Used Wolfcraft Drill Stand for sale (12,560)

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 072-003, workpiece weight (max.): 300 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, total height: 1,940 mm, total length: 1,340 mm, total width: 900 mm, type of input current: three-phase, overall weight: 910 kg, table length: 400 mm, table height: 300 mm, input voltage: 400 V, tank capacity: 20 l, input frequency: 50 Hz, input current: 30 A, Equipment: documentation/manual, Comes with accessories: set of pliers ranging from 1mm to 4mm. Dkedpfxezr D Dno Ap Iju

Condition: used, machine/vehicle number: F20325V00549, Year of construction: 2019, operating hours: 1,552 h, load capacity: 1,400 kg, lifting height: 4,266 mm, free lift: 829 mm, fuel type: electric, mast type: triplex, construction height: 1,915 mm, battery voltage: 24 V, fork length: 1,150 mm, front tire size: VULKOLLAN, rear tire size: VULKOLLAN, 5295516 Dedpez Hglzefx Ap Isku Serial Number: F20325V00549 Battery Details: 24 Volt

Condition: excellent (used), CATALOGUE NUMBER 7908 TECHNICAL DATA - tool diameter, Wescott chuck 0-20mm - max. hole depth 155mm - max. milling length 250mm - adjustment via drilling unit, forward/backward, right/left + angle - table adjustment, up/down - table swivel angle 0-45˚ - working table dimensions 600x320mm - four-point cutting head 16-22-25-32mm - 2 material clamps - motor power 2.2kW - dimensions L/W/H 1050x800x1250mm - weight 200kg ADVANTAGES - German made - very good condition - eccentric clamps, 2 pieces - unpainted - used drilling machine Dksdpozr I H Tefx Ap Isu Net price: 6500 PLN Net price: 1510 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 580 mm, feed length Y-axis: 200 mm, feed length Z-axis: 130 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 130 mm, spindle speed (max.): 3,200 rpm, spindle speed (min.): 100 rpm, spindle mount: MK 4, throat depth: 286 mm, quill diameter: 130 mm, quill travel distance: 130 mm, type of input current: three-phase, total length: 860 mm, total height: 1,200 mm, table width: 240 mm, input voltage: 400 V, total width: 740 mm, table length: 800 mm, drilling capacity: 45 mm, position of the milling head: ±90°, drilling depth: 130 mm, workpiece weight (max.): 375 kg, distance table to spindle center: 450 mm, Equipment: documentation/manual, rotational speed infinitely variable, Drilling and Milling Machine ZX7045B VARIO (with automatic spindle feed) – professional metalworking machine The ZX7045B VARIO drilling and milling machine is a solid and versatile machine designed for professional metalworking in workshops, production plants and tool rooms. The machine allows drilling, milling and tapping operations, making it a universal solution for many machining applications. The machine is equipped with a powerful 2.2 kW motor and infinitely variable spindle speed control in the range of 100–3200 rpm. The spindle is mounted on precision bearings ensuring high machining accuracy, while the gear transmission operating in an oil bath guarantees durability and quiet operation. The head can be adjusted in height and tilted ±45°, allowing machining at various angles. The automatic spindle feed and automatic spindle reverse during tapping significantly improve operator convenience. A large worktable measuring 800 × 240 mm with T-slots allows stable clamping of workpieces. The heavy-duty construction and base ensure high stability during operation. The machine is also equipped with a cooling system and an emergency stop switch. Technical specification • Model: ZX7045B VARIO • Max drilling capacity: 45 mm Dksdpfx Aoyvh Hqjp Isu • Max face milling diameter: 80 mm • Max vertical milling diameter: 32 mm • Max tapping capacity: M12 • Spindle taper: MT4 • Spindle travel: 130 mm • Spindle speed: 100 – 3200 rpm • Speed control: variable • Max distance spindle–table: 450 mm • Distance spindle axis–column: 286 mm • Table travel X: 580 mm • Table travel Y: 200 mm • Table size: 800 × 240 mm • Head: tilting ±45° • Motor power: 2.2 kW • Power supply: 400 V • Machine dimensions: 860 × 740 × 1200 mm • Weight: 375 kg Delivery to the customer is possible. Shipping cost is calculated individually by the transport company. If you are interested in other machines, please visit our website.

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 35 mm throat 330 mm bore stroke 180 mm table surface area 765 x 620 mm Djdpfjz Euv Eox Ap Ijku

Condition: used, Drills Grinding Machine DECKEL SOE Spindle speed: 4500 RPM Maxi bore of clamps: 17,5 mm Maxi sharpenable radius: 10 mm Maxi lateral displacement: 10 mm Dksdpfx Apoz H Iwfs Iou Angle adjustment: 45° Maxi displacement: 100 mm (see technical details) Delivred with 1 set of clamps + different diamond grinding wheels Voltage: 380 V Width: 600 mm Depth: 600 mm Total height: 1300 mm Weight: approx 150 kg

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 230 mm, travel distance Y-axis: 150 mm, spindle speed (max.): 3,300 rpm, spindle speed (min.): 320 rpm, spindle mount: MK 2, throat depth: 182 mm, quill stroke: 80 mm, type of input current: three-phase, total length: 650 mm, total height: 900 mm, table width: 152 mm, input voltage: 400 V, total width: 580 mm, table length: 420 mm, drilling capacity: 16 mm, Equipment: documentation/manual, NEW MTP ZX7016 400V DRO drill-milling machine "Zośka" with digital depth readout + vice – 400 V – 12 months warranty on parts – delivery to any destination in Europe Dkedpfx Apez Hz U Rs Iju The Metal Technics Polska ZX7016 is a compact 2-in-1 drill-milling machine for drilling and light milling in metal. Compact dimensions, simple operation and a solid construction make it ideal for workshops, garages, service departments and hobby metalworking. A true classic, known for its excellent value for money. This version adds a digital depth readout panel with zero-reset function: it shows the vertical travel of the tool in millimetres, so you can set a reference point, reset to zero and drill or mill to an exact depth – and repeat settings easily, without guessing. TECHNICAL DATA • Spindle taper: MT2 • Max. drilling diameter: 16 mm • Max. face milling diameter: 40 mm • Max. end milling diameter: 10 mm • Spindle speeds: 320–3300 rpm (12 speeds) • Spindle stroke: 80 mm • Table size: 420 x 152 mm • Table travel: 230 x 150 mm • Spindle to column: 182 mm • Spindle to table: 360 mm • Dimensions with base: 650 x 580 x 900 mm • Weight: 75 kg • Motor: 550 W • Voltage: 400 V / 50 Hz, three-phase STANDARD EQUIPMENT • Cross table with handwheels • Machine vice • Digital depth readout panel with zero reset • Drill chuck with chuck guard • 12-speed belt drive WARRANTY & DELIVERY • 12 months warranty on parts • Delivery to any destination in Europe – shipping cost calculated upon request • Price: EUR 415 net (excl. VAT) We ship to any address in Europe – the machine is carefully packed and delivered straight to your workshop. Get in touch and we will prepare a tailored delivery quote for your location.

Year of construction: 1990, condition: used, Controls: Heidenhain 3-axis digital readout, without clamping systems, tools and large table, with small table, machine makes noticeable operating noises, an on-site inspection is possible. Dkodpfxjz Ea R Io Ap Ieu

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Dkedpfxjzldquo Ap Ieu Type: AB 3 ESV Machine number: 17209 Year of manufacture: 1980 Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Overhang: 290 mm Quill stroke: 165 mm Column diameter: Ø 120 mm Equipment: - Coolant system - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH)

Condition: used, Year of construction: 2006, machine/vehicle number: 1799-260030, KNUTH WF 1 Universal Tool Milling Machine The KNUTH WF 1 is a compact universal tool milling machine for milling and drilling operations. In addition to the horizontal work table, the WF 1 has an additional vertical table, which provides a wide range of clamping and machining options. The vertical milling head can be swivelled by ±45° and has a manually adjustable quill with a stroke of 60 mm. Both spindles have a robust ISO 40 (SK40) tool holder. With travel distances of 300 x 200 x 350 mm, eight feed stages and separate speed ranges for horizontal and vertical machining, the machine offers high flexibility for a wide range of machining tasks. Technical data Djdpfx Apjzyy R He Isku Work table: 270 x 700 mm T-slot spacing: 50 mm Vertical table: 260 x 710 mm T-slots, vertical table: 2 x 12 mm Speed, horizontal: 110 – 1,230 rpm Speed, vertical: 150 – 1,660 rpm Quill travel, vertical: 60 mm Main motor: 3.0 kW Dimensions: 1,342 x 1,380 x 1,670 mm Net weight: approx. 900 kg

