof when filters are cleaned regularly. Also available with the machine are Quick Hitch fork attachments to suit a Manitou telehandler and numerous different lifting plates to suit a variety of kerb shapes and sizes. Videos are available of the machine working. Dsdpfx Afsxvqclonscc

Condition: like new (used), Year of construction: 2008, Tipping Device and Concrete Spreader VOLLERT WECKENMAN Dcedpfxjxza Nfs Afnoc Year 2008 Never used Lifting device capacity: 5 tons. With synchronized control Concrete spreader cover: 7.5 tons, with internal blade auger In perfect condition

Condition: good (used), 37 Machine Tools • Years of manufacture 1970–2000 • Well-maintained condition For sale is an extensive selection of machines from a locksmith’s workshop or metalworking company, specializing in special-purpose machine construction. The total lot includes over 40 predominantly conventional machine tools, solid industrial quality, all well maintained and in full working order. Many machines have been repainted in red/blue for company identification, but are technically in good original condition. The package includes, among others: CNC Vertical Machining Center Alzmetall BAZ 15 CNC Universal Milling Machine Wemas WM3 Universal Milling Machine Deckel FP3A Guillotine Shear BRZESKA FABRYKA 2000/3 Mini Excavator / Multi-purpose device “BOBCAT” FAI 336 Two Band Saws Mössner Rekord (large and small) Cold Circular Saw Kaltenbach Mitre Saw with Table K180 Surface Grinders ABA and ST 30/50 Cylindrical Grinder MSO EDM Machine AEG-Elotherm Elbomat 400 Eccentric Press Helmerding TP8 Hydraulic Press FMA Pokorny 60080-01-5 Spindle Press 10 t Grinder Knuth Belt & Disk Sander 102800 Sandblasting Unit Tremor S.A. Vevey Column Jib Crane 500 kg Four Welding Machines TransMIG 400 Pillar Drill Siegfried Franzen Jungheinrich Pallet Stackers (electric high-lift truck) And numerous other machines, workshop equipment, and accessories. Condition: Consistently well-maintained workshop equipment, all machines functionally tested Some machines repainted in company colors (red/blue) Sturdy machines of high-quality German and European manufacture Terms & Logistics Purchase of individual items possible; removal to be handled by the buyer Ideally sold as a complete lot, available immediately, For full lot purchase, we can arrange transport and loading logistics. Viewing by appointment possible Interested? A complete machine list, technical data, photos, and pricing available on request. If you have questions or would like to arrange a viewing, please contact us. Dedpfjxx Tl Ijx Afnecc

Condition: like new (used), functionality: fully functional, Year of construction: 2023, 2 x Steel modular Delta I-V side forms L=30m – 75.000 euro/piece Delta beams: Max length: 30m Max width: 640 (with the possibility to make 620/600/580) Max Height: 125cm (minimum 106cm) Slope: 3% Height 150 in the center and 160 at the start/end 1 x Self reacting prestressing bed 75m x 1,25m. – 175.000 euro PRESTRESS BEDS Dedpex Dbzhofx Afnocc Dimensions: 75m x 1.25m The complete prestressing installation consists of the following elements: the bed, an active stressing head, a passive stressing head, steel end blocks and a set of 2 cylinders 300 Ton optional extended with a hydraulic pump. Useful length of the beds: 75m Width of the beds: 1250 Capacity of beds: 1600T THE ACTIVE STRESSING HEAD Height: 0m40 Width: 0m60 Capacity: 600T / 120T THE PASSIVE STRESSING HEAD Height: 0m40 Width: 0m60 Capacity: 600T / 120T HYDRAULIC CYLINDERS 2 cylinders x 300T Rings foreseen for blocking during loading. Steel calibrator blocks: Dimensions: 1m25 x 0m50 Capacity: 600T Number of holes: 168

Condition: new, power: 1.2 kW (1.63 HP), color: blue, overall weight: 294 kg, maximum load weight: 500 kg, load capacity: 500 kg, Zallys Jack 1200W 1/22 electric tractor is the ideal solution to avoid manual handling of loads and speed up the movement. - for loads up to 500 kg - for towing up to 1500 kg - versatile and compact - with pneumatic wheels for indoor and outdoor use - optional button for 2-speed adjustment - wide range of standard accessories or customizable on request Max. Forward driving speed (standard version) 10 km/h Max. Driving speed forward (with upgrade)12 km/h Max. driving speed Max. driving speed reverse (standard version) 8 km/h Max. driving speed Max. driving speed reverse (with upgrade) 10 km/h Load capacity in level 500 kg Max. Pulling capacity in level (standard version) 500 kg Max. Max. traction capacity in level (with upgrade) 1.500 kg Max. gradient with load *15 Max. tractive force on hook (standard version) 500 N Max. tractive force on hook (with upgrade) 1500 N Braking distance at deceleration (without load) 6 m * Load capacity depends on slope, type of ground and operating time If the force on the hook in N remains the same, the following circumstances can change the tractive force of the machine (specified in kg): the nature of the ground, the use of ballast, and the type of wheels with which the machine and truck are equipped. Batteries 2 Battery type - AGM traction battery 12 V Nominal capacity 5 h - 105 Ah nominal capacity 20 h - 130 Ah Battery weight 33 kg Gearbox mechanical Gearbox 1:25 rear drive electronic service brake electro-mechanical parking brake weight without battery 143 kg empty weight incl. 105/130A AGM batteries 209 kg empty weight incl. 200/240A AGM batteries 267 kg Length 2.000 mm Width 814 mm height handlebar / drawbar 1175 mm seat height / saddle height 860 mm loading area height 510 mm wheelbase 1418 mm turning circle 3200 mm Djdek Dzzkepfx Afnjcc

