Used Vertical Packaging Machine for sale (73,446)

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC370, overall weight: 3,600 kg, spindle nose: SK40, Equipment: documentation/manual, Bridgeport VMC1000-22 Djdjz Iugcepfx Ab Nowc Heidenhain TNC370 control X-Y-Z 1020-520-500 mm 6.000rpm SK40 22 Toolchanger Built 6-1996 Machine is under power

Condition: good (used), Fully automatic MOSCA strapping machine RO-TR 700-2 Manufacturer: Gerd Mosca GmbH Type: RO-TR700-2 PLC control Control panel for setting operating modes, strapping intervals, and band tension Automatic PP bands, widths 5, 6, 7, 8, 9, or 12 mm Operating voltage: 400 V 3AC Current consumption: 3 A Dwedjtzbhcopfx Ab Noc Power: 2.1 kW Frequency: 50 Hz Rollers: four swivel rollers, two of which can be locked Overall dimensions: approx. 1350 x 1200 x 1650 mm (W x D x H) You can find other items in different sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1995, x-travel 650 mm Dwedpozz S R Usfx Ab Noc y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 Used, untested Additional information – Machine weight: approx. 4,200 kg Dimensions (L x W x H): approx. 2,400 x 2,400 x 2,500 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: good (used), overall weight: 400 kg, Skinetta ASK 450 Stretch Banding Machine Intended Use of the Machine The stretch banding machines in the SKINETTA series are designed for tightly wrapping individual or multiple products with polyethylene film. In contrast to shrink-wrapping machines, the film is pulled tightly around the package before sealing. This tightening is the main advantage of this process, reducing film consumption by up to 20%. A particular advantage of the patented SKINETTA sealing system is the stepless, precise metering. The film is sealed (welded) in a very small area, creating a clean seal with minimal overhang. By using a SKINETTAther or SKINETTAshrink hot air hood and a sufficiently wide film, the protruding film overhang can be reduced laterally. This increases the stability of the container and prevents individual products from falling out sideways in correspondingly grouped containers. With suitable additional devices, a complete closure of the containers is possible by sealing, crimping, and folding the film laterally. The SKINETTA stretch banding machine program includes six basic models for film widths from 25 mm to 200, 290, 440, 590, 790, and 1250 mm. To increase output, two- to four-lane systems are available in addition to the single-lane version. - With the SK series (semi-automatic), the products are grouped on the machine table by an operator. Insertion into the film and the subsequent stretch banding process is triggered either by a foot switch or a two-hand control. Full automation is possible at a later date (except for the SK 200 model). - With the ASK series (fully automatic), the products are fed, grouped, and then banded fully automatically using appropriate additional equipment. A modular system of feeding, grouping, forming and special equipment based on over 20 years of experience allows adaptation to the most diverse customer tasks with proven standard elements. Technical Data Machine dimensions (basic machine) Length: 1670 mm Width: 980 mm Dedsp U T Ifspfx Ab Nswc Height: 1700 mm Table height: 1700 mm Weight: 400 kg Power connection: 400 V Power consumption: 6.1 kW Additional equipment: slat chain conveyor You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, Control HEIDENHAIN TNC-620 x-travel 820 mm y-travel 510 mm z-travel 510 mm table dimensions 800 x 400 mm tool taper HSK 63 number of tool places 24 Pos. Number of working hours ca. 9.758 h weight ca. 5.300 kg Dwodpfx Abez N Hx Is Nec Condition: Used Technical features & accessories: - 2 machine vices - Chip conveyor - EUROCOLD H2021P473 cooling unit Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change and errors in technical data and specifications; subject to prior sale.

Condition: good (used), Year of construction: 2011, Machine is in good working condition. Parts shown by hand not come. Dwsdoz Nx Ubspfx Ab Noc

Condition: ready for operation (used), Year of construction: 2007, Hurco VMX 30 T vertical machining center Dodpfxsz H Nvij Ab Njwc 3-axis Year: 2007 Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories/options: - Coolant tank - Spindle coolant unit - Chip conveyor - software options Under power in our warehouse.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Table ... 1300 x 550 mm X ... 1050 mm Y ... 530 mm Z ... 510 mm Spindle revolutions ... 10 - 12000 rpm 3 axes Dsdpfxsz Nkn Te Ab Nowc Taper in spindle ... ISO 40 Max. table loading ... 1200 kg Number of tools in tool changer ... 30 Number of pallets ... 2 Machine weight ... 7700 kg