Condition: new, bore capacity in steel (diameter) 30 mm throat 254 mm bore stroke 120 mm 4 Motor output 9 speeds 120 - 1810 U/min column diameter 92 mm table surface area 475 x 425 mm total power requirement 1,1 kW dimensions 915 x 450 x 1705 mm weight ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard Dkodpjq Nrmrjfx Ap Isu * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: new, bore capacity in steel (diameter) 40.0 mm threading M 24 throat 293 mm bore stroke 120 mm morse taper 3 Kurzspindel MK table: 515 x 360 mm turning speeds 80 - 1125 U/min feed 0.10 + 0.20 mm/U column diameter 115 mm distance spindle /table 117 / 701 mm total power requirement 1.0 / 1.6 kW weight 270 kg height of the machine 1840 mm Furnishing: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse - Operating instructions in German including special equipment: Dedpfx Ajxaar Rep Isku - Thread cutting device pos. 20.0 (Thread cutting with stop) - Coolant device "B" pos. 25.

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. Dksdjkahu Ropfx Ap Isu

Condition: as good as new (ex-display), Year of construction: 2025, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm threading M 24 in Stahl throat 320 mm morse taper 4 MK bore stroke 160 mm turning speeds 65 - 3250 U/min table: 500 x 420 mm throat 320 mm weight 375 kg range L-W-H 600 x 870 x 2170 mm Year 2025 showroom model (!!) Approx. 1 hour of operation Special price on request Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running Dksdjxaabrspfx Ap Ieu - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, MT 4/2 - coolant device - Thread cutting device - Electromagnetic spindle feed - Automatic tool ejector - LED machine light - First filling with Shell Tellus 46 - Digital speed display - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 350 - 1.590 mm workpiece height max. 645 - 1.240 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 980 x 1.600 mm threading 42 M quill stroke 320 mm total power requirement 4,0 kW weight of the machine ca. 3.500 kg. range L-W-H 2450 x 980 x 2840 mm Description : Dedpfx Ajxaad Tsp Isku - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 30 mm throat 270 mm bore stroke 125 mm 4 Motor output 9 speeds 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design * Industrial engine * Quiet running spindle thanks to new spindle design * Machine operation with safety electronics in 24 V direct current * Guaranteed concentricity = 0.02 mm in the measured drilling spindle * Clockwise/counterclockwise rotation * Precision spindle bore * Control panel with user-friendly, dirt and water resistant * Membrane keyboard * RPM display * Separate emergency stop button * Tapping function * Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and Dkedpfx Aeun Um Eep Ieu rotated by 360° * Drilling depth stop * LED machine light integrated in the drill head * V-belt cover with safety switch * Thick-walled steel column for high power absorption and stability * Solid, large base plate with T-slots * Execution of the entire machine Scope of delivery: - Keyless drill chuck 0 - 16 mm - T-Nuts -expectors - Operating tool - BMP 160 machine vice

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm - 23 drilling spindles, drilling pitch 32 mm Dodszk N Atspfx Ap Ioku - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm - with chassis Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), EDGE BANDING and CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Flexa 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Flexa 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Flexa 912: mm 100 /1350 (o 650+650) 238000A) “DOUCET” motorised roller conveyor for feeding panels to the “HOMAG” edge-bander 238000B) “HOMAG” edge-banding machine, Model KL 73/A3/S2 238000C) “DOUCET” motorised roller conveyor for feeding edged panels to “MORBIDELLI” Flexa 912 238000D) “MAHROS” 90° transfer unit (infeeding “MORBIDELLI” Flexa 912) 238000E) "MORBIDELLI" Gantry (Portal) CNC (Drilling and Routering) Mod. Flexa 912 - N. 2 upper working head, EACH consisting of: - 1 type T35M drilling head with 35 vertical spindles (21 on the Y-axis + 14 on the X-axis) - 1 (movable) drilling head with 14 vertical spindles (on the Y-axis) for fittings - 2 heads with 2 horizontal spindles each (4 total) on the Y-axis - 1 HKS 63 vertical electric spindle (6.6 kW) Dkodpfx Ajzza Rvep Ieu - N.2 horizontal units (1 R + 1 L) EACH with 21 drilling spindle (21 + 21 = total 42) 238000F) “MAHROS” 90° transfer unit (outfeeding “MORBIDELLI” Flexa 912) 238000G) "RBO (BIESSE)" Stacker (Bridge Frame), double station Mod. Selecta SC

