Used Welding Rectifier for sale (5,579)

Condition: used, Technical data: see image Ksdsxz Amyspfx Agzefa

Condition: used, Marking plate, straightening plate, spotting plate, cast plate 3000x2000 Working height 900 Weight approx. 7.5 tons Loading by crane possible Kjdpfx Agsv Np Eiezefa

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Start via foot pedal Kodpotuwz Iefx Agzofa

Condition: as good as new (ex-display), Year of construction: 2025, SRF master figure left 2 m suction arm Scope of application Low smoke and dust Sporadic usage Use Little run the extractor hood required Flexible by additional hose connection rear Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Ksdpfx Agjdqzbrezefa Push handle and cable holder Procedure filter type disposable filter filter surface approx. 12 m² ᐳ 99% filtration efficiency 3-stage filter material glass fibre welding smoke off vagina class W3 Additional filter two prefilter basic data suction capacity Max 950 m ³/h diameter extraction arm Ø 150 mm length extraction arm 2 m diameter suction connection Ø 150 mm electrical connection 230 V / 50 Hz motor 1,1 kW sound pressure level 72 dB(A) dimensions (W x D x H) 705 x 655 x 900 m m weight approx. 71 kg

Condition: good (used), Year of construction: 2009, functionality: fully functional, For sale is our Reis welding robot in good condition. The welding robot comes complete with enclosure and is immediately available. (Technical data can be found in the photos.) Type: Reis RV 20-16 Control and operating unit: PHG 10-2 The system is located at our plant in Hungary / 2699 Szügy and is being sold ex works. (Dismantling can be arranged in consultation with the buyer.) We would be pleased to welcome you for an inspection and demonstration of the system (by appointment). The system is being sold with the non-perforated welding table only! (see last photo) The perforated version is not included in the sale. Kjdpowra S Defx Agzofa We will be on company holiday from 19.12.2025 to 06.01.2026. From 07.01.2026, we will be available for you again.

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how. Kfedpfxjmk S Slo Agzja

Condition: used, Technical details: Kfedpfx Ajwrq Txsgzsa welding current: 500 A Length: 1200 mm height: 1260 mm connected load: 26,6 kVA connected load: 100 kW open-circuit voltage: 65 V machine weight approx.: 147 kg dimensions of machine: 1,2 x 0,45 x 1,2 m

Year of construction: 1998, condition: good (used), Edge milling machine, manufactured by IMAC year of construction 1998 Kfedox Hhgfepfx Agzja . Model : CB 18 . Series : B20 .

Condition: used, filter area: 40 m², suction capacity: 4,000 m³/h, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Kfsdpfsxz Dy Usx Agzea

Condition: as good as new (ex-display), Year of construction: 2025, SRF Maxi. (Picture on the right) 3 m suction arm Scope of application Medium smoke and dust Regular usage Use Little run the extractor hood required Contamination free filter change Safe operation due to phase sequence detection High efficiency due to long Service life of the filter Properties Safe operation through filter monitoring Extractor hood 360 degree rotating and swivelling Automatic start/stop system (optional) Workplace lighting (optional) Technical data Procedure 2-speed Filter type disposable filter Filter surface approx. 20 m ² ᐳ 99% filtration efficiency Filter material of non-woven polyester Welding smoke off vagina class W3 Additional filter pre-filter (ALU knitted fabric) Basic data suction capacity Max 1,100 m³/h Extraction arm diameter Ø 150 mm Extraction arm, length 3 m Diameter suction connection Ø 150 mm -. Power supply 3 x 400 V / 50 Hz Motor 1,1 kW Kfodpsdqzcvefx Agzsa Noise level 70 dB(A) Dimensions (W x D x H) 790 x 815 x 1080 mm Weight 71 kg approx. 120 kg

Condition: good (used), Year of construction: 2003, Kistler U1000H Year of manufacture: 2003 Rotational speed: 0-70 cm/min Motorised adjustment + rapid traverse Weight: 580 kg Tube diameter: 28-800 mm Kfsdpfxox Ed Rbo Agzsa Max. load: 2000 kg 380 Volt Dimensions (approx. in mm): 2480x1700x1050