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears Dcededzp T Djpfx Afnoc (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: new, Year of construction: 2025, New MW2000 / NX-5 model with 360° hydraulic rotator. Self-propelled pile driver for PV farm posts by Mazaka, 9.15 m mast, DEUTZ 85 kW engine! MAZAKA MW2000 / NX-5 • Engine – DEUTZ, Stage V emissions standard • Engine power: 85 kW • Noise level: 109 dBA • Steel tracks HAMMER • Model: MZK65, 1650 Joules • Impact rate: 350-700 blows/min • Oil flow: 70-100 L • Hammer weight: 750 kg HYDRAULIC SYSTEM • Oil tank: 200 L • Oil flow rate: 50-100 L/min • Oil pressure: 225 bar Dsdpfxsw Rvlvo Afnocc • Fuel tank: 120 L UNDERCARRIAGE SYSTEM • Speed 1: 2 km/h, speed 2: 4.4 km/h MAX. POST HEIGHT • Post height: 9,150 mm • Side shift: 100 - 100 mm • Pile cap: 145 x 95 mm included in the machine price (other sizes available at extra cost) TRANSPORT DIMENSIONS • Height: 2,280 mm • Width: 2,280 mm • Length: 3,600 mm • Weight: 7,950 kg • Ground clearance: 500 mm • Mast tilt: +20° / -150° • Side tilt: +15° / -15° 360° ROTATOR • Rotation speed: 0 - 5 rpm • Hydraulic rotator system Net retail price including transport: €215,000.00 Optional equipment (at extra charge): • Automatic levelling system – €4,400 net • Post puller – €2,200.00 net • Rock, concrete, and asphalt auger complete with 203 mm / 6-inch bit and DTH mounting bracket – €18,500 net

Condition: new, functionality: fully functional, Year of construction: 2025, Brand new, self-propelled solar pile driver by Mazaka. The model is designed with a compact chassis – making it ideal for transport and intensive use. Mazaka is a brand recognized by professionals throughout the EU, USA, and Canada. ONE UNIT AVAILABLE IMMEDIATELY FROM STOCK. DISCOUNT POSSIBLE! CONTACT US FOR DETAILS. MAZAKA Self-Propelled Pile Driver MW1200 CW Engine Brand: YANMAR TIER 5, 35.4 kW, Model: 4TNV88C-YDEH2 / EU Stage V Noise level: 108 db Hammer Model: MZKK65 – 1,450 Joules Blow rate: 350–700 bpm Hammer weight: 750 kg Dcjdpfjw Rvinox Afnsc HYDRAULIC SYSTEM Oil tank: 150 L Oil flow: 50–100 L/min Working pressure: 180 bar Fuel tank: 50 L MACHINE SPEED Speed: 2.2 – 4 km/h PANEL HEIGHT Maximum panel height: 6,100 mm Side shift Standard pile head template (other profiles available on request): 125–125 mm / 100–60 mm DIMENSIONS Height: 2,770 mm Width: 2,290 mm Length: 3,660 mm Weight: 4,750 kg Mast tilt: +10° to -63° Side tilt: +10° to -10° FUEL CONSUMPTION Diesel: 2.5–3.5 l/h Retail price including transport Net: €101,000 Optional equipment at extra cost: • Automatic leveling system – €4,100 net • Post puller – €2,000 net • Additional pile head template per buyer’s technical drawing – €1,600 net • Rock, concrete, and asphalt auger with 203 mm bit and DTH 6" mounting kit (drilling depth approx. 1,650 mm in 5–10 min): €16,000 net. Note: Rock drilling requires a 14 bar / 14 m³ compressor (not included). • Auger for soft soil (150 x 1500 mm or 200 x 1500 mm) with rotary head, complete – €4,500 net

