Used Weiler Mdu 260 for sale (192)

Condition: used, Year of construction: 2002, turning diameter 240 mm turning length 530 mm control Siemens 810 D Powerline swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min 12 Stk. total power requirement --- kW Isdpeycxibjfx Abvoic weight of the machine ca. 6,1 t

Condition: excellent (used), functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, equipped with a 3-axis digital display from Heidenhain ND 780, from a training workshop!! Technical data: >> Machine No. 7702, year of manufacture approx. 1990 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet fitting >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: Iodpfx Abjy T Hqcovjic >> 3-axis digital display Heidenhain ND 780 >> Quick-change tool holder, internal and external collets (see picture) >> 1 three-jaw chuck, 3 sets of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Machine feet About the machine: Offered is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. Even at high speeds, the Weiler runs quietly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: used, Year of construction: 1986, turning diameter over bed:320 mm turning diameter over slide rest:198 mm turning length:650 mm total power requirement:2,2 kW weight of the machine ca.:650 kg dimensions of the machine ca.:1700x1000x1700 mm :3 - Achsen - Digitalanzeige :Ø 40 mm :96 - 2500 U/min :A 2 - 5 :0,007 - 0,63 mm/U :metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 :MK 3 Iiedpjufud Djfx Abvoc 3-jaw chuck:160 mm mm :Typ B

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Iiodpfxezcn Aks Abvsc

Condition: ready for operation (used), L & Z lathe / WEILER MATADOR from a vocational training center Iiodpjzb Rm Asfx Abvsc -Center height approx. 150mm -Swinging diameter over carriage 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3550 rpm -Automatic longitudinal / cross feeds -Tailstock / MK3 -Three-jaw chuck -Chip guard -Coolant system -Work light -Documentation Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm Iijdpsy Tmkvofx Abvjc >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Iodpfx Asy Ti Sisbvjic Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Iisdpey Ti Nuofx Abvjc Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: ready for operation (used), Year of construction: 2003, Weiler E50 x 1000 precision lathe (2003) Manufacturer: Weiler Type: E50 x 1000 Year of manufacture: 2003 Condition: good, used, under power Operating hours: 43.000h Technical data see pictures. Included in delivery: - Original documentation - Rota S Plus 250-62 - Bezel - Parat 4 compartment tool turret Ijdpfx Aboy Ti Iwsvsic

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Type: Primus VCD Precision Lathe Year of manufacture: 2016 Commissioned: 2017 Condition: used, very good, like new, new maintenance performed according to factory specifications with acceptance report Operating hours: 1777h Spindle hours: 512h Scope of delivery: - Documentation - Machine feet - Machine lamp - Chuck Iijdpsy Ti Iksfx Abvsc - Coolant system - MultiFix size A

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock Iijdpfxsy Ti E Ns Abvec – Multifix tool holder – 8x machine feet – Original tool set

Condition: reconditioned (used), Year of construction: 2002, SERVO CONVENTIONAL LATHE WEILER „C 30“ With 2 axes, Siemens Sinumerik 802 C control with WEILER C 1 software Year of manufacture: 2002 Spindle bore: 42 mm Distance between centers: 750 mm Diameter of swing over bed: 330 mm Speed range: 1 – 4500 rpm With the following accessories: Multifix tool holder Chuck guard 3-jaw chuck RÖHM 0 160 mm 2 sets of hardened jaws Iedpfx Ajy Txu Hebveic Collet chuck 3 centering pins Chip tray Chip guard with lighting Coolant system 10 adjustable machine feet Operating manual THE MACHINE IS IN VERY GOOD CONDITION!!

Condition: used, Year of construction: 1998, operating hours: 38,856 h, functionality: fully functional, machine/vehicle number: 643, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 66 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,750 mm, total length: 3,850 mm, total width: 1,815 mm, quill diameter: 80 mm, quill stroke: 200 mm, swing diameter over cross slide: 340 mm, turning diameter over bed slide: 570 mm, overall weight: 3,550 kg, center width: 2,000 mm, center height: 280 mm, bed width: 350 mm, For sale is a used/well-maintained WEILER lathe, model E 50. 2022 (Repairs/renovations performed by WEILER service technicians): - Bed slide disassembled, cleaned, and recoated - Hand grips re-covered and adjusted - Spindle bearings and timing belt of the X-axis replaced - Bearing unit of the Z-axis replaced Iiodpfx Aezcv Egjbvec - Scraper replaced - Reference points adjusted - Test run performed

Condition: used, Year of construction: 2017, operating hours: 11,298 h, functionality: fully functional, machine/vehicle number: LF 01, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle bore: 83 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 2,500 rpm, total height: 1,800 mm, total length: 3,850 mm, total width: 2,400 mm, overall weight: 4,300 kg, swing diameter over bed slide: 570 mm, swing diameter over top slide: 340 mm, bed width: 350 mm, feed force X-axis: 10,000 N, feed force Z-axis: 12,000 N, spindle torque (max.): 1,300 Nm, For sale is a WEILER E 50HD x 2000 SL2 precision lathe in good/well-maintained condition. Sale due to business closure. Includes various accessories. Iisdpfxjzcvhno Abvsc