Condition: good (used), Year of construction: 2006, Boring power 35.0 / 40.0 mm bore capacity in cast iron 50.0 mm threading M 30 bore stroke 150 mm Size of table plate 730 x 210 mm Center of spindle to wall or column 280 mm Speed 80.0 - 1.400 U/min distance spindle /table 85 - 755 mm spindle taper MT 4 MK Dksdpfx Apozl E Ubs Iou column diameter 120 mm feed 0.1 / 0.2 / 0.3 mm/U voltage 400 V Motor output 1.3 / 2.3 KW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF)

Condition: new, 15000 kg height 790 - 1350 mm width 1400 mm ja 790 - 1350 mm 120 x 1400 mm Support stand, assembly stand, steel stand, welding table, assembly table, Dksdpjyt R I Rsfx Ap Iju steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - CE marking - Transport on request

Condition: used, bore capacity in steel (diameter) 40 mm throat 380 mm bore stroke 160 mm 4 speeds 60 - 1250 U/min total power requirement 3,3 kW weight 900 kg Features: Dkjdpfx Aexddtyep Ieu -Gear drilling machine with a robust design -Column-mounted drilling table -Right/left rotation -Feed -Coolant system

Condition: new, 5000 kg height 800 mm width 1200 mm nein 1200 x 100 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - Transport on request Djdoxylnqopfx Ap Isku - CE marking

Condition: used, bore capacity in steel (diameter) 15 mm throat 220 mm bore stroke 80 mm 2 speeds 320 - 1600 U/min table-size 350 x 285 mm weight 125 kg dimensions 700 x 600 x 1500 mm Djdpfx Apsyf N Ere Isku Features: - Microdosing - Thread cutting M2-10

Condition: new, bore capacity in steel (diameter) 23.0 mm throat 250 mm bore stroke 100 mm morse taper 2 MK table: 370 x 300 mm Dodpfxjxabwzj Ap Ieku turning speeds 225 - 4300 U/min column diameter 90.0 mm distance spindle /table 140 / 670 mm engine output 0.6 / 0.95 kW weight 175 kg Machine height 1770 mm Furnishing : - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor protection switch - Infinitely variable speed adjustment - Digital speed display - Protection class IP 54 - Connection plug (fully assembled, cable length 2m) - Spindle protection with electrical fuse - Painting: DD textured paint, light gray RAL 7035, anthracite RAL 7016

Condition: new, bore capacity in steel (diameter) 32.0 mm threading max. M 24 throat 265 mm bore stroke 150 mm Dsdpfexabxrsx Ap Ieku morse taper 3 MK turning speeds 320 - 1820 U/min table-size 332 x 332 mm T-slots 14.0 mm column diameter 100 mm 400 x 380 mm distance spindle/base plate max. 735 mm voltage 400 V total power requirement 2.2 kW weight 246 kg range L-W-H 520 x 920 x 1380 mm Description: - robust table drilling machine with thread cutting device - very smooth running thanks to pulleys made of gray cast iron - drive: V-BELT - quality ball bearings ensure a high concentricity of the spindle - large drilling table with diagonally running T-slots - drilling table height adjustment via rack - thread cutting device - powerful and high-torque aluminum motor in accordance with IP 54 - standard with T-slots in the ground base plate - ergonomic handles for comfortable working - foldable drilling spindle guard - emergency stop button at the front - manual drilling depth adjustment - control cabinet - left with main switch