Condition: used, Year of construction: 2024, functionality: fully functional, Cobot Universal Robots UR10e incl. Control Unit and Lorch S5-RoboMIG XT + Kemper VacuFil Compact Extraction System For sale is a used Cobot UR10 including welding system and extraction unit as a package, fully operational. The machine/package is offered on behalf of a client. COBOT + S5-ROBOMIG XT: The Lorch S5-RoboMIG XT welding unit is equipped with a special cobot interface and a water cooling system with increased cooling capacity. The interface/control panel as well as the wire feeder are housed in a separate feeder case (1m intermediate hose package). The package comes with an LMR 450 W EVO torch with a 3.5m cable length. The package includes a full feature set with the following licenses: • Motion (enables control of turntable and linear axis) • Assistant+QuickPoints (enables programming via multi-flange) • Weaving (oscillation – linear and radial) • Seamtracking (seam tracking to compensate for tolerances) • Smartcopy (enables easy copying of programs) • TouchSense (enables component position detection via probing with the gas nozzle) • Fume Extraction (enables control of torch extraction system) The package also includes a Cobot Move 2400 linear axis with a travel range of 2m, extending the working area to 4.5m. The travel speed can be set between 2 and 160 mm per second. Both the cobot and the Move linear axis are collaborative. Additional accessories: jib boom, balancer 1–2 kg, cable holder, Lorch Connect Gateway KEMPER VACUFIL COMPACT: The high-vacuum extraction device VacuFil Compact is designed for high volumes of welding fume and dust and is also included. It features a large, cleanable filter and easy one-button operation—even while wearing gloves. Numerous additional features are available, such as automatic airflow control. The side channel blower for negative pressure generation ensures robust performance for industrial users. For further technical data, please refer to the data sheet. SIEGMUND BRIDGE: Kjdox E U Rhjpfx Agzofa The package is completed with a bridge from Siegmund. Cross beams, machine stands, and the rotary device are also included. The total package price is as follows: Cobot UR10e incl. welding machine = €67,500 Kemper VacuFil Compact extraction = €4,200 Bridge by Siegmund = €2,500 Our customer, the owner of the complete system, purchased the package at the beginning of 2024.

Condition: good (used), 450 A with premium panel. 16 units available. Price per unit: €2,500 excl. VAT. Kedox Emufopfx Agzofa

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21002752, type of input current: AC, overall weight: 105 kg, input voltage: 230 V, total width: 650 mm, total length: 950 mm, total height: 2,120 mm, volume flow: 950 m³/h, power: 0.5 kW (0.68 HP), arm reach: 1,800 mm, next inspection (TÜV): 12/2026, Equipment: type plate available, ESTA 55503 Airbox W3 in very good condition, captures air containing dust and welding fumes, year of manufacture 2021 Kjdpfxjx Exlvs Agzofa

Condition: used, Year of construction: 2012, operating hours: 3,745 h, type of input current: three-phase, filter area: 20 m², suction capacity: 4,600 m³/h, negative pressure: 2,800 Pa, Dust extraction unit, welding fume extractor, pneumatic vacuum filter unit and absorber by ULMATEC, designed for plasma cutting, laser cutting, sandblasting, welding dust and fumes, as well as all types of dry dust. Cartridge filter elements cleaned by compressed air. The fan is positioned behind the filter on the clean-air side, minimizing the risk of explosion. Model: IEP 20-2-2 Fan power: 2.2 kW Kfedpsxz Dr Rofx Agzsa Max airflow: 4600 m³/h Max vacuum: 2800 Pa Number of filter cartridges: 2 Filtration area: 20 m² Inlet diameter: 180 mm Year of manufacture: 2012 Operating hours: 3745 h Inventory number: 1083

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Kfsdjup Uzxepfx Agzsa Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: good (used), Year of construction: 2023, machine/vehicle number: 10452, Offer 25497 Technical Data: - Load capacity: 1200 kg - Faceplate diameter: 1200 mm - Faceplate motorized and steplessly tiltable: 0 – 135° - Motorized rotary movement steplessly adjustable: 0.05 – 0.5 rpm - Table height in horizontal position: 1160 mm - Electric foot switch - 3-jaw chuck Kfodpjx Ek Rqefx Agzsa - Required space: approx. W 1200 x H 1200 x D 1600 mm - Weight: approx. 800 kg

