Used Wire Binding Machine for sale (67,865)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Vertex 2 Year of manufacture: 2007 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.05 µm Ra Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered on request. Bjdpfxsxwb Sts Aftsld

Condition: ready for operation (used), functionality: fully functional, Automatic cable cutting / crimping / dismantling machine High daily productivity thanks to quick changeovers. On average, a crimping machine can produce between 700 and 1300 crimps per hour. This machine can crimp terminals ranging from 2800 to 3200 units. Additionally, the machine can test the connections it crimps! - Flexibility and diverse applications - Maximum uptime with minimum maintenance Blsdpox H Um Sofx Aftod - Integrated quality measurement devices - Intuitive and user-friendly machine operation

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, The fully automatic Alpha 530 single-core cable processing machine for crimping and fitting rubber seals on both sides meets the highest quality standards for cable cross-sections from 0.13 to 6 mm². Bodpfsx H Ualox Afteld

Condition: used, Year of construction: 2012, Travel distance: Blodpfx Aeuu Dl Rjftod X 500 mm Y 350 mm Z 300 mm Water bath machine Automatic wire threader

Condition: excellent (used), Year of construction: 2021, operating hours: 537 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 650 mm, travel distance Z-axis: 200 mm, total height: 2,215 mm, total length: 2,820 mm, total width: 1,700 mm, wire diameter (max.): 0.2 mm, workpiece height (max.): 510 mm, workpiece width (max.): 510 mm, workpiece length (max.): 510 mm, type of input current: three-phase, overall weight: 3,220 kg, empty load weight: 3,320 kg, feed length X-axis: 650 mm, feed length Z-axis: 200 mm, feed rate X-axis: 240 m/min, feed rate Z-axis: 240 m/min, table load: 500 kg, input voltage: 400 V, working range: 510 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, tank capacity: 930 l, cutting speed: 240 mm/min, travel speed (max.): 240 mm/min, input frequency: 50 Hz, input current: 11 A, Equipment: documentation/manual, 2021 Agie Charmilles CUT AM 500 Wire EDM Machine Discover premium Swiss precision with this 2021 Agie Charmilles CUT AM 500 CNC Wire EDM Machine This high-performance wire EDM machine has only 537 erosion hours and comes from a medical device manufacturing environment, ensuring meticulous maintenance and minimal wear. Ideal for high-precision applications in medical, aerospace, automotive, and mold-making industries. Machine Overview Make/Model: Agie Charmilles CUT AM 500 Machine Type: CNC Wire EDM Machine Year: 2021 Control System: GF Control Erosion Hours: 537 hrs Condition: Very Good – ready for immediate operation Technical Specifications Work Area Max. part dimensions: 510 x 510 x 510 mm Blsdpextfwxefx Aftjd Max. part weight (base + parts): 500 kg Dielectric level (min/max): 250–305 mm Performance Max. machining speed: 240 mm²/min Surface roughness (Ra):

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Machinetype: barbed wire machine Bljdox Ea E Iepfx Aftod Make: WAFIOS Type: STH2 Constr. year: 1981 line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,5 mm output - meter/min: 25-38 Location: Europe

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Bledex I Akuepfx Aftod Travel Distances X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Overall weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of mains supply: 3-phase current EQUIPMENT Manual central lubrication for CUT E series Heat exchanger kit Large wire spool accommodation 25 kg, CUT E series Wire chopper for CUT E series Signal lamp Note: Dismantling and loading can be carried out by the seller at an additional cost.

Condition: excellent (used), functionality: fully functional, We are offering a used System 3R-217-1 Marco Block here. The chuck is in very good condition and fully functional. Viewing by appointment possible. Shipping and viewing available! Bedpfoxphvcex Aftold

Condition: good (used), Year of construction: 2005, Brand: CMC ITALIA Model: HSV 70-20 Year of manufacture: 2005 Automatic lining and laminating line - Automatic gluing machine Heliomat - Carton Spotter - Glue viscosity mixer 1) HELIOMAT HLM75 Gluing Format: 75 x 115 cm, high-pile feeder Paper size: 70 x 110 cm (max.) | 10 x 15 cm (min.) Mechanical speed: 20 pcs/min Machine control and adjustment via computer or manual operation of main functions. Servo drive for speed and precision Electronic speed regulation Glue recirculation Option includes glue mixer and viscometer Detachable feeder for easy cleaning of the gluing unit Continuous paper feeder Standard conveyor belt 1.5 m Paper detection via photocell Reduced maintenance and cleaning times Quick setups Power supply: 7 kW Weight: 820 kg 2) SPOTTER SPT110 Carton feeder Format: 70 × 110 cm, with external pre-loading Automatic positioning via photocells for 1 to 5 sheets of carton on glued paper Easy and fast format changeover Carton thickness: 0.5 to 4 mm Carton format: max. 70 x 110 cm, min. 15 x 20 cm Mechanical speed: 20 pcs/min Included: loading hopper with original ramp. 3) VIRGO 70 Casemaker Format: 70 × 110 cm, 4-side version Automatic folding from all four sides High precision and power folding on all four sides Easily calendered filling Output data on delivery table Calendar cycle for cover page and edge-to-edge gluing Carton thickness: 1.5 to 4 mm Carton format: max. 70 x 110 cm, min. 14 x 16 cm Mechanical speed: 20 pcs/min Bljdpex Npb Nsfx Aftjd Power supply: 3 kW Weight: 960 kg

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Bledpfx Afexq Akwetod Year of manufacture: 2018 Travel (X/Y/Z): 220 x 160 x 100 mm Travel (U/V): +/- 40 mm Max. taper: 3° at 80 mm height Wire diameter: 0.07 mm to 0.20 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER handbox for convenient machine setup 15" LCD color screen with lift-up keyboard and mouse AGIEVISION control Includes AGIESETUP 3D Includes AGIEDUO twin-wire system for automatic switching between two wire diameters Machine dimensions: 1400 x 1900 x 1970 mm Machine weight: 2700 kg The machine is cleaned, completely overhauled, and thoroughly tested by our specialists. We are happy to set up the machine at your location and provide thorough training on both operation and control.

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! We do not know what is the probleme! Blodpfx Afoik Hb Tetsd

Condition: used, Year of construction: 2003, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Bljdpfovyhmtsx Aftod Long materials can be pushed through a tunnel in the middle of the machine. The binding machine can bind long materials together by knotted loops. Dq98On The machine is suitable for binding single and double strings. The binding machine can add any number of loops to long materials. The elastic cord keeps the joined materials together during transport.

Condition: used, Year of construction: 2004, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. The binding machine can be used to bind long materials together using knotted loops. The machine is suitable for binding single and double strings. The binding machine can be used to attach any number of loops to long materials. The elastic cord holds the joined materials together during transport. Bedpovyhl Nsfx Aftjld

Condition: good (used), Year of construction: 2004, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. Bsdpfxjvyhhqs Afteld The binding machine can be used to bind long materials together using knotted loops. The machine is suitable for binding single and double strings. The binding machine can be used to attach any number of loops to long materials. The elastic cord holds the joined materials together during transport.

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 03DR2150, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,150 mm, total length: 2,687 mm, total width: 3,030 mm, overall weight: 3,500 kg, Equipment: cooling unit, Wire-Cut EDM Machine The machine comes from productive operation and is in fully functional, used condition. All relevant assemblies are complete; the generator cabinet, control system, wire feed, and AT system (Automatic Threader) are all present and complete. Running times according to control system: Processing time: approx. 29,062 h NC on-time: approx. 43,836 h Ready-/TFT downtime: approx. 8,966 h Maintenance records (excerpt): Filter change: last performed at 176 h / 200 h Resin change: 21 h / 1000 h Oil refill: 742 h / 1000 h Conductivity sensor: 742 h / 1000 h Current supply rotation: 57 h / 80 h The machine is complete but shows typical signs of use after more than 10 years in operation Accessories are extensive and well organized Servicing always confirmed as per control system Automatic threading system included Accessories / Equipment: Original Mitsubishi nozzle & roller/bearing kit: various guide rollers upper and lower diamond guides nozzle set (upper/lower nozzle) drying stones / assembly tools NSK/Japan replacement bearings spare tension rollers Manufacturer’s wooden box Mitsubishi Electric Spare and consumables: resin container (packed) filter elements quick adhesive components A/B pH test strips process chemicals (for EDM) logbook / maintenance records Documentation / manuals: complete folders: Operator’s Manual MV Part 1 & 2 training materials “Advance Series” operating instructions (German) maintenance and AT maintenance sheets Travels (X / Y / Z): 600 × 400 × 310 mm Working table / workspace: table size: 840 × 640 mm (square table) max. workpiece dimensions: 1050 × 800 × 295 mm max. workpiece weight: 1,500 kg Wire data: wire diameter: 0.1–0.3 mm max. wire feed: 23 m/min tension: 0.5–25 N automatic threading (AT), including fine-threading Taper cutting: opto-linear T/C device, ±75 mm (X/Y), max. taper angle 15° at 260 mm workpiece height Generator / Control system: transistor-controlled pulse generator 15" LCD touch control 6-axis simultaneous control integrated 2D and 3D CAM (Parasolid viewer) NC memory up to 1 GB USB interfaces (2×) Bsdpex Hadvsfx Aftsld Dielectric system tank capacity: 860 l filter flow rate: 50 l/min paper filters (2 pcs) resin container 10 l (ion exchanger)

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Bledpow Swd Ajfx Aftsd

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIECUT Classic 2S Year of construction 2006 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 - 0.33 mm Blsdjuzvkgspfx Aftjd Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: used, wire diameter - max. 10 mm wire diameter - min. 3 mm wire length 8 m total power requirement 7,5 kW Bsdswu Hg Hjpfx Aftsld weight of the machine ca. 1,1 t dimensions of the machine ca. LxBxH 2,53 x 0,75 x 1,1 m

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Blodpfx Aoxnkbljftsd Travel X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Work Table Table dimensions: 780 mm x 630 mm Table load capacity: 1,500 kg Taper: 10° / 150 mm U/V-axis travel max.: 30 mm Maximum workpiece dimensions: 1,050 mm x 800 mm x 295 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 mm x 2,460 mm x 2,100 mm Weight: 3,500 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Worktable dimensions: 590 x 514 mm Bsdpfx Afexni T Hotjld Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Machining time: 11,560 h Control total on-time: 65,288 h

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 9710C365, workpiece weight (max.): 250 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, controller model: FANUC SERIES 16-W, No reserve price – guaranteed sale to the highest bidder! Blsdpfx Afexnl Umotod The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Travel distances Travel X-axis: 320 mm Travel Y-axis: 220 mm Travel U-axis: 120 mm Travel V-axis: 120 mm Travel Z-axis: 180 mm Max. workpiece weight: 250 kg Feed rate in X and Y axes: 900 mm/min In U, V and Z axes: 450 mm/min Table dimensions: 530 x 330 mm MACHINE DETAILS Control: FANUC SERIES 16-W Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,400 mm Weight: 3,000 kg EQUIPMENT Coolant tank

Year of construction: 2001, condition: good (used), Travel X / Y / Z: 220 x 150 x 150 mm Z-axis device: standard equipment (= 5th axis) Max. taper angle: 15° (for workpiece 100 mm thick) Taper machining unit: standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 - 0.25 mm dimensions L x W x H 1900 x 2345 x 2060 mm Weight 3500 kg Siegfried Volz Machine Tools Blsdpfx Aeg Icdysftjd Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: new, At Wöhler, we have developed a range of wire processing machines that are primarily used in the brush industry. They can roll round wire into flat wire, count and bundle individual wires and crimp or cut both individual wires and entire strands to a specific length. There are also solutions for rewinding or coiling and twisting individual wires into strands. Blsdpfxexzttko Aftsd Cut wire strands to an adjustable length and knot the sections into bundles with the Wöhler WCB 200. Produce Bucher tufts with the FWB 700. Roll round wire into flat wire with the FWR 250 - including automatic wire thickness regulation. Wind this flat wire onto spools with the DC 510, cut it to size and bundle the counted sections. Wave, cut and bundle wire strands with the DA 400 or the DA 700. Wave and wind wire strands with the STW 87, the STW 96 or the USTW 6000. Spool up to 44 individual wires into one strand - optionally including twisting. Get in touch with us. Together we will also find solutions for tasks not mentioned here.

Condition: ready for operation (used), Technical characteristics 4 hot wire bending heads Blsdpstv Tipjfx Aftsd useful length 2000 mm PMMA and methacrylate folding with a thickness of 1 mm to 20 mm adjustment of the gap between the wires 3 wires above / below per group Power and Motors Overall dimensions

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB Control Travel paths: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, Max. workpiece weight 500 kg, Machine weight 1,700 kg, Bjdpfjwl Hiijx Aftjld Power supply 13 kVA The machine can be inspected while powered.