Used Vulcanizing Press for sale (12,182)

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,000 mm, quill stroke: 350 mm, quill travel distance: 350 mm, overall weight: 24,350 kg, input voltage: 400 V, power: 38.5 kW (52.35 HP), type of input current: three-phase, AMADA HFP 400-4L NT CNC HYDRAULIC PRESS BRAKE – 400 TONS / 4 METERS Amada HFP 400-4L NT hydraulic press brake from 2008, manufactured in France by Amada Europe. Robust and rigid machine, designed for bending thick sheet metal and large lengths in boiler making, metal construction, and industrial sheet metal fabrication. TECHNICAL SPECIFICATIONS - Manufacturer: Amada (Amada Europe S.A., France) - Model: HFP NT 400-4L - Year of manufacture: October 2008 - Serial number: B080063 - Bending force: 4,000 kN (approximately 400 tons) - Bending length: approximately 4 meters - Maximum stroke: 350 mm - Machine weight: 24,350 kg - Power supply: 400/415 V – 50 Hz – three-phase - Installed power: 38.5 kW - Rated current: 67 A - Sound level: less than 75 dB(A) - CE marking NUMERICAL CONTROL - Original Amada AMNC PC control system - Programming screen mounted on a pivoting arm - Remote electronic handwheel for fine adjustment (x5 function) - Control panel with emergency stop and test mode - Floor-mounted control pedal SAFETY - Fiessler AKAS laser safety barrier, with AKAS II-3M receiver - Operator hand protection as close as possible to the punch - Closed protective grating at the rear of the machine Isdpfx Apjz Sva Hs Dsih BACK GAUGES - Motorized back gauges controlled by the numerical control system - Guided by ball screws and linear rails - Repeatable sheet metal positioning INCLUDED TOOLING - Segmented punches and dies mounted on the machine - Additional set of dies, punches (including Eurostamp), and accessories, on a pallet and in a crate CONDITION Machine located in an active workshop, complete equipment (control, safety barrier, back gauges, tooling). Paintwork worn, consistent with industrial use. SALES CONDITIONS - Location: Netherlands - Incoterm: EXW Dordrecht (negotiable) - Disassembly, loading, and transport are the responsibility of the buyer - Availability: from November 3, 2026 - Inspection possible by appointment

Condition: good (used), Year of construction: 1987, machine/vehicle number: 12871, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 380 V, pressing force: 112 t, oil tank capacity: 120 l, total length: 3,300 mm, total width: 2,150 mm, total height: 2,500 mm, overall weight: 10,000 kg, controller manufacturer: DELEM, controller model: EA 22, working length: 3,100 mm, DARLEY EHP 110 31/25 press brake - including foot switch and the bending tool located on the machine FCA D-35614 Aßlar - loaded onto a truck Iodoz I N D Nopfx Ap Djih

Condition: used, Year of construction: 1961, Used Machine Isdpozyy Apsfx Ap Doih Features and Technical Specifications: Pressing surface size: 2500 x 1300 mm Machine is designed for disassembly Total pressing force: 60 metric tons Specific pressing force: 1.85 kg/cm² Plate spacing: 350 mm L x W x H: approx. 3,230 x 1,340 x 1,775 mm Availability: immediately Location: Rhineland-Palatinate

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Iodpfx Apoz Rk N Te Deih Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 105000, overall weight: 13,000 kg, Inotechno hydraulic press, 100-tonne capacity. Iijdpfxoz Tbnxo Ap Dsh

Condition: used, total length: 11,500 mm, total width: 2,450 mm, total height: 2,600 mm, Colour: Green Empty weight: 16.500 kg Veneer press Feed-through press HOT Colombo Ijdpfswnhvvox Ap Dsih Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1400 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 8 - Cylinder diameter [mm]: 85 - Working pressure [kg/cm²]: 4 - Heating type: Oil heated - Voltage [V]: 400 - Transport dimensions: 11500mm x 2450mm x 2600mm (l x w x h) - Transport weight [kg]: 16500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 3,200 mm, total width: 1,450 mm, total height: 2,750 mm, Year of manufacture: 1979 Iedpfxjz R Dg Eo Ap Dsih Colour: Beige Weight: 7.000 kg - Year: 1979 - Serial number: 206k747 - Drive system: Conventional - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 110 - Max. working width [mm]: 3100 - Column gap [mm]: 2620 - Backgauge depth [mm]: 700 - Crowning system: None - Punch holder: Fixed - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3200mm x 1450mm x 2750mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Rolong Hydraulic Book Spine Calibration Press This machine is used to calibrate the spines of book blocks or brochures. After calibrating the spine, its thickness is equal to the thickness of the block in the groove. This process is performed after the books have been sewn. Isdpfx Apez Rk Nye Djih 380V power supply Manufacturer: Gantenbein, Switzerland

