Used Vertical Packaging Machine for sale (73,446)

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM Dodou Idn Hspfx Ab Njwc clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: used, Year of construction: 1977, Technical details: honing diameter: 125 mm stroke: 500 mm throat: - mm distance table - lower edge spindle: 525 mm grinding spindle speed: 26-1200 (12Steps) U/min honing diameter: 30 (min.) mm honing diameter: 165 (max.) mm table adjustment:: 800/150 (max.) mm table surface area: 500 x 1000 cm total power requirement: 4,22 kW Weight approx.: 0,15 t Dedpfx Absw Rv Tao Newc dimension machine xH: 1,30 x 1,20 x 2,70 m There is a movable table that moves lengthwise and crosswise. ·There is a movable table that travels in both longitudinal and transverse directions. ·Manual lubrication with cooling. ·The machine is capable of honing. ·Pendulum movement in rapid traverse between two adjustable end positions is possible. *

Condition: used, Year of construction: 2004, functionality: fully functional, spindle speed (max.): 12,000 rpm, operating hours of spindle: 21,600 h, For sale is a good, used DMC 64 V linear Working area & travel distances • X-axis: 640 mm • Y-axis: 600 mm • Z-axis: 500 mm Work table • Clamping area: 850 x 600 mm (sometimes also specified as 850 x 630 mm) • Max. table load: 600 kg Milling spindle & drive • Spindle speed: 1 to 12,000 rpm • Spindle power (S1/S6): 13 / 19 kW • Torque: 70 / 100 Nm • Tool holder: SK 40 or BT 40 Feed & dynamics • Rapid traverse rates (X / Y / Z): 60 / 40 / 40 m/min • Feed rate: 0 – 40,000 mm/min • X-axis: Driven by a wear-free linear motor Tool magazine (ATC) Dodpfez Imtujx Ab Nowc • Number of magazine positions: 30 positions • Max. tool diameter: 80 mm (up to 140 mm with free adjacent positions) • Max. tool length: 300 mm • Max. tool weight: 7 kg Controls • SIEMENS: Sinumerik 810D / 840D (ShopMill) Machine dimensions & weight • Machine weight: approx. 6,500 kg • Installation dimensions (L x W x H): approx. 3.40 x 2.50 x 3.30 m

Condition: good (used), functionality: fully functional, Machine with only 3.311 spindle running hours ! * Heidenhain iTNC 530 CNC control * 32-station ATC * Internal coolant system: 20 bar * Coolant tank: 480 l * Chip conveyor * Heidenhain glass scales in X/Y/Z * Oil-cooler * Infrared measuring device Technical details x-travel 1100 mm y-travel 600 mm z-travel 510 mm Dwsdpfxjz D A Hcj Ab Nec Table dimensions 1300 x 600 mm table load 1,0 to tool taper ISO 40 DIN 69871A spindle turning speed range 60 - 12000 rpm rapid traverse 32 m/min power capacity 10 / 17 kW no. of tools in the magazine 32 tool length - max. 300 mm Tool diameter 76 / 127 mm weight of tools max. 8 kg tool changing time 2,5 sec total power requirement 30 kW weight of the machine ca. 8,5 t dimensions of the machine ca. 4400 x 2250 x 2920 mm

Condition: excellent (used), Working travels 1020 x 530 x 560 mm Dwjdpfszmdd Dox Ab Njc Table size 1200 x 500 mm Spindle taper BT40 Spindle speeds -12'000 rpm Tool changer 32 Pos. Control FANUC 0i-MC With cooling through spindle With chip conveyor Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2002, Working travels 600 x 450 x 450 mm Dwsdpfxjzwt Hcs Ab Nsc Table size 850 x 530 mm Spindle taper HSK 63 Spindle speeds -20'000 rpm Tool changer 30 Pos. Control HEIDENHAIN iTNC 530 3D Measuring tracer Tool measurement RENISHAW TS27R Tool breakage control device Tool lenght and diameter measuring device Misc. accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: M+ Mazatrol, table load: 1,000 kg, TECHNICAL DETAILS Travel in the X-axis: 1,660 mm Travel in the Y-axis: 510 mm Travel in the Z-axis: 510 mm Table dimensions: 2,000 × 510 mm Table load capacity: max. 1,000 kg Spindle speed: 7,000 rpm Tool holder: SK 40 Tool magazine: 48 tools MACHINE DETAILS Dedpfez Ahw Hjx Ab Nowc Control system: M+ Mazatrol Machine weight approx.: 7,500 kg Space requirement approx.: 5 m² EQUIPMENT Chip conveyor: MAYFRAN 4th axis: Tilting rotary table: Rotamatik RM 100

