Used Weima Eco 600 for sale (90)

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Fpjdpfxotnz Tto Ah Uop Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 4,800 kg, rotor diameter: 368 mm, number of blades: 82, rotor length: 1,500 mm, power: 45 kW (61.18 HP), type of input current: three-phase, rotational speed (max.): 80 rpm, sieve perforation: 22 mm, input voltage: 415 V, extraction nozzle diameter: 250 mm, Just had the main shaft rebalanced, main bearings and housings replaced, gearbox end needed some work doing, gearbox checked and oil changed, all drive belts good, all in had just over £7k spent. Previously had the shredding screen replaced using Hardox with smaller holes cut for finer shred, has front mounted conveyor feeding through a magnetic separator as pictured, dust extractor and of course main control panel. All was working as it should be and then it was turned off, about 4 months ago, so needs to go back to work for someone. Looking for offers over £8K Fpedoxp Nm Njpfx Ah Usp Shredder located in Carlisle.

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Fpsdpfownx Uiox Ah Uep Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: excellent (used), Catalogue number 7672 TECHNICAL DATA - Loading hopper inlet: 1200x1000mm - Outlet for processed wood: diameter 160mm - Rotor working width: 980mm - Main motor: 18.5kW - Number of knives: 24 pcs - Knife size: 30x30mm - Screen: 20mm - Feed drawer - Electric auto-reverse Fodpowrpv Eofx Ah Uopp - Dimensions (L/W/H): 2500x1700x1850mm - Weight: approx. 2500kg ADVANTAGES – Made in Germany – Auto-reverse – Feed drawer – Very good condition – Used chipper Net price: 85,900 PLN Net price: 20,450 EUR based on an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 990-185, overall weight: 4,500 kg, input current: 80 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 1,000 l, noise level: 83 dB, Equipment: cooling unit, emergency stop, The WEIMA TH1500 briquetting press compacts all materials suitable for pressing within a single die. The resulting briquette is dimensionally stable and alternately ejected, ensuring smooth and continuous operation. The axial piston hydraulic pump, powered by a 30 kW motor, produces up to 7 briquette cubes per minute. A distinctive feature of this model is the precision die where the pressing process takes place. The movement sequences of the cylinders and the die are monitored and controlled by a displacement measurement system, ensuring high accuracy, repeatability, and consistent briquette quality. Technical Data: Hydraulic system motor power: 30 kW Operating voltage: 400 V / 50 Hz Nominal current: 80 A Fedpjxtm Ilefx Ah Uepp Protection fuse: 125 A Current drawn by hydraulic system: 55 A Machine weight: 4500 kg Oil tank capacity: 1000 l Output: approx. 7 briquette cubes/min Other available machines: Serial no. 990-184 – Year 2014 Serial no. 990-224 – Year 2018

Condition: good (used), Year of construction: 2016, operating hours: 5,460 h, machine/vehicle number: 510-2081, We are selling our shredder. Weima WL 4 Wood Shredder Year of manufacture: 2016 Used, but reliable! For sale is a pre-owned Weima WL 4 single-shaft shredder from 2016. The machine has completed a total of 5,450 operating hours and, aside from normal wear on the knives, is in fully functional condition. ✅ Technical data: Fjdpfx Ahew Ihh Do Ujpp Model: Weima WL 4 Year: 2016 Operating hours: 5,450 Condition: Used, technically sound Note: The knives should be rotated, resharpened, or replaced as necessary 🔧 Suitable for: Wood waste, chipboard, MDF, pallets, and much more. The machine has been regularly maintained and is immediately ready for operation – ideal for small to medium-sized woodworking shops looking for a reliable wood shredding solution. If interested, please get in touch.

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Fodjil Hggepfx Ah Uspp Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Dimensions (L/W/H) 1700x1130x1595 mm Weight 1300 kg Number of working hours 1741 h WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on Fpodsvvx Dzjpfx Ah Uep special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: excellent (used), Single Shaft Shredder Weima Model: WLK2000 Fedpsxdcq Dsfx Ah Ujpp Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm Fedpfxow Tbw Ae Ah Ujpp - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,192 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, number of blades: 70, type of input current: AC, WEIMA FineCut 2500-800 shredder Machine in good working order, used in the production of alternative fuel. Currently out of use, ready for loading. Fpedswh Rcfopfx Ah Uep

Condition: good (used), Year of construction: 1999, Chipper with inclined feed, suitable for roofers and carpenters, ideal for shredding roof battens with nails. Max. feed opening: 400 x 80 mm Slow speed: 250 rpm Motor: 18.5 kW Large rotor diameter Large knives 40 x 40 mm, set diagonally Fsdpfx Ahoxlm Ntj Uspp

Condition: new, Year of construction: 2024, your benefits Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on stable base frame with rubber feet Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Location: Ex works - free loading Fsdpscnz U Eefx Ah Uopp

Condition: used, functionality: fully functional, overall weight: 2,000 kg, filling opening length: 600 mm, filling opening width: 700 mm, type of input current: three-phase, Weima ZM 30 S Shredder Motor power: 2 x 18.5 kW! Chamber dimensions approx. 600/700 mm. Screen. Weight approx. 2000 kg. Additional second set of knives included. Price on request. More photos and a working video available upon request. Testing can be arranged. Fedpfx Ahsxlk T As Uopp For more information, please call.

Condition: excellent (used), Year of construction: 2018, Single Shaft Shredder Weima Fpjdjxdclbspfx Ah Usp Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Fpedpfx Asw U Txuoh Uop Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: used, machine/vehicle number: 13163, Rotor diameter: 368 mm Rotor width: 1000 mm Rotor blade: 52 Stator knife: 1 Inlet cross-section approx. 1000 x 1200 mm Fedpowhgpnsfx Ah Uepp Drive motor: 37 kW

Condition: used, Year of construction: 1992, functionality: fully functional, fuel type: electric, – German-made – Year of manufacture: 1992 TECHNICAL PARAMETERS: Fpodpfxow Iqbyj Ah Usp - Feed opening: 600 x 800 mm - Rotor diameter: 175 mm - Rotor length: 600 mm - Total power: 18.5 kW - Number of knives: 14 pcs - Rotating crown cutting knives: 30 x 30 mm - Screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC DRAWER - Height of pressure drawer: 180 mm - Rotor speed: 80–120 rpm - Extraction connection diameter: Ø 200 mm - Dimensions (L/W/H): 200 x 120 x 120 cm - Weight: 1200 kg

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Fpodpfopdqzxox Ah Uop Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Fpedpoxdckkofx Ah Uop Rotor knives size: 40x40x23mm

Condition: used, machine/vehicle number: 13292, Rotor diameter: 368 mm Rotor width: 1500 mm Fpjdowmg Sgopfx Ah Ujp Rotor blades: 82 Stator blades: 1 row Drive motor: 90 kW

Condition: new, Year of construction: 2024, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Fpjdpfxobtnf Eo Ah Ujp hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2018, Single Shaft Shredder Weima Fsdpfx Aoxdb S Toh Uepp Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Condition: new, Year of construction: 2025, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Fpjdpfjcbtpksx Ah Usp Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Fpodpfstnz Hbox Ah Usp Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg