Used Wood Press for sale (40,081)

Condition: excellent (used), Catalogue no.: 7815 TECHNICAL DATA Worktable dimensions (L/W): 2900x1200mm Laodpoxwygcjfx Agzjk Overall table dimensions: 3000x1300mm Operating temperature: ±40-60°C Maximum temperature: ±60°C Total machine power: 5.25kW Vacuum pump power: 0.90kW Vacuum pump capacity: approx. 25/30m3/h Noise level: approx. 70dB Dimensions (L/W/H): 3060x1400x1400mm Weight: 360kg – DTR Documentation – Unpainted – Very good condition – Used press Net price: 21,900 PLN Net price: 5,200 EUR depending on the exchange rate of 4.2 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2008, table length: 2,000 mm, pressing force: 250 t, controller manufacturer: SIEMENS, controller model: S7 300, CONTROLS .. electronic controls SIEMENS S7 300 PRESS DESIGN .. drive system: eccentric / crank .. openings in uprights: yes .. number of suspensions: 2 .. table cushion: no .. quick die change system: yes PRESS FORCES .. total force (nominal): 250 to PRESS TABLE .. table surface (left-right): 2000 mm .. table surface (front-back): 1100 mm .. height above floor level: 1105 mm .. opening in bed (left-right): 1700 mm .. opening in bed (front-back): 305 mm SLIDE .. table surface (left-right): 2080 mm .. table surface (front-back): 1000 mm .. stroke rate (max.): 120 /min SLIDE (MECHAN. PRESS) .. slide adjustment: 120 mm .. stroke adjustment: yes .. stroke min.: 20 mm .. stroke max.: 180 mm TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 500 mm .. distance between columns (H-frame): 2055 mm .. passline opening (free passage in side columns): 810 mm DECOILER .. sheet width max.: 300 mm .. coil weight max.: 2 to .. max. diameter of coil: 2000 mm .. mandrel expansion range up to: 550 mm LEVELLER UNIT .. sheet width max.: 310 mm .. number of leveller rolls: 7 .. diameter of leveller rolls: 80 mm Lasdex Nmmcspfx Agzsk STRIP-FEEDER .. feeder type: roll feeder .. sheet width max.: 200 mm .. sheet thickness max.: 4 mm .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. total power consumption: 95 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4800 mm .. space requirements -front/back-: 2750 mm .. total height: 5400 mm .. total weight approx.: 57000 kg ATTACHMENTS (PRESSES) .. decoiler: yes .. leveller unit: yes .. European CE standards: yes Machine hours: 20,391 h (operating hours) Adjustment strokes: 20, 39, 69, 99, 125, 148, 165, 175, 180 mm Equipment: - External connecting rods for high tilt stability - Hydraulic overload protection - Press force monitoring - Temperature sensors at the bearing points - ABS AHM 2.0T decoiler (1999) - PBK RSD 8/6/300 straightener (2010) - Loop belt control - LW-060-02 roller feed (2008) - Advanced central lubrication system - Press force monitoring - Temperature sensors at the bearing points - Hydraulic tool clamps - Spring-loaded machine feet - Optional: Bilz air springs for an additional €7,000

Condition: good (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Throughput: up to a maximum of 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Lsdpfx Agjw Hpizozoak Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Extraction system available as a hopper attachment. Requirements: Input material should ideally be shorter than 25 mm chip length Moisture content: 6-12% (oven-dry basis) Machine suitable for intermittent operation. For example, up to 2.5 hours briquetting; 1 hour pause, etc. If the machine is to operate continuously for longer than 2.5 hours at a time, an optional cooling system must be connected.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Just arrived: RUF briquetting press, Type RUF 200, for biomass, year of manufacture 2011 Technical data Manufacturer: Ruf GmbH & Co. KG Model: RUF 200 Year of manufacture: 02/2011 Lajdpox Ir Ayefx Agzek Total power: 14.5 kW Control system: Siemens S7 Specific pressing pressure: 1,700 kg/cm² Maximum throughput capacity: Biomass: 200 kg/h PU: 80-160 kg/h Briquette format: 150x60 mm Dimensions: 1,800 x 1,600 x 2,000 mm (LxWxH) Weight: approx. 3,200 kg Materials: wood, paper, textile dust, agricultural residues The press is particularly suitable for small quantities of dust, shavings, or wood chips. It was used for briquetting textile dust. Please note: All technical data is based on manufacturer information. We accept no liability for the details provided or any potential errors. The offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale is ex-works, prepayment required, without warranty or guarantee.

Condition: used, axle configuration: 3 axles, first registration: 10/2013, loading space length: 13,500 mm, loading space width: 2,490 mm, loading space height: 2,620 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 8,800 mm, color: other, Year of construction: 2013, Equipment: ABS, tail-lift, = Additional options and accessories = - EBS - Tail lift = Notes = Number of axles: 3, Payload: 31,180 kg, Unladen weight: 7,820 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Body build year: 2013, Axle type: BPW, Tail lift, Tail lift design: fold-under tail lift, Tail lift capacity: 2,000 kg, Tail lift material: steel and aluminium, Tail lift dimensions: 165x240, Battery for ramp, 2,000 KG TAILLIFT = Further information = General information Cab: Day cab Registration number: ON-89-BT Driveline Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tyre size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tyre tread left: 12 mm; Tyre tread right: 8 mm Axle 2: Tyre tread left: 6 mm; Tyre tread right: 4 mm Axle 3: Tyre tread left: 4 mm; Tyre tread right: 6 mm Weights Unladen weight: 7,820 kg Payload: 31,180 kg gross vehicle weight (GVW): 39,000 kg Functional Tail lift: under-run flap, 2,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damage: none Lodpfx Agox H I Amszeak = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Verified quality • Competitive price • Professional business conduct • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates quickly arranged • Professional technical services • The assurance of "recognizable quality" • And more…. Please visit our website for special offers and to view our complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your lease rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, L 5990 mm, W 2500 mm, H 2700 mm. Weight 4451 kg Ljdpfx Agjvkn Irszsak

Condition: excellent (used), Catalogue number 7811 TECHNICAL DATA - Compression force: hydraulic Ljdpfxsxxlb Uj Agzoak - Briquette shape: round - Briquette diameter: 60 mm - Hopper diameter: 990 mm - Throughput: approx. 70 kg/h - Automatic machine operation - Inspection window - Motor: 5.59 kW - Max. operating pressure: 150 bar - Dimensions (L/W/H): 1700x1350x1550 mm - Weight: approx. 1100 kg ADVANTAGES – Italian manufacture – Used briquetting press – Inspection window – Very good condition Net price: 35,900 PLN Net price: 8,550 EUR based on an exchange rate of 4.2 EUR (Prices may change due to exchange rate fluctuations)

Year of construction: 2020, condition: ready for operation (used), Additional Equipment Drive, opening, and drawer motors Servo motors for block positioning Lasdsx H U Ayjpfx Agzsk High-power hydraulic system This MAQUINARIA LDM VPS 2103 was manufactured in 2020. An industrial automated system for wood production, it features a hydraulic nailing system, chain-driven pallet transport, and servo motors for precise block positioning. It operates on 220V or 380V and handles pallet widths from 800 mm to 1500 mm. Safety certified under EN 12100 standards. Contact us for more information about this machine. Application Types Complete Production

Condition: new, Year of construction: 2025, operating hours: 9 h, Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Laodpogl Nlmjfx Agzok Silo content: approx. 0.7 square meters Pump: 27 liters Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2014, operating hours: 7,145 h, functionality: fully functional, Baler Presto HPK 50 HS, Year of Manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of Manufacture: 2014 Drive: 30 kW Pressing Force: 50 t Operating Hours: 7145 Filling Opening: 1600 x 650 mm (L x W) Channel Cross Section: 700 x 950 mm Maximum Filling Volume: 1.06 m³ Cycle Time: 20 s Tying: 4-fold Throughput Capacity at Lodpfx Asx Irx Uegzsak 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine Weight: approx. 10,500 kg Materials: Paper, Cardboard, Film, PET Bottles Remarks: Blades and counter-blades as well as all sliding plastics have been replaced. The baler is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Operating manuals and CE declaration are available. Inspections, including under power, are possible by appointment at any time. Upon request, we also conduct tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer’s specifications. We assume no liability for the information provided or for any potential errors. The offer is non-binding and subject to prior sale and revocation at any time. Viewings are possible by arrangement. Sale is ex works against advance payment, without warranty or guarantee.

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Ljdpfjvviytsx Agzeak Storage location: Nattheim

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Laedpfx Aovkn Nvsgzsk

Condition: good (used), Year of construction: 2013, functionality: fully functional, Baler Dixi 60 SLS, Year of manufacture 2013 Technical Data: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2013 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370-450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Viewings, including under power, are possible at any time by appointment. Material trials with your production waste can be arranged upon request for a handling fee. Should you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Lajdpfex Irxuex Agzsk Please note: All technical data is provided as specified by the manufacturer. We do not assume any liability for the information given or for possible errors. This offer is subject to change, prior sale reserved, and can be withdrawn at any time. Inspections are possible by appointment. The sale is ex works, based on advance payment, without warranty or guarantee.

Condition: good (used), Year of construction: 2026, functionality: fully functional, Baler Dixi 60 SLS, Year of manufacture: 2016 Technical specifications: Manufacturer: Maschinenfabrik Bermatingen Year of manufacture: 2016 Pressing force: 60 t Drive power: 11 kW, 32 A Feed opening: 990 x 1110 mm (W x L) Bale dimensions: 1100 x 800 x 1200 mm Bale weight: approx. 370–450 kg Tying: 3-fold manual Machine dimensions: approx. 4870 x 2100 x 2150 mm (L x W x H) Weight: approx. 5220 kg Materials: PET, paper, cardboard, film Lodpfx Agox Irxhjzoak The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are included. Inspections, including under power, are possible by appointment at any time. Upon request, we can also carry out tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical information is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. The offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Laedpfx Agsx Irw Rozok Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film The baler is in good condition. Operator's manual and CE declaration are available. Inspection can be arranged at any time, including under power. Upon request, we can also carry out test runs with your material for a handling fee. We are happy to answer your questions about the machine by phone from Monday to Thursday from 08:00 to 14:00. On Fridays we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not assume liability for the given data or possible errors. Offer is subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2017, operating hours: 1,640 h, functionality: fully functional, Baler Presto CC 40 M Technical specifications: Manufacturer: Presto Model: CC 40 M Year of manufacture: 2017 Pressing force: 40 t Cycle time: 34 s Drive power: 15 kW Feed opening: 1080 x 1100 mm Feed volume: 0.85 m³ Tying: 4-fold, polyester strapping, manual Throughput at bulk density of 35 kg/m³ – 1.8 t/h 60 kg/m³ – 2.5 t/h 100 kg/m³ – 3.1 t/h Bale dimensions: 750 x 1100 mm Bale weight: 400 kg Dimensions: 3650 x 1590 x 2010 mm (LxWxH) Machine weight: approx. 3800 kg Materials: Paper, cardboard, film The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. The operating manual and CE declaration are available. Ledpex Irw Defx Agzjak Note: Channel exit is fully automatic and self-regulating. Inspections, including powered demonstrations, are possible at any time by prior arrangement. Upon request, we can also perform tests with your material for a nominal fee. If you have any questions about the machine, we are happy to assist you by phone from Monday to Thursday between 08:00 and 14:00, and Friday from 08:00 to 13:00. Please note: All technical data are based on manufacturer information. We do not assume any liability for the supplied information or possible errors. This offer is subject to change, prior sale excepted, and may be withdrawn at any time. Inspections are available by appointment. Sale is ex works, advance payment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Baler Austropressen AP 25, semi-automatic, with lifting-tipping device for wheelie bins (MGB) Technical Specifications: Manufacturer: Austropresse Model: AP 25 Lajdpfxox Irvyj Agzok Year of manufacture: 2020 Pressing force: 25 t Cycle time: 35 s Drive power: 7.5 kW Feed opening: 1500 x 940 mm Binding: 3-fold, manual Bale size: 1000 x 750 x 1200 mm Bale weight: 200-300 kg Machine weight: approx. 3400 kg Materials: paper, cardboard, film, metals, foams, etc. Note: The baler is in very good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Complete documentation is included. Inspection, including live demonstration, is possible at any time by prior arrangement. On request, we can also carry out tests with your material for a nominal charge. If you have any questions about the machine, we are happy to advise you by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer information. We accept no liability for the specifications or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Condition: used, Year of construction: 1979, functionality: fully functional, Baler Paal Pacomat II with hopper, year of manufacture 1979 Technical Data: Manufacturer: Paal Model: Pacomat II Year of manufacture: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Feed opening: 1000 x 650 mm Throughput: approx. 60/115 m³/h Bale dimensions: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials processed: Paper, Cardboard, Film Ljdpfex Irvaex Agzeak Remarks: The machine is in fully functional condition. It was inspected and tested at our site in 28816 Stuhr. Video footage is available on our website or YouTube channel. Inspection, including powered operation, is possible at any time by appointment. Upon request, we can also carry out tests using your material for a handling fee. If you have questions about the machine, we are happy to assist you by phone from Monday to Thursday, 08:00 to 14:00. On Friday, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer information. We accept no liability for the information provided or for possible errors. Offers are non-binding, subject to prior sale and may be withdrawn at any time. Inspections are possible by arrangement. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, cartons Operating manual is available. Note: The baler is in very good condition. It has been inspected and tested at our location in 28816 Stuhr. The video can be found on our website or YouTube channel. The hydraulic hoses should be replaced. Inspections, including powered demonstrations, are possible at any time by arrangement. Upon request, we will also conduct tests with your material for a nominal fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Laedpfx Aex Irucogzjk Please note: All technical data is based on manufacturer’s specifications. We do not assume liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Baler Presto CC 13 V, Year of manufacture: 2003 Technical data: Manufacturer: Presto Model: CC 13 V Year of manufacture: 2003 Lasdpfx Ajx Irtrsgzok Pressing force: 13 t Cycle time: 24 s Drive power: 4 kW Feed opening: 780 x 750 mm Feed volume: 0.39 m³ Tying: 3-fold, automatic Throughput capacity for bulk density of: 35 kg/m³ - 1.7 t 60 kg/m³ - 2.5 t 100 kg/m³ - 3.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 250 kg Dimensions: 2800 x 1050 x 1830 mm (LxWxH) Machine weight: approx. 1900 kg Materials: paper, cardboard, film Note: The baler is in good condition and has been function-tested. You can find a video on our website or YouTube channel. Inspections, including under power, can be arranged at any time by appointment. Upon request, we can also perform tests with your material for a handling fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on the manufacturer’s information. We accept no liability for the provided information or potential errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are available by appointment. Sale is ex works, prepayment only, without warranty or guarantee.

Condition: good (used), Year of construction: 2019, operating hours: 1,022 h, functionality: fully functional, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical data: Lodpfex Irlzox Agzeak Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Filling opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput capacity at bulk density of 35 kg/m³ - 1.6 t 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: paper, cardboard, film Note: The machine is in good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find a video on our website or YouTube channel. Inspections, including under power, are possible at any time by appointment. Upon request, we can also conduct tests with your material for a service fee. We are happy to answer any questions about the machine by phone from Monday to Thursday, 08:00 to 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We accept no liability for the information given or for any potential errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. The sale is ex location, without warranty or guarantee.

Condition: good (used), Year of construction: 2015, operating hours: 1,932 h, functionality: fully functional, Baler Presto CC 50 M, semi-automatic, year of manufacture 2015, with lifting-tilting device Technical Data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Binding: 3-fold, wire, manual Throughput capacity at bulk weight: - 35 kg/m³: 1.3 t - 60 kg/m³: 1.7 t - 100 kg/m³: 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4000 kg Materials: Paper, cardboard, film The operating manual is available in German. Note: The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find a video on our website or YouTube channel. Viewings, including under power, are possible by appointment at any time. On request, we can also carry out tests with your material for an additional fee. If you have any questions about the machine, we will be happy to assist you by phone from Monday to Thursday from 08:00 to 14:00. On Fridays from 08:00 to 13:00. Lajdpex Iri Hofx Agzsk Please note: All technical data is based on manufacturer specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Viewings are possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, year of manufacture 2000, optionally available with matching Paal KEM-1400 conveyor belt Technical specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale size: 750 x 1100 mm, variable length Tying: fully automatic with 4-fold wire Throughput: at 35 kg/m³: approx. 9.5 t/h at 60 kg/m³: approx. 16.5 t/h at 100 kg/m³: approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Ledpsx Iritefx Agzsak Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The baler was dismantled from running operation. Complete documentation available. Please note: All technical data is based on manufacturer information. We assume no liability for the stated data or for potential errors. The offer is subject to change, prior sale and revocation at any time. Inspections are possible by appointment. Sale takes place ex works, prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, functionality: fully functional, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Lodpex Irigofx Agzeak Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 15,350 h, functionality: fully functional, Europress EP 6500 V5 H4, Cross Tying, Year of Manufacture 2009 Technical Specifications: Manufacturer: Europress Model: 6500 V5 H4 Year of Manufacture: 2009 Operating Hours: approx. 15,334 hours Number of Bales: 138,097 bales Main Press Force: 120 t Specific Press Force: 142 kg/cm² Feed Hopper Dimensions: 1,650 x 1,100 mm Filling Volume: 3 m³ Filling Volume per Press Cycle: 1.58 m³ Bale Dimensions: 730 x 1,100 mm Drive Power: 75 kW (1 x 30 kW + 1 x 45 kW, individually switchable) Total Connected Load: 83 kW Current Consumption: 150 A Tying: 5-fold vertical, 4-fold horizontal, fully automatic Bale Weight: 450–900 kg Hydraulic Tank Capacity: 1,200 L PLC Control: Siemens S7-200 Control Panel: Siemens Touchscreen Press Dimensions (assembled with hopper): 13,465 x 5,200 x 5,074 mm Transport Dimensions Press: 9,965 x 2,500 x 2,900 mm (L x W x H) Press Weight: approx. 28 t Work Carried Out on the EP 6500 V5: - Completely derusted and repainted - Inner steel floor of the press completely renewed - Ram (steel structure) overhauled - Complete overhaul of the horizontal and vertical lance boxes - Complete renewal of internal Hardox wear plating - All hydraulic hoses new - Both hydraulic cylinder lifters renewed - Knives and counter knives replaced - All hydraulic cylinders resealed and tested - All slide and guide plastics replaced - Wire deflection pulleys renewed - Replacement of various cables and sensors - Replacement of various electrical components (control cabinet) - Complete inspection of electrics/control system - Complete hydraulic pressure inspection Remarks: The machine has been overhauled, inspected, and tested by us. You can find the video on our website or YouTube channel. Lasdjx Irh Nopfx Agzek Inspections, including powered tests, are possible at any time by prior arrangement. If you have any questions regarding the machine, we are happy to assist you by phone Monday to Thursday from 08:00 to 14:00, and Friday from 08:00 to 13:00. Please note: All technical data is based on information provided by the manufacturer. We do not accept liability for the accuracy of the information or for possible errors. Offers are subject to change, prior sale, and withdrawal at any time. Inspections are possible by prior arrangement. The sale is ex location, without any warranty or guarantee.