Condition: new, Maximum Lifting Capacity: The Krachtarmlift boasts an impressive lifting capacity of 600 kg, allowing heavy loads such as steel beams and lintels to be effortlessly moved and hoisted into position. Ease of Use: Thanks to the simple hand crank operation, loads can be lifted and positioned with minimal effort and with millimeter precision. Safety: Featuring a solid and stable construction, this lift provides maximum safety during operation. Mobility: Fitted with swivel casters, the lift can easily be moved to different locations on the construction site or indoors through door frames. The Krachtarmlift Lintel Lift MUBA is an indispensable tool on any construction site, designed to significantly simplify the lifting and positioning of heavy loads. Renowned for its robust build and user-friendly operation, this lift offers an efficient solution for handling beams, lintels, and other heavy construction materials. Maximum lifting capacity and range: With a load capacity of 600 kg and a maximum height of 2.75 meters (with an optional adapter, the height can be extended to 3.00 m), the Krachtarmlift can lift heavy objects with ease. This makes it ideal for installing lintels and other structural elements at height. Easy to operate: The lift features a smooth and effortless hand crank mechanism, allowing loads to be positioned precisely without excessive physical exertion. The crank is ergonomically designed, ensuring lasting comfort during prolonged use. Safety first: Safety was a critical consideration in the design of the Krachtarmlift. Its robust base ensures stability, even at maximum load. Additionally, the wheels are equipped with brakes, keeping the lift securely in place during operation. Dodpow Eu Hisfx Afnocc Mobility and flexibility: Equipped with swivel casters, the Krachtarmlift can be easily moved by a single person. This makes it simple to transport the lift to various locations on the jobsite, contributing to overall efficiency and flexibility of operations.

Condition: like new (used), functionality: fully functional, For sale is an M18 Milwaukee demonstration set with full warranty. The Power SET consists of: Cordless percussion drill driver M18 FPD3-0X Cordless compact impact wrench 1/2" M18 FIW2F12-0X Cordless angle grinder M18 FSAG125X-0X Cordless circular saw M18 FCS552-0 Cordless reciprocating saw M18 FSZ-0 LED cordless hand lamp M18 TLED-0 Dsdpfjwzlwkjx Afnocc

Condition: good (used), functionality: fully functional, fuel type: diesel, Year of construction: 2016, operating hours: 9 h, Hybrid LED light tower Smart solar battery and diesel power system Brand: Verdegro Type: LLTT-H Year: 2016 Solar power system (350 W) High efficiency LED flood lights. Photocell daylight sensor (automatic/on/off) Spring-driven cable drum Optional: Geo fencing by DSE web interface 7 section vertical tower (steel galvanized) Forklift sprockets on top + below chassis Information LED backlight controller screen Hybrid diesel generator Fuel tank capacity 140 L Drip tray / spill container Dcodpfxswhmqro Afnoc Four telescoping outriggers and leveling jacks Torsion rubber suspension axle

Condition: used, Year of construction: 2005, Rebar line with numerical control, used, in good condition. Dedpfswny Idjx Afnjcc

Condition: excellent (used), functionality: fully functional, empty load weight: 411 kg, digging bucket width: 1,750 mm, Year of construction: 2015, machine/vehicle number: 2015-2222, Cseri, German manufacturer, tiltable ditch cleaning bucket, MS 08 mount, capacity 360 liters. Dcjdpfx Afjw Aguyensc

Condition: used, functionality: fully functional, Year of construction: 2023, machine/vehicle number: SN061476, 12 months warranty, except for the engine. Dcjdpfx Ajw Ia Rwsfnec

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 20 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Special features: Dcjdpfour N Dtjx Afnjc Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: like new (used), functionality: fully functional, overall weight: 640 kg, Year of construction: 2021, operating hours: 15 h, Floor sanding machine Orbiter 800 RC-DSP - CONTEC's most powerful grinding machine with orbital drive for stripping, cleaning or surface preparation surface preparation, sanding and polishing Technical specifications Working width: 800 mm Motor: 400 Volt / 32 A / 15 kW Tool speed: 230 - 825 rpm Discs: 3 x 280 mm Weight: 640 kg Water tank: 20 liters Special features: Dcsdpfxsur N Ais Afnec Integrated feed control with radio remote control On-board computer with grinding recommendation and diamond wear indicator, adjustable grinding pressure, on-board battery board battery" and joystick control for easy transportation. transportation.

Condition: used, Year of construction: 2010, Loading silo for asphalt mixes 270 tons with bucket conveyor - separate loading silo for various asphalt mixes - capacity: 270 tons - with bucket conveyor and bucket Dedpfxjv H R Tpe Afnocc - can be attached to any existing system - control system

Condition: used, functionality: fully functional, mileage: 27,000 km, power: 400 kW (543.85 HP), gearing type: automatic, fuel type: gas, color: grey, overall weight: 800 kg, Year of construction: 2011, operating hours: 27,000 h, machine/vehicle number: MAN E2876 LE 302, E2876 LE 301, Gas CHP (Combined Heat and Power) units, 2 x 195 kW electrical, 2 x 255 kW thermal, fuel consumption 51.6 m³/h. Dcsdpfx Asw D A Ryjfnsc

Condition: used, Year of construction: 2006, machine/vehicle number: 21741076, JCB loader frame, axles, hydraulics. Dcodpev Immusfx Afnjc

Condition: new, functionality: fully functional, empty load weight: 2,800 kg, operation weight: 2,800 kg, Year of construction: 2024, New pulverizer for excavators from 25 - 40 tons. Djdpjwnxr Uefx Afnscc 360 degree rotatable.

Year of construction: 1999, condition: good (used), functionality: fully functional, End milling machine for portal construction ready for use Dcsdpfehzt Nhox Afnec