Condition: good (used), Year of construction: 2011, machine/vehicle number: B0702A0516, functionality: fully functional, TRUMPF TruBend 7036 – CNC Press Brake – Year of manufacture 2011 – Extensive equipment Machine data Feature Description Manufacturer TRUMPF Model TruBend 7036 Year of manufacture 2011 Machine type CNC Press Brake Press force 360 kN (36 t) Bending length 1,020 mm Iiedpfoz S N Ecjx Ap Deh Control system TRUMPF TASC 6000 Back gauge 6 axes Machine no. B0702A0516 Connection 400 V / 50 Hz Location Germany Description For sale is a TRUMPF TruBend 7036 from the year 2011 with extensive special equipment. The TruBend 7036 is a compact, high-precision CNC press brake that is particularly suitable for the economical processing of small and medium-sized sheet metal parts. Thanks to the electromechanical direct drive and the ergonomic design, the machine is ideal for precise and efficient bending operations. Equipment and special options Machine and control system - TRUMPF TASC 6000 CNC control system - 15-inch touchscreen - Graphical workshop programming - Electromechanical direct drive (torque motor) - High-precision length measuring system - 6-axis back gauge system - Bending line laser - BendGuard safety system (block laser) - Automatic tool clamping - Operating data acquisition - Work area lighting at the front and rear (LED) Ergonomics package - Comfort support table - Comfort footrest - Swiveling control unit - Seat and standing aid - Storage consoles - Document holders Productivity Plus Package - Graphical workshop programming - Automatic tool clamping - BendGuard (block laser) Extensive accessories Additional information The machine was originally ordered with extensive special equipment and is particularly suitable for: - Fine sheet metal processing - Precision bent parts - Small series production - Prototype construction - Complex bent parts For sale due to business closure.

Condition: good (used), Year of construction: 2016, functionality: fully functional, TRUMPF TruBend 5170 Final Edition – 170 t – 3,230 mm – 6 axes – Year of manufacture: 2016 For sale is a TRUMPF TruBend 5170 Final Edition from the year 2016 with extensive special equipment. The CNC press brake has a clamping force of 170 tons, a bending length of 3,230 mm, and a high-quality 6-axis back gauge system. Thanks to the electro-hydraulic 4-cylinder technology, the CNC crowning system, and the hydraulic tool clamping, the machine is suitable for demanding and precise bending operations. Technical data - Manufacturer: TRUMPF - Model: TruBend 5170 Final Edition - Year of manufacture: 2016 - Clamping force: 1,700 kN / 170 t - Bending length: 3,230 mm - CNC control: TRUMPF TASC 6000 - Back gauge: 6 axes - Drive: Electro-hydraulic with 4-cylinder technology - CNC crowning system - Hydraulic upper and lower tool clamping - Pneumatic lower tool displacement, 2 positions Special equipment - 6-axis back gauge system - TRUMPF TASC 6000 with graphic programming - TruTops Bend with TruTops CAD via network access - 15-inch touchscreen - MobileControl - CNC crowning system - BendGuard safety system - TCB – Thickness Controlled Bending - Two front support consoles - Additional foot switch - Work area lighting, front and rear - Optical setup and positioning aid Iiedpfsz Tdhbsx Ap Deh - Oil cooler - Teleservice via internet - Hydraulic tool clamping Further information The machine was purchased as a new machine directly from TRUMPF in 2016. Original invoice and technical documentation are available. Inspection and further information by arrangement. Sale due to business closure.

Condition: good (used), functionality: fully functional, Heidelberg GTC Die-Cutting Press – 60 tons of die-cutting pressure Industrial classic | extremely robust | comprehensive accessory package For sale is an original Heidelberg GTC die-cutting press, one of the most powerful and robust die-cutting machines from Heidelberg. The year of manufacture and operating hours are not documented (typical for this machine generation), but the condition is functional, complete, and exceptionally well-equipped. Special feature: 60 tons of die-cutting pressure The GTC clearly distinguishes itself from other Heidelberg die-cutting presses (e.g., GT / T / smaller models): ➡ 60 tons of die-cutting pressure instead of the usual approximately 40 tons. This makes the machine ideally suited for: • Thick cardboard • Multi-layer materials • Demanding die-cutting and scoring jobs • Tools with high surface pressure _____ Ijdpoyc Hnfefx Ap Deih Equipment & Scope of delivery • 3 die-cutting frames, including o 1 frame with a 340 mm milled recess (ideal for special tools / larger formats) • 2 die plates in different thicknesses • Comprehensive accessory and spare parts package (see pictures) • Spare parts list available – a significant advantage for operation and value retention • Original Heidelberg mechanics (robust, durable, easy to maintain) _____ Typical areas of application • Die-cutting and scoring • Format die-cutting • Small and medium-sized series • Packaging, cardboard, technical die-cut parts • Ideal for workshops, processors, and specialized companies Conclusion The Heidelberg GTC is not a museum piece, but a real production tool. With 60 tons of die-cutting pressure, several die-cutting frames, die plates, plenty of accessories, and a documented spare parts list, this machine offers an exceptional overall package for professional users.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 135 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 400 mm Overhang: 305 mm Usable installation height: 440 mm Table height: 800 mm Table width: 90 mm Machine weight (approx.): 9,100 kg Machine height: 2,500 mm Iisdpfx Apjzt R D Dj Doh Equipment: - CNC control system Cybelec VisiTouch (retrofit 2026) - 2 pcs. support arms - Foot switch - Side protective doors - Laser safety device - Tool holder EHT - Pneumatic die shifting - Crowning - Controlled axes: y1, y2, x, R

Condition: good (used), Year of construction: 1982, functionality: fully functional, Hydraulic Try-Out Press (Four-Column Press) Pressing force: 3.000 kN Maximum slide stroke: 1.20 mm Table size: 2.050 x 1.300 mm Distance between columns: 2.050 mm (long side), 700 mm (short side) Maximum distance from mounting surface to slide: 1.350 mm Isdpfxjz S H U Uo Ap Dsih Minimum shut height: 250 mm Power requirement: 55 kW Tank capacity: 1.200 l Total weight: 55.000 kg Press height: 5.800 mm

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Ijdpotx T Tyofx Ap Deih

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly. Iiedoy Dfclopfx Ap Deh

Condition: good (used), Year of construction: 2015, functionality: fully functional, bending force (max.): 230 t, Bending length [mm] 3230 Press force [tons] 230 Control system TRUMPF TASC 6000 Standard equipment: Machine - Robust machine frame in all-steel construction - Press beam, stress-relieved by annealing - Spherical mounting of the press beam with inclination - Electro-hydraulic upper drive with 4-cylinder technology - Generous bending clearance - Flat front covers - Modern block hydraulics Iiedpfx Apsz Rl Nhs Deh - Electronic pressure gauge - Measuring system with glass scale and spring compensation - Hydraulic oil in the machine (lifetime lubrication) - Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Back gauge system - Rear back gauge system, 2 axes, X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool holder, manual clamping, hardened - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - Manual crowning Control system - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock frequency - 2 GB RAM - 15-inch touch screen - Network capable - Teleservice via modem Operation - Control panel with LCD keypad and foot switch - Communication bus Safety - Standard safety devices

Year of construction: 1999, condition: used, Year of manufacture: 1999 Colour: Grey Membrane press Orma PM/AIR Year of construction 1999 Serial number 52850199 Iodpfewnhicjx Ap Dsih Dimensions 2300*900mm Max panel size 2200x800mm Max panel thickness 40mm 8 cylinders diameter 100mm Stroke 150mm Pressure 160T Pressure pressure 6 kg/cm² Heating 13kW Total power 17.3kW 380V, 35Amp Dimensions: 3900x1800xH2100mm, weight 5900kg - Year: 1999 - Serial number: 52850199 - Main motor power [kW]: 17.3 - Max. workpiece length [mm]: 2200 - Max. workpiece width [mm]: 800 - Max. workpiece height [mm]: 40 - Number of cylinders [pcs.]: 8 - Cylinder diameter [mm]: 100 - Total working pressure [Ton]: 160 - Working pressure [kg/cm²]: 6 - Heating boiler present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1987, machine/vehicle number: 17251, Pressing force: 63 tons, with draw cushion and separate hydraulic unit. Isdpfx Apez Nhp Io Dsih

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Iodpfxjz N Exge Ap Djih Capacity 2050 x 50 tons Delem control system Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: used, Year of construction: 1997, operating hours: 29,000 h, input voltage: 400 V, input current: 35 A, pressing force: 220 t, total length: 3,650 mm, total width: 2,100 mm, total height: 2,950 mm, overall weight: 13,500 kg, Equipment: documentation/manual, Amada HFB 220-3 1997 Iedpjz Tlg Eofx Ap Djih Press force: 220 tons Stroke length: 3000 mm Controlled axes: 8x Y1/Y2/X1/X2/R1/R2/Z1/Z2 Cylinder stroke: 180 mm Tooling: Amada Control system: Amada OP2 Graphic Total length: 3750 mm Total width: 2200 mm Total height: 1950 mm Weight: 13500 kg Operating hours: 29500

Condition: used, total length: 2,100 mm, total width: 1,100 mm, total height: 3,200 mm, Year of manufacture: 1976 Colour: Green Empty weight: 6.000 kg - Year: 1976 - Documentation available: Yes - Serial number: 8753 - Drive system: Conventional - Press model: C-Frame press - Press configuration: Single-acting - Press force [ton]: 63 - Max. stroke [mm]: 560 - Table length [mm]: 640 - Table width [mm]: 640 Iisdpfsz R Ehwsx Ap Doh - Ram length [mm]: 555 - Ram width [mm]: 555 - Max. opening height [mm]: 350 - Transport dimensions: 2100mm x 1100mm x 3200mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Ijdpfx Apoz Snrnj Djih Control: foot pedal The machine is sold with the table shown in the pictures.

Condition: excellent (used), Year of construction: 2019, pressure 13 t box opening 890 x 600 mm box depth 400 mm total power requirement 2,2 kW Iodpfxjz Rqp Ho Ap Dsih weight of the machine ca. 0,765 t dimensions of the machine ca. TBH 1,4 x 1,3 x 2,15 m for cans, PET, and cardboard MACFAB (distributed by BEMA Verpackungsabfall GmbH). • Pressing force: 130 kN (13 tonnes) • Motor power: 2.2 kW • Voltage: 230 V / 50 Hz (1-phase, AC) • Machine dimensions: H: 2,133 mm | W: 1,040 mm | D: 1,328 mm • Loading opening: H: 890 mm | W: 600 mm | D: 400 mm • Bale dimensions: approx. 650 mm (H) x 400 mm (D) • Typical bale weights: • Cardboard: 40 – 60 kg (depending on material) • Aluminum cans: up to 25 kg (approx. 1,500 cans) • PET bottles: up to 32 kg (approx. 1,000 bottles) • Special feature: Cross-strapping ensures stable bale shapes for cans and plastics. Fast cycle time of 24 seconds. Low operating noise level of 72 dB.

Condition: used, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Year of manufacture: 2020 Colour: Grey Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-41s - Power [kW]: 4.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Crowning system: None - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) Iiedpfxozr Inwj Ap Djh - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2020, Like-new press brake from Ermak / Ermaksan Type: Power-Bend Pro 3100 135 Capacity: 3100 x 135 tons Delem DA56s CNC control Y1, Y2, and X axes CNC controlled Akas Fiessler laser safety system Amada/Euro clamping system Manual crowning Includes a set of tooling Iedpjzunlhsfx Ap Dsih