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM Dwedpfxsz Ehxyo Ab Njc TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: used, Year of construction: 2000, functionality: fully functional, overall weight: 12,000 kg, Equipment: documentation/manual, FOUR IPSEN TQ 2/7 - Completely refurbished in 2010 - Usable dimensions: 910*610 H=500 - Gas-fired heating with radiant tubes - Control (load and atmosphere) via PROTHERM 500 system PRICE (incredible!): €32,000 EXW (excluding VAT) ENDOTHERMIC GENERATOR IPSEN 2018 (new retort in 2023) - Gas-fired heating - Reaction gas = natural gas PRICE: €32,000 EXW (excluding VAT) Equipment to be dismantled by the buyer (We can provide a quote for dismantling and loading onto a truck) Equipment available immediately Dwsdpfx Ajz Iayueb Njc Inspection possible (Saint Etienne 42)

Condition: used, Year of construction: 2008, Travels X/Y/Z: 1020mm/610mm/610mm, table dimensions X/Y: 1300mm/600mm, max. table load: 900kg, spindle taper: SK40, spindle speed: 12000rpm, tool positions: 30, control: Heidenhain iTNC 530, machine operating hours: 27500h, spindle operating hours: 12700h. Including 3D touch probe, through-spindle coolant at 20bar, additional external air cooling and scraper belt chip conveyor. The machine was used in single-shift operation. Dwjdpfx Absz Nwcks Nsc

Condition: good (used), Year of construction: 1970, pulling force - max. 2 t max. ram stroke 400 mm max. workpiece diameter 1000 mm workpiece weight 10 t clamping table 900 x 680 mm Dwodpfx Abjz Ic A Ej Nec total power requirement 5,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,3 x 1,2 x 1,5 m

Condition: used, Year of construction: 2000, functionality: limited functionality, travel distance X-axis: 1,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 450 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,200 mm, table load: 700 kg, overall weight: 5,000 kg, spindle speed (max.): 3,000 rpm, distance table to spindle center: 600 mm, input voltage: 380 V, type of input current: three-phase, distance stand to spindle center: 450 mm, distance table to quill: 450 mm, grinding spindle motor power: 20 W, grinding spindle speed: 3,000 rpm, LGB brand surface grinder, machine with few hours of use, price plus VAT. I have other machines for the metalworking industry; please contact me. Dwodpfx Aboz Eac Rs Noc

Condition: used, Year of construction: 2006, Equipment: documentation/manual, Control Fanuc 0M Two palletes Dwjdpfx Aszxxv Ejb Nsc Table dimensions – 650x420 mm Axes: X 580mm, Y 420 mm, Z 490 mm Spindle 12 000 rpm, SK40 Machine dimensions 2500 x 2100 x 2500 mm Machine weight 3900 kg

Condition: excellent (used), Year of construction: 2004, 5-axis machine from Hermle - Hermle U740 - Year of manufacture: 2004 Control system: - Heidenhain iTNC 530 - Electronic handwheel - 3D measuring probe Renishaw OMP 40-2 Main spindle: - Tool holder SK 40 - Speed range max. 12,000 rpm Djdpfx Ajz Nih Eob Njwc - B-axis with hydraulic clamping -5° / +95° Tool changer: - 12 magazine positions Working area: - X- 915mm - Y- 500mm - Z- 500mm Table design: - NC rotary table - Table load max. 500 kg Coolant: - Internal cooling 40 bar - Chip conveyor Machine hours: - Machine: 30,622 - Spindle: 8,844 Delivery time: - Immediate Video available. Special features: - Machine is ready for immediate use. - Machine is available for immediate delivery. - Machine can be inspected and tested on-site while powered. - Machine will be loaded onto a truck free of charge. - Forklift for loading is available. - Transport can be arranged upon request.

Condition: used, Year of construction: 2003, operating hours: 56,616 h, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 770 mm, rapid traverse X-axis: 3,000 m/min, rapid traverse Y-axis: 3,000 m/min, rapid traverse Z-axis: 3,000 m/min, feed length X-axis: 2,500 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 770 mm, feed rate X-axis: 3,000 m/min, feed rate Y-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, nominal power (apparent): 40 kVA, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 6,500 mm, total width: 4,000 mm, table width: 1,000 mm, table height: 950 mm, table length: 3,220 mm, rotational speed (min.): 30 rpm, rotational speed (max.): 8,000 rpm, overall weight: 21,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 8,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 40, tool length: 380 mm, tool diameter: 80 mm, tool weight: 15,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this used Hedelius BC100-2500 vertical machining center, manufactured in 2003. Key data: Manufacturer: HEDELIUS GmbH Type: BC 100/40-2500 Year of manufacture: 2003 Power requirement / voltage: 40 kW / 400 V / 50 Hz (40kVA) Total weight: 21000 kg Space requirements: Length: 6.50 m Width: 4.00 m Height: 3.70 m Control system: Program input: HEIDENHAIN Control: iTNC 530 NC software version: 340422 11 SP5 PLC software version: BC100_V1.2 Operating hours: Control on: 67335 Machine on: 56616 Program runtime: 18289 Travel distances: X-axis: 2500 mm Y-axis: 1000 mm Z-axis: 770 mm Feed rate: X-axis: 3000 mm/min Y-axis: 3000 mm/min Z-axis: 3000 mm/min Rapid traverse: 3000 mm/min Workpiece clamping area - fixed machine table: Length: 3220 mm Width: 1000 mm Work table: T-slots: DIN 650 Slot width: 22 mm Slot spacing: 200 mm Number: 5 Table height: Fixed machine table: 950 mm Tool magazine: Magazine capacity: 40 positions Max. tool diameter: Ø 80 mm (with available empty slots): Ø 125 mm Max. tool length: 380 mm Max. individual weight: 15 kg Total magazine weight: 600 kg Spindle: Speed range: 30 – 8000 rpm Mount: SK 40 Special accessories: Scraper belt conveyor: AME GmbH Total length: ≈ 6660 Height: ≈ 1760 Depth: ≈ 740 Belt filter system: (High-pressure coolant system) Model: PS 120 Tank capacity: 780 l Output: 120 l/min Filter fleece: 670 mm 100 m on roll Length: ≈ 2320 Height: ≈ 1060 Dwodpfx Ajz H Hwkob Njc Depth: ≈ 850 Control cabinet - cooling unit: Manufacturer: Pfannenberg Type: DTS 7241 Model No.: 217943 Wireless measuring probe: Manufacturer: HEIDENHAIN Model: TS 632 Type: Infrared measuring probe Mount: SK 40 If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2006, Technical details: turning diameter: 250 mm swing diameter: 260 mm Available from October 10, 2025 The system consists of two individual systems that are linked together. No driven tools! Dwedpfjxc Idgsx Ab Njc *

Condition: good (used), Year of construction: 2023, functionality: fully functional, For sale, available from our location in 45891 Gelsenkirchen, is a set of two ULMA VTI 440 packaging machines. The packaging machines were manufactured in 2023, are used, and come from a business liquidation. Currently, the packaging machines are still connected to the power supply and can be inspected after scheduling an appointment. Djdpfx Ajz Izy Neb Nswc For technical data, please contact the manufacturer. Dismantling and loading are the responsibility of the buyer.

Condition: used, Year of construction: 2011, operating hours: 13,600 h, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Dwedez I Du Aepfx Ab Noc Complete with manuals and CE certificate.

Condition: good (used), Year of construction: 1995, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, 4-axis machine X-axis travel: 1000 mm Y-axis travel: 600 mm Dedpfxez Izc Dj Ab Nowc Z-axis travel: 600 mm Control system: Heidenhain TNC 426 Spindle nose: 100-700 mm Work table: 1,080 x 580 mm Maximum workpiece weight: 550 kg T-slots: 7 T-slot width: 14 mm Tool magazine with: 36 positions Maximum tool weight: 8 kg Maximum tool length: 340 mm Machine weight (approx.): 6.2 t Space requirement (approx.): 4,790 x 5,330 x 2,905 mm

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: selca, controller model: selca 1200, spindle speed (min.): 1,000 rpm, spindle speed (max.): 4,000 rpm, spindle nose: BT40, input voltage: 380 V, type of input current: three-phase, CB Ferrari milling machine in excellent condition. Used exclusively for milling aluminum plates. Comes with: - 2 vises, 150mm jaw width, 400mm opening - SELCOM serial communication program - Control parameter backup - Electrical diagrams - Selca 1200 manual - Programming manual Control batteries and electrical panel cooling fan have just been replaced. Z-axis bellows needs to be replaced. Dwsdez Nwwhepfx Ab Noc

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller manufacturer: Fanuc 16i-M, controller model: 16i-M, table width: 390 mm, table length: 850 mm, rotational speed (min.): 80 rpm, rotational speed (max.): 8,000 rpm, spindle speed (min.): 80 rpm, spindle speed (max.): 8,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, X-axis travel: 500 mm Y-axis travel: 380 mm Z-axis travel: 300 mm Table size: 850 × 390 mm Controller: Fanuc 16i-M Spindle taper: BT30 Spindle speeds: 80 - 8000 rpm Tool changing time: 1.0 sec. ATC: 14 pockets Including: 3x machinevices 36 Toolholders Oilfilter Filtermist S800 Dsdeyw Inqepfx Ab Newc Machine manuals Country of origin: Japan Motor power: 3.7 kW Machine (L×W×H): 160 × 190 × 220 cm Machine weight: 1900 kg

Condition: used, Year of construction: 1989, max. wheel diameter 120 mm Dwedpez Drcaefx Ab Nsc gear width 400 mm max. module 10 min. module 1 total power requirement 40 kW weight of the machine ca. 7 t dimensions of the machine ca. 3,840 x 5,025 x 2,490 m

Condition: not inspected (used), Year of construction: 2011, operating hours: 12,000 h, functionality: unexamined, machine/vehicle number: 1200 000043 7, TECHNICAL SPECIFICATIONS CNC control: Siemens Sinumerik 840D Number of axes: 5 axes Travels X-axis travel: 120 mm Y-axis travel: 120 mm Z-axis travel: 200 mm A-axis: -10° to +120° C-axis: 360° continuous Rotary table Diameter: 190 mm Maximum load: 10 kg A-axis speed: up to 100 rpm C-axis speed: up to 150 rpm Spindle Maximum speed: 40,000 rpm Power: approx. 6 kW Maximum power: approx. 7.7 kW Torque: approx. 1.6 Nm High-frequency spindle with ULTRASONIC technology Feed rates Rapid traverse X/Y/Z: up to 10 m/min Tools Tool holder interface: depending on machine configuration Maximum tool length: approx. 130 mm Maximum tool diameter: approx. 49 mm Tool magazine: depending on configuration General data Power supply: 400 V Connected power: approx. 25 kVA Compressed air: approx. 6 bar Machine weight: approx. 1,800 kg TECHNOLOGY The DMG SAUER ULTRASONIC 10 combines high-precision 5-axis CNC machining with ultrasonic-assisted machining technology. Dedoz Efpcepfx Ab Nowc This technology is particularly well-suited for machining difficult materials such as: Ceramics Carbide / hard metal Glass Corundum Technical materials and hard and brittle materials Machine particularly suitable for the micromachining, watchmaking, medical/dental, optics, and high-precision application sectors. Subject to errors and changes in technical data.

Condition: excellent (used), For sale: robust WEMAS column milling machine, model FM23. Heavy cast iron construction, very rigid—ideal for toolrooms and maintenance workshops. The machine is equipped with a 3-axis DRO D60-3V digital readout and Rascher Nürnberg–München measuring scales. Table with longitudinal T-slots, coolant system with separate reservoir and pump. Vertical spindle with a precision holder and feed adjustment. Power supply: 3×400 V. The machine is complete, recently serviced, runs smoothly, and is ready for power-on testing. Normal signs of use visible—no excessive play. Included in the price: 3-axis DRO display, scales on X/Y/Z axes, coolant tank and pump, cables, power feed roller, and work light. Additional information from photos: 'WEMAS' and 'FM23' nameplates, spindle adjustment calibration plate, DRO panel with mm/inch, ABS/INC, and calculator functions. Dwjdpfxew I Hzpe Ab Nec Working parameters, spindle taper, and speed ranges to be confirmed onsite—I can measure the table and X/Y/Z travels upon request. Loading by forklift possible. Assistance with transport organization available.