Used Wire Comb Binding Machine for sale (68,384)

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 Dkjdon Ut A Sjpfx Apwor comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt 50 Hz 30 Kw Production year: 1997

Condition: reconditioned (used), Year of construction: 2010, operating hours: 27,000 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 200 mm, total length: 205 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, empty load weight: 2,450 kg, Machine fully cleaned, inspected, and tested. Available for viewing at our premises in Semsales (Switzerland). Wire guides, 0.25 mm. Dodpfxozf Akyo Apwekr Large bobbin kit.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Workpiece weight max.: 200 kg Dedozf E Nxjpfx Apwekr Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm Dkedpfx Apew Spa Njwor max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: new, functionality: fully functional, Crimp force controller. Dsdpfx Apjy Ivdbewokr

Condition: good (used), Year of construction: 2002, functionality: fully functional, Gamma 333 fully functional. Dkedpfjy Ah R Nex Apwjr

Condition: ready for operation (used), A Schneider hot-melt perfect binding machine is available. Cover material weight range: 82g-300g/m², max. binding length: 320mm, min. book block dimensions X/Y: 60mm/120mm, max. book block dimensions X/Y: 320mm/300mm, min. cover dimensions X/Y: 330mm/480mm, max. cover dimensions X/Y: 330mm/680mm, book thickness range: 2mm-50mm, max. binding capacity: 300books/h. Machine dimensions X/Y/Z: approx. 1400mm/700mm/1350mm, weight: approx. 250kg. An on-site inspection is possible. Dkedpezfp Ilofx Apwer

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 0/41938, BDM20 case maker (book cover machine), 1992 Dodpfx Apsxqd I Djwekr

Condition: good (used), Year of construction: 2018, 1 used CNC wire EDM machine Make: Sodick Model: AQ 750 L, year 2002, overhauled by Sodick in 2018 4000 operating hours since overhaul Control: MARK 30 LN 1 W Dsdpfxeyknpgs Apwskr Wire threading: 97 Pipe AWT

Condition: as good as new (ex-display), functionality: fully functional, type of input current: AC, SWIGRAPH - MARLON 5000 PVC Coil Forming Machine. Automatic PVC/PET forming machine for plastic coils. Dkedpfx Apsv Ifc Iowjr Coil diameter range: 6mm to 56mm Cut lengths: 7.62cm to 122cm Coil pitch: 4;1 Power supply: 230 vac + external air supply

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P5-0174, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 175 kg, space requirement height: 1,097 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, table width: 1,070 mm, input frequency: 50 Hz, empty load weight: 105 kg, Equipment: safety light barrier, Double Loop closing machine for books and calendars. Adjustable sizes for all diameter rings up to 25 mm Footswitch controlled. Light beam safety guard. Power requirements: 380-415 v 50/60 Hz Djdjrzulujpfx Apwokr

Condition: good (used), Year of construction: 1998, Specifications: Maximum size 320 x 440 mm Minimum size 100 x 150 mm Dksdpfxozbu Uke Apwor Max speed MX gathering machine 100 cycles/min Max stack height - Plus stacker 150 mm Consisting of: Gathering machine: Raccoglitrice MX - Hand feeding station - Number of gathering stations: 21 - Optical sheet control - Pump(s) - Distribution unit: MX Modulo - Colour monitor with touch screen - Distribution section into 3 sewing machines Sewing machine (1) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump Sewing machine (2) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump Sewing machine (3) Meccanotecnica Aster 2000 Year: 1998 - Automatic setting - Pre-loader sistema - 4 + 4 opening possibilities - Plus stacker - Including pump

Condition: like new (used), Year of construction: 2013, DEVICE AFTER INSPECTION READY FOR OPERATION Dkedpfx Apjpy D A Sewjr

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Dedpfx Aszbimhepwskr Dielectric volume: 1,700 liters. INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Distance from floor to table: 900 mm Dksdpfx Apjza U Nljwer Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, You get two machines for the price of one. One is fully functional and in good condition for its age, equipped with a collecting system (sliding slats). The other can be made functional again with minimal effort, but the new owner can also use it for spare parts (all electrical cards are intact; the pump system and wiring harness require repair). Dodpfx Apszcww Rjwskr The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision of the German Matra machine tool engineering.

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Djdpfx Apeytkdrewjkr Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Year of construction: 1998, condition: ready for operation (used), X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible. Dkjdszadkxspfx Apwjr

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM wire Dodpfewr Utisx Apwjkr The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2022, operating hours: 1 h, functionality: fully functional, For sale: İkra Makina IPM 2850 automatic strip and wire bending and forming machine. It features a 12-ton press capacity and a 15 kW servo motor. This ensures precise operation for wires with a diameter of 6-16 mm. The machine comes with tooling suitable for manufacturing pipe clamps. By using other tools, it can bend various types of wires and strips. It was never used for mass production. Only a few test pieces were made on it. Dedpfxsxuhd Ds Apwskr It is for sale due to a cancelled project. The offer includes the 6 tools, the press machine, and the matching nut welding machine. The sizes of the current tools are: • 40-44 • 48-54 • 55-59 • 60-66 • 68-73 • 75-80

Condition: like new (used), Year of construction: 2025, Maufung MF-Smart390A Auto Book Casing In & Joint Forming Line Model: MF-Smart390A Power Supply: 380V, 50HZ Mainframe Power: 9kW Block Thickness: 2–60mm Block Size (Max): 390×297mm Block Size (Min): 100×100mm Mechanical Speed: 600 pcs/hour Machine Dimensions (L×W×H): 4950×2650×2000mm Machine Weight: 2000kg Maufung Head and Tail Banding Machine Model: MF-HBM420 Dkjdpfx Apey Sv Inswjr Model: MF-HBM420 Power Supply: 220V, 1 Phase, 50HZ Mainframe Power: 1.5kW Air Compressor: 6Bar Machine Speed: 11 pcs/minute Book Block Thickness: 10–60mm Book Block Size (Max): 350×420mm Book Block Size (Min): 100×100mm Machine Dimensions (L×W×H): 700×850×1550mm Machine Weight: 270kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2012, functionality: fully functional, Book edge gilding machine from Swiss producer Ochsner in a very good conditions. Technology consists of 2 machines (sanding machine and gilding machine). Dkjdpfxoza Tqzj Apwor It includes 2 trolleys and 6 clamps for various book block sizes and filtration unit. Max format of book blocks: 230 x 320 mm Min format of boo blocks: 50 x 90 mm

Condition: used, Year of construction: 1973, functionality: fully functional, Consisting of: gluing units including two spare gluing rollers, rounding tools for cases in different widths -pre-heater and heated rounding unit -paternoster with press on unit -belt delivery Dedpfx Apsza Ti Rewekr 14 – 36 cycles per minute

Condition: ready for operation (used), Year of construction: 2000, Müller Martini Amyrs/Prima Year 2000, 8 stations, 1 cover feeder, stitching, three-knife trimming, stacker Production capacity: 14,000 units/hour Djdpfjy Siprsx Apwskr Min. format: 90 x 105 mm Max. format: 320 x 480 mm

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, wire diameter (max.): 0.25 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 400 mm Y-axis travel: 250 mm Dodpfxjyz Rxaj Apwekr Z-axis travel: 200 mm (U/V) axis travel: 400 x 250 mm Taper angle: +/- 30° at 200 mm height Workpiece weight: 500 kg Workpiece height (max): 200 mm Workpiece width (max): 500 mm Workpiece length (max): 850 mm MACHINE DETAILS Standard wire guides: 0.25 mm Dimensions & weight Dimensions (L x W x H): 1,800 x 1,600 x 2,180 mm Machine weight: 2,190 kg Injection pressure upper nozzle: 0 - 11.5 bar Injection pressure lower nozzle: 0 - 11.5 bar