Condition: used, Synergy operation, simple handling, and job memory, combined with the proven Control Weld and Rapid Weld processes: thanks to these features, the QINEO Tronic welding power source delivers top welding results. Further advantages of the QINEO Tronic include its compact design, flexible configuration options, and optimal efficiency. The QINEO Tronic offers excellent value for money in manual welding applications. Kfodpfx Agow I Ry Nezsa - Differentiated and precise: infinitely variable parameter adjustment for manual applications - Top quality: optimal ignition and welding characteristics - Superior results: synergy operation with intelligent one-button operation for all common materials, gases, and welding wires - Practical and flexible: wide range of applications thanks to its low weight

Year of construction: 2019, condition: new, VM-2400/4-8 BB-Basic wire mesh machine is ideal solution for rebar shops and factory of reinforcing mesh with not large capacity. In addition to the low price, the advantageof this machine is inexpensive and easy maintenance, as well as the possibility of designing a machine according to your technical characteristics. Kfedpfxed Tfnpe Agzea TECHNICAL DATA: • Line wire diameter: Ø 4 ÷ 8 mm • Cross wire diameter: Ø 4 ÷ 8 mm • Line wire pitch: 150, 200 mm • Cross wire pitch: 150, 200 mm (fixed) • No. of electrodes: 16 • No. of cylinders: 8 • Mesh panel width: 2400 mm • Mesh panel length (min-max): 2 ÷ 6 m • Stroke (welding)/minutes: 35-40 cross wire/min • Feeding of line wires: bars • Feeding of cross wires: bars

Condition: new, Year of construction: 2025, functionality: fully functional, arm reach: 1,000 mm, User-friendly operation – fast programming without prior robot experience Hand-guided “drag” function: The CRP welding cobot can be easily moved by hand to the welding point. You simply guide the arm into the desired position, without complex controls or programming. Unique end-effector with joystick: The integrated rocker allows you to move the welding torch in six directions (X/Y/Z + rotations) for precise or fast positioning directly at the weld point. Kfjdpfxex Dk Sie Agzsa Rotation range: maximum –360° to +360° Maximum rotational speed: up to 250°/sec for rapid movements between welding positions Automatic point registration: With the push of a button, position, movement mode, and welding parameters are saved. This lets you create a welding program in just a few minutes. Complete welding package – plug & play solution Includes welding table for positioning and clamping your workpieces. Includes 350 A Megmeet MIG/MAG semi-automatic welder with pulse function and welding torch. Result: fast commissioning, reduced programming time, and a cobot installation that any welder can operate—even without industrial robot experience.

Condition: excellent (used), Year of construction: 2021, suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. Designed for welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with dust-free collection. The mobile KEMPER MaxiFil Clean cartridge filter is intended for continuous operation and is suitable for filtration of welding fumes and high-concentration dusts. Suitable for use in all welding methods of carbon steel, low-alloy and high-alloy steels, as well as aluminum. Economical to operate thanks to the long service life of the filter cartridge. With IFA-W3 certification, the basic version of the filter can be used for welding high-alloy steels. Comes complete with a Start-Stop system for automatic switching of the unit on and off. Specifications: - Airflow: 1,100 m³/h - Maximum vacuum: 3,200 Pa - Three-phase fan, 1.5 kW - Filter surface area: 15 m² - Year of manufacture: 2021 - Cartridge filter element with PTFE membrane - Filtration efficiency: >99.97% - Built-in delay timer in start-stop mode. - When connected to a start-stop sensor (optional), the extraction delay time after welding can be set from 5 to 60 seconds. - The unit is in very good condition. Kfjdpfetq E Siex Agzja Stock no.: 0976

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) 1 x PC for Laser with LaserNet software. Kedpfxjh Ad E Hj Agzsfa Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2019, condition: like new (used), Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20D.(Payload: 20kg, H-Reach: 1717mm, Robot Mass: 280kg, 2009.01) 1 x YASKAWA DX100 controller.( 2009.02 ) 1 x LASERLINE LDM 1200-60 Diode 1320W Laser.(2015.10) Kedpfx Ageh Aiy Sszsfa 1 x LASERLINE laser welding head OTS-5 with Crossjet and cam.(2017.12) 1 x Cooling water circulation 2 way system HYFRA Sigma7 for laser and optics.(2018) 1 x siegmund table 1200x800.(2019) Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: like new (used), Year of construction: 2018, Set for robotic plasma welding . Kfjdpfx Aerfuc Hogzea Shipping to EU countries is our responsibility and the shipping cost is free.

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Kjdpsrfucqjfx Agzofa Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.