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 270, center width: 900 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, Equipment: CE marking, TECHNICAL DETAILS Iisdpfjy Rx A Ssx Abvjc Swing diameter over bed: 420 mm Centre height: 210 mm Centre distance: 900 mm Spindle bore: 55 mm Spindle speed: 4 - 3,000 rpm MACHINE DETAILS Control type: Teach-in Control system: CNC EQUIPMENT Digital readout (Weiler) Documentation available CE marking

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Iisdpfxjxp Ru Uo Abvec

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Iedpfexp Rvlsx Abvjic

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Ijdpjx Tp Dxjfx Abvjic Height:1200mm Weight:290kg

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Iisdpeyub Spsfx Abvec Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 33,908 h, functionality: fully functional, CNC – Lathe Manufacturer: WEILER Model: E 35 D Year of manufacture: 2002 Technical data Brand: WEILER Model: E35 D Year: 2002 Center distance: 950 mm Center height: 200 mm Turning diameter over bed: 410 mm Spindle bore: 54 mm Max. turning diameter: approx. 260 mm Spindle speed: 20 – 3000 rpm Power: 10 kW Dimensions: approx. L 2.60 x W 1.60 x H 1.70 m Weight: approx. 2.5 t Equipment • Operating manual • Coolant system • 3-jaw chuck Iisdpfoy R Uukox Abvoc • Collet chuck adapter All information subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: ready for operation (used), L & Z Lathe WEILER Praktikant 800 R -Turning diameter over bed: 300mm Iedpfozbiyhjx Abvjic -Turning diameter over cross slide: 150mm -Turning length: 800mm -Spindle bore: approx. 42mm -Speed range: 40 - 2000 rpm -Automatic longitudinal/facing feeds -Threading / Metric / Inch, etc. -Tailstock: MK 3 -Three-jaw chuck -Chip guard & work light -Chip tray -Change gears -Tool cabinet & operating tools -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight: 800 kg Errors and omissions excepted.

Condition: used, Year of construction: 2005, operating hours: 11,800 h, functionality: fully functional, spindle bore: 41 mm, turning length: 750 mm, turning diameter: 330 mm, turning diameter over bed slide: 435 mm, quill diameter: 50 mm, center height: 165 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 11,000 W, overall weight: 1,400 kg, Equipment: rotational speed infinitely variable, Description For sale is a cycle-controlled WEILER E30X750 CNC lathe with a Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2005 Control system: Siemens 810 D Condition: good, fully functional Location: near Munich Inspection: on-site or via video call by arrangement Pictures/Video: Further pictures and videos of the running machine will be provided upon request. Technical data: Working area: Center height: 165 mm Swinging diameter over bed: 330 mm Swinging diameter over cross slide: 160 mm Distance between centers: 750 mm Turret: Turret head DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter in the front bearing: 70 mm Max. torque on the turret: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 min⁻¹ Number of speeds: continuously variable Feed / Rapid traverse Feed drive: Three-phase AC feed drives Feed range (continuously variable): longitudinal: 0.001–50 mm/rev (Note: additionally specified 0–20 mm/rev) transverse: 0.001–50 mm/rev Feed force: longitudinal: 6,000 N transverse: 3,000 N Max. rapid traverse speed longitudinal/transverse: 8 / 4 m/min (Note: additionally specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 threads/inch Tailstock / Quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / Weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1800 × 1350 × 1700 mm Iijdezbybvepfx Abvec Interested? Contact us for further information and to arrange an inspection appointment. Provider MT EVO, Puch bei Salzburg

Condition: used, Year of construction: 2000, functionality: fully functional, Lead and feed screw lathe Iiodpfx Aboy Ryvaevjc Make: Weiler Model: Condor B Year of manufacture: 2000 Technical data Manufacturer: Weiler Model: Condor B Year: 2000 Centre height: 165 mm Centre distance: 750 mm Spindle bore: 40 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle speeds: 45 – 2800 rpm Longitudinal feed: 0.015 – 3.7 mm/rev Metric thread pitches: 0.18 – 28 mm Main drive motor: 1.5 / 3 kW Dimensions (LxWxH): approx. 1.83 x 0.90 x 1.30 m Weight: approx. 1020 kg Equipment includes: - 3-axis Heidenhain digital readout - 3-jaw chuck - Operating manual - Collet chuck - Tool holder All information subject to change; no liability assumed. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Iisdpjy Rpr Refx Abvoc Turning diameter over cross slide: 198 mm Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: excellent (used), functionality: fully functional, Weiler Praktikant R 500 lathe In very good condition, turning test: 100mm, runout 0.005 parallel. Guideways and smooth running in all speeds are flawless. Turning diameter: 280 x 500 Spindle speeds: 42 - 2000 Spindle bore: 36 Ijdpszbhnqefx Abvsic 3-jaw chuck Röhm 160, live center, quick-change drill chuck, lighting, coolant system. Multifix A with 4 holders, additional accessories available upon request. Dimensions: L 1.42m, W 0.6m, H 1.24m, weight approx. 600 kg Can be inspected while powered on. Free loading at D - 88433 Schemmerhofen.