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z; 1300 x 670 x 625mm, Table size 1500 x 670mm, maximum table load 1300 kgs. min-max height spindle to table 150-775mm, spindle speed 12,000rpm, spindle taper BT40, 30 station ATC spindle power 18.5 Kw, Fanuc OI series control, Through spindle coolant. Djdpfx Abozzzwqj Nswc

Condition: ready for operation (used), Year of construction: 2007, Make: SPINNER Dwjdpjz I Nlyofx Ab Noc Type of machine: MC 650 Year of manufacture: 2007 Control system: Siemens 810 D Machine's weight: 9500 kg Tool holder: SK 40 x-travel: 650 mm y-travel: 450 mm z-travel: 460 mm Speed range: 8000 1/min Overall dimensions: 3,6 × 2,2 × 3,0 m Table dimensions: 710x450 mm Number of tools in the magazine: 32 Pl.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, X travel: 2000 mm Y travel: 500 mm Z travel: 500 mm Control: Siemens 840 D Feed rate – fine adjustment: 1-8000 mm/min Table size: 2120 x 500 mm Table load: 2000 kp Rapid traverse X-axis: 40 m/min Rapid traverse Z-axis: 20 m/min Tool holder: HSK 63 A Djdpfx Abjz Izbae Nswc Spindle speeds – stepless: 0-15000 rpm Spindle drive: 20 kW Spindle bearing diameter: 70 mm Tool diameter: 63 /126 mm Tool magazine: 40 pcs Weight: 12 t Total power requirement: 65 kVA - Equipment: chip conveyor

Condition: used, A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment. Dsdpjz Hzd Sefx Ab Njwc

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK Dodoyztyaspfx Ab Nswc - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Condition: good (used), Year of construction: 2001, Vertical machining center Machine type: Hermle U 630 T Control: Heidenhain TNC 426 Year: 2000 SPECIFICATIONS Travel X-Axis: 875 mm Y-Axis: 500 mm Z-Axis: 500 mm Panning head: 90° quill range: 75 mm Spindle speeds: 7.000 rpm Tool: SK 40 Tool capacity: 16 Table size: 900 x 528 mm Dwsdpjziy Nusfx Ab Noc Equipment

Condition: used, Year of construction: 2007, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Dwedjzvhmzjpfx Ab Nec

Condition: good (used), GEA Aquarius CX360 bagging machine direct from salad packing line. Nice condition. Dwedpfxswztmto Ab Njc

Condition: new, Year of construction: 2023, operating hours: 10 h, !! We would be happy to advise you!! Model name ////: Rotection cartoner Features ////: Double servo feed control, with hot melt station, safety enclosure and safety technology Production orientation ////: Horizontal Conveyor system ////: Fan conveyor belt Carton feed ////: top with active conveyor belt Operator display ////: Touchscreen Dsdpfjr E Dpaox Ab Newc Drives & control ////: 8 servo motors and PLC control Box length ////: 150-300 mm Box width ////: 120-260 mm Packaging height ////: 50-100 mm Speed ////: 40-60 boxes/min. depending on box size and product weight Recommended cardboard box ////: pre-folded boxes, 250-350g/m³ Consumption ////: approx. 9.5KW Power supply ////: 380 V / 50 Hz/ 3-phase System weight ////: approx. 1000 kg System dimensions ////: approx. 4257 x 1605 x 1823 mm System material ////: "304 stainless steel with surface treatment" Hot melt station ////: Required, optional Nordson or Robatech

Condition: good (used), Year of construction: 1998, Deckel Maho 5 axis vertical machining center in good condition with only ca 8600 spindle hours. Fully simultaneous 5 axis machining, controlled with CAM system. Heidenhain TNC426 control, 12000 rpm spindle speed and 30 positions in tool (SK40) magazine READY FOR IMMEDIATE DELIVERY. Travel X 800mm Travel Y 700mm Travel Z 600mm Max spindle speed 12000 rpm Dwjdpsz Hbn Refx Ab Nsc Tool changer/magazine SK40 Working spindle SK Places in tool magazine 30 Control Heidenhain TNC426 Rapid traverse X, Y and Z axis 24 m/min Spindel hours 8400 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: used, Technical details: x-travel: 880 mm y-travel: 300 mm z-travel: 900 mm w-axis: 60 mm spindle head swivable left - right: 60 ° table surface area: 880 x 300 mm machine weight approx.: 1200 kg dimension machine xH: 1,3 x 1,4 x 1,9 m Dodpfxsu Ndfhe Ab Njwc incl. accessories *

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie Dwodpfx Aboz I Uxro Noc - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of working hours : 18751 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : GAUCHE

Condition: used, Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system with LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit, transparent protective enclosure and connected conveyor belt. Inspection possible by arrangement. Dwjdez N Ha Eopfx Ab Njc

Condition: used, Year of construction: 1981, Technical details: x-travel: 400 mm y-travel: 420 mm z-travel: 380 mm table surface area: 710 x 400 mm max. table load: 120 kg range of revolution per miute: 45 - 2240 / 18 step U/min feed continuous: 6,3 - 600 / 2 steples mm/min quill stroke vertical: 100 mm quill stroke: horizontal: 100 mm spindle taper: vertical/horizontal: SK 40/SK40 spindle head swivable left - right: 90 ° distance table/horizontal spindle: min./max.: 200 / 325 mm distance table/vertical head: min./max.: 150 / 730 mm total power requirement: 5,5 kW weight of the machine ca.: 1,95 kg machine dimensions LxWxH: 1,7 x 1,4 x 1,9 m dimensions electric cabinet: 850x500x1500 mm The milling machine is equipped with a 3-measuring path display. incl. machine feet and operating instructions * Djdpou Nc Hksfx Ab Nswc

Condition: excellent (used), Year of construction: 2023, Traverses X Y Z: 2134 x 813 x 762mm, Table 2134 x 711mm, Spindle Speed 0 – 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, Dsdpfx Ajzzppueb Nswc HAAS Control, 30 Station ATC, coolant, WIPS, low volt light, and 4th axis.

Condition: used, Year of construction: 2003, turning diameter 340 mm swing diameter 420 mm turning height 315 mm Dwjdpsz At Ukefx Ab Nsc Control S 840 DSL x-travel 850 mm z-travel 315 mm spindle turning speed - stepless 0- 3400 U/min main drive 37(48) kW feed in x - axis 0- 45 m/min feed range Z-direction 0- 30 m/min work piece power 19 kW toolpiece turning speed range 0- 6000 U/min total power requirement 60 kW weight of the machine ca. 10 t dimensions of the machine ca. 3,7 x 3,1 x 3,3 m Machine is offered without chuck but with 12 pieces tool holders Capto 5.

Condition: used, Year of construction: 2011, x-travel 762 mm y-travel 460 mm z-travel 460 mm table surface area 1.000 x 460 mm control Okuma OSP 20 M rapid traverse 40/40/32 m/min table load 0,7 t turning speed range 12000 U/min power capacity - milling spindle 22/18,5 kW max. torque on the spindle 198 Nm no. of tools in the magazine 32 Stück internal coolant system feed 20/43 bar tool taper BT 40 weight of the machine ca. 6,8 t dimensions 2.22 x 2,9 x 2,75 m CNC- vertical machining centre with internal coolant First installation 2014 - coolant through the spindel 15 bar, 20 ltr/min - air throug the spindle - chip conveyor - signal lamp - Dual tool change arm - external electric hand weel - tool lenght measuring and toolbreak detection - filter system - X- axis in gantry style - spindle oil cooler - thermal compensation spindel and bed - USB and Ethernet port - Hi-Cut Pro high speed control Djdpfez Nn Azsx Ab Njwc - 100 Zero offsets - thread milling

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm Djdpfxjz Hq Aks Ab